
UF2001 - UF2007
2.0A ULTRA-FAST RECTIFIER
Features
• Diffused Junction
• Ultra-Fast Switching for High Efficiency
• Surge Overload Rating to 60A Peak
• Low Reverse Leakage Current
• Lead Free Finish, RoHS Compliant (Note 4)
Mechanical Data
• Case: DO-15
• Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
• Terminals: Finish – Tin. Solderable per MIL-STD-202,
Method 208
• Polarity: Cathode Band
• Marking: Type Number
• Ordering Information: See Page 3
• Weight: 0.4 grams (approximate)
DO-15
Dim Min Max
A 25.40 ⎯
B 5.50 7.62
C 0.686 0.889
D 2.60 3.60
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
DS25007 Rev. 4 - 2
1 of 3
www.diodes.com
UF2001 - UF2007
© Diodes Incorporated
Characteristic Symbol UF
2001 UF
2002 UF
2003 UF
2004 UF
2005 UF
2006 UF
2007 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 5)
VRRM
VRWM
VR 50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current
(Note 1) @ TA = 50°CIO 2.0 A
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-Wave Superimposed on Rated Load IFSM 60 A
Forward Voltage @ IF = 2.0A VFM 1.0 1.3 1.7 V
Peak Reverse Current @ TA = 25°C
at Rated DC Blocking Voltage (Note 5) @ TA = 100°CIRM 5.0
100 μA
Reverse Recovery Time (Note 3) trr 50 75 ns
Typical Total Capacitance (Note 2) CT 50 30 pF
Typical Thermal Resistance Junction to Ambient RθJA 50 °C/W
Operating and Storage Temperature Range TJ, TSTG -65 to +150 °C
Notes: 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Measured at IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5.
4. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7.
5. Short duration pulse test used to minimize self heati ng e ffect.