Industrial automation
Distributed power architecture system
Wireless/telecommunication solution
Redundant power system
Electric vehicle charger system
Constant current source system
■Model Encoding / Order Information
■Description
RCP-1600 is a 1.6KW single output rack mountable front end AC/DC power supply with a 1U low profile
and a high power density up to 25W/inch . This series operates for 90~264VAC input voltage and offers
3
the models with the DC output mostly demanded from the industry. Each model is cooled by the built-in
DC fan with fan speed control, working for the temperature up to 70 . RCP-1600 provides vast design
℃
flexibility by equipping various built-in functions such as the PMBus and CANBus communication protocol,
output programming, active current sharing (up to 24000W via three 19 rack shelves, RHP-1U), remote ”
control, auxiliary power, alarm signal, etc. Maximum number that can be monitored by master controller
in communication shall be 15 power supplies.
Universal AC input / Full range
(Withstand 300VAC surge input for 5 seconds)
Built-in active PFC function
High efficiency up to 93%
Forced air cooling by built-in DC fan
Output voltage and constant current level programmable
Built-in OR-ing FET, support hot swap (hot plug)
Active current sharing up to 8000W for one 19 rack shelf”
Built-in I C interface, PMBus protocol
2
(Optional CANBus protocol)
Protections: Short circuit / Overload / Over voltage /
Over temperature
Optional conformal coating
5 years warranty
■Features ■Applications
1600W Rack Mountable Front End Rectifier RCP-1600 series
Output wattage
Output voltage
Communication protocol option
24RCP - -1600
3.35
Dimension
L
300
11.8
W
85
H
41 (1U)
(1U)
mm
inch1.61
*
*
*
*
*
*
File Name:RCP-1600-SPEC 2020-03-27
Type Communication Protocol
CAN
Blank PMBus protocol
CANBus protocol
Note
By request
In Stock
※ Note 1: 19" rack shelf, RHP-1U, available. Details available on http://www.meanwell.com/
※ Note 2: Control/Monitor unit, RKP-CMU1, available. Details available on http://www.meanwell.com/
UL62368-1 TPTC004 IEC62368-1EN62368-1
Bauar
Sicherheit
egel gema
t gepruft
od
be
www.
ID 2000000000
tuv.com
wac g
os
Series name
SPECIFICATION
1600W Rack Mountable Front End Rectifier RCP-1600 series
File Name:RCP-1600-SPEC 2020-03-27
RCP-1600-12 RCP-1600-24
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT VOLTAGE ADJ. RANGE Note.6
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE Note.5
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
INPUT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
AC CURRENT (Typ.) Note.5
12V 24V
125A 67A
0 ~ 125A 0 ~ 67A
1500W 1608W
150mVp-p
11.5 ~ 15V
200mVp-p
23.5 ~ 30V
±1.0% ±1.0%
±0.5%
±0.5%
1500ms, 60ms/230VAC at full load
16ms / 230VAC at 75% load 10ms / 230VAC at full load
90 ~ 264VAC 127 ~ 370VDC
47 ~ 63Hz
0.97/230VAC at full load
88.5%
COLD START 35A/230VAC
14A/115VAC 8A/230VAC 15A/115VAC 8.5A/230VAC
<1.5mA / 230VAC
RCP-1600-48
48V
33.5A
0 ~ 33.5A
1608W
300mVp-p
47.5 ~ 58.8V
±1.0%
±0.5% ±0.5%
±0.5% ±0.5%
RIPPLE & NOISE (max.)
Note.2
VOLTAGE TOLERANCE Note.4
91% 93%
OVER TEMPERATURE
OVERLOAD
OVER VOLTAGE
105 ~ 115% rated output power
Protection type : Constant current limiting, unit will shut down o/p voltage after 5 sec. re-power on to recover
15.75 ~ 18.75V
Protection type : Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, recovers automatically after temperature goes down
31.5 ~ 37.5V 63 ~ 75V
PROTECTION
Adjustment of output voltage is allowable to 40 ~ 125% of nominal output voltage(60~125% for 12V).
Please refer to the Function Manual in following pages.
FUNCTION
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-30 ~ +70 (Refer to "Derating Curve")℃
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH non-condensing℃
±℃ ℃0.03%/ (0 ~ 50 )
ENVIRONMENT
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS
WITHSTAND VOLTAGE
UL62368-1, CAN/CSA C22.2 , TUV EN62368-1 EAC TP TC 004 approved
,No. 62368-1
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC (0.5KVAC for 12V)
ISOLATION RESISTANCE
MTBF
DIMENSION
PACKING
OTHERS
162.2K hrs min. Telcordia SR-332 (Bellcore) ; 39.3K hrs min. MIL-HDBK-217F (25 )℃
300*85*41mm (L*W*H)
SAFETY &
EMC
(Note 7)
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
1.87Kg; 6pcs/12.2Kg/1.16CUFT
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Under parallel operation ripple of the output voltage may be higher than the SPEC at light load condition. It will go back to normal ripple level once the
output load is more than 5%.
4. Tolerance : includes set up tolerance, line regulation and load regulation.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
6. PV/PC functions when users are not operating on PMBus/CANBus. SVR functions when users are neither operating on PMBus/CANBus nor using PV/PC.
7. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.720 360 For guidance on how to
perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
8. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
EMC IMMUNITY
EMC EMISSION
Parameter
Parameter
ESD
Radiated
EFT / Burst
Surge
Conducted
Magnetic Field
Voltage Dips and Interruptions
Conducted
Radiated
Harmonic Current
Voltage Flicker
EN55024 , EN61204-3, EN61000-6-2
Standard
Standard
EN55032 (CISPR32)
EN55032 (CISPR32)
EN61000-3-2
EN61000-3-3
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
Test Level / Note
Test Level / Note
Level 3, 8KV air ; Level 2, 4KV contact
Level 3
Level 3
Level 4, 2KV/Line-Line 4KV/Line-Earth
Level 3
Level 4
>95% dip 0.5 periods, 30% dip 25 periods,
>95% interruptions 250 periods
Class B
Class A
-----
-----
ALARM SIGNAL
AUXILIARY POWER
Isolated TTL signal output for T-Alarm, AC-OK and DC-OK
5V @ 0.3A, 12V @ 0.8A
REMOTE SENSE
REMOTE ON OFF CONTROL-
Compensate voltage drop on the load wiring up to 0.5V. Please refer to the Function Manual in following pages.
By electrical signal or dry contact Power ON:short Power OFF:open. Please refer to the Function Manual in following pages.
OUTPUT VOLTAGE
PROGRAMMABLE(PV) Note 6
OUTPUT CURRENT
PROGRAMMABLE(PC) Note 6 Please refer to the Function Manual in following pages.
Adjustment of constant current level is allowable to 20 ~ 100% of rated current.
PFC fosc : 90KHz
PWM fosc : 70KHz
AMBIENT TEMPERATURE ( )℃
LOAD (%)
230VAC
Input only
-30 -25 0-10 15 30 50 60 70
20
40
60
50
80
100
(HORIZONTAL)
LOAD (%)
INPUT VOLTAGE (VAC) 60Hz
90 100 115 180 264
80
90
100
70
60
50
40
30
Derating Curve
Static Characteristics Derating Loads vs Input Voltage
81
82
83
84
85
86
87
88
89
90
91
92
93
94
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Efficiency vs Load (48V Model)
EFFICIENCY (%)
LOAD
◎The curve above is measured at 230VAC.
1600W Rack Mountable Front End Rectifier RCP-1600 series
File Name:RCP-1600-SPEC 2020-03-27
Block Diagram
MODEL
INPUT 12V
1500W
1200W
1050W
900W
1608W
1286.4W
1125.6W
964.8W
1608W
1286.4W
1125.6W
964.8W
125A
100A
87.5A
75A
67A
53.6A
46.9A
40.2A
33.5A
26.8A
23.45A
20.1A
180~264VAC
115VAC
100VAC
90VAC
24V 48V
LIMITING
ACTIVE
CURRENT
INRUSH
CONTROL
I/P RECTIFIERS
&
FILTER
SWITCHING
POWER
RECTIFIERS
FILTER
EMI
PWM CIRCUIT
DETECTION
POWER
AUX
&
PFC
FILTER
&
12V/0.8A
AUX POWER
PFC
CONTROL
5V/0.3A
MCU
DETECTION
CIRCUIT
O.V.P.
MCU
O.T.P.
DA/DB
PV/PC
DC-OK
AC-OK
SDA/SCL
(CANH/CANL)
T-Alarm
Remote ON-OFF
FAN
+V
RECTIFIERS
ORING
FET
-V
ORING FET
CONTROL
TRANSCEIVERS
DATA
ISOLATION
+S
-S
Function Manual
※In addition to the adjustment via the built-in potentiometer, the output voltage can be trimmed to 40~125% of the nominal voltage by applying
EXTERNAL VOLTAGE.
2. Output Voltage Programming (or, PV / remote voltage programming / remote adjust / margin programming / dynamic voltage trim)
EXTERNAL VOLTAGE (DC)
※The Remote Sense compensates voltage drop on the load wiring up to 0.5V
1.1 Remote Sense
1.2 Local Sense
※ The +S,-S have to be connected to the +V(signal),-V(signal), respectively, as the following diagram, in order to get the correct output voltage if Remote
Sense is not used.
1. Voltage Drop Compensation
Sense lines should be twisted in pairs to minimize noise pick-up.
LOAD
LOAD
-V
-V
+V
+V
PIN31 -S
PIN31 -S
PIN28 +V(signal) PIN30 +S
PIN29 -V(signal)
PIN27 PV
PIN30 +S
PIN29 -V(signal)
◎The +S signal should be connected to the positive terminal of the load whereas -S signal to the negative terminal.
60 80 100 125 V
100
40
60
80
20
OUTPUT CURRENT (%)
OUTPUT VOLTAGE (%)
40
40
60
OUTPUT VOLTAGE(%)
EXTERNAL VOLTAGE (DC)
100
125
Vout
0.40 1 4.7 5 V
Non-Linear
12V
Others
1600W Rack Mountable Front End Rectifier RCP-1600 series
File Name:RCP-1600-SPEC 2020-03-27
◎The rated current should change with the Output Voltage Programming accordingly.
◎For Remote Sense / Local Sense, please refer to “Voltage Drop Compensation” section.
1600W Rack Mountable Front End Rectifier RCP-1600 series
File Name:RCP-1600-SPEC 2020-03-27
3. Constant Current Level Programming (or, PC / remote current programming / dynamic current trim)
Iout
V
0.4 1 4.7 5
20
100
EXTERNAL VOLTAGE (VDC)
OUTPUT CURRENT (%)
Non-Linear
110
※The constant current level can be trimmed to 20~100% of the rated current by applying EXTERNAL VOLTAGE.
EXTERNAL VOLTAGE (DC)
PIN29 -V(signal)
PIN26 PC
4. Remote ON-OFF Control
5.PMBus Communication Interface
The power supply can be turned ON/OFF individually or along with other units by using the "Remote ON-OFF" function.
RCP-1600 supports PMBus Rev. 1.1 with maximum 100KHz bus speed, allowing information reading, status monitoring, output trimming, etc. For details,
please refer to the Function Manual.
Between Remote ON-OFF and +5V-AUX
Switch Short
Switch Open
Power Supply Status
ON
OFF
switch
PIN13 +5V-AUX
PIN17 Remote ON-OFF
◎For Remote Sense / Local Sense, please refer to “Voltage Drop Compensation” section.
Mechanical Specification
Case No.250 Unit:mm
41
85
Air flow
direction
300
11max.
9max.
LED Status Indicator
42.5
12.5
5.8
7.7
3.6
CN1
※Input / Output Connector Pin No. Assignment( ) : Positronic PCIM34W13M400A1CN1
1357911 33
2468
10 13 32 34
12
13
11
15
16
14
18
19
17
21
22
20
24
25
23
27
28
26
30
31
29
62.4
SVR
7
50
1600W Rack Mountable Front End Rectifier RCP-1600 series
Note1: Non-isolated signal, referenced to [-V(signal)].
Note2: Isolated signal, referenced to GND-AUX.
The unit can turn the output ON/OFF by electrical signal or dry contact between and . (Note.2)Remote ON/OFF +5V-AUX
Short (4.5 ~ 5.5V) : Power ON ; Open (0 ~ 0.5V) : Power OFF ; The maximum input voltage is 5.5V.
Connection for constant current level programming. (Note.1)
Low (-0.1 ~ 0.5V) : When Vout 80% 5%.≧±
The maximum sourcing current is 10mAand only for output. (Note.2)
Auxiliary voltage output GND. The signal return is isolated from the output terminals (+V & -V).
High (4.5 ~ 5.5V) : When the internal temperature exceeds the limit of temperature alarm, or when fan fails.
Auxiliary voltage output, 4.5~5.5V, referenced to .GND-AUX (pin 12)
Auxiliary voltage output, 10.8~13.2V, referenced to .GND-AUX (pin 12)
The maximum load current is 0.3A. This output has the built-in "Oring diodes" and is not controlled by the control.Remote ON/OFF
The maximum load current is 0.8A. This output has the built-in "Oring diodes" and is not controlled by the control.Remote ON/OFF
Connection for output voltage programming. (Note.1)
Positive sensing for remote sense.
Negative sensing for remote sense.
Low (-0.1 ~ 0.5V) : When the internal temperature is normal, and when fan normally works.
The maximum sourcing current is 10mAand only for output. (Note.2)
Description
Positive output terminal.
For PMBus model: Serial Data used in the PMBus interface. (Note.2)
For CANBus model: Data line used in CANBus interface. (Note.2)
For PMBus model: Serial Clock used in the PMBus interface. (Note.2)
For CANBus model: Data line used in CANBus interface. (Note.2)
Low (-0.1 ~ 0.5V) : When the input voltage is 75Vrms.≦
High (4.5 ~ 5.5V) : When the Vout 80% 5%.≦±
The maximum sourcing current is 10mAand only for output(Note.2)
Negative output terminal.
Differential digital signal for parallel control. (Note.1)
PMBus / CANBus interface address lines. (Note.1)
AC Ground connection.
AC Line connection.
AC Neutral connection.
Pin No.
5,7,8,9,10
17
26
15
14
19
18
12
16
13
11
Function
+V
Remote
ON-OFF
PC
SDA
CANH
SCL
CANL
AC-OK
DC-OK
GND-AUX
T-ALARM
+5V-AUX
+12V-AUX
1,2,3,4,6 -V
28
29
24,25
27
30
31
20,21,22,23
+V (Signal)
-V (Signal)
DB,DA
PV
+S
-S
A3,A2,A1,A0
Positive output voltage signal.
Negative output voltage signal.
It is for local sense; it cannot be connected directly to the load.
It is for local sense; and certain function reference; it cannot be connected directly to the load.
32
33
34
FG
AC/L
AC/N
Mating Housing Positronic PCIM34W13F400A1
29
31
LED
Green
Red
Red (Flashing)
The power supply functions normally.
Description
The LED will present a constant red light when the abnormal status (OTP, OLP, fan fail and charging timeout) arises.
The LED will flash with the red light when the internal temperature reaches 60 ; under this condition, the unit still operates normally℃
without entering OTP In the meantime, an alarm signal will be sent out through the PMBus interface.). (
※LED Status Indicators
High (4.5 ~ 5.5V) : When the input voltage is 87Vrms .≧
File Name:RCP-1600-SPEC 2020-03-27
