Agilent HSMx-A10x-xxxxx PLCC-2 Surface Mount LED Indicator Data Sheet Features * Industry standard PLCC-2 package * High reliability LED package * High brightness using AlInGaP and InGaN dice technologies Description This family of SMT LEDs is packaged in the industry standard PLCC-2 package. These SMT LEDs have high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under harsh interior automotive as well as interior signs application conditions. To facilitate easy pick & place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel will be shipped in single intensity and color bin, except red color, to provide close uniformity. * Available in full selection of colors These LEDs are compatible with IR solder reflow process. Due to the high reliability feature of these products, they can also be mounted using through-the-wave soldering process. * Super wide viewing angle at 120 The super wide viewing angle at 120 makes these LEDs ideally suited for panel, push button, or general backlighting in automotive interior, office equipment, industrial equipment, and home appliances. The flat top emitting surface makes it easy for these LEDs to mate with light pipes. With the built-in reflector pushing up the intensity of the light output, these LEDs are also suitable to be used as LED pixels in interior electronic signs. Applications * Available in 8 mm carrier tape on 7 inch reel (2000 pieces) * Compatible with both IR and TTW soldering process * Interior automotive -Instrument panel backlighting -Central console backlighting -Cabin backlighting * Electronic signs and signals -Interior full color sign -Variable message sign * Office automation, home appliances, industrial equipment -Front panel backlighting -Push button backlighting -Display backlighting CAUTION: HSMN,M,K and E-A10x-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Agilent Application Note AN-1142 for additional details. Package Dimensions 2.8 0.2 2.2 0.2 3.2 0.2 1.9 0.2 0.1 TYP. 0.8 0.1 3.5 0.2 0.8 0.3 0.5 0.1 CATHODE MARKING (ANODE MARKING FOR AlGaAs DEVICES) TOP MOUNT 2.8 0.2 2.2 0.2 1.9 0.2 5.2 0.2 3.2 0.2 0.1 TYP. CATHODE MARKING REVERSE MOUNT NOTE: ALL DIMENSIONS IN MILLIMETERS. 2 0.5 0.1 Device Selection Guide Red Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMS-A100-J00J1 4.0 15.0 - 20 GaP HSMS-A100-L00J1 10.0 15.0 - 20 GaP HSMS-A100-H70J2 3.0 - 8.0 10 GaP HSMS-A100-J80J2 5.0 - 15.5 10 GaP HSMH-A100-L00J1 10.0 15.0 - 20 AlGaAs HSMH-A100-N00J1 25.0 50.0 - 20 AlGaAs HSMH-A100-L70J2 12.5 - 32.0 10 AlGaAs HSMH-A100-M80J2 20.0 - 62.0 10 AlGaAs HSMH-A100-P30J1 40.0 - 100.0 20 AlGaAs HSMC-A100-J00J1 4.0 100.0 - 20 AlInGaP HSMC-A100-Q00J1 63.0 100.0 - 20 AlInGaP HSMC-A100-R00J1 100.0 140.0 - 20 AlInGaP HSMC-A101-S00J1 160.0 220.0 - 20 AlInGaP HSMZ-A100-T00J1 250.0 350.0 - 20 AlInGaP HSMC-A100-P30J1 40.0 - 100.0 20 AlInGaP HSMC-A100-Q40J1 63.0 - 200.0 20 AlInGaP HSMC-A101-R80J1 125.0 - 395.0 20 AlInGaP HSMZ-A100-S80J1 200.0 - 620.0 20 AlInGaP Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMJ-A100-Q00J1 63.0 100.0 - 20 AlInGaP HSMJ-A101-S00J1 160.0 200.0 - 20 AlInGaP HSMV-A100-T00J1 250.0 350.0 - 20 AlInGaP HSMJ-A100-Q30J1 63.0 - 155.0 20 AlInGaP HSMJ-A100-R40J1 100.0 - 315.0 20 AlInGaP HSMJ-A101-R80J1 125.0 - 395.0 20 AlInGaP HSMV-A100-S80J1 200.0 - 620.0 20 AlInGaP Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMD-A100-J00J1 4.0 15.0 - 20 GaP HSMD-A100-L00J1 10.0 15.0 - 20 GaP HSMD-A100-J7PJ2 5.0 - 12.5 10 GaP HSMD-A100-K4PJ2 6.3 - 20.0 10 GaP HSML-A100-Q00J1 63.0 100.0 - 20 AlInGaP HSML-A101-S00J1 160.0 220.0 - 20 AlInGaP HSML-A100-Q7PJ1 80.0 - 200.0 20 AlInGaP HSML-A100-R7PJ1 125.0 - 315.0 20 AlInGaP HSML-A101-R8WJ1 125.0 - 395.0 20 AlInGaP Red Orange Orange 3 Device Selection Guide, continued Yellow/Amber Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMY-A100-J00J1 4.0 12.0 - 20 GaP HSMY-A100-L00J1 10.0 12.0 - 20 GaP HSMY-A100-J35J2 4.0 - 10.0 10 GaP HSMY-A100-K45J2 6.3 - 20.0 10 GaP HSMA-A100-Q00J1 63.0 100.0 - 20 AlInGaP HSMA-A101-S00J1 160.0 220.0 - 20 AlInGaP HSMU-A100-S00J1 160.0 320.0 - 20 AlInGaP HSMA-A100-Q35J1 63.0 - 155.0 20 AlInGaP HSMA-A100-R45J1 100.0 - 315.0 20 AlInGaP HSMA-A101-R8WJ1 125.0 - 395.0 20 AlInGaP HSMU-A100-S4WJ1 160.0 - 500.0 20 AlInGaP Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMG-A100-J02J1 4.0 18.0 - 20 GaP HSMG-A100-K72J2 8.0 - 20.0 10 GaP HSME-A100-M02J1 16.0 70.0 - 20 AlInGaP HSME-A100-N82J1 30.0 - 100.0 20 AlInGaP Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMG-A100-H01J1 2.5 8.0 - 20 GaP HSMG-A100-G31J2 1.6 - 4.0 10 GaP HSMG-A100-H41J2 2.5 - 8.0 10 GaP HSME-A100-L01J1 10.0 40.0 - 20 AlInGaP HSME-A100-M3PJ1 16.0 - 40.0 20 AlInGaP Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMM-A101-R00J1 100.0 200.0 - 20 InGaN HSMM-A100-S00J1 160.0 350.0 - 20 InGaN HSMM-A100-S8PJ1 200.0 - 620.0 20 InGaN HSMM-A101-Q7PJ1 80.0 - 200.0 20 InGaN HSMM-A101-R7PJ1 125.0 - 315.0 20 InGaN HSMM-A101-R8PJ1 125.0 - 395.0 20 InGaN Yellow Green Emerald Green Green 4 Device Selection Guide, continued Cyan Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMK-A101-R00J1 100.0 170.0 - 20 InGaN HSMK-A100-S00J1 160.0 280.0 - 20 InGaN HSMK-A100-S8WJ1 200.0 - 620.0 20 InGaN HSMK-A101-Q3WJ1 63.0 - 155.0 20 InGaN HSMK-A101-R4WJ1 100.0 - 315.0 20 InGaN Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMB-A100-J00J1 4.0 15.0 - 20 GaN HSMB-A100-J70J2 5.0 - 12.5 10 GaN HSMN-A101-N00J1 25.0 50.0 - 20 InGaN HSMN-A100-P00J1 40.0 70.0 - 20 InGaN HSMB-A100-K80J2 8.0 - 25.0 10 InGaN HSMN-A100-P8YJ1 50.0 - 155.0 20 InGaN HSMN-A101-N7YJ1 30.0 - 80.0 20 InGaN HSMN-A101-N8YJ1 30.0 - 100.0 20 InGaN Blue Note: 1. The luminous intensity, I v, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 5 Part Numbering System HSM x 1 - A x2 x 3 x 4 - x 5x 6 x 7 x 8x 9 Packaging Option Color Bin Selection Intensity Bin Select Device Specific Configuration Package Type LED Chip Color Absolute Maximum Ratings (TA = 25C) Parameters HSMS/D/G/Y DC Forward Current[1] 30 mA [2] Peak Forward Current 100 mA Power Dissipation 63 mW Reverse Voltage Junction Temperature Operating Temperature Storage Temperature HSMH 30 mA 100 mA 60 mW HSMC/J/L/A HSME 30 mA[3,4] 20 mA[3,4] 100 mA 100 mA 63 mW 48 mW 5V 110C -55C to +100C -55C to +100C Notes: 1. Derate linearly as shown in Figure 4. 2. Duty factor = 10%, Frequency = 1 kHz. 3. Drive current between 10 mA and 30 mA is recommended for best long term performance. 4. Operation at current below 5 mA is not recommended. 6 HSMV/U/Z 30 mA[3,4] 100 mA 72 mW HSMB/N/K/M 30 mA 100 mA 114 mW Optical Characteristics at TA = 25C Color Red Part Number HSMS-A100 HSMH-A100 HSMC-A10x HSMZ-A100 Red Orange HSMJ-A10x HSMV-A100 Orange HSMD-A100 HSML-A10x Amber HSMY-A100 HSMA-A10x HSMU-A100 Yellow Green HSMG-A100 HSME-A100 Emerald Green HSMG-A100 HSME-A100 Green HSMM-A10x Cyan HSMK-A10x Blue HSMB-A100 HSMN-A10x Peak Wavelength Dice peak (nm) Technology Typ. GaP 635 AlGaAs 645 AlInGaP 635 AlInGaP 639 AlInGaP 621 AlInGaP 623 GaP 600 AlInGaP 609 GaP 583 AlInGaP 592 AlInGaP 594 GaP 565 AlInGaP 575 GaP 558 AlInGaP 566 InGaN 523 InGaN 502 GaN 428 InGaN 468 Dominant Wavelength D (nm) Typ. 626 637 626 630 615 617 602 605 585 590 592 569 576 560 567 525 505 462 470 Viewing Angle 2 1/2 (Degrees) Typ. 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 Luminous Efficacy v[5] (lm/w) Typ. 120 63 150 155 240 263 380 320 520 480 500 590 560 650 610 500 300 65 75 Luminous Intensity/ Total Flux Iv(mcd)/v(mlm) Typ. 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 Notes: 1. The dominant wavelength, D, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. Radiant intensity, I e in watts/steradian, may be calculated from the equation Ie = Iv/v, where Iv is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt. Electrical Characteristics at TA = 25C Part Number HSMS/D/G/Y HSMH HSMC/J/L/A/E HSMU/V/Z HSMB HSMN/K/M 7 Forward Voltage VF (Volts) @ IF = 20 mA Typ. Max. 2.2 2.6 1.9 2.6 1.9 2.4 2.2 2.6 3.9 4.3 3.4 4.05 Reverse Voltage VR @ 100 A Min. 5 5 5 5 -- -- Reverse Voltage VR @ 10 A Min. -- -- -- -- 5 5 Thermal Resistance RJP (C/W) 180 180 280 280 280 280 1.0 RELATIVE INTENSITY 0.9 BLUE EMERALD GREEN CYAN YELLOW GREEN 0.8 GREEN 0.7 AMBER 0.6 0.5 ORANGE 0.4 RED ORANGE 0.3 RED 0.2 0.1 0 380 430 480 580 530 680 630 730 780 WAVELENGTH - nm 35 GaP EMERALD GREEN 0.8 GaP YELLOW GREEN 0.6 FORWARD CURRENT - mA RELATIVE INTENSITY 1.0 GaP YELLOW GaP ORANGE GaN BLUE 0.4 GaP RED 0.2 0 30 20 HSMH 15 480 430 580 530 680 630 730 HSMC/J/L/A/E HSMN/K/N 10 HSMB 5 0 380 HSMS/D/G/Y HSMU/V/Z 25 780 1 0 Figure 1. Relative intensity vs. wavelength. InGaN GaN 1.0 0.8 0.6 HSMS/D/G/ Y/U/V/Z 25 HSMH HSMC/J/L/A/E 20 HSMN/K/N/B 15 10 0.4 5 0.2 0 0 5 10 15 20 25 30 DC FORWARD CURRENT - mA Figure 3. Relative intensity vs. forward current. 8 DOMINANT WAVELENGTH - nm 30 CURRENT - mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) Gap AlInGaP AlGaAs 1.2 5 540 35 1.4 4 3 Figure 2. Forward current vs. forward voltage. 1.8 1.6 2 FORWARD VOLTAGE - V WAVELENGTH - nm 35 0 0 20 40 60 80 100 TEMPERATURE - C Figure 4. Maximum forward current vs. ambient temperature. Derated based on T JMAX = 110C, R JA = 500/W. 120 530 GREEN 520 510 CYAN 500 490 480 BLUE 470 460 0 5 10 15 20 25 30 35 CURRENT - mA Figure 5. Dominant wavelength vs. forward current - InGaN devices. 1.0 0.4 NORMALIZED INTENSITY DELTA VF (NORMALIZED AT 25C) 0.5 0.3 0.2 0.1 0 GaP/AlGaAs/ AlInGaP -0.1 0.8 0.6 0.4 0.2 -0.2 -0.3 -100 InGaN/GaN -50 50 0 100 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 150 0 10 20 30 40 50 60 70 80 90 ANGULAR DISPLACEMENT - DEGREES TEMPERATURE - C Figure 6. Forward voltage shift vs. temperature. Figure 7. Radiation Pattern. 4.50 TEMPERATURE 20 SEC. MAX. 1.50 240C MAX. 3C/SEC. MAX. 100-150C 183C -6C/SEC. MAX. 3C/SEC. MAX. 2.60 120 SEC. MAX. 60-150 SEC. TIME Figure 8. Recommended reflow soldering profile. TEMPERATURE 10-40 SEC. 240-245C PRE-HEAT 120-180C ABOVE 183C 6C/SEC. MAX. 2-3C/SEC. TIME Figure 8a. Recommended wave soldering profile. 9 SOLDER RESIST Figure 9. Recommended soldering pad pattern. TRAILER COMPONENT LEADER 480 mm MIN. FOR 180 REEL. 960 mm MIN. FOR 330 REEL. 200 mm MIN. FOR 180 REEL. 200 mm MIN. FOR 330 REEL. C A USER FEED DIRECTION Figure 10. Tape leader and trailer dimension. 4 0.1 4 0.1 2 0.05 2.29 0.1 1.75 0.1 +0.1 1.5 -0 C 3.5 0.05 +0.3 8 -0.1 3.81 0.1 A 3.05 0.1 +0.1 1 -0 8 0.229 0.01 Figure 11. Tape dimension. 10 2 +0.5 -0 O 20.5 0.3 62.5 180 +0 -2.5 O 13 0.2 8.4 +1.50 (MEASURED AT OUTER EDGE) -0.00 14.4 (MAX. MEASURED AT HUB) LABEL AREA (111 mm x 57 mm) WITH DEPRESSION (0.25 mm) 7.9 (MIN.) 10.9 (MAX.) Figure 12. Reel dimension. USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 13. Reeling orientation. 11 Baking is required under the following conditions: a) the humidity indicator turns pink b) the pack has been opened for more than four weeks. Baking recommended condition: 60 5C for 20 hours. This product is qualified as Moisture Sensitive JEDEC Level 2A. Intensity Bin Select (X5X6) Individual reel will contain parts from one half bin only. Color Bin Select (X 7) Individual reel will contain parts from one full bin only. X5 X7 0 Z Y W V U T S Q P N M L K 1 2 3 4 5 6 X6 0 3 4 5 7 8 9 Min Iv Bin Full Distribution 3 half bins starting from X51 4 half bins starting from X51 5 half bins starting from X51 3 half bins starting from X52 4 half bins starting from X52 5 half bins starting from X52 Intensity Bin Limits Bin ID G1 G2 H1 H2 J1 J2 K1 K2 L1 L2 M1 M2 N1 N2 P1 P2 Q1 Q2 R1 R2 S1 S2 T1 T2 U1 U2 V1 V2 Min. (mcd) 1.80 2.24 2.80 3.55 4.50 5.60 7.20 9.00 11.20 14.00 18.00 22.40 28.50 35.50 45.00 56.00 71.50 90.00 112.50 140.00 180.00 224.00 285.00 355.00 450.00 560.00 715.00 900.00 Max. (mcd) 2.24 2.80 3.55 4.50 5.60 7.20 9.00 11.20 14.00 18.00 22.40 28.50 35.50 45.00 56.00 71.50 90.00 112.50 140.00 180.00 224.00 285.00 355.00 450.00 560.00 715.00 900.00 1125.00 Tolerance of each bin limit = 12%. 12 Full Distribution A and B only B and C only C and D only D and E only E and F only F and G only G and H only A, B, and C only B, C, and D only C, D, and E only D, E, and F only E, F, and G only F, G, and H only A, B, C, and D only E, F, G, and H only B, C, D, and E only C, D, E, and F only A, B, C, D, and E only B, C, D, E, and F only Color Bin Limits Blue A B C D Green A B C D Min. (nm) 460.0 465.0 470.0 475.0 Min. (nm) 515.0 520.0 525.0 530.0 Max. (nm) 465.0 470.0 475.0 480.0 Max. (nm) 520.0 525.0 530.0 535.0 Color Bin Limits Emerald Green A B C D Min. (nm) 552.5 555.5 558.5 561.5 Max. (nm) 555.5 558.5 561.5 564.5 Yellow Green E F G H Min. (nm) 564.5 567.5 570.5 573.5 Max. (nm) 567.5 570.5 573.5 576.5 Amber A B C D E F Min. (nm) 582.0 584.5 587.0 589.5 592.0 594.5 Max. (nm) 584.5 587.0 589.5 592.0 594.5 597.0 Orange A B C D E Min. (nm) 597.0 600.0 603.0 606.0 609.0 Max. (nm) 600.0 603.0 606.0 609.0 612.0 Red Orange Min. (nm) A 611.0 B 616.0 Max. (nm) 616.0 620.0 Red Min. (nm) Full Distribution Max. (nm) Tolerance of each bin limit = 1 nm. Cyan A B C D Min. (nm) 490.0 495.0 500.0 505.0 Max. (nm) 495.0 500.0 505.0 510.0 Option Test Current Package Type Reel Size J1 20 mA Top Mount 7 inch J4 20 mA Top Mount 13 inch H1 20 mA Reverse Mount 7 inch H4 20 mA Reverse Mount 13 inch J2 10 mA Top Mount 7 inch J5 10 mA Top Mount 13 inch H2 10 mA Reverse Mount 7 inch H5 10 mA Reverse Mount 13 inch www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright (c) 2003 Agilent Technologies, Inc. Obsoletes 5988-9364EN May 13, 2003 5988-9582EN