FEATURES DESCRIPTION APPLICATIONS
• Visible light response
• Sintered construction
• Low cost
SYMBOL PARAMETER MIN MAX UNITS
Vpk Applied Voltage 350 V
Pd Δpo/Δt Continuous Power Dissipation 400 mW/°C
TO Operating and Storage Temperature -30 +75 °C
TS Soldering Temperature* +260 °C
SYMBOL CHARACTERISTIC TEST CONDITIONS MIN TYP MAX UNITS
RD Dark Resistan ce After 10 sec. @ 10 Lux @ 2856 °K 1 MW
RI Illuminated Resistance 10 Lux @ 2856 °K 12 58 KW
S Sensitivity LOG(R100)-LOG(R10)**
LOG(E100)-LOG(E10)*** 0.7 W/Lux
lrange Spectral Application Range Flooded 400 700 nm
lpeak Spectral Application Range Flooded 520 nm
tr Rise Time 10 Lux @ 2856 °K 55 ms
Tf Fall Time After 10 Lux @ 2856 °K 25 ms
CdS Photoconductive Photocells
PD
V
-P5003
PACKAGE DIMENSIONS INCH
[
mm
]
The PDV-P5003 are (CdS), Photoconductive
photocells designed to sen se light from 400 to 700
nm. These light dependent resistors are available in
a wide range of resistance values. They’re packaged
in a two leaded plastic-coated ceramic header.
• Camera exposure
• Shutter controls
• Night light Controls
* 0.200 inch from base for 3 seconds with heat sink.
ELECTRO
-
OPTICAL CHARACTERISTICS RATING
(TA)
=
2
3
°
C UNLESS OTHERWISE NOTED
**R100, R10: cell resistances at 100 Lux and 10 Lux at 2856 °K respectively .
***E100, E10: luminances at 100 Lux and 10 Lux 2856 °K respectively.
Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are
subject to change without notice.
REV 3/30/06
ABSOLUTE MAXIMUM RATING
(TA)
=
2
3
°
C UNLESS OTHERWISE NOTED
PACKAGE DIMENSIONS INCH [mm]
CERAMIC PACKAGE
Ø.433 [11.00]
±.010 [0.25]
.36 6 [9 .3 0 ]
±.010 [0.25]
PLASTIC
COATED
.07 9 [2 .0 0 ]
+.015 [0.38]
-.010 [0.25] EPOXY ON LEADS 3 mm MAX
.300 [7.62]
2X 1.437 [36.5]
2X Ø.016 [0.40]
