7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER 6 5 4 3 2 20 SET UP GAUGE 2119599-2 ALL RIGHTS RESERVED. PART NUMBER REVISION DESCRIPTION APPLICATOR STYLE CONVERSION CHART FEED TYPE CONVERT TO 2150253 -2 B FINE CRIMP HEIGHT ADJUST PNEUMATIC 2150253 -5 B FINE CRIMP HEIGHT ADJUST SERVO LATCH PLATE 2150253 -6 B NON-CRIMP HEIGHT ADJUST 2150253 -7 B FINE CRIMP HEIGHT ADJUST 7- 2150253 -7 A 4 SERVO LATCH PLATE NONE CRIMP TOOLING KIT - 10 4 1901697-2 8- 2150253 -5 - - PNEUMATIC FEED 2119950-1 2119792-1 - 2119641-1 - 2063440-1 - - - - - - - - - - - - - - - 2161326-1 - - - - 8- 2150253 -4 - - - - - - - 2168400-7 CRIMP WIRE INSUL SIZE APPL INSTRUCTIONS 408-10390 1 TE CRIMP SPECIFICATION RECPT,ULTRA-FAST FLAG, .250 SERIES TERMINAL NAME: WIRE STRIP LENGTH n 7.51-8.33 mm [.296-.328 IN] C TERMINAL APPLICATION SPECIFICATION 114-2123 - TERMINALS APPLIED TE TERMINAL 3-520132-2 WIRE SIZE 14 16 - C1__DWG_PN_2_0 TE TERMINAL C1__DWG_PN_2_1 W1__DWG_WGAUGE_2 1.90+/-0.05 [.075+/-.002] 1.78+/-0.05 [.070+/-.002] 1 RECOMMENDED SPARE PARTS 2 GREASE BEARING SURFACES LIGHTLY TE TERMINAL C1__DWG_PN_3_0 3-521127-2 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 - 9 9-520132-2 C1__DWG_PN_1_1 - TE TERMINAL C1__DWG_PN_1_0 INSULATION DIAMETER RANGE 4.70mm MAX [.185 MAX] C1__DWG_PN_4_0 C1__DWG_PN_3_1 CRIMP HEIGHT REFERENCE SETTING 8 6.7 W1__DWG_CRIMP_HT_1 8.0 W1__DWG_CRIMP_HT_2 11 W1__FA_SETTING_1 W1__FA_SETTING_2 B 4 APPLICATOR SPECIFIC DATA TO BE ENTERED INTO BLANK MEMORY CHIP AT ASSEMBLY. SEE BELOW FOR PART NUMBER: PNEUMATIC FEED WITH "SMART APPLICATOR" CONVERSION: 8SERVO FEED WITH "FINE CRIMP HEIGHT ADJUST": 8SERVO FEED WITH "NON-CRIMP HEIGHT ADJUST": 8- 12 .19 in [4.83mm] .19 in [4.83mm] 3. LUBRICATE DAILY PER THE APPLICATOR INSTRUCTION SHEET SUPPLIED WITH THE APPLICATOR. 2150253 -4 2150253 -5 2150253 -6 *WARNING ON INSTALLATION, SET WIRE DISC, ITEM 40 TO LARGEST WIRE SIZE SETTING. USE OF SETTINGS BELOW MINIMUM REQUIRED CRIMP HEIGHT SETTING WILL CAUSE DAMAGE TO CRIMP TOOLING. 12 5. ADJUSTMENT OF THE STRIPPER MAY BE REQUIRED WHEN MOVING THE APPLICATOR BETWEEN BENCH AND LEADMAKER APPLICATIONS. 6 7 8 GREASE THREADS, GROOVE AND O-RING ON ITEMS 35 CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED. 10 WHEN ASSEMBLING -6 NON-CRIMP HEIGHT ADJUST APPLICATOR USE SHIM PACK 2119957-2 TO ALIGN APPLICATOR'S MAXIMUM WIRE CRIMP HEIGHT AT NORMAL TERMINATOR SHUT HEIGHT 11 & 252. MAGNET, ITEM 166 MUST BE ORIENTED CORRECTLY IN ORDER TO PROPERLY ACTUATE THE COUNTER. 9 1 TO CHECK CRIMP HEIGHT. CRIMP SOLDER ( n .19 IN [4.83mm] 60/40 SOLID CORE) AND MEASURE AT CENTER OF SLUG. 1 A - 1 1 1 1 - - 1 - - 1 - 1 1 - - - - 1 - - - - 1 - - - - 1 - 1 - 1 1 - 1 - 1 1 - - 1 - - - 2 2 - - - - 1 - - 1 1 - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - - 1 1 - - 1 1 - - - - 2 - 1 1 1 1 - REF REF REF REF - - - - 1 - 1 1 1 1 - - - - 1 - - REF REF - - 1 1 - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - 1 - - 1 - 2 2 2 2 - 1 - 1 1 - 3 - 3 3 - 3 3 3 3 - 4 4 4 4 - 2 2 2 2 - 2 2 2 2 - 2 2 2 2 - - - - 1 - - - - 1 - 1 1 1 1 - 1 - 1 1 - 1 1 1 1 - 1 - 1 1 - 1 - 1 1 - 1 1 1 1 - 1 1 1 1 - 2 2 2 2 - 1 - 1 1 - 8 8 8 8 - 2 2 2 2 - 2 2 2 2 - 1 1 1 1 - 2 2 2 2 - 1 1 1 1 - 2 2 2 2 - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - 4 4 4 4 - 1 1 1 1 1 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 1 1 1 1 1 -77 -7 -6 -5 -2 1 - APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEM 62. FOR -6 ONLY APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEM 37. AMP 4805 REV 31MAR2000 DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 DWN APVD RELEASED 11OCT2012 LG MC A1 ECR-13-012598 08AUG2013 XZ TE B ECR-14-003864 14MAR2014 YY UG 1 - - - 1 1 - - - - 1 1 1 - - - 1 REF - 1 - - - 1 1 1 1 1 2 1 3 3 4 2 2 2 - 2 1 1 1 1 1 1 1 2 1 8 2 2 1 2 1 2 1 1 1 4 1 1 1 1 1 1 2119644-8 2119957-2 8-21084-0 2119640-1 2079988-1 2119641-1 2119798-1 1-22279-3 2119759-1 2168400-7 2063440-1 2119740-2 467281-1 2161936-1 467500-1 1976043-1 1901697-2 21045-3 994969-1 994970-2 240638-1 2161937-1 3-23627-7 SEE NOTE 4 1633743-1 455888-5 2119956-2 3-18032-3 2-18032-2 2119740-1 2168078-1 2119793-1 992763-5 2079383-4 2168400-1 2168083-2 5018030-1 986965-8 2161952-1 18023-9 1-2119655-5 2119369-1 2079383-7 2119645-1 2119957-1 2119644-5 2119085-1 5-22278-1 2119092-1 1-18028-2 2079383-4 1-2168083-0 240639-1 1-2168083-6 2161941-1 2-22281-3 2161948-1 683736-1 683737-1 1-2079383-1 4-22280-7 2161935-2 2161957-1 238009-1 2161331-1 467342-2 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 3 3 4 2 2 2 1 1 1 1 1 1 1 1 1 2 1 8 2 2 1 2 1 2 1 1 1 4 1 1 1 1 1 1 PART NO -1 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 12 DATE - 1 TE TERMINAL TERMINAL DATA: DESCRIPTION - TYPE - LTR - D - 6.02 mm [.237] P (QUANTITY 2) D APPLICATOR DATA 66 PART NUMBERS REQUIRED 2119951-1 - A REVISIONS DIST A SERVO LATCH PLATE SMART APPLICATOR LOC 1 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 10MAY2012 CHK 11MAY2012 APVD 11MAY2012 HOFFNER T.ELBIN T.ELBIN TE Connectivity Harrisburg, PA 17105-3608 NAME - APPLICATION SPEC - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 ITEM NO DESCRIPTION PRODUCT SPEC - 261 260 252 250 249 248 247 246 245 240 238 213 207 206 205 187 183 172 166 164 163 154 137 135 133 82 71 70 69 67 66 63 62 60 57 56 54 53 51 49 46 44 41 40 39 38 37 36 35 33 31 29 27 25 24 22 20 19 18 17 13 8 5 4 2 1 RAM WASHER, PRECISION APPLICATOR SHIM PACK O-RING, .676 ID, .070 DIA. MAT. PUSH ROD, AIR FEED BUSHING, LCH5-12, MISUMI FEED CAM, AIR FEED DETENT PIN SPRING, COMPRESSION RAM, AMP STYLE, END FEED, NON-ADJUST SHCS, LOW HEAD, RoHS, M5 X 10 AIR FEED MODULE TAG,IDENTIFICATION RETAINER, SHEAR, FLOATING HOLDER, SHEAR, FLOATING SHEAR, FLOATING PIN, BALL LOCK, THREADED FEED FINGER ASSEMBLY,EF RING, RETAIN, EXTERN, 3/16 CRESCENT MAGNET, RARE EARTH HIGH ENERGY COUNTER, MAGNETIC SPRING, FEED FINGER STABILIZER PIN, RETAIN, GRVD, 3/16 X .854 MEMORY CHIP, PROGRAMMED SERVO FEED LATCH ASM SPACER, CRIMPER DOCUMENTATION PACKAGE SCR, SET, FLT POINT M3 X 20.0 SCR, SET, FLT POINT M3 X 10.0 TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 LIMITER, ADJUSTMENT BOLT SCR, SET, SOC, CONE POINT, M3 x 4.0 SCR, BHSC, RoHS (M4 X 8) SHCS, LOW HEAD, RoHS, M4 X 12 SCR, SKT HD CAP, RoHS, M4 X 8.0 NUT, HEX, REG, RoHS, M3 NUT, LOCK, HEX, TORQUE (M4) PAWL,EF,AIR SCR, SKT HD CAP M4 X 6.0 APPLICATOR BASIC ASSEMBLY, EF RAM,AMP STYLE, END FEED SCR, BHSC, RoHS (M8 X 25) DISC, NUMBERED FA WIRE ADJUSTMENT APPLICATOR SHIM PACK RAM WASHER, PRECISION FA HEAD, ATLANTIC STYLE SPRING, COMPRESSION BOLT, ADJUSTMENT WASHER, FLAT, REG M4 SCR, BHSC, RoHS (M4 X 8) SCR, SKT HD CAP, RoHS, M4 X 10 STRIPPER (MACHINING) SCR, SKT HD CAP, RoHS, M4 X 35 PLATE, GUIDE, STRIP SPRING, COMPRESSION DRAG GUIDE, STRIP, REAR FRONT STRIP GUIDE SCR, BHSC, RoHS (M6 X 12) SPRING, COMPRESSION ANVIL, RIGHT HAND DEPRESSOR,SHEAR BLOCK, FL CRIMPER SPACER SPACER, WIRE FUNNEL DEPRESSOR CRIMPER, RIGHT HAND Ocean End Feed Applicator - DRAWING NO 2150253 SCALE 1:1 RESTRICTED TO SHEET 1 OF - 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV B D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC REVISIONS DIST A ALL RIGHTS RESERVED. 1 66 P LTR - 12 DATE SEE SHEET 1 DWN APVD - - - 37 FEED TYPE 40 12 DESCRIPTION 62 261 D D 38 39 247 260 7 7 246 252 245 35 44 2 PNEUMATIC 2 238 2 250 2 249 2 82 1 1 166 63 A 56 8 137 163 2 5 172 36 70 154 51 C C 69 183 54 187 4 41 SERVO LATCH PLATE 20 2 A 164 25 22 46 33 B 67 53 213 57 66 19 B 18 SERVO FEEDER NOT INCLUDED A 33 4 133 135 183 240 REF 24 CAM POSITION 30mm STROKE 29 248 33 27 8 1 17 1 1 206 60 31 205 13 207 31 49 A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 40mm STROKE AIR FEED AMP 4805 REV 31MAR2000 DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 10MAY2012 CHK 11MAY2012 APVD 11MAY2012 HOFFNER T.ELBIN T.ELBIN TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 Ocean End Feed Applicator - DRAWING NO 2150253 SCALE 1:1 RESTRICTED TO SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION - 4 REV B 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. PACIFIC VERSION TERMINATOR INTERFACE ADAPTER 6 5 4 3 2 20 SET UP GAUGE 2119599-2 ALL RIGHTS RESERVED. PART NUMBER REVISION DESCRIPTION FEED TYPE 2- 2150253 -2 B FINE CRIMP HEIGHT ADJUST PNEUMATIC 2- 2150253 -5 B FINE CRIMP HEIGHT ADJUST SERVO LATCH PLATE 7- 2150253 -7 A CRIMP TOOLING KIT - 2- 2150253 -7 B FINE CRIMP HEIGHT ADJUST NONE APPLICATOR STYLE CONVERSION CHART CONVERT TO SERVO LATCH PLATE 4 2119951-1 1901697-2 8- 2150253 -5 2119950-1 2119792-1 - 2119641-2 - - - - 2161326-1 - - - A REVISIONS DIST 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - PART NUMBERS REQUIRED SMART APPLICATOR PNEUMATIC FEED LOC 1 - - 8- 2150253 -4 - - - - - - - 2168400-7 (QUANTITY 2) - - 2063440-1 - - - D D CRIMP WIRE INSUL APPLICATOR DATA SIZE TYPE D - 6.02 mm [.237] - APPL INSTRUCTIONS 408-10390 1 1 TE TERMINAL TERMINAL DATA: TE CRIMP SPECIFICATION RECPT,ULTRA-FAST FLAG, .250 SERIES TERMINAL NAME: WIRE STRIP LENGTH n 7.51-8.33 mm [.296-.328 IN] C TERMINAL APPLICATION SPECIFICATION 114-2123 - TERMINALS APPLIED TE TERMINAL 3-520132-2 WIRE SIZE 14 16 - C1__DWG_PN_2_0 TE TERMINAL C1__DWG_PN_2_1 W1__DWG_WGAUGE_2 1.90+/-0.05 [.075+/-.002] 1.78+/-0.05 [.070+/-.002] C1__DWG_PN_3_0 3-521127-2 TE TERMINAL C1__DWG_PN_4_0 C1__DWG_PN_3_1 CRIMP HEIGHT REFERENCE SETTING CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 - 9 9-520132-2 C1__DWG_PN_1_1 - 4.70mm MAX [.185 MAX] - TE TERMINAL C1__DWG_PN_1_0 INSULATION DIAMETER RANGE W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 6.7 8.0 8 10 W1__FA_SETTING_1 W1__FA_SETTING_2 .19 in [4.83mm] .19 in [4.83mm] 11 1 B 2 *WARNING ON INSTALLATION, SET WIRE DISC, ITEM 40 TO LARGEST WIRE SIZE SETTING. USE OF SETTINGS BELOW MINIMUM REQUIRED CRIMP HEIGHT SETTING WILL CAUSE DAMAGE TO CRIMP TOOLING. RECOMMENDED SPARE PARTS GREASE BEARING SURFACES LIGHTLY 3. LUBRICATE DAILY PER THE APPLICATOR INSTRUCTION SHEET SUPPLIED WITH THE APPLICATOR. 4 APPLICATOR SPECIFIC DATA TO BE ENTERED INTO BLANK MEMORY CHIP AT ASSEMBLY. SEE BELOW FOR PART NUMBER: PNEUMATIC FEED WITH "SMART APPLICATOR" CONVERSION: 8SERVO FEED WITH "FINE CRIMP HEIGHT ADJUST": 8- 2150253 -4 2150253 -5 5. ADJUSTMENT OF THE STRIPPER MAY BE REQUIRED WHEN MOVING THE APPLICATOR BETWEEN BENCH AND LEADMAKER APPLICATIONS. 6 7 8 9 10 GREASE THREADS, GROOVE AND O-RING ON ITEMS 139 & 153. MAGNET, ITEM 166 MUST BE ORIENTED CORRECTLY IN ORDER TO PROPERLY ACTUATE THE COUNTER. CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED. 1 TO CHECK CRIMP HEIGHT. CRIMP SOLDER ( n .19 IN [4.83mm] 60/40 SOLID CORE) AND MEASURE AT CENTER OF SLUG. 1 A - 1 1 1 - 1 1 1 - - - 1 - - - 1 - 1 1 1 - - 2 - - - 1 - - 1 - 1 1 1 - 1 1 1 - 1 1 1 - - 1 - 4 4 4 - - 1 - - - 2 - 1 1 1 - REF REF REF - - - 1 - 1 1 1 - 1 1 1 - - - 1 - 1 1 1 - 3 3 3 - 1 1 1 - 1 1 1 - 1 1 1 - - - 1 - - REF - - 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 - 1 - 2 2 2 - 1 1 1 - 3 3 3 - 4 4 4 - 2 2 2 - 2 2 2 - 2 2 2 - - - 1 - - - 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 2 2 2 - 8 8 8 - 2 2 2 - 2 2 2 - 1 1 1 - 2 2 2 - 1 1 1 - 2 2 2 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 1 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 1 1 1 1 -77 -27 -25 -22 1 1 - - 1 - - - 1 1 1 - 4 - - 1 REF - 1 1 - 1 3 1 1 1 - - - 1 1 1 1 1 2 1 3 4 2 2 2 - 2 1 1 1 1 2 8 2 2 1 2 1 2 1 1 1 1 1 1 1 1 1 2119644-8 2119782-1 2119640-1 2079988-1 1-22279-3 2168400-7 2063440-1 2119740-2 467281-1 2161936-1 467500-1 1976043-1 2079383-9 1901697-2 21045-3 994969-1 994970-2 240638-1 2161937-1 8-21084-1 2119641-2 2119798-2 2079383-8 1-2119655-6 2119651-1 2119092-2 3-23627-7 SEE NOTE 4 1633743-1 455888-5 2119956-2 3-18032-3 2-18032-2 2119740-1 2168078-1 2119793-1 992763-5 2168400-1 2168083-2 5018030-1 986965-8 2161952-1 18023-9 2079383-7 2119645-1 2119957-1 2119644-5 5-22278-1 1-18028-2 2079383-4 1-2168083-0 240639-1 1-2168083-6 2161941-1 2-22281-3 2161948-1 683736-1 683737-1 4-22280-7 2161935-2 2161957-1 238009-1 2161331-1 467342-2 1 1 1 1 1 2 1 1 1 1 1 1 4 1 2 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 2 1 3 4 2 2 2 1 1 1 1 1 1 2 8 2 2 1 2 1 2 1 1 1 1 1 1 1 1 1 PART NO -21 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 11 APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEM 62. AMP 4805 REV 31MAR2000 DIMENSIONS: PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 mm & 2 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 10MAY2012 CHK 11MAY2012 APVD 11MAY2012 HOFFNER T.ELBIN T.ELBIN TE Connectivity Harrisburg, PA 17105-3608 NAME - APPLICATION SPEC - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 ITEM NO DESCRIPTION PRODUCT SPEC - 261 251 250 249 246 240 238 213 207 206 205 187 186 183 172 166 164 163 154 153 152 145 144 141 140 139 137 135 133 82 71 70 69 67 66 63 62 57 56 54 53 51 49 41 40 39 38 36 33 31 29 27 25 24 22 20 19 18 13 8 5 4 2 1 RAM WASHER, PRECISION FINE ADJUST HEAD ASM, PACIFIC STYLE PUSH ROD, AIR FEED BUSHING, LCH5-12, MISUMI SPRING, COMPRESSION SHCS, LOW HEAD, RoHS, M5 X 10 AIR FEED MODULE TAG,IDENTIFICATION RETAINER, SHEAR, FLOATING HOLDER, SHEAR, FLOATING SHEAR, FLOATING PIN, BALL LOCK, THREADED SCR, BHSC, RoHS (M6 X 20) FEED FINGER ASSEMBLY,EF RING, RETAIN, EXTERN, 3/16 CRESCENT MAGNET, RARE EARTH HIGH ENERGY COUNTER, MAGNETIC SPRING, FEED FINGER STABILIZER O-RING, .801 ID, .070 DIA. MAT. FEED CAM, AIR FEED DETENT PIN SCR, BHSC, RoHS (M4 X 16) APPLICATOR BASIC ASSEMBLY, EF RAM, ASIAN STYLE, END FEED BOLT, ADJUSTMENT PIN, RETAIN, GRVD, 3/16 X .854 MEMORY CHIP, PROGRAMMED SERVO FEED LATCH ASM SPACER, CRIMPER DOCUMENTATION PACKAGE SCR, SET, FLT POINT M3 X 20.0 SCR, SET, FLT POINT M3 X 10.0 TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 LIMITER, ADJUSTMENT BOLT SCR, SET, SOC, CONE POINT, M3 x 4.0 SHCS, LOW HEAD, RoHS, M4 X 12 SCR, SKT HD CAP, RoHS, M4 X 8.0 NUT, HEX, REG, RoHS, M3 NUT, LOCK, HEX, TORQUE (M4) PAWL,EF,AIR SCR, SKT HD CAP M4 X 6.0 SCR, BHSC, RoHS (M8 X 25) DISC, NUMBERED FA WIRE ADJUSTMENT APPLICATOR SHIM PACK RAM WASHER, PRECISION SPRING, COMPRESSION WASHER, FLAT, REG M4 SCR, BHSC, RoHS (M4 X 8) SCR, SKT HD CAP, RoHS, M4 X 10 STRIPPER (MACHINING) SCR, SKT HD CAP, RoHS, M4 X 35 PLATE, GUIDE, STRIP SPRING, COMPRESSION DRAG GUIDE, STRIP, REAR FRONT STRIP GUIDE SPRING, COMPRESSION ANVIL, RIGHT HAND DEPRESSOR,SHEAR BLOCK, FL CRIMPER SPACER SPACER, WIRE FUNNEL DEPRESSOR CRIMPER, RIGHT HAND Ocean End Feed Applicator - DRAWING NO 2150253 SCALE 1:1 RESTRICTED TO SHEET 3 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV B C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 20 LOC REVISIONS DIST A ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 1 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 251 40 11 62 FEED TYPE 261 38 D D 39 7 7 145 153 246 139 140 82 1 2 238 5 2 250 56 1 2 63 36 PNEUMATIC 2 2 249 137 8 166 A 163 172 154 70 C C 69 183 51 54 187 20 4 41 SERVO LATCH PLATE 25 22 2 A 33 141 53 164 B 67 57 213 19 66 18 B 33 SERVO FEEDER NOT INCLUDED A 4 CAM POSITION 24 135 133 REF 240 183 30mm STROKE 152 29 49 33 27 8 1 144 1 206 144 1 205 13 207 31 186 A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. PACIFIC VERSION AIR FEED Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 DIMENSIONS: mm & 2 of 4) MATERIAL AMP 4805 REV 31MAR2000 - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 10MAY2012 CHK 11MAY2012 APVD 11MAY2012 HOFFNER T.ELBIN T.ELBIN TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 Ocean End Feed Applicator - DRAWING NO 2150253 SCALE 1:1 RESTRICTED TO SHEET 4 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV B Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 2150253-2