7
www.johansontechnology.com
These lines of multilayer capacitors have been developed for
High-Q and microwave applications.
•
The S-Series (R03S, R07S, R14S, R15S) capacitors give an
ultra-high Q performance, and exhibit NP0 temperature char-
acteristics.
•
The L-Series (R05L) capacitors give mid-high Q performance,
and exhibit NP0 temperature characteristics.
•
The E-Series (S42E, S48E, S58E) capacitors give excellent
high-Q performance from HF to Microwave frequencies.
Typical uses are high voltage, high current applications. They
are offered in chip (Ni barrier or Non-Magnetic Pt.-Ag) or in
Non-Magnetic leaded form.
•
The W-Series (R05W) capacitors offer a large capacitance
value in an ultra-small 0201 package size. These exhibit a X7R
temperature characteristic.
•
RoHS compliance is standard for all unleaded parts (see
termination options box).
Multi-layer HigH-Q CapaCitors
How To order
Part Number written: 252S48E470KV4E
VOLTAGE (DC)
6R3 = 6.3 V
101 = 100 V
160 = 16 V
250 = 25 V
500 = 50 V
201 = 200 V
251 = 250 V
301 = 300 V
501 = 500 V
102 = 1000 V
152 = 1500 V
202 = 2000 V
252 = 2500 V
362 = 3600 V
502 = 5000 V
722 = 7200 V
252
CASE SIZE
R03 (01005)
R05 (0201)
R07 (0402)
R14 (0603)
R15 (0805)
S42 (1111)
S48 (2525)
S58 (3838)
S48 470
TOLERANCE
A = ± 0.05 pF
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.50 pF
F = ±1 %
G = ±2%
J = ±5%
K = ± 10%
For tolerance
availability, see chart.
K
MARKING
3 = Cap Code
& Tolerance
4 = No Marking
6 = EIA Code
(Marking on
0805 and
larger only)
4
TERMINATION
Nickel Barrier
V = Ni/Sn (Green)
T = Ni/SnPb
G = Ni/Au (Green)
Non-Mag*
U = Cu/Sn (Green)
C = Cu/SnPb
Leaded (All Non-Mag)*
1 = Microstrip
2 = Axial Ribbon
3 = Axial Wire
4 = Radial Ribbon
5 = Radial Wire
V
CAPACITANCE (pF)
1st two digits are
significant; third digit
denotes number of
zeros, R = decimal.
100 = 10 pF
101 = 100 pF
PACKAGING
S = Bulk
W = Waffle Pack
01005 - 0603
Y = Paper 5” Reel
T = Paper 7” Reel
*R = Paper 13” Reel
*J = Paper 5” Reel -
Horizontally Oriented Electrodes
*N = Paper 5” Reel -
Vertically Oriented Electrodes
*L = Paper 7” Reel -
Horizontally Oriented Electrodes
*V = Paper 7” Reel -
Vertically Oriented Electrodes
0805 - 3838
Z = Embossed 5” Reel
E = Embossed 7” Reel
*U = Embossed 13” Reel
*M = Embossed 5” Reel -
Horizontally Oriented Electrodes
*Q = Embossed 5” Reel -
Vertically Oriented Electrodes
*G = Embossed 7” Reel -
Horizontally Oriented Electrodes
*P = Embossed 7” Reel -
Vertically Oriented Electrodes
Tape specifications
conform to EIA RS481
E
DIELECTRIC
S = Ultra High Q NPO
L = High Q NPO
E = Ultra High Q NPO,
High Voltage, High Power,
*T = High Temp (175C)
Ultra High Q NPO
W= X7R
E
“*” - Not available for all MLCC - Call factory for info.
8
www.johansontechnology.com
Miniature Size - Portable Electronics RF Power Applications
01005
(R03S)
0201 (R05) 0402
(R07S)
0603
(R14S)
0805
(R15S)
1111
(S42E)
2525
(S48E)
3838
(S58E)
NPO
(R05L) X7R*
(R05W)
Capacitance Voltage
pF Code
0.1 0R1
A
B
C
D
0.2 0R2 16 V 25 V 50/200 V 250 V 500V 1000V
0.3 0R3 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
0.4 0R4 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
0.5 0R5 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V
0.6 0R6 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
0.7 0R7 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
0.8 0R8 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
0.9 0R9 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
1.0 1R0 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
1.1 1R1 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
1.2 1R2 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
1.3 1R3 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
1.4 1R4 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
1.5 1R5 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
1.6 1R6 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
1.7 1R7 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
1.8 1R8 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
1.9 1R9 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
2.0 2R0 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
2.1 2R1 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
2.2 2R2 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
2.4 2R4 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
2.7 2R7 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
3.0 3R0 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
3.3 3R3 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
3.6 3R6 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
3.9 3R9 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
4.3 4R3 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
4.7 4R7 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
5.1 5R1 A**
B
C
D
16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
5.6 5R6 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
6.2 6R2 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
6.8 6R8 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
7.5 7R5 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
8.2 8R2 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
9.1 9R1 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
10 100
F
G
J
K
16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
11 110 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
12 120 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
13 130 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
15 150 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
16 160 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
18 180 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
20 200 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
22 220 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
24 240 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
27 270 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
30 300 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
33 330 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
low eSR / HigH-Q CapaCiToR SeleCTion CHaRT
EIA Size
Cap. Value
* The R05W parts, which are X7R, can only be provided with “K” or “M” tolerance. Consult factory for Non-Standard values.
**A tolerance only available for R07S (0402) and R14S(0603) caps
9
www.johansontechnology.com
Miniature Size - Portable Electronics RF Power Applications
01005
(R03S)
0201 (R05) 0402
(R07S)
0603
(R14S)
0805
(R15S)
1111
(S42E)
2525
(S48E)
3838
(S58E)
NPO
(R05L) X7R*
(R05W)
Capacitance Toler-
ance Voltage
pF Code
36 360
F
G
J
K
25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
39 390 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
43 430 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
47 470 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
51 510 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
56 560 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
62 620 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
68 680 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
75 750 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
82 820 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
91 910 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
100 101 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
110 111 16 V 250 V 300V 500V 2500V 3600V 7200V
120 121 250 V 300V 500V 2500V 3600V 7200V
130 131 250 V 300V 500V 2500V 3600V 7200V
150 151 250 V 300V 500V 2500V 3600V 7200V
160 161 250 V 300V 500V 2500V 3600V 7200V
180 181 250 V 300V 500V 2500V 3600V 7200V
200 201 250 V 300V 500V 2500V 3600V
220 221 16 V 250 V 200V 500V 2500V 3600V
240 241 200V 500V 2500V 3600V
270 271 200V 500V 2500V 3600V
300 301 200V 500V 1500V 2500V
330 331 200V 500V 1500V 2500V
360 361 200V 500V 1500V 2500V
390 391 200V 500V 1500V 2500V
430 431
G
J
K
200V 500V 1500V 2500V
470 471 16 V 200V 500V 1500V 2500V
510 511 100V 500V 1000V 2500V
560 561 100V 500V 1000V 2500V
620 621 100V 500V 1000V 2500V
680 681 16 V 50V 1000V 2500V
750 751 50V 1000V 2500V
820 821 16 V 50V 1000V 2500V
910 911 50V 1000V 1000V
1000 102 10 V 50V 1000V 1000V
1200 122 1000V 1000V
1500 152 500V 1000V
1800 182 500V 1000V
2200 222 10 V 300V 1000V
2700 272 300V 500V
3300 332 500V
3900 392 500V
4700 472 10 V 500V
5100 512 500V
10000 103 6.3 V
low eSR / HigH-Q CapaCiToR SeleCTion CHaRT
EIA Size
Cap. Value
* The R05W parts, which are X7R, can only be provided with “K” and “M” tolerance.
Consult factory for Non-Standard values.
10
www.johansontechnology.comwww.johansontechnology.com
meCHaniCal & environmenTal CHaraCTerisTiCs
SPECIFICATION
TEST PARAMETERS
SOLDERABILITY:
Solder coverage ≥ 90% of metalized areas Preheat chip to 120°-150°C for 60 sec., dip terminals in rosin flux
No termination degradation then dip in Sn62 solder @ 240°±5°C for 5±1 sec
RESISTANCE TO
No mechanical damage Preheat device to 80°-100°C for 60 sec.
SOLDERING HEAT:
Capacitance change: ±2.5% or 0.25pF followed by 150°-180°C for 60 sec.
Q>500 I.R. >10 G Ohms Dip in 260°±5°C solder for 10±1 sec.
Breakdown voltage: 2.5 x WVDC Measure after 24±2 hour cooling period
TERMINAL
Termination should not pull off. Linear pull force* exerted on axial leads soldered to each terminal.
ADHESION:
Ceramic should remain undamaged. *0402 ≥ 2.0lbs, 0603 ≥ 2.0lbs (min.)
PCB DEFLECTION:
No mechanical damage. Glass epoxy PCB: 0.5 mm deflection
Capacitance change: 2% or 0.5pF Max
LIFE TEST:
No mechanical damage Applied voltage: 200% rated voltage, 50 mA max.
Capacitance change: ±3.0% or 0.3 pF Temperature: 125°±3°C
Q>500 I.R. >1 G Ohms Test time: 1000+48-0 hours
Breakdown voltage: 2.5 x WVDC
THERMAL CYCLE:
No mechanical damage. 5 cycles of: 30±3 minutes @ -55°+0/-3°C,
Capacitance change: ±2.5% or 0.25pF 2-3 min. @ 25°C, 30±3 min. @ +125°+3/-0°C,
Q>2000 I.R. >10 G Ohms 2-3 min. @ 25°C
Breakdown voltage: 2.5 x WVDC Measure after 24±2 hour cooling period
HUMIDITY,
No mechanical damage. Relative humidity: 90-95%
STEADY STATE:
Capacitance change: ±5.0% or 0.50pF max. Temperature: 40°±2°C
Q>300 I.R. ≥ 1 G-Ohm Test time: 500 +12/-0 Hours
Breakdown voltage: 2.5 x WVDC Measure after 24±2 hour cooling period
HUMIDITY,
No mechanical damage. Applied voltage: 1.5 VDC, 50 mA max.
LOW VOLTAGE:
Capacitance change: ±5.0% or 0.50pF max. Relative humidity: 85±2% Temperature: 40°±2°C
Q>300 I.R. = 1 G-Ohm min. Test time: 240 +12/-0 Hours
Breakdown voltage: 2.5 x WVDC Measure after 24±2 hour cooling period
VIBRATION:
No mechanical damage.
Capacitance change: ±2.5% or 0.25pF Cycle performed for 2 hours in each of three perpendicular directions
Q>1000 I.R. ≥ 10 G-Ohm Frequency range 10Hz to 55 Hz to 10 Hz traversed
Breakdown voltage: 2.5 x WVDC in 1 minute. Harmonic motion amplitude: 1.5mm
DieleCTRiC CHaRaCTeRiSTiCS npo x7R
0 ± 30ppm /°C, -55 to 125°C
Q
>1,000 @ 1 MHz, Typical 10,000
>10 GΩ @ 25°C,WVDC;
125°C IR is 10% of 25°C rating
2.5 X WVDC Min., 25°C, 50 mA max
1MHz ±50kHz, 1.0±0.2 VRMS, 25°C
Size 01005: 0.2 - 10 pF
Size 0201: 0.2 - 100 pF
Size 0402: 0.2 - 33 pF
Size 0603: 0.2 - 100 pF
Size 0805: 0.3 - 220 pF
Size 1111: 0.2 - 1000 pF
Size 2525: 1.0 - 2700 pF
Size 3838: 1.0 - 5100 pF
± 15%, -55 to 125°C
16VDC DF
≤ 3.5% @ 1 KHz, 25°C
10VDC DF
≤ 5.0% @ 1 KHz, 25°C
>500 ΩF* or 10 GΩ* @ 25°C,WVDC;
125°C IR is 10% of 25°C rating
* whichever is less
2.5 X WVDC Min., 25°C, 50 mA max
1KHz ±50Hz, 1.0±0.2 VRMS, 25°C
100 - 10,000 pF
TEMPERATURE COEFFICIENT:
QUALITY FACTOR / DF:
INSULATION RESISTANCE:
DIELECTRIC STRENGTH:
TEST PARAMETERS:
AVAILABLE CAPACITANCE:
11
www.johansontechnology.com
www.johansontechnology.com
Size Units Length Width Thickness End Band
01005 In
.016 ±.001 .008 ±.001 .008 ±.001 .006 Max.
(0402) mm
(0.40 ±0.03) (0.20 ±0.03) (0.20 ±0.03) (0.15 Max.)
0201 In
.024 ±.001 .012 ±.001 .012 ±.001 .008 Max.
(0603) mm
(0.60 ±0.03) (0.30 ±0.03) (0.30 ±0.03) (0.20 Max.)
0402 In
.040 ±.004 .020 ±.004 .020 ±.004 .010 ±.006
(1005) mm
(1.02 ±0.1) (0.51 ±0.1) (0.51 ±0.1) (0.25 ±.15)
0603 In
.062 ±.006 .032 ±.006 .030 +.005/-.003 .014 ±.006
(1608) mm
(1.57 ±0.15) (0.81 ±0.15) (0.76 +.13-.08) (0.35 ±.15)
0805 In
.080 ±.008 .050 ±.008 .040 ±.006 .020 ±.010
(2012) mm
(2.03 ±0.20) (1.27 ±0.20) (1.02 ±.15) (0.50 ±.25)
meCHaniCal CHaraCTerisTiCs
Horizontal Electrode Orientation
Vertical Electrode Orientation
12
www.johansontechnology.com
Lead Size Units L Tol W Tol T (max) E/B (typ) LL(min) X Tol eTo l
1
S42E In 0.135 +/- .015 0.110 +/- .020 0.120 0.015 0.25 0.093 +/-0.005 0.004 +/- 0.001
mm 3.43 +/- 0.38 2.79 +/- 0.51 3.05 0.38 6.35 2.36 +/- 0.13 0.102 +/- 0.025
S48E In 0.245 +/- 0.025 0.250 +/- 0.015 0.160 0.025 0.50 0.240 +/- 0.005 0.004 +/- 0.001
mm 6.22 +/- 0.64 6.35 +/-0.38 3.81 0.63 12.7 6.10 +/- 0.13 0.102 +/- 0.025
S58E In 0.38 +0.035 / - 0.010 0.38 +/- 0.010 0.170 0.04 MAX. 0.750 0.35 +/- 0.010 0.010 +/- 0.005
mm 9.65 +0.89 / -0.25 9.65 +/- 0.25 4.32 1.02 MAX. 19.05 8.89 +/- 0.25 0.25 +/- 0.13
2
S42E In 0.135 +/- .015 0.110 +/- .020 0.102 0.015 0.25 0.093 +/-0.005 0.004 +/- 0.001
mm 3.43 +/- 0.38 2.79 +/- 0.51 2.59 0.38 6.35 2.36 +/- 0.13 0.102 +/- 0.025
S48E In 0.245 +/- 0.025 0.250 +/- 0.015 0.160 0.025 0.50 0.240 +/- 0.005 0.004 +/- 0.001
mm 6.22 +/- 0.64 6.35 +/-0.38 3.81 0.63 12.7 6.10 +/- 0.13 0.102 +/- 0.025
S58E In 0.38 +0.035 / - 0.010 0.38 +/- 0.010 0.170 0.04 MAX. 0.750 0.35 +/- 0.010 0.010 +/- 0.005
mm 9.65 +0.89 / -0.25 9.65 +/- 0.25 4.32 1.02 MAX. 19.05 8.89 +/- 0.25 0.25 +/- 0.13
3S42E S48E
S58E
In 0.145 +/- .020 0.110 +/- .015 0.102 0.50 #26 AWG, .016 (.406) dia. nominal
mm 3.68 +/- 0.51 2.79 +/- 0.38 2.59 12.70
4S42E S48E
S58E
In 0.135 +/- .015 0.110 +/- .015 0.102 0.25 0.093 +/-0.005 0.004 +/- 0.001
mm 3.43 +/- 0.38 2.79 +/- 0.38 2.59 6.35 2.36 +/- 0.13 0.102 +/- 0.025
5S42E S48E
S58E
In 0.145 +/- .020 0.110 +/- .015 0.102 0.50 #26 AWG, .016 (.406) dia. nominal
mm 3.68 +/- 0.51 2.79 +/- 0.38 2.59 12.70
Termination Size Units L Tol W To l T E / B Tol
V, T
U,C
S42E In 0.110 +.020 -.010 0.110 +/- .015 0.102 Max. 0.015 Typ. +/- 0.008
mm 2.79 +0.51 -0.25 2.79 +/- 0.38 2.59 Max. 0.38 Typ. +/- 0.20
S48E In 0.230 +.025 -.010 0.250 +/- .015 0.150 Max. 0.025 Typ.
mm 5.84 +0.63 -0.25 6.35 +/- 0.38 3.81 Max. 0.63 Typ.
S58E In 0.380 +.015 -.010 0.380 +/- .010 0.170 Max. 0.025 Typ.
mm 9.65 +0.38 -0.25 9.65 +/- 0.25 4.32 Max. 0.63 Typ.
For all E-Series Models:
OPERATING TEMP. :
-55 to +125°C
INSULATION RESISTANCE:
>1000 ΩF or >10 GΩ,
whichever is less
@ 25°C WVDC
TEMPERATURE COEFFICIENT:
0 ± 30ppm /°C, -55 to 125°C
DISSIPATION FACTOR (TYP.):
< 0.05% @ 1 MHz
e-SeRieS TeRminaTionS anD leaDS
Unleaded Termination Codes “V” (Ni/Sn),
“T” (Ni/SnPb), “U” (Cu/Sn non-mag), “C”
(Cu/SnPb non-mag)
Microstrip Ribbon Leads (Non-Magnetic),
Termination Code “1”
Axial Ribbon Leads (Non-Magnetic), Ter-
mination Code “2”
Axial Wire Leads (Non-Magnetic),
Termination Code “3”
Radial Ribbon Leads (Non-Magnetic),
Termination Code “4”
Radial Wire Leads (Non-Magnetic),
Termination Code “5”
L
E/B
T
W
L
e
T
W
LLLL
X
L
e
T
W
LLLL
X
T
L
LL
W
T
L
LL
e
x
LL
x
W
W
T
L
LL
13
www.johansontechnology.com
0.5
1.0
10.0
25.0
Frequency (GHz)
Capacitance (pF)
0.1 110 100 200
R05/0201
R07/0402
R14/0603
R15/0805
Typical Series Resonant Frequency (Series Mounted)
0.01
0.1
1
0 500 1000 1500 2000 2500
ESR (Ohms)
Frequency (MHz)
0.5 pF
1.2 pF
3.3 pF
5.6 pF
8.2 pF
22 pF
ESR vs Frequency: 0201/R05L
1
10
100
1000
10000
0 500 1000 1500 2000 2500
Q
Frequency (MHz)
0.5 pF
1.2 pF
3.3 pF
5.6 pF
8.2 pF
22 pF
Q vs Frequency: 0201/R05L
0.01
0.1
1
0.5 11050
ESR (Ohms)
Capacitance (pF)
150-250MHz
900-1000MHz
1900-2000MHz
2100-2250MHz
ESR vs Capacitance: 0201/R05L
10
100
1000
10000
0.5 11050
Q
Capacitance (pF)
150-250MHz
900-1000MHz
1900-2000MHz
2100-2250MHz
Q vs Capacitance: 0201/R05L
RF CHaRaCTeRiSTiCS - l-SeRieS
series resonanCe CHarT
For all E-Series Models:
OPERATING TEMP. :
-55 to +125°C
INSULATION RESISTANCE:
>1000 ΩF or >10 GΩ,
whichever is less
@ 25°C WVDC
TEMPERATURE COEFFICIENT:
0 ± 30ppm /°C, -55 to 125°C
DISSIPATION FACTOR (TYP.):
< 0.05% @ 1 MHz
14
www.johansontechnology.com
Measurements performed on a Boonton 34A Resonant Coaxial Line and represent typical capacitor performance.
H
0.01
0.1
1
0 500 1000 1500 2000 2500
ESR (Ohms)
Frequency (MHz)
3.3 pF
10 pF
15 pF
33 pF
47 pF
Equivalent Series Resistance: 0603/R14S
1
10
100
1000
10000
0 500 1000 1500 2000 2500
Q
Frequency (MHz)
3.3 pF
10 pF
15 pF
33 pF
47 pF
Q Factor: 0603/R14S
0.01
0.1
1
0 500 1000 1500 2000 2500
ESR (Ohms)
Frequency (MHz)
0.5 pF
1.2 pF
4.7 pF
8.2 pF
10 pF
15 pF
Equivalent Series Resistance: 0402/R07S
1
10
100
1000
10000
0 500 1000 1500 2000 2500
Q
Frequency (MHz)
0.5 pF
1.2 pF
4.7 pF
8.2 pF
10 pF
15 pF
Q Factor: 0402/R07S
S-SeRieS RF CHaRaCTeRiSTiCS veRSuS FReQuenCy
1
10
100
1000
10000
0 500 1000 1500 2000 2500
Q
4.7pF 15pF 47pF
100pF 220pF
Frequency (MHz)
Q Factor: 0805/R15S
0.01
0.1
1
0 500 1000 1500 2000 2500
ESR (Ohms)
4.7 pF 15 pF 47 pF 100 pF 220pF
Frequency (Mhz)
Equivalent Series Resistance: 0805/R15S
15
www.johansontechnology.com
S-SeRieS RF CHaRaCTeRiSiTCS veRSuS CapaCiTanCe
0.01
0.1
1
11050
ESR (Ohms)
Capacitance (pF)
150-250MHz
900-1000MHz
1900-2000MHz
2100-2250MHz
Equivalent Series Resistance: 0603/R14S
1
10
100
1000
10000
11050
Q
Capacitance (pF)
150-250MHz
900-1000MHz
1900-2000MHz
2100-2250MHz
Q Factor: 0603/R14S
0.01
0.1
1
0.5 11020
ESR (Ohms)
Capacitance (pF)
150-250MHz
900-1000MHz
1900-2000MHz
2100-2250MHz
Equivalent Series Resistance: 0402/R07S
1
10
100
1000
10000
0.5 11020
Q
Capacitance (pF)
150-250MHz
900-1000MHz
1900-2000MHz 2100-2250MHz
Q Factor: 0402/R07S
0.01
0.1
1
1 10 100 1000
150-250MHz 900-1000MHz 1900-2000MHz 2100-2250MHz
ESR (Ohms)
Capacitance (pF)
Equivalent Series Resistance: 0805/R15S
1
10
100
1000
10000
1 10 100 1000
150-250MHz 900-1000MHz
1900-2000MHz 2100-2250MHz
ESR (Ohms)
Capacitance (pF)
Q Factor: 0805/R15S
Measurements performed on a Boonton 34A Resonant Coaxial Line and represent typical capacitor performance.
16
www.johansontechnology.com
S42e SeRieS RF CHaRaCTeRiSTiCS veRSuS FReQuenCy
S42e SeRieS RF CHaRaCTeRiSTiCS veRSuS CapaCiTanCe
0.01
0.1
1
0 200 400 600 800 1000 1200 1400
ESR (Ohms)
1.5pF 3.9pF 9.1pF 15pF 27pF
82pF
Frequency (MHz)
Equivalent Series Resistance: 1111/S42E
S42E Equivalent Series Resistance vs Capacitance, Typical
S42E SRF (Series Mount), Typical
S42E Q vs. Capacitance, Typical
Q Factor: 1111/S42E
0.01
0.1
1
1 10 100 1000
Capacitance (pF)
ESR (Ohms)
140 - 250 MHz 350 - 750 MHz 600 - 1200 MHz
1
10
100
1000
1 10 100 1000
Q
140 - 250 MHz 350 - 750 MHz 600 - 1200 MHz
10000
Capacitance (pF)
)zHG( ycneuqerF
JTI S42E SRF
10
1
0.1
110 100 1000
Capacitance (pF)
1
10
100
1000
10000
0 200 400 600 800 1000 1200 1400
Frequency (MHz)
Q
1.5pF 3.9pF 9.1pF 15pF 27pF
82pF
17
www.johansontechnology.com
www.johansontechnology.com
JTi S48e gRapHiCal DaTa
As measured on a 8720C VNA, using a Shunt-
Through fixture, and using the S11 magnitude dip
to determine the SRF
0.1
1
10
1 1 0 100 1000
SRF (Shunt Mount), S48E, Typical (Preliminary)
Capacitance (pF)
JTI S48E SRF
Frequency (GHz)
0.1
1
10
100
1 10 100 1000 10000
Current Rating vs. Capacitance, S48E, Typical (Preliminary)
Capacitance (pF)
Current Rating (amps)
30 MHz
64 MHz
128 MHz
As measured on a 4287A LCR meter, using a
16092A fixture
As measured on a 4287A LCR meter, using a
16092A fixture
Solid traces show voltage limited current (Vrms)
Dotted traces show power dissipation limited
current (Based on 4 Watts Power Dissipation, and
125 degrees C case temp.)
0.010
0.100
1 10 100 1000 10000
S48E ESR vs. Capacitance, Typical (Preliminary)
ESR (ohms)
ESR vs. C @ 64 MHz
ESR vs. C @ 128 MHz
Capacitance (pF)
100
1000
10000
100000
1000 1 10 100 10000
Q
10
S48E Q vs. Capacitance, Typical (Preliminary)
Capacitance (pF)
Q vs C @ 64 MHz
Q vs C @ 128 MHz
