Compact Power Connectors GENERAL PRODUCT INFORMATION Positronic Industries connectpositronic.com The PCIB Series encompasses all of the features of the PCIH Series in a smaller package. Reliability, high current capacity and many system management connections make the PCIB Series ideal for use in telecom, computer, information systems and industrial applications. PCIB SERIES CONTACT VARIANTS FACE VIEW OF MALE AND REAR VIEW OF FEMALE 1 2 3 4 5 6 23 7 10 13 16 19 8 11 14 17 20 9 12 15 18 21 24 22 22 23 24 21 18 15 12 20 17 14 11 9 8 6 4 2 16 13 10 7 5 3 1 19 PCIB24W9 VARIANT PCIB VARIANT PCIB24W9R VARIANT (Inverted Termination) PCIB VARIANT (inverted) PCIB 24w9 PCIB 24w9 9 Size 16 Power Contacts and 15 Size 22 Signal Contacts 1 3 5 2 4 6 7 10 13 16 19 8 11 14 17 20 9 12 15 18 21 22 24 23 25 26 26 PCIB26W11 VARIANT PCIB VARIANT 25 23 24 22 21 18 15 12 9 6 4 2 20 17 14 19 16 13 8 7 5 3 1 PCIB26W11R VARIANT (Inverted Termination) PCIB VARIANT (inverted) 11 Size 16 Power Contacts and 15 Size 22 Signal Contacts PCIB SERIES 71 DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 11 10 Compact Power Connectors TECHNICAL CHARACTERISTICS MECHANICAL CHARACTERISTICS: Insulator: Glass-filled polyester, UL 94V-0, blue color. Contacts: Size 16 contacts: High conductivity precision-machined copper alloy. Size 22 contacts: Precision-machined copper alloy. Plating: gold flash over nickel. Other plating options available, refer to Step 7 on page 89. Mounting Screws: Steel, zinc plated. Jackscrews: Stainless steel, passivated. ELECTRICAL CHARACTERISTICS: PCIB Contact Current Ratings, per UL 1977 See Temperature Rise Curves on page 5 for details. PCIB24W9: Size 16 Power Contacts: Positions 22, 23, and 24: 45 amperes continuous, all contacts under load. Positions 1through 6: 35 amperes continuous, all contacts under load. Size 22 Signal Contacts: 3 amperes nominal rating. PCIB26W11: Size 16 Power Contacts: 34 amperes continuous, all contacts under load. Size 22 Signal Contacts: 3 amperes nominal rating. Initial Contact Resistance; maximum: Size 16 Contact: 0.0007 ohms maximum. Size 22 Contact: 0.004 ohms maximum. Per IEC 512-2, Test 2b. Removable Contacts: Install contact from rear of insulator; release from front of insulator. Size 16 and 22 female contacts feature "Closed Entry" design for highest reliability. Removable Contact Retention in Connector Body: Size 16 Contacts: Size 22 Contacts: Fixed Contacts: 45 N [10 lbs.] 27 N [6 lbs.] Resistance to Solder Heat: Safety "Recessed in Insulator" Contacts: The following size 16 contacts are recessed 5.00 mm [0.197 inch] below the face of the female connector insulator per safety requirements. Contact positions 23 and 24. None PCIB24W9: PCIB26W11: [0.126 [0.126 [0.252 [0.252 [0.098 [0.079 inch] inch] inch] inch] inch] inch] Compliant Terminations: Size 16 and 22 contacts are available with Compliant Contact Terminations. Printed Board Mounting: Mounting holes provided in connector body for printed board mounting. Self-tapping screws are available. Mechanical Operations: 250 couplings, minimum. 2.0mm [0.079 inch] CLIMATIC CHARACTERISTICS: Working Temperature: O NIC INDU S EU U.L. Recognized File #E49351 CSA Recognized File #LR54219 Di * Compliant IES RoHS TR 500 V r.m.s. 333 V r.m.s. R -55C to +125C. EC 1,000 V r.m.s. 500 V r.m.s. 333 V r.m.s. 260C [500F] for 10 seconds duration per IEC 512-6, Test 12e, 25-watt soldering iron. Sequential Contact Mating System: PCIB24W9: First mate contact 22 and last mate contact position 7. PCIB26W11: Last mate contact position 7. Consult Technical Sales for customer specified sequential mating. 1,500 V r.m.s. 1,000 V r.m.s. 3.2mm 3.2mm 6.4mm 6.4mm 2.5mm 2.0mm 67 N [15 lbs.] 27 N [6 lbs.] Printed board terminations, both straight and right angle (90). Size 16 female contacts feature "Closed Entry" design. Size 22 feature rugged "Robi-D Open Entry" contact design. "Closed Entry" contacts available, consult Technical Sales. Fixed Contact Retention in Connector Body: Size 16 Contacts: Size 22 Contacts: r * pe Working Voltage: PCIB24W9: Contacts 22, 23 and 24: Contacts 1 through 6: Contacts 7 through 21: PCIB26W11: Contacts 1 through 6 and 22 through 26: Contacts 7 through 21: Provided by connector body design. For RoHS options see page 89. 5/ Creepage and Clearance Distance; minimum: PCIB24W9: Contact 24 to Contact 22: Contact 23 to Contact 22: Contact 24 to Signal Contacts: Contact 23 to Signal Contacts: Contact 24 to Contact 23: Contact 22 to Signal Contacts: PCIB26W11: Contact 22 to Signal Contacts: 3,000 V r.m.s. 1,500 V r.m.s. 1,000 V r.m.s. Polarization: IT Voltage Proof: PCIB24W9: Contacts 22, 23 and 24: Contacts 1 through 6: Contacts 7 through 21: PCIB26W11: Contacts 1 through 6 and 22 through 26: Contacts 7 through 21: 5 G ohms per IEC 512-2, Test 3a. Male and female connector bodies provide "lead-in" for 1.3 mm [0.050 inch] diametral misalignment. POS Insulator Resistance: Blind Mating System: PCIB SERIES MATERIALS AND FINISHES: Positronic Industries connectpositronic.com rec tive 2002 /9 DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 72 Compact Power Connectors CONNECTOR OUTLINE AND MATING DIMENSIONS Positronic Industries connectpositronic.com PCIB CONNECTOR OUTLINE DIMENSIONS RIGHT ANGLE (90) BOARD MOUNT CONNECTOR MALE CONNECTOR FEMALE CONNECTOR 2X o2.54 [o0.100] 47.50 [1.870] 47.50 [1.870] 2X o2.54 [o0.100] 13.68 [0.539] 16.48 [0.649] 17.49 [0.689] 20.29 [0.799] 53.54 [2.108] 53.54 [2.108] 12.54+0.13-0.38 [0.494+0.005-0.015] 12.54+0.13-0.38 [0.494+0.005-0.015] STRAIGHT BOARD MOUNT CONNECTOR FEMALE CONNECTOR MALE CONNECTOR 56.32 [2.217] 56.32 [2.217] 6.02 [0.237] 7.04 [0.277] 18.51 [0.729] 18.71 [0.736] 2X o2.54 [o0.100] 50.50 [1.988] 50.50 [1.988] 12.54 [0.494] 2X o2.54 [o0.100] 12.54 [0.494] PCIB CONNECTOR MATING DIMENSIONS (FULLY MATED) 19.70 [0.776] REF. PCIB SERIES Right Angle (90) Board Mount Male to Straight Board Mount or Panel Mount Female 73 DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 17.47 [0.688] REF. Right Angle (90) Board Mount Male to Right Angle (90) Board Mount Female SEE PAGE 83 AND 84 FOR PANEL MOUNT CONNECTOR DIMENSIONS. Compact Power Connectors STRAIGHT SOLDER CONNECTOR, FEMALE Positronic Industries connectpositronic.com FEMALE STRAIGHT SOLDER CONNECTOR CODE 3 STANDARD PART NUMBER PCIB24W9F300A1 9X o1.14 [0.045] 15X o0.61 [0.024] 4X 2.70 [0.106] 24X 4.50 [0.177] 2X 4.20 [0.165] 1.15 [0.045] 2X Size 16 Contacts 5 mm Recessed Min. 2X 2.70 [0.106] 4.25 [0.167] 2.125 [0.0837] 10.45 [0.411] 8.85 [0.348] 13.90 [0.547] 18.95 [0.746] 2X 25.25 [0.994] CONTACT HOLE PATTERN CONNECTOR DIMENSIONS Note: See below for suggested printed board hole sizes. FEMALE STRAIGHT SOLDER CONNECTOR WITH A.C. PASS-THROUGH CODE 3 WITH MOS* -246.5 CRIMP CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY LOW PROFILE PART NUMBER PCIB24W9F300A1-246.5 * For MOS descriptions, see chart on pages 111-112. 4X 2.70 [0.106] Crimp contacts ordered separately ontacts (see pages 102-103) parately 15X o0.61 [0.024] 3X O3.30 [0.130] Min. A.C. Pass-Through Holes 1.15 [0.045] 2X 4.20 [0.165] 4.25 [0.167] 6X o1.14 [0.045] 21X 4.50 [0.177] 2.125 [0.0837] 2X 2.70 [0.106] 10.45 [0.411] 8.85 [0.348] 2X Size 16 Contacts 5mm Recessed Min. 13.90 [0.547] 18.95 [0.746] 2X 25.25 [0.994] PCIB SERIES CONTACT HOLE PATTERN CONNECTOR DIMENSIONS SUGGESTED PRINTED BOARD HOLE SIZES: Suggest O1.00 [0.039] holes for size 22 contact holes. Suggest O1.60 [0.063] holes for size 16 contact holes. Suggest O3.560.08 [0.1400.003] holes for connector mounting holes. DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 74 Compact Power Connectors STRAIGHT SOLDER CONNECTOR, FEMALE Positronic Industries connectpositronic.com FEMALE STRAIGHT SOLDER CONNECTOR CODE 3 STANDARD PART NUMBER PCIB26W11F300A1 11X o1.14 [0.045] 15X o0.61 [0.024] 1.15 [0.045] 4X 2.70 [0.106] 2X 4.20 [0.165] 4.25 [0.167] 2.125 [0.0837] 26X 4.50 [0.177] 2X 2.70 [0.106] 10.45 [0.411] 8.85 [0.348] 13.90 [0.547] 18.95 [0.746] 2X 25.25 [0.994] CONTACT HOLE PATTERN CONNECTOR DIMENSIONS Note: See below for suggested printed board hole sizes. FEMALE STRAIGHT SOLDER CONNECTOR WITH A.C. PASS-THROUGH CODE 3 WITH MOS* -246.6 CRIMP CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY LOW PROFILE PART NUMBER PCIB26W11F300A1-246.6 * For MOS descriptions, see chart on pages 111-112. 4X 2.70 [0.106] Crimp contacts ts ordered separately ly (see pages 102-103) 15X o0.61 [0.024] 5X O3.30 [0.130] Min. A.C. Pass-Through Holes 2X 4.20 [0.165] 1.15 [0.045] 4.25 [0.167] 6X o1.14 [0.045] 21X 4.50 [0.177] 2.125 [0.0837] 2X 2.70 [0.106] 10.45 [0.411] 8.85 [0.348] 13.90 [0.547] 18.95 [0.746] 2X 25.25 [0.994] PCIB SERIES CONTACT HOLE PATTERN CONNECTOR DIMENSIONS SUGGESTED PRINTED BOARD HOLE SIZES: 75 DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. Suggest O1.00 [0.039] holes for size 22 contact holes. Suggest O1.60 [0.063] holes for size 16 contact holes. Suggest O3.560.08 [0.1400.003] holes for connector mounting holes. Compact Power Connectors STRAIGHT SOLDER CONNECTOR, MALE Positronic Industries connectpositronic.com MALE STRAIGHT SOLDER CONNECTOR CODE 3 STANDARD PART NUMBER PCIB24W9M300A1 9X o1.14 [0.045] 4X 2.70 [0.106] 24X 4.50 [0.177] 15X o0.61 [0.024] 2X 4.20 [0.165] 1.15 [0.045] 2X 2.70 [0.106] First Mate Second Mate 2.125 [0.0837] 4.25 [0.167] 10.45 [0.411] 8.85 [0.348] 13.90 [0.547] 18.95 [0.746] 2X 25.25 [0.994] CONTACT HOLE PATTERN Position 7 Last to Mate Signal Note: See below for suggested printed board hole sizes. CONNECTOR DIMENSIONS MALE STRAIGHT SOLDER CONNECTOR CODE 3 STANDARD PART NUMBER PCIB26W11M300A1 11X o1.14 [0.045] 26X 4.50 [0.177] 15X o0.61 [0.024] 2X 4.20 [0.165] 4X 2.70 [0.106] 1.15 [0.045] 2X 2.70 [0.106] 2.125 [0.0837] 4.25 [0.167] 10.45 [0.411] 8.85 [0.348] 13.90 [0.547] 18.95 [0.746] 2X 25.25 [0.994] CONTACT HOLE PATTERN PCIB SERIES Position 7 Last to Mate Signal CONNECTOR DIMENSIONS SUGGESTED PRINTED BOARD HOLE SIZES: Suggest O1.14 [0.045] holes for size 22 contact holes. Suggest O2.03 [0.080] holes for size 16 contact holes. Suggest O3.560.08 [0.1400.003] holes for connector mounting holes. DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 76 Compact Power Connectors STRAIGHT SOLDER CONNECTOR, MALE Positronic Industries connectpositronic.com MALE STRAIGHT SOLDER CONNECTOR WITH JACKSCREW SYSTEM CODE 3 WITH MOS* -444.0 OTHER JACKSCREW LENGTH OPTIONS AVAILABLE, CONTACT TECHNICAL SALES FOR DETAILS STANDARD PART NUMBER PCIB26W11M300A1-444.0 * For MOS descriptions, see chart on pages 111-112. 15X O0.61 [0.024] 2X 4.20 [0.165] 11X O1.14 [0.045] 30X 4.50 [0.177] 2X 2-56UNC-2B Fixed Jackscrew Position 7 Last to Mate Signal 4X 2.70 [0.106] 2.125 [0.0837] 4.25 [0.167] 10.45 [0.411] 1.15 [0.045] 2X 2.70 [0.106] 2X O2.67 [O0.105] 8.85 [0.348] 13.90 [0.547] 18.95 [0.746] 2X 25.25 [0.994] CONTACT HOLE PATTERN CONNECTOR DIMENSIONS Note: See below for suggested printed board hole sizes. PCIB SERIES SUGGESTED PRINTED BOARD HOLE SIZES: 77 DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. Suggest O1.14 [0.045] holes for size 22 contact holes. Suggest O2.03 [0.080] holes for size 16 contact holes. Suggest O3.560.08 [0.1400.003] holes for connector mounting holes. Compact Power Connectors RIGHT ANGLE (90) BOARD MOUNT CONNECTOR, FEMALE Positronic Industries connectpositronic.com FEMALE RIGHT ANGLE (90) BOARD MOUNT CONNECTOR CODE 4 STANDARD PART NUMBER PCIB24W9F400A1 18.95 [0.746] 14.710.65 [0.5790.026] 13.90 [0.547] 8.85 [0.348] 10.45 [0.411] 2X 4.20 [0.165] 2X Size 16 Contacts 5mm Recessed Min. 7.39 [0.291] 7.96 [0.313] 12.21 [0.481] 10.09 [0.397] 12.79 [0.504] 1.15 [0.045] 4X 2.70 [0.106] 2X 23.75 [0.935] 9X o1.60 [0.063] 24X 2.68 [0.106] 15X o0.71 [0.028] CONTACT HOLE PATTERN Note: See below for suggested printed board hole sizes. CONNECTOR DIMENSIONS FEMALE RIGHT ANGLE (90) BOARD MOUNT CONNECTOR CODE 4 PART NUMBER FOR INVERTED TERMINATION PCIB24W9RF400A1 18.95 [0.746] 13.90 [0.547] 8.85 [0.348] 14.710.65 [0.5790.026] 10.45 [0.411] 2X 4.20 [0.165] 12.21 [0.481] 2X Size 16 Contacts 5mm Recessed Min. 7.96 [0.313] 12.79 [0.504] 10.09 [0.397] 7.39 [0.291] 4X 2.70 [0.106] 1.15 [0.045] 24X 2.68 [0.106] 2X 23.75 [0.935] CONTACT HOLE PATTERN PCIB SERIES 9X o1.60 [0.063] 15X o0.71 [0.028] CONNECTOR DIMENSIONS SUGGESTED PRINTED BOARD HOLE SIZES: Suggest O1.14 [0.045] holes for size 22 contact holes. Suggest O2.03 [0.080] holes for size 16 contact holes. Suggest O3.560.08 [0.1400.003] holes for connector mounting holes. DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 78 RIGHT ANGLE (90) BOARD MOUNT CONNECTOR, FEMALE Positronic Industries connectpositronic.com Compact Power Connectors FEMALE RIGHT ANGLE (90) BOARD MOUNT CONNECTOR WITH A.C. PASS-THROUGH CODE 4 WITH MOS* -422.0 CRIMP CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY LOW PROFILE PART NUMBER PCIB24W9F400A1-422.0 * For MOS descriptions, see chart on pages 111-112. Crimp contacts Contacts ordered separately (see pageseparately 102-103) 14.710.65 [0.5790.026] 10.45 [0.411] 2X 4.20 [0.165] 2X Size 16 Contacts 5mm Recessed Min. 7.39 [0.291] 7.96 [0.313] 12.21 [0.481] 1.15 [0.045] 10.09 [0.397] 12.79 [0.504] 4X 2.70 [0.106] 15X o0.71 [0.028] 2X 23.75 [0.935] 24X 2.68 [0.106] CONTACT HOLE PATTERN 6X 1.60 [0.063] CONNECTOR DIMENSIONS Note: See below for suggested printed board hole sizes. PCIB SERIES SUGGESTED PRINTED BOARD HOLE SIZES: 79 DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. Suggest O1.14 [0.045] holes for size 22 contact holes. Suggest O2.03 [0.080] holes for size 16 contact holes. Suggest O3.560.08 [0.1400.003] holes for connector mounting holes. Compact Power Connectors RIGHT ANGLE (90) BOARD MOUNT CONNECTOR, FEMALE Positronic Industries connectpositronic.com FEMALE RIGHT ANGLE (90) BOARD MOUNT CONNECTOR CODE 4 STANDARD PART NUMBER PCIB26W11F400A1 18.95 [0.746] 13.90 [0.547] 8.85 [0.348] 2X 4.20 [0.165] 10.45 [0.411] 14.710.65 [0.5790.026] 12.21 [0.481] 7.96 [0.313] 1.15 [0.045] 7.39 [0.291] 10.09 [0.397] 12.79 [0.504] 4X 2.70 [0.106] 2X 23.75 [0.935] 15X o0.71 [0.028] 26X 2.68 [0.106] CONTACT HOLE PATTERN 11X o1.60 [0.063] Note: See below for suggested printed board hole sizes. CONNECTOR DIMENSIONS FEMALE RIGHT ANGLE (90) BOARD MOUNT CONNECTOR CODE 4 PART NUMBER FOR INVERTED TERMINATION PCIB26W11RF400A1 18.95 [0.746] 13.90 [0.547] 8.85 [0.348] 2X 4.20 [0.165] 10.45 [0.411] 12.79 [0.504] 10.09 [0.397] 7.96 [0.313] 7.39 [0.291] 15X o0.71 [0.028] 26X 2.68 [0.106] 11X o1.60 [0.063] 12.21 [0.481] 4X 2.70 [0.106] 1.15 [0.045] 2X 23.75 [0.935] CONTACT HOLE PATTERN PCIB SERIES 14.710.65 [0.5790.026] CONNECTOR DIMENSIONS SUGGESTED PRINTED BOARD HOLE SIZES: Suggest O1.14 [0.045] holes for size 22 contact holes. Suggest O2.03 [0.080] holes for size 16 contact holes. Suggest O3.560.08 [0.1400.003] holes for connector mounting holes. DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 80 Positronic Industries connectpositronic.com Compact Power Connectors RIGHT ANGLE (90) BOARD MOUNT CONNECTOR, MALE MALE RIGHT ANGLE (90) BOARD MOUNT CONNECTOR CODE 4 STANDARD PART NUMBER PCIB24W9M400A1 2X 23.75 [0.935] 14.710.65 [0.5790.026] Second Mate First Mate Position 7 Last to Mate Signal 1.15 [0.045] 12.21 [0.481] 7.96 [0.313] 4X 2.70 [0.106] 7.39 [0.291] 10.09 [0.397] 12.79 [0.504] 2X 4.20 [0.165] 10.45 [0.411] 8.85 [0.348] 13.90 [0.547] 18.95 [0.746] 9X o1.60 [0.063] 24X 2.68 [0.106] CONTACT HOLE PATTERN 15X o0.71 [0.028] Note: See below for suggested printed board hole sizes. CONNECTOR DIMENSIONS MALE RIGHT ANGLE (90) BOARD MOUNT CONNECTOR CODE 4 PART NUMBER FOR INVERTED TERMINATION PCIB24W9RM400A1 18.95 [0.746] 13.90 [0.547] 8.85 [0.348] 10.45 [0.411] 2X 4.20 [0.165] 14.710.65 [0.5790.026] Second Mate 7.39 [0.291] 7.96 [0.313] 12.21 [0.481] First Mate Position 7 Last to Mate Signal 1.15 [0.045] 4X 2.70 [0.106] 12.79 [0.504] 10.09 [0.397] 2X 23.75 [0.935] CONTACT HOLE PATTERN 15X o0.71 [0.028] 16X 2.68 [0.106] PCIB SERIES 9X o1.60 [0.063] CONNECTOR DIMENSIONS SUGGESTED PRINTED BOARD HOLE SIZES: 81 DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. Suggest O1.14 [0.045] holes for size 22 contact holes. Suggest O2.03 [0.080] holes for size 16 contact holes. Suggest O3.560.08 [0.1400.003] holes for connector mounting holes. Compact Power Connectors RIGHT ANGLE (90) BOARD MOUNT CONNECTOR, MALE Positronic Industries connectpositronic.com MALE RIGHT ANGLE (90) BOARD MOUNT CONNECTOR CODE 4 STANDARD PART NUMBER PCIB26W11M400A1 2X 23.75 [0.935] 1.15 [0.045] 4X 2.70 [0.106] 14.710.65 [0.5790.026] Position 7 Last to Mate Signal 15X o0.71 [0.028] 11X o1.60 [0.063] 7.96 [0.313] 12.21 [0.481 12.79 [0.504] 7.39 [0.291] 10.09 [0.397] 2X 4.20 [0.165] 10.45 [0.411] 8.85 [0.348] 13.90 [0.547] 18.95 [0.746] 26X 2.68 [0.106] CONTACT HOLE PATTERN Note: See below for suggested printed board hole sizes. CONNECTOR DIMENSIONS MALE RIGHT ANGLE (90) BOARD MOUNT CONNECTOR CODE 4 PART NUMBER FOR INVERTED TERMINATION PCIB26W11RM400A1 2X 23.75 [0.935] 1.15 [0.045] 4X 2.70 [0.106] 14.710.65 [0.5790.026] 2X 4.20 [0.165] 12.21 [0.481] 7.96 [0.313] Position 7 Last to Mate Signal 18.95 [0.746] 26X 2.68 [0.106] 11X o1.60 [0.063] CONTACT HOLE PATTERN PCIB SERIES 15X o0.71 [0.028] 10.09 [0.397] 7.39 [0.291] 12.79 [0.504] 10.45 [0.411] 8.85 [0.348] 13.90 [0.547] CONNECTOR DIMENSIONS SUGGESTED PRINTED BOARD HOLE SIZES: Suggest O1.14 [0.045] holes for size 22 contact holes. Suggest O2.03 [0.080] holes for size 16 contact holes. Suggest O3.560.08 [0.1400.003] holes for connector mounting holes. DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 82 Compact Power Connectors PANEL MOUNT CONNECTOR, FEMALE Positronic Industries connectpositronic.com FEMALE PANEL MOUNT CRIMP CONTACT CONNECTOR CODE 8 CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY STANDARD PART NUMBER PCIB24W9F8000 3X o4.19 [0.165] C'BORE 6X O3.56 [0.140] C'BORE 6.02 [0.237] 12.00 [0.472] 12.69 [0.500] 2X 3.83 [0.151] 44.84 [1.765] 2X Size 16 Contacts 5 mm Recessed Min. 2X o3.560.08 [o0.1400.003] 13.70 [0.540] 6.85 [0.270] PANEL CUT OUT 58.86 [2.317] 52.50 [2.067] o2.54 [o0.100] Thru 12.54 [0.494] CONNECTOR DIMENSIONS FEMALE PANEL MOUNT CRIMP CONTACT CONNECTOR CODE 8 CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY STANDARD PART NUMBER PCIB26W11F8000 11X 3.56 [0.140] C'BORE 6.02 [0.237] 12.00 [0.472] 12.69 [0.500] 2X 3.83 [0.151] 44.84 [1.765] 2X o3.560.08 [o0.1400.003] 13.70 [0.540] 6.85 [0.270] 58.86 [2.317] 52.50 [2.067] PANEL CUT OUT o2.54 [o0.100] Thru 12.54 [0.494] PCIB SERIES CONNECTOR DIMENSIONS For information regarding removable contacts, see Removable Contact section, pages 102-103. 83 DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. Compact Power Connectors PANEL MOUNT CONNECTOR, FEMALE Positronic Industries connectpositronic.com FEMALE PANEL MOUNT CRIMP CONTACT CONNECTOR WITH JACKSCREW SYSTEM CODE 8 WITH MOS* -443.0 CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY STANDARD PART NUMBER PCIB26W11F8000-443.0 58.86 [2.317] 43.70 [1.720] 12.00 [0.472] * For MOS descriptions, see chart on pages 111-112. 11X o3.56 [0.140] C'BORE 18.71 [0.736] 6.02 [0.237] 15X SIZE 22 CONTACT ROTATING JACKSCREW 2X 3.83 [0.151] 44.84 [1.765] 2X o3.560.08 [o0.1400.003] 13.70 [0.540] 11X SIZE 16 CONTACT 6.85 [0.270] PANEL CUT OUT 12.54 [0.494] 50.50 [1.988] PCIB SERIES CONNECTOR DIMENSIONS For information regarding removable contacts, see Removable Contact section, pages 102-103. DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 84 Compact Power Connectors COMPLIANT PRESS-FIT BOARD MOUNT CONNECTOR, FEMALE Positronic Industries connectpositronic.com FEMALE COMPLIANT PRESS-FIT CONNECTORS CODE 93 or 94 STANDARD PART NUMBER PCIB24W9F9300A1 PCIB24W9F9400A1 4X 2.70 [0.106] 15X Size 22 Omega Style Press-Fit Contacts 9X Size 16 Bi-Spring Style Press-Fit Contacts 2X 4.20 [0.165] 4.25 [0.167] 2.125 [0.0837] 1.15 [0.045] 24X "L" (see below) 2X 2.70 [0.106] 10.45 [0.411] 8.85 [0.348] 2X Size 16 Contacts 5mm Recessed Min. 13.90 [0.547] 18.95 [0.746] 2X 25.25 [0.994] CONTACT HOLE PATTERN CONNECTOR DIMENSIONS CONTACT TAIL LENGTH Code "L" Length Board Thickness 93 5.72 [0.225] 2.29 to 4.45 [0.090 to 0.175] 94 7.04 [0.277] 4.45 min. [0.175 min.] Note: See below for suggested printed board hole sizes, press-fit connector installation tools, and mounting screw options. FEMALE COMPLIANT PRESS-FIT CONNECTORS WITH A.C. PASS-THROUGH CODE 93 OR 94 WITH MOS* -246.5 CRIMP CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY LOW PROFILE PART NUMBER PCIB24W9F9300A1-246.5 PCIB24W9F9400A1-246.5 15X Size 22 Omega Style Press-Fit Contacts 6X Size 16 Bi-Spring Style Press-Fit Contacts Crimp contacts ordered separately (see pages 102-103) 21X "L" (see below) 4X 2.70 [0.106] 1.15 [0.045] 3X O3.30 [0.130] Min. A.C. Pass-Through Holes 2X 2.70 [0.106] 2X Size 16 Contacts 5mm Recessed Min. * For MOS descriptions, see chart on pages 111-112. 2X 4.20 [0.165] 4.25 [0.167] 2.125 [0.0837] 10.45 [0.411] 8.85 [0.348] 13.90 [0.547] 18.95 [0.746] 2X 25.25 [0.994] CONNECTOR DIMENSIONS CONTACT HOLE PATTERN PCIB SERIES CONTACT TAIL LENGTH Code "L" Length Board Thickness 93 5.72 [0.225] 2.29 to 4.45 [0.090 to 0.175] 94 7.04 [0.277] 4.45 min. [0.175 min.] SUGGESTED PRINTED BOARD HOLE SIZES: Suggest O3.560.08 [0.1400.003] holes for connector mounting holes. NOTE: See page 110 for suggested printed board drill hole sizes, recommended plating and finished hole sizes for compliant contact termination positions. For press-fit connector installation tools, see pages 108-109. 85 DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. For mounting screw options, see page 108. Compact Power Connectors COMPLIANT PRESS-FIT BOARD MOUNT CONNECTOR, FEMALE Positronic Industries connectpositronic.com FEMALE COMPLIANT PRESS-FIT CONNECTOR CODE 93 or 94 STANDARD PART NUMBER PCIB26W11F9300A1 PCIB26W11F9400A1 11X Size 16 Bi-Spring Style Press-Fit Contacts 26X "L" (see below) 15X Size 22 Omega Style Press-Fit Contacts 1.15 [0.045] 4X 2.70 [0.106] 2X 4.20 [0.165] 4.25 [0.167] 2.125 [0.0837] 2X 2.70 [0.106] 10.45 [0.411] 8.85 [0.348] 13.90 [0.547] 18.95 [0.746] 2X 25.25 [0.994] CONNECTOR DIMENSIONS CONTACT HOLE PATTERN CONTACT TAIL LENGTH Code "L" Length Board Thickness 93 5.72 [0.225] 2.29 to 4.45 [0.090 to 0.175] 94 7.04 [0.277] 4.45 min. [0.175 min.] Note: See below for suggested printed board hole sizes, press-fit connector installation tools, and mounting screw options. FEMALE COMPLIANT PRESS-FIT CONNECTOR WITH A.C. PASS-THROUGH CODE 93 or 94 WITH MOS* -246.6 CRIMP CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY 15X Size 22 Omega Style Press-Fit Contacts LOW PROFILE PART NUMBER PCIB26W11F9300A1-246.6 PCIB26W11F9400A1-246.6 6X Size 16 Bi-Spring Style Press-Fit Contacts Crimp contacts ordered separately (see pages 102-103) 21X "L" (see below) * For MOS descriptions, see chart on pages 111-112. 4X 2.70 [0.106] 1.15 [0.045] 5X O3.30 [0.130] Min. A.C. Pass-Through Holes 2X 2.70 [0.106] 8.85 [0.348] 2X 4.20 [0.165] 4.25 [0.167] 2.125 [0.0837] 10.45 [0.411] 13.90 [0.547] 18.95 [0.746] 2X 25.25 [0.994] CONTACT HOLE PATTERN PCIB SERIES CONNECTOR DIMENSIONS CONTACT TAIL LENGTH SUGGESTED PRINTED BOARD HOLE SIZES: Code "L" Length Board Thickness NOTE: See page 110 for suggested printed board drill hole sizes, recommended plating and finished hole sizes for compliant contact termination positions. 93 5.72 [0.225] 2.29 to 4.45 [0.090 to 0.175] For press-fit connector installation tools, see pages 108-109. 94 7.04 [0.277] 4.45 min. [0.175 min.] Suggest O3.560.08 [0.1400.003] holes for connector mounting holes. For mounting screw options, see page 108. DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 86 Compact Power Connectors COMPLIANT PRESS-FIT BOARD MOUNT CONNECTOR, MALE Positronic Industries connectpositronic.com MALE COMPLIANT PRESS-FIT CONNECTOR CODE 93 or 94 STANDARD PART NUMBER PCIB24W9M9300A1 PCIB24W9M9400A1 15X Size 22 Omega Style Press-Fit Contacts 9X Size 16 Bi-Spring Style Press-Fit Contacts 24X 'L' (see below) 4X 2.70 [0.106] 2X 4.20 [0.165] 1.15 [0.045] 2X 2.70 [0.106] First Mate 2.125 [0.0837] 4.25 [0.167] 10.45 [0.411] Second Mate 8.85 [0.348] 13.90 [0.547] 18.95 [0.746] 2X 25.25 [0.994] Position 7 Last to Mate Signal CONTACT HOLE PATTERN CONNECTOR DIMENSIONS CONTACT TAIL LENGTH Note: See below for suggested printed board hole sizes, press-fit connector installation tools, and mounting screw options. Code "L" Length Board Thickness 93 5.72 [0.225] 2.29 to 4.45 [0.090 to 0.175] 94 7.04 [0.277] 4.45 min. [0.175 min.] MALE COMPLIANT PRESS-FIT CONNECTOR CODE 93 or 94 STANDARD PART NUMBER PCIB26W11M9300A1 PCIB26W11M9400A1 15X Size 22 Omega Style Press-Fit Contacts 11X Size 16 Bi-Spring Style Press-Fit Contacts 26X 'L' (see below) 4X 2.70 [0.106] 2X 4.20 [0.165] 1.15 [0.045] 2X 2.70 [0.106] 2.125 [0.0837] 4.25 [0.167] 10.45 [0.411] 8.85 [0.348] 13.90 [0.547] 18.95 [0.746] 2X 25.25 [0.994] Position 7 Last to Mate Signal CONTACT HOLE PATTERN CONNECTOR DIMENSIONS PCIB SERIES CONTACT TAIL LENGTH Code 93 94 87 "L" Length Board Thickness 5.72 [0.225] 2.29 to 4.45 [0.090 to 0.175] 7.04 [0.277] 4.45 min. [0.175 min.] DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. SUGGESTED PRINTED BOARD HOLE SIZES: Suggest O3.560.08 [0.1400.003] holes for connector mounting holes. NOTE: See page 110 for suggested printed board drill hole sizes, recommended plating and finished hole sizes for compliant contact termination positions. For press-fit connector installation tools, see pages 108-109. For mounting screw options, see page 108. Compact Power Connectors COMPLIANT PRESS-FIT BOARD MOUNT CONNECTOR, MALE Positronic Industries connectpositronic.com MALE COMPLIANT PRESS-FIT CONNECTOR WITH JACKSCREW SYSTEM CODE 93 OR 94 WITH MOS* -444.0 OTHER JACKSCREW LENGTH OPTIONS AVAILABLE, CONTACT TECHNICAL SALES FOR DETAILS STANDARD PART NUMBER PCIB26W11M9300A1-444.0 PCIB26W11M9400A1-444.0 11X Size 16 Bi-Spring Style Press-Fit Contacts * For MOS descriptions, see chart on pages 111-112. 2X 4.20 [0.165] 15X Size 22 Omega Style Bi-Spring Contacts 4X 2.70 [0.106] 2.125 [0.0837] 1.15 [0.045] 2X 2.70 [0.106] 26X "L" (see below) 2X 2-56UNC-2B Fixed Jackscrew 2X O2.67 [O0.105] 8.85 [0.348] 4.25 [0.167] 10.45 [0.411] 13.90 [0.547] Position 7 Last to Mate Signal 18.95 [0.746] 2X 25.25 [0.994] CONTACT HOLE PATTERN CONNECTOR DIMENSIONS SUGGESTED PRINTED BOARD HOLE SIZES: Suggest O3.560.08 [0.1400.003] holes for connector mounting holes. NOTE: See page 110 for suggested printed board drill hole sizes, recommended plating and finished hole sizes for compliant contact termination positions. CONTACT TAIL LENGTH Code "L" Length Board Thickness 93 5.72 [0.225] 2.29 to 4.45 [0.090 to 0.175] 94 7.04 [0.277] 4.45 min. [0.175 min.] For mounting screw options, see page 108. PCIB SERIES For press-fit connector installation tools, see pages 108-109. DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 88 Compact Power Connectors PCIB ORDERING INFORMATION Positronic Industries connectpositronic.com ORDERING INFORMATION - CODE NUMBERING SYSTEM Specify Complete Connector By Selecting An Option From Step 1 Through 7 STEP 1 2 EXAMPLE PCIB 26W11 3 4 5 6 7 8 F 93 0 0 A1 /AA 9 STEP 9 - SPECIAL OPTIONS STEP 1 - BASIC SERIES FOR LISTING OF SPECIAL OPTIONS, SEE SPECIAL OPTIONS APPENDIX ON PAGES 111 AND 112. PCIB - PCIB Series STEP 2 - CONNECTOR VARIANTS * EC 5/ Compliant IES RoHS Di STEP 8 - ENVIRONMENTAL COMPLIANCE OPTIONS NIC INDU TR POS O S 26W11R - 11 size 16 contacts and 15 size 22 contacts. Inverted termination style, use with contact type "4" R EU 26W11 - 11 size 16 contacts and 15 size 22 contacts r * pe 24W9R - 9 size 16 contacts and 15 size 22 contacts. Inverted termination style, use with contact type "4" IT 24W9 - 9 size 16 contacts and 15 size 22 contacts rec tive 2002 /9 /AA - Compliant per EU Directive 2002/95/EC (RoHS) NOTE: If compliance to environmental legislation is not required, this step will not be used. Example: PCIB26W11F9300A1 STEP 7 - CONTACT PLATING FOR PRINTED BOARD TYPE CONNECTORS STEP 3 - CONNECTOR GENDER F - Female M - Male 0- Crimp contacts ordered separately A1 - Gold flash over nickel on mating end and termination end. A2 - Gold flash over nickel on mating end and 5.00 microns [0.00020 inch] tin-lead solder coat on termination end. Not available with code 93 or code 94 in step 4. 3 - Solder, Straight Printed Board Mount with 4.50 [0.177] tail extension for connection system 1. C1 - 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end. 4 - Solder, Right Angle (90) Printed Board Mount with 2.68 [0.106] tail extension for connection systems 1 and 4. C2 - 0.76 microns [0.000030 inch] gold over nickel on mating end and 5.00 microns [0.00020 inch] tin-lead solder coat on termination end. Not available with code 93 or code 94 in step 4. D1 - 1.27 microns [0.000050 inch] gold over nickel on mating end and termination end. D2 - 1.27 microns [0.000050 inch] gold over nickel on mating end and 5.00 microns [0.00020 inch] tin-lead solder coat on termination end. Not available with code 93 or code 94 in step 4. STEP 4 - CONTACT TERMINATION TYPE 8 - Contacts must be ordered separately for Panel Mount Cable Connectors, connection system 3, see pages 102-103. Female connector only. 93 - Press-Fit, Compliant Termination size 16 and size 22 Straight Printed Board Mount for use with board thicknesses of 2.29 to 4.45 [0.090 to 0.175]. Connection system 1. 94 - Press-Fit, Compliant Termination size 16 and size 22 Straight Printed Board Mount for use with board thickness of 4.45 minimum [0.175 minimum]. Connection system 1. STEP 5 - MOUNTING STYLE NOTE: Once you have made a connector selection, contact Technical Sales if you would like to receive a drawing in DXF, PDF format or a 3-dimensional IGES file. 0 - Standard Option See page 108 for mounting screw options. PCIB SERIES STEP 6 - HOODS 0 - Not applicable SK Drawing 89 DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 3-dimensional model