1
12345
JST
This 2.5mm pitch connector is used to
connect wires to printed circuit boards.
The header is available in three
configurations: top, side, and bottom entry.
This allows the wires to be perpendicular
or parallel to the printed circuit board in
any direction.
Features ––––––––––––––––––––––––
• Superior folded beam construction
(1) This sturdy construction withstands repeated stress, resists
permanent deformation, and offers a very long service life.
(2) High reliability is ensured whether the contact pressure is
high or low.
(3) This contact design has a large tolerance for variations in
mating post thickness and resists deformation when pried.
• Double-sided contact
(1) The receptacle contact has a protected entry which
eliminates contact damage caused by mismating.
(2) It provides high contact pressure, is free from abnormal
stress, and maintains continuity at all times.
(3) It has an extremely long service life due to its folded beam
design.
• Wide, sturdy post
The post has a large cross-sectional area to resist prying
during insertion into printed circuit boards and mating with
connector housings.
• Molded-in header
The posts are molded into the insulator to provide stability
when mounted on printed circuit boards. This also prevents
flux from entering the connector during soldering.
Specifications –––––––––––––––––––
• Current rating: 3A AC, DC (AWG #22)
• Voltage rating: 250V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 15m Ωmax.
After environmental testing/ 20m Ωmax.
• Insulation resistance: 500M Ωmin.
• Withstanding voltage: 1,500V AC/minute
• Applicable wire: AWG #30 to #22
• Applicable PC board thickness: 1.6mm
*Compliant with RoHS.
*Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
2J50168090
NH CONNECTOR
Disconnectable Crimp style connectors
2.5mm
pitch
Crimp
2
NH CONNECTOR
Contact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
9
3.8 4
2.2
1.95
1.7 1.2
0.7
Model No. Applicable wire
mm2AWG #
Insulation O.D. (mm)
1.2 to 1.7
0.9 to 1.2
Q'ty /
reel
Material and Finish
SHF-001T-0.8BS
SHF-002T-0.8BS
0.08 to 0.33
0.05 to 0.08
28 to 22
30 to 28
Phosphor bronze, tin-plated (reflow treatment)
5,000
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
4.6 1.8
A
B
C
3 11.7
1.5
2
Cir-
cuits Model No. Dimensions (mm)
AB C
Q'ty /
bag
Material
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
20
21
22
24
25
H 2P-SHF-AA
H 3P-SHF-AA
H 4P-SHF-AA
H 5P-SHF-AA
H 6P-SHF-AA
H 7P-SHF-AA
H 8P-SHF-AA
H 9P-SHF-AA
H10P-SHF-AA
H11P-SHF-AA
H12P-SHF-AA
H13P-SHF-AA
H14P-SHF-AA
H15P-SHF-AA
H16P-SHF-AA
H18P-SHF-AA
H20P-SHF-AA
H21P-SHF-AA
H22P-SHF-AA
H24P-SHF-AA
H25P-SHF-AA
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
37.5
42.5
47.5
50.0
52.5
57.5
60.0
5.7
8.2
10.7
13.2
15.7
18.2
20.7
23.2
25.7
28.2
30.7
33.2
35.7
38.2
40.7
45.7
50.7
53.2
55.7
60.7
63.2
8.7
11.2
13.7
16.2
18.7
21.2
23.7
26.2
28.7
31.2
33.7
36.2
38.7
41.2
43.7
48.7
53.7
56.2
58.7
63.7
66.2
1,000
1,000
1,000
1,000
1,000
500
500
500
500
500
500
500
500
200
200
200
200
200
200
200
200
PA 6, UL94V-0, natural (white)
RoHS compliance
Note:
1. Contact JST for gold-plated products.
2. Also contact JST if you require shielded wires, thin wires or other special
wires.
3. Contact JST for brass products.
RoHS compliance
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. H2P-SHF-AA-oo-
(blank)…natural (white)
K…black R…red TR…tomato red E…blue M…green
O…orange N…brown
3
NH CONNECTOR
Header ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
A
0.64
1
2.5
0.64
63.4 3.2
5.6
A
6
0.64
2.5
1
3.5
5.5 3
5.63
0.64
10
A
11.4
0.64
2.5
1
3
3.4
5.8
6
7
3.3
3.5
Cir-
cuits
Model No.
Top entry
type
Side entry
type
Bottom entry
type
Dimen-
sions A
(mm)
Top
entry
type
Side
entry
type
Bottom
entry
type
Q'ty / box
Material and Finish
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
B 2P-SHF-1AA
B 3P-SHF-1AA
B 4P-SHF-1AA
B 5P-SHF-1AA
B 6P-SHF-1AA
B 7P-SHF-1AA
B 8P-SHF-1AA
B 9P-SHF-1AA
B10P-SHF-1AA
B11P-SHF-1AA
B12P-SHF-1AA
B13P-SHF-1AA
B14P-SHF-1AA
B15P-SHF-1AA
B16P-SHF-1AA
B17P-SHF-1AA
B18P-SHF-1AA
B19P-SHF-1AA
B20P-SHF-1AA
B21P-SHF-1AA
B22P-SHF-1AA
B23P-SHF-1AA
B24P-SHF-1AA
B25P-SHF-1AA
BS 2P-SHF-1AA
BS 3P-SHF-1AA
BS 4P-SHF-1AA
BS 5P-SHF-1AA
BS 6P-SHF-1AA
BS 7P-SHF-1AA
BS 8P-SHF-1AA
BS 9P-SHF-1AA
BS10P-SHF-1AA
BS11P-SHF-1AA
BS12P-SHF-1AA
BS13P-SHF-1AA
BS14P-SHF-1AA
BS15P-SHF-1AA
BS16P-SHF-1AA
–
BS18P-SHF-1AA
–
BS20P-SHF-1AA
BS21P-SHF-1AA
BS22P-SHF-1AA
–
BS24P-SHF-1AA
BS25P-SHF-1AA
BE 2P-SHF-1AA
BE 3P-SHF-1AA
BE 4P-SHF-1AA
BE 5P-SHF-1AA
BE 6P-SHF-1AA
BE 7P-SHF-1AA
BE 8P-SHF-1AA
BE 9P-SHF-1AA
BE10P-SHF-1AA
BE11P-SHF-1AA
BE12P-SHF-1AA
BE13P-SHF-1AA
BE14P-SHF-1AA
BE15P-SHF-1AA
–
–
–
–
–
–
–
–
–
–
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
37.5
40.0
42.5
45.0
47.5
50.0
52.5
55.0
57.5
60.0
1,000
1,000
1,000
1,000
500
500
500
500
250
250
250
250
250
250
250
200
200
250
250
250
250
250
250
250
1,000
1,000
500
500
500
500
500
500
250
250
200
200
200
200
200
–
200
–
200
200
200
–
200
200
250
250
250
250
150
150
150
150
100
100
100
100
50
50
–
–
–
–
–
–
–
–
–
–
Post: Brass, copper-undercoated, tin-plated (reflow treatment)
Wafer: PA 66, UL94V-0, natural (white) for the top and side entry types
PA 6, UL94V-0, natural (white) for the bottom entry type
Top entry type
Side entry type
Bottom entry type
RoHS compliance This product displays (LF)(SN) on a label.
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. B2P-SHF-1AA-oo-
(blank)…natural (white)
BK…black R…red TR…tomato red E…blue M…green
O…orange N…brown
4
PC board layout (viewed from soldering side) and Assembly layout –––––––––––––––––––
14.9
2.5±0.05 2.5±0.05
3.1min.
3.1min.
3.5min.
3 to 12
6.5
3.5 3
1.6
14.73
17.7
1.6 6.5
3.1 1.6
14.7
9.52.8
12.2
7.5min. 3max.
2.5±0.05
4min.
φ
0.9+0.1
0φ
0.9+0.1
0
φ
0.9+0.1
0
Note:
1. Tolerances are non-cumulative: ±0.05mm for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline.
Contact JST for details.
Top entry type Side entry type
Bottom entry type
NH CONNECTOR
SHF-001T-0.8BS AP-K2N MKS-L MK/SHF-001-08S APLMK SHF001-08S
*MKS-SC SC/SHF-001-08S APLSC SHF001-08S
SHF-002T-0.8BS AP-K2N MKS-L MK/SHF-002-08S APLMK SHF002-08S
*MKS-SC SC/SHF-002-08S APLSC SHF002-08S
Note: *Strip-crimp applicator
Contact Crimping machine Crimp applicator Dies Crimp applicator with dies
Crimping machine, Applicator–––––––––––––––––––––––––––––––––––––––––––––––