FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE KAMAYA OHM RMC 1. 01005 to 2512 inch size and Jumper chip available. 2. 0.1W is available for 0402 inch (RMC1/16S). 3. Precise dimension by Laser-scriber method (RMC1/20 RMC1/32). 4. Press Pocket Taping package (RMC1/20 RMC1/32). 5. Stability Class : 5% W L c c d d Rated resistance value marking is 3-digit on the over coating except RMC1/16S & RMC1/20 & RMC1/32. 4-digit marking is available for F & G tolerance except RMC1/16, RMC1/16S & RMC1/20 & RMC1/32 type. H Chip Resistors Unit : mm ! Metric 0402 0603 1005 1608 2012 3216 3225 5025 6332 Inch 01005 0201 0402 0603 0805 1206 1210 2010 2512 L 0.40.02 0.60.03 1.00.05 1.60.1 2.00.1 3.20.15 3.20.15 5.00.15 6.30.15 W 0.2 0.02 0.3 0.03 0.5 0.05 0.8 0.15 0.05 1.25 0.10 1.6 0.15 2.5 0.15 2.5 0.15 3.2 0.15 H 0.130.02 0.230.03 0.350.05 0.450.10 0.550.10 0.550.10 0.550.15 0.550.15 0.550.15 c 0.080.03 0.10.05 0.20.1 0.30.1 0.40.2 0.50.25 0.50.25 0.60.2 0.60.2 d 0.1 0.03 0.15 0.05 0.25 0.05 0.10 0.3 0.1 0.4 0.2 0.5 0.25 0.5 0.25 0.6 0.2 0.6 0.2 *Unit weight/pc. 0.035mg 0.16mg 0.6mg 2mg 5mg 9mg 16mg 25mg 40mg *Values for reference Example Style RMC Product Type 1/10 K 103 Temperature Coefficient of Resistance - Standard Resistor K 10010-6/C None Jumper F Tolerance on Rated Resistance F 1% G 2% Resistor J 5% K 10% None Rated Dissipation & Size Code Rated Dissipation Metric Inch 0.03W 1/32 0402 01005 0.05W 1/20 0603 0201 1/16S 1005 0402 0.1W 1/16 1608 0603 2012 1/10 0.125W 0805 1/8 3216 1206 0.25W 1/4 3225 1210 1/2 0.75W 5025 2010 1 1.0W 6332 2512 2 Rated Resistance E24 Series e.g. : 2R2=2.2 ohm 3-Digit 103=10k ohm E96 Series e.g. : 10R2=10.2 ohm 4-Digit 1002=10k ohm JP TP Resistor Jumper B PA *Packaging & Standard Qty. (Min.) Bulk (Loose Package) 1,000pcs. All Styles 20,000pcs. RMC1/32 Press-Pocket Paper Tape (2 mm pitch) 15,000pcs. RMC1/20 TH Paper Tape (2 mm pitch) 10,000pcs. TP Paper Tape 5,000pcs. TE Embossed Tape 4,000pcs. BA Bulk Case Jumper 25,000pcs. 10,000pcs. 5,000pcs. RMC1/16S RMC1/16 RMC1/16 RMC1/10 RMC1/8 RMC1/4 RMC1/2 RMC1 RMC1/16 RMC1/10 RMC1/8 *Refer to Tape and Packaging information on pages 46 and 47. *Please contact Kamaya sales department for 1mm pitch taping of RMC1/16s, 1/20. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. KAMAYA OHM *Ratings Size Metric (Inch) Rated Dissipation at 70C W 0402 01005 0.03 (0.5A) Style RMC1/32 Tolerance Temperature Coefficient Limiting of Resistance Element on Rated Voltage -6 Resistance Code 10 /C V Rated Resistance Range 1 10 100 1M 10M 4.79.1 1091 J 1001M J 0.470.91 0603 0201 RMC1/20 19.76 0.05 (1.0A) F, J 1097.6 F, G, J 1001M 1.1M10M 19.76 1005 0402 RMC1/16S 101M 1608 0603 RMC1/16 1.02M10M 0.1 (1.0A) 0.470.91 19.76 1010M 11M22M 0.270.91 2012 0805 RMC1/10 19.76 0.125 (2.0A) 102.2M 2.21M10M 11M22M 0.220.91 19.76 3216 1206 RMC1/8 101M 1.02M10M 0.25 (2.0A) 11M24M 0.20.91 19.76 3225 1210 RMC1/4 101M 1.02M10M 11M22M 0.330.91 5025 2010 RMC1/2 19.76 0.75 (2.0A) 101M 1.1M22M 0.330.91 6332 2512 RMC1 19.76 1.0 (2.0A) 101M 1.1M22M Note1. Note2. Note3. Note4. Note5. Note6. 600-200 300 200 - 200 - - K - - - - K - - - - K 500-200 200 100 200 1,000300 500-200 200 100 200 1,000300 500-200 200 100 - 200 - - - K - 1,000300 500-200 200 100 - - - K - 1,000300 500-200 200 100 - - - K - - - - K - 1,000300 500-200 200 100 200 1,000300 500-200 200 100 200 1000300 600-200 300 Category Temperature Range C 15 50 -55125 25 50 100 150 -55155 200 500 200 200 E24 series is available , E96 series is available for tolerance"F"(1%) Rated Voltage = (Rated Dissipation)(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage. Jumper : Resistance value is less than 50m ohm. Please contact KAMAYA for RMC1/32 F(1%). The derated values of dissipation for temperatures in excess of 70C shall be indicated by the following Curve. (For Jumpers the load current shall be derated according to the Derating Curve ) Percentage of the rated dissipation (current)(%) J F, J G, J F F, G, J K F, G, J G, J F J K F, G, J G, J F F, G, J J K F, G, J G, J F F, G, J J K F, J G, J F F, G, J J K F, J G, J F J K F, J G, J F J - - - - - - Isolation Voltage V 100 RMC 1/16S, 1/16, 1/10, 1/8, 1/4, 1/2, 1 RMC 1/32, 1/20 ! 55/125/56 : RMC1/32, 1/20 55/155/56 : RMC1/16S, 1/16, 1/10, 1/8, 1/4, 1/2, 1 Lower Category Temperature Upper Category Temperature Duration of the Damp heat, Steady-State Test RMC1/32, 1/20 -55C +125C 56 days RMC1/16S, 1/16, 1/10, 1/8, 1/4, 1/2, 1 -55C +155C 56 days Area of recommended operation 0 55 70 125 155 Ambient Temperature (C) Description Requirements Clause 4.7 Voltage proof No breakdown or flashover R1G ohm Variation of resistance with temperature See Ratings Table Clause 4.8 Overload DR(1%+0.05 ohm) Clause 4.13 Solderability Resistance to soldering heat Rapid change of temperature No visible damage, legible marking In accordance with Clause 4.17.4.5 DR(1%+0.05 ohm) DR(1%+0.05 ohm) No visible damage Climatic sequence DR(5%+0.1 ohm) No visible damage Damp test, steady state Endurance at 70C Endurance at the upper category temperature Adhesion Bend strength of the face plating DR(5%+0.1 ohm) No visible damage, legible marking DR(5%+0.1 ohm) No visible damage DR(5%+0.1 ohm) No visible damage No visible damage DR(1%+0.05 ohm) Test Methods RMC1/32,1/20 50Va.c.,60s RMC1/16S,1/16 100Va.c.,60s RMC1/10~1 500Va.c.,60s +20C/-55C/+20C/+125C/+20C : RMC1/32, 1/20 +20C/-55C/+20C/+155C/+20C : RMC1/16S~1 The applied voltage shall be 2.5 times of the rated voltage or twice of the limiting element voltage, whichever is the less severe, 2s. 235C, 2s After immersion into the flux, the immersion into solder shall be carried out in Solder bath at 260C for 5s. Clause 4.19 5 cycles between -55C and +125C : RMC1/32, 1/20 5 cycles between -55C and +155C : RMC1/16S~1 Clause 4.23 Dry/Damp heat (12+12h cycle), first cycle./ Cold/Damp heat (12+12h cycle), remaining cycle./ D.C.Load. Clause 4.24 40C, 95%R.H., 56 days, test a) and b) of Clause 4.24.2.1 Clause 4.25.1 Rated voltage, 1.5h"ON", 0.5h"OFF", 70C, 1,000h Clause 4.25.3 125C, no-load, 1,000h. : RMC1/32, 1/20 155C, no-load, 1,000h. : RMC1/16S~1 Clause 4.32 5N, 10s ( RMC1/20 = 3N , RMC1/32 = 2N ) Clause 4.33 RMC1/32~1/4 Amount of bend : 3 mm RMC1/2, 1 Amount of bend : 1 mm Clause 4.17 Clause 4.18 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 3 Chip Resistors RMC FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE