181
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Receptacle Assemblies, Single-Row, Outrigger Design
.100 x .100 [2.54 x 2.54] Centerline, End To End Stackable
AMPMODU Interconnection System
Vertical Mount,
Receptacle Assemblies
5
No. of Dimensions Contact Plating/Part Nos.
Pos. A B Plating A Plating B Plating C
3.300 [7.62] .200 [5.08] 5-147720-2 5-147726-2 5-147727-2
4.400 [10.16] .300 [7.62] 5-147720-3 5-147726-3 5-147727-3
5.500 [12.70] .400 [10.16] 5-147720-4 5-147726-4 5-147727-4
6.600 [15.24] .500 [12.70] 5-147720-5 5-147726-5 5-147727-5
7.700 [17.78] .600 [15.24] 5-147720-6 5-147726-6 5-147727-6
8.800 [20.32] .700 [17.78] 5-147720-7 5-147726-7 5-147727-7
9.900 [22.86] .800 [20.32] 5-147720-8 5-147726-8 5-147727-8
10 1.000 [25.40] .900 [22.86] 5-147720-9 5-147726-9 5-147727-9
11 1.100 [27.94] 1.000 [25.40] 6-147720-0 6-147726-0 6-147727-0
12 1.200 [30.48] 1.100 [27.94] 6-147720-1 6-147726-1 6-147727-1
13 1.300 [33.02] 1.200 [30.48] 6-147720-2 6-147726-2 6-147727-2
14 1.400 [35.56] 1.300 [33.02] 6-147720-3 6-147726-3 6-147727-3
15 1.500 [38.10] 1.400 [35.56] 6-147720-4 6-147726-4 6-147727-4
16 1.600 [40.64] 1.500 [38.10] 6-147720-5 6-147726-5 6-147727-5
17 1.700 [43.18] 1.600 [40.64] 6-147720-6 6-147726-6 6-147727-6
18 1.800 [45.72] 1.700 [43.18] 6-147720-7 6-147726-7 6-147727-7
19 1.900 [48.26] 1.800 [45.72] 6-147720-8 6-147726-8 6-147727-8
20 2.000 [50.80] 1.900 [48.26] 7-147720-8 7-147726-8 7-147727-8
30 3.000 [76.20] 2.900 [73.66] 8-147720-8 8-147726-8 8-147727-8
40 4.000 [101.60] 3.900 [99.06] 8-147720-9 8-147726-9 8-147727-9
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension and add .062 [1.57] for recommended board thickness if used in
bottom entry application.
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-0.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
.245
[6.22]
.140
[3.56]
.075 +.005
-.000
[
1.90 +0.13
]
-.000
.140
[3.56]
.125±.010
[3.17±0.25]
Ty p .
Recommended PC Board Hole Layout
.020
[0.51]
(Standoffs)
B
.100
[2.54]
Ty p .
.053
[1.34]
Ty p .
.200
[5.08]
.035±.003
[0.89±0.08] Dia.
.200±.003
[5.08±0.08]
Ty p .
.100
[2.54]
Ty p .
A
Dual Entry, End Stackable,
Low Profile, .100 x .100
[2.54 x 2.54] Centerline,
.200 [5.08] Tine Spacing
.107
[2.72]
(Localized Gold
Plate Area)
.148
[3.77]
Ty p .
Point of
Contact
Note: All part numbers are RoHS
compliant.
182
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Receptacle Assemblies, Double-Row, Outrigger Design,
.100 x .100 [2.54 x 2.54] Centerline, End to End Stackable
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Vertical Mount,
Receptacle Assemblies
5
No. of Dimensions Contact Plating/Part Nos.
Pos. A B Plating A Plating B Plating C
2.100 [2.54] — 6-534267-3 5-147099-1 8-147100-9
4.200 [5.08] .100 [2.54] 6-534267-7 5-147099-2 9-147100-0
6.300 [7.62] .200 [5.08] 6-534267-4 5-147099-3 5-147100-1
8.400 [10.16] .300 [7.62] 5-534267-5 5-147099-4 5-147100-2
14 .700 [17.78] .600 [15.24] 5-534267-1 5-147099-7 5-147100-5
18 .900 [22.86] .800 [20.32] 6-534267-0 5-147099-9 5-147100-7
20 1.000 [25.40] .900 [22.86] 5-534267-2 6-147099-0 5-147100-8
24 1.200 [30.48] 1.100 [27.94] 5-534267-9 6-147099-2 6-147100-0
30 1.500 [38.10] 1.400 [35.56] 6-534267-2 6-147099-5 6-147100-3
36 1.800 [45.72] 1.700 [43.18] 6-534267-5 6-147099-8 6-147100-6
40 2.000 [50.80] 1.900 [48.26] 5-534267-7 7-147099-0 6-147100-8
48 2.400 [60.96] 2.300 [58.42] 6-534267-1 7-147099-4 7-147100-2
50 2.500 [63.50] 2.400 [60.96] 6-534267-8 7-147099-5 7-147100-3
60 3.000 [76.20] 2.900 [73.66] 5-534267-8 8-147099-0 7-147100-8
76 3.800 [96.52] 3.700 [93.98] 6-534267-6 8-147099-8 8-147100-6
80 4.000 [101.60] 3.900 [99.06] 5-534267-4 9-147099-0 8-147100-8
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the
maximum point-of-contact dimension and .062 for recommended board thickness if used in bottom entry
application.
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult Tyco Electronics.
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Dual Entry, End Stackable,
Low Profile, .100 x .100
[2.54 x 2.54] Centerline,
.300 [7.62] Tine Spacing
.245
[6.22]
Ty p .
.300
[7.62]
Ty p .
A
.100±.003
[2.54±0.08]
.125±.010
[3.17±0.25]
.050
[1.27]
Max.
Ty p .
Recommended PC Board Hole Layout
.035±.003
[0.89±0.08]
.020
[0.51]
(Standoffs)
B
Dia.
Ty p .
.100
[2.54]
Ty p .
.100
[2.54]
Ty p . .100
[2.54]
Ty p .
.148
[3.77]
Ty p .
.100
[2.54]
Ty p .
.100
[2.54]
Ty p .
.198
[5.03]
Dia.
Ty p .
.075+.005
.060
-0.00
1.90+0.13
-0.00
[]
Keying Plug
.107
[2.72]
Ty p .
(Localized Gold
Plate Area)
Point of
Contact
183
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod. IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
AMPMODU Interconnection System
Vertical Mount,
Receptacle Assemblies
5
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
Closed Dual Entry, Side and
End Stackable Low Profile,
.100 x .100 [2.54 x 2.54]
Centerline, .150 [3.81] Tine
Spacing
.100±.003
[2.54±0.08]
.245
[6.22]
Ty p .
.020
[0.51]
Ty p .
(Standoffs)
A
.198
[5.03]
.050
[1.27]
Max.
Ty p . .150
[3.81]
Ty p .
.130±.010
[3.30±0.25]
Ty p .
.148
[3.77]
Ty p .
Point of
Contact
.107
[2.72]
Ty p .
(Localized Gold
Plate Area)
No. of Dimensions Contact Plating/Part Nos.
Pos. A B Plating A Plating B Plating C
2.100 [2.54] — 5-535542-1 5-147095-1 5-147096-1
4.200 [5.08] .100 [2.54] 5-535542-2 5-147095-2 5-147096-2
6.300 [7.62] .200 [5.08] 5-535542-3 5-147095-3 5-147096-3
8.400 [10.16] .300 [7.62] 5-535542-4 5-147095-4 5-147096-4
10 .500 [12.70] .400 [10.16] 5-535542-5 5-147095-5 5-147096-5
12 .600 [15.24] .500 [12.70] 5-535542-6 5-147095-6 5-147096-6
14 .700 [17.78] .600 [15.24] 5-535542-7 5-147095-7 5-147096-7
16 .800 [20.32] .700 [17.78] 5-535542-8 5-147095-8 5-147096-8
18 .900 [22.86] .800 [20.32] 5-535542-9 5-147095-9 5-147096-9
20 1.000 [25.40] .900 [22.86] 6-535542-0 6-147095-0 6-147096-0
22 1.100 [27.94] 1.000 [25.40] 6-535542-1 6-147095-1 6-147096-1
24 1.200 [30.48] 1.100 [27.94] 6-535542-2 6-147095-2 6-147096-2
26 1.300 [33.02] 1.200 [30.48] 6-535542-3 6-147095-3 6-147096-3
28 1.400 [35.56] 1.300 [33.02] 6-535542-4 6-147095-4 6-147096-4
30 1.500 [38.10] 1.400 [35.56] 6-535542-5 6-147095-5 6-147096-5
32 1.600 [40.64] 1.500 [38.10] 6-535542-6 6-147095-6 6-147096-6
34 1.700 [43.18] 1.600 [40.64] 6-535542-7 6-147095-7 6-147096-7
36 1.800 [45.72] 1.700 [43.18] 6-535542-8 6-147095-8 6-147096-8
38 1.900 [48.26] 1.800 [45.72] 6-535542-9 6-147095-9 6-147096-9
40 2.000 [50.80] 1.900 [48.26] 7-535542-0 7-147095-0 7-147096-0
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in bot-
tom entry application.
.100
[2.54]
.100*
[2.54]
Ty p . .100
[2.54]
Ty p .
B
Recommended PC Board Hole Layout
for Bottom Entry or Pass Through Applications
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Recommended PC Board Hole Layout
for Top Entry
.035±.003
[0.89±0.08] Dia. Typ.
B
Dia.
Ty p .
.075+.005
.060
-.000
1.90+0.13
-0.00
[].100
[2.54]
Ty p .
.150
[3.81]
Ty p .
Note: All part numbers are RoHS
compliant.
184
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod. IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Vertical Mount,
Receptacle Assemblies
5
No. of Dimensions Contact Plating/Part Nos.
Pos. A B Plating A Plating B Plating C
42 2.100 [53.34] 2.000 [50.80] 7-535542-1 7-147095-1 7-147096-1
44 2.200 [55.88] 2.100 [53.34] 7-535542-2 7-147095-2 7-147096-2
46 2.300 [58.42] 2.200 [55.88] 7-535542-3 7-147095-3 7-147096-3
48 2.400 [60.96] 2.300 [58.42] 7-535542-4 7-147095-4 7-147096-4
50 2.500 [63.50] 2.400 [60.96] 7-535542-5 7-147095-5 7-147096-5
52 2.600 [66.04] 2.500 [63.50] 7-535542-6 7-147095-6 7-147096-6
54 2.700 [68.58] 2.600 [66.04] 7-535542-7 7-147095-7 7-147096-7
56 2.800 [71.12] 2.700 [68.58] 7-535542-8 7-147095-8 7-147096-8
58 2.900 [73.66] 2.800 [71.12] 7-535542-9 7-147095-9 7-147096-9
60 3.000 [76.20] 2.900 [73.66] 8-535542-0 8-147095-0 8-147096-0
62 3.100 [78.74] 3.000 [76.20] 8-535542-1 8-147095-1 8-147096-1
64 3.200 [81.28] 3.100 [78.74] 8-535542-2 8-147095-2 8-147096-2
66 3.300 [83.82] 3.200 [81.28] 8-535542-3 8-147095-3 8-147096-3
68 3.400 [86.36] 3.300 [83.82] 8-535542-4 8-147095-4 8-147096-4
70 3.500 [88.90] 3.400 [86.36] 8-535542-5 8-147095-5 8-147096-5
72 3.600 [91.44] 3.500 [88.90] 8-535542-6 8-147095-6 8-147096-6
74 3.700 [93.98] 3.600 [91.44] 8-535542-7 8-147095-7 8-147096-7
76 3.800 [96.52] 3.700 [93.98] 8-535542-8 8-147095-8 8-147096-8
78 3.900 [99.06] 3.800 [96.52] 8-535542-9 8-147095-9 8-147096-9
80 4.000 [101.60] 3.900 [99.06] 9-535542-0 9-147095-0 9-147096-0
185
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Surface Mount Vertical Receptacle Assemblies,
.100 x .100 [2.54 x 2.54] Centerline
AMPMODU Interconnection System
5
Surface Mount Receptacle
Assemblies
The AMPMODU 0.025 [0.64]
square interconnection
system is an industry
standard that has provided
level III and IV thru-hole
interconnections to almost
every industry and
marketplace for years.
As technology advances,
so has the AMPMODU
product line.
Surface mount vertical
receptacle assemblies are
available to meet your level
II packaging needs as
process technologies
evolve from wave soldering
to surface mount reflow
(infrared and vapor-phase)
processes. AMPMODU
surface mount receptacle
assemblies are offered in
vertical dual entry
configurations. These
receptacles are available in
single-row and double-row
configurations with a
contact centerline spacing
of .100 x .100 [2.54 x 2.54].
AMPMODU surface mount
vertical receptacle
assemblies continue to
provide the proven features
and benefits of their
thru-hole counterparts in the
AMPMODU product family.
Closed-entry style housing
design provides a lead-in
ramp for positive mating of
contacts, virtually eliminating
the possibility of stubbing.
The dual-beam receptacle
contact design, coupled with
gold plating in the contact
area, provides a reliable
interface. Tin plating on the
solder tails also enhances
solderability.
The incorporation of
compliant metallic hold
downs on receptacle
assemblies offers multiple
benefits. The hold downs
provide for proper lead-to-
pad registration and provide
retention to the PC board
prior to and during
processing. Used with a
plated thru-hole, the hold
downs are soldered during
the reflow process and
serve as a strain relief for
the solder joints during
mating/unmating.
The design of the hold
downs results in an
excellent ratio of
insertion/extraction forces
(into the PC board); 20 lb.
[89 N] maximum insertion
force per pair and 10 lb.
[44.5 N] minimum extraction
force per pair (unsoldered).
No tools are required for
insertion.
Product Facts
■Surface Mount Leads
■Contact Material:
phosphor bronze
■High temperature, black
thermoplastic housings,
94V-0 rated, capable of
withstanding IR or vapor-
phase reflow
■Gold/tin duplex plating
for reliable mating
interconnection and solder
interface
■Metallic hold downs provide
retention in the PC board
prior to and during the
reflow process … and strain
relief after soldering
■Hold downs provide for
proper lead-to-pad
registration
■Closed-entry receptacle
housings provide lead-in
ramp for positive mating
■Receptacle contacts employ
dual cantilever beams for
reliable connections
■Recognized under the
Component Program
of Underwriters
Laboratories Inc.
File No. E28476
■Certified by
Canadian Standards
Association,
File No. LR 7189
R
R
186
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Surface Mount Vertical Receptacle Assemblies,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
AMPMODU Interconnection System
Surface Mount Receptacle
Assemblies
5
Performance Specifications Voltage Rating: 250 VAC
Current Rating: 3.0 amperes (max.) for single contact;
2.0 amperes (max.) per contact when connector is fully energized
Operating Temperature Range (Receptacle Assemblies): –65°C to +125°C
Operating Temperature Range (Headers): -65°C to +105°C
Dielectric Withstanding Voltage: 750 VAC
Termination Resistance: 12 milliohms (max.)
Insulation Resistance: 5000 megohms (min.)
Mating Force (Receptacle Assemblies): 9.0 oz. [2.50N] (max.) per contact
Unmating Force (Receptacle Assemblies): 1.5 oz. [0.42N] (min.) per contact
Durability: Tested to 200 cycles (min.) for .000030 [0.00076] gold plated contacts
187
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Receptacle Assemblies, Single-Row, Surface Mount,
.100 [2.54] Centerline with Compliant Pin Hold Downs
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Surface Mount Receptacle
Assemblies
5
Surface Mount, Single-Row,
Dual Entry with Compliant
Pin Holddowns
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
as follows:
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to Mating Post Selection Guide —
page 90
Performance Specifications —
page 186
.265
[6.73]
Ty p .
.038
[0.97]
.020
[0.51]
.030 0.76
.025
[
0.64
]
Ty p .
.140
[3.56]
.100
[2.54] Ty p .
.107
[2.72]
(Localized Gold
Plate Area)
.208
[5.28] Max.
(Depressed)
.148
[3.77]
Point of
Contact
D
C
A
D
B
C
P.C. Board .069
[1.75]
.090
[2.28] Ty p .
.060
[1.52] Min.
.100
[2.54]
.040±.003
[1.02±0.08]
Dia. Typ.
(For bottom
entry or pass
thru applica-
tions)
.042±.003
[1.07±0.08] Dia.
.075
[1.91]
.110
[2.79]
.228
[5.78]
Recommended PC Board Pad Pattern
(.008 [0.20] thick stencil)
Packaged in Tubes Packaged in Tape & Reel
No. of Dimensions Contact Plating/ Part Nos. Contact Plating/ Part Nos.
Pos. ABCD
Plating A Plating B Plating C Plating A Plating B Plating C
3.500 [12.70] .200 [5.08] See note 3 .400 [10.16] 5-147744-1 5-147743-1 5-147742-1 5-147724-1 5-147730-1 5-147731-1
4.600 [15.24] .300 [7.62] See note 3 .500 [12.70] 5-147744-2 5-147743-2 5-147742-2 5-147724-2 5-147730-2 5-147731-2
5.700 [17.78] .400 [10.16] See note 3 .600 [15.24] 5-147744-3 5-147743-3 5-147742-3 5-147724-3 5-147730-3 5-147731-3
6.800 [20.32] .500 [12.70] See note 3 .700 [17.78] 5-147744-4 5-147743-4 5-147742-4 5-147724-4 5-147730-4 5-147731-4
7.900 [22.86] .600 [15.24] See note 3 .800 [20.32] 5-147744-5 5-147743-5 5-147742-5 5-147724-5 5-147730-5 5-147731-5
81.000 [25.40] .700 [17.78] See note 3 .900 [22.86] 5-147744-6 5-147743-6 5-147742-6 5-147724-6 5-147730-6 5-147731-6
91.100 [27.94] .800 [20.32] See note 3 1.000 [25.40] 5-147744-7 5-147743-7 5-147742-7 5-147724-7 5-147730-7 5-147731-7
10 1.200 [30.48] .900 [22.86] See note 3 1.100 [27.94] 5-147744-8 5-147743-8 5-147742-8 5-147724-8 5-147730-8 5-147731-8
11 1.300 [33.02] 1.000 [25.40] See note 3 1.200 [30.48] 5-147744-9 5-147743-9 5-147742-9 5-147724-9 5-147730-9 5-147731-9
12 1.400 [35.56] 1.100 [27.94] See note 3 1.300 [33.02] 6-147744-0 6-147743-0 6-147742-0 6-147724-0 6-147730-0 6-147731-0
13 1.500 [38.10] 1.200 [30.48] See note 3 1.400 [35.56] 6-147744-1 6-147743-1 6-147742-1 6-147724-1 6-147730-1 6-147731-1
14 1.600 [40.64] 1.300 [33.02] See note 3 1.500 [38.10] 6-147744-2 6-147743-2 6-147742-2 6-147724-2 6-147730-2 6-147731-2
15 1.700 [43.18] 1.400 [35.56] See note 3 1.600 [40.64] 6-147744-3 6-147743-3 6-147742-3 6-147724-3 6-147730-3 6-147731-3
16 1.800 [45.72] 1.500 [38.10] See note 3 1.700 [43.18] 6-147744-4 6-147743-4 6-147742-4 6-147724-4 6-147730-4 6-147731-4
17 1.900 [48.26] 1.600 [40.64] See note 3 1.800 [45.72] 6-147744-5 6-147743-5 6-147742-5 6-147724-5 6-147730-5 6-147731-5
18 2.000 [50.80] 1.700 [43.18] See note 3 1.900 [48.26] 6-147744-6 6-147743-6 6-147742-6 6-147724-6 6-147730-6 6-147731-6
19 2.100 [53.34] 1.800 [45.72] See note 3 2.000 [50.80] 6-147744-7 6-147743-7 6-147742-7 6-147724-7 6-147730-7 6-147731-7
20 2.200 [55.88] 1.900 [48.26] See note 3 2.100 [53.34] 6-147744-8 6-147743-8 6-147742-8 6-147724-8 6-147730-8 6-147731-8
30 3.200 [81.28] 2.900 [73.66] See note 3 3.100 [78.74] 7-147744-8 7-147743-8 7-147742-8 7-147724-8 7-147730-8 7-147731-8
40 4.300 [109.22] 4.100 [104.14] 2.100 [53.34] 4.200 [106.68] 8-147744-8 8-147743-8 8-147742-8 8-147724-8 8-147730-8 8-147731-8
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension, and
.062 [1.57] for recommended board thickness if used in bottom entry application
3. No center hold down.
.042±.003
[1.07±0.08] Dia.
.042±.003
[1.07±0.08] Dia.
Standoffs
Ty p .
188
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Receptacle Assemblies, Single-Row, Surface Mount, .100 [2.54] x
.100 [2.54] Centerline End To End Stackable without Compliant Pin Holddowns
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Surface Mount Receptacle
Assemblies
5
Surface Mount,Single-Row,
Dual Entry, End to End
Stackable
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
as follows:
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to Mating Post Selection Guide —
page 90
Performance Specifications —
page 186
Packaged in Tubes Packaged in Tape & Reel
No. of Dimensions Contact Plating/ Part Nos. Contact Plating/ Part Nos.
Pos. AB
Plating A Plating B Plating C Plating A Plating B Plating C
3.300 [7.62] .200 [5.08] 5-147738-2 5-147737-2 5-147736-2 5-147723-2 5-147728-2 5-147729-2
4.400 [10.16] .300 [7.62] 5-147738-3 5-147737-3 5-147736-3 5-147723-3 5-147728-3 5-147729-3
5.500 [12.70] .400 [10.16] 5-147738-4 5-147737-4 5-147736-4 5-147723-4 5-147728-4 5-147729-4
6.600 [15.24] .500 [12.70] 5-147738-5 5-147737-5 5-147736-5 5-147723-5 5-147728-5 5-147729-5
7.700 [17.78] .600 [15.24] 5-147738-6 5-147737-6 5-147736-6 5-147723-6 5-147728-6 5-147729-6
8.800 [20.32] .700 [17.78] 5-147738-7 5-147737-7 5-147736-7 5-147723-7 5-147728-7 5-147729-7
9.900 [22.86]] .800 [20.32] 5-147738-8 5-147737-8 5-147736-8 5-147723-8 5-147728-8 5-147729-8
10 1.000 [25.40] .900 [22.86] 5-147738-9 5-147737-9 5-147736-9 5-147723-9 5-147728-9 5-147729-9
11 1.100 [27.94] 1.000 [25.40] 6-147738-0 6-147737-0 6-147736-0 6-147723-0 6-147728-0 6-147729-0
12 1.200 [30.48] 1.100 [27.94] 6-147738-1 6-147737-1 6-147736-1 6-147723-1 6-147728-1 6-147729-1
13 1.300 [33.02] 1.200 [30.48] 6-147738-2 6-147737-2 6-147736-2 6-147723-2 6-147728-2 6-147729-2
14 1.400 [35.56] 1.300 [33.02] 6-147738-3 6-147737-3 6-147736-3 6-147723-3 6-147728-3 6-147729-3
15 1.500 [38.10] 1.400 [35.56] 6-147738-4 6-147737-4 6-147736-4 6-147723-4 6-147728-4 6-147729-4
16 1.600 [40.64] 1.500 [38.10] 6-147738-5 6-147737-5 6-147736-5 6-147723-5 6-147728-5 6-147729-5
17 1.700 [43.18] 1.600 [40.64] 6-147738-6 6-147737-6 6-147736-6 6-147723-6 6-147728-6 6-147729-6
18 1.800 [45.72] 1.700 [43.18] 6-147738-7 6-147737-7 6-147736-7 6-147723-7 6-147728-7 6-147729-7
19 1.900 [48.26] 1.800 [45.72] 6-147738-8 6-147737-8 6-147736-8 6-147723-8 6-147728-8 6-147729-8
20 2.000 [50.80] 1.900 [48.26] 6-147738-9 6-147737-9 6-147736-9 6-147723-9 6-147728-9 6-147729-9
30 3.000 [76.20] 2.900 [73.66] 7-147738-9 7-147737-9 7-147736-9 7-147723-9 7-147728-9 7-147729-9
40 4.000 [101.60] 3.900 [99.06] 8-147738-9 8-147737-9 8-147736-9 8-147723-9 8-147728-9 8-147729-9
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in bottom entry application.
A
B
.265
[6.73]
.100
[2.54]
.228
[5.78]
.020
[0.51] Standoff Typ.
.060
[1.52] Min. .090
[2.28]
.148
[3.77]
.208
[5.28] Max.
.107
[2.72]
Ty p .
.100
[2.54] Ty p .
.140
[3.56]
.040±.003
[1.02±0.08] Dia. Typ.
Recommended PC Board Pad Pattern
(.008 [0.20] thick stencil)
(For bottom entry or pass
through applications)
(Localized Gold
Plate Area)
Point of
Contact
189
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Surface Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centers
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Surface Mount Receptacle
Assemblies
5
Surface Mount,Double Row,
Dual Entry with Holddowns
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to Mating Post Selection Guide —
page 90
Performance Specifications —
page 186
Technical Documents
— page 276
Product Specification
108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult Tyco Electronics.
.100
[2.54]
Ty p .
.050
[1.27]
Ty p .
.198
[5.03]
A
.020
[0.51]
Ty p .
.265
[6.73]
Ty p .
.083
[2.12]
Ty p .
.266
[6.75]
.107
[2.72]
Ty p .
.148
[3.76]
Ty p .
B
D
C
.110
[2.79]
Ty p . .238
[6.05]
Ty p .
.100
[2.54]
Ty p .
.075
[1.91]
Ty p .
.090
[2.29]
Ty p .
.040±.003
[1.02±0.08]
.040±.003
[1.02±0.08]
.004
[0.10]
Ty p .
.027±.002
[0.69±0.05] Ty p .
.060
[1.52]
Ty p .
.040
[1.02]
Ty p .
.100
[2.54] Ty p .
Recommended PC Board Layout
(.008 [0.20] thick stencil)
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
(For bottom entry or
pass thru applications)
(Localized Gold
Plate Area)
Point of
Contact
190
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Surface Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centers (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Surface Mount Receptacle
Assemblies
5
Packaged in Tubes Packaged in Tape and Reel
No. of Dimensions Contact Plating/Part Nos. Contact Plating/Part Nos.
Pos. A BCD
Plating A Plating B Plating C Plating A Plating B Plating C
10 .700 [17.78] .400 [10.16] .600 [15.24] See Note 1 5-147102-5 5-147101-5 5-147103-5 5-147747-5 5-147746-5 5-147745-5
14 .900 [22.86] .600 [15.24] .800 [20.32] See Note 1 5-147102-7 5-147101-7 5-147103-7 5-147747-7 5-147746-7 5-147745-7
20 1.200 [30.48] .900 [22.86] 1.100 [27.94] See Note 1 6-147102-0 6-147101-0 6-147103-0 6-147747-0 6-147746-0 6-147745-0
22 1.300 [33.02] 1.000 [25.40] 1.200 [30.48] See Note 1 6-147102-1 6-147101-1 6-147103-1 6-147747-1 6-147746-1 6-147745-1
26 1.500 [38.10] 1.200 [30.48] 1.400 [35.56] See Note 1 6-147102-3 6-147101-3 6-147103-3 6-147747-3 6-147746-3 6-147745-3
30 1.700 [43.18] 1.400 [35.56] 1.600 [40.64] See Note 1 6-147102-5 6-147101-5 6-147103-5 6-147747-5 6-147746-5 6-147745-5
34 1.900 [48.26] 1.600 [40.64] 1.800 [45.72] See Note 1 6-147102-7 6-147101-7 6-147103-7 6-147747-7 6-147746-7 6-147745-7
36 2.000 [50.08] 1.700 [43.18] 1.900 [48.26] See Note 1 6-147102-8 6-147101-8 6-147103-8 6-147747-8 6-147746-8 6-147745-8
40 2.200 [55.88] 1.900 [48.26] 2.100 [53.34] See Note 1 7-147102-0 7-147101-0 7-147103-0 7-147747-0 7-147746-0 7-147745-0
46 2.500 [63.50] 2.200 [55.88] 2.400 [60.96] See Note 1 7-147102-3 7-147101-3 7-147103-3 7-147747-3 7-147746-3 7-147745-3
50 2.700 [68.58] 2.400 [60.96] 2.600 [66.04] See Note 1 7-147102-5 7-147101-5 7-147103-5 7-147747-5 7-147746-5 7-147745-5
62 3.300 [83.82] 3.000 [76.20] 3.200 [81.28] See Note 1 8-147102-1 8-147101-1 8-147103-1 8-147747-1 8-147746-1 8-147745-1
64 3.400 [86.36] 3.100 [78.74] 3.300 [83.82] See Note 1 8-147102-2 8-147101-2 8-147103-2 8-147747-2 8-147746-2 8-147745-2
66 3.500 [88.90] 3.200 [81.28] 3.400 [86.36] See Note 1 8-147102-3 8-147101-3 8-147103-3 8-147747-3 8-147746-3 8-147745-3
70 3.700 [95.98] 3.400 [86.36] 3.600 [91.44] See Note 1 8-147102-5 8-147101-5 8-147103-5 8-147747-5 8-147746-5 8-147745-5
80 4.300 [109.22] 3.900 [99.06] 4.200 [106.68] 2.100 [53.34] 9-147102-0 9-147101-0 9-147103-0 9-147747-0 9-147746-0 9-147745-0
Notes: 1. No center holddown.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension and
.062 [1.57] for recommended board thickness in bottom entry applications.
191
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Surface Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Surface Mount Receptacle
Assemblies
5
Surface Mount,Double Row,
Dual Entry
End to End Stackable
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] tin-lead over
.000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to Mating Post Selection Guide —
page 90
Performance Specifications —
page 186
Technical Documents
— page 276
Product Specification
108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult Tyco Electronics.
.050
[1.27]
Max.
.265
[6.73]
Ty p .
A
.027±.002
[0.69±0.05] Ty p .
.020
[0.51]
Ty p .
.060
[1.52] Ty p .
.100
[2.54] Ty p .
.100
[2.54] Ty p .
.238
[6.05]
Ty p .
.100
[2.54]
Ty p .
.266
[6.75]
.198±.002
[5.03±0.05]
.090
[2.29]
.148
[3.76] .107
[2.72]
B
.040
[1.02] Ty p .
.100
[2.54]
Ty p .
.004
[0.10]
Ty p .
Recommended PC Board Pad Layout
(.008 [0.20] thick stencil)
(for Bottom Entry and Pass Through applications)
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
(Localized Gold
Plate Area)
Point of
Contact
192
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Surface Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Surface Mount Receptacle
Assemblies
5
Packaged in Tubes Packaged in Tape & Reel
No. of Dimensions Contact Plating/ Part Nos. Contact Plating/ Part Nos.
Pos. AB
Plating A Plating B Plating C Plating A Plating B Plating C
10 .500 [12.70] .400 [10.16] 5-147741-5 5-147740-5 5-147739-5 5-147105-5 5-147104-5 5-147106-5
14 .700 [17.78] .600 [15.24] 5-147741-7 5-147740-7 5-147739-7 5-147105-7 5-147104-7 5-147106-7
20 1.000 [25.40] .900 [22.86] 6-147741-0 6-147740-0 6-147739-0 6-147105-0 6-147104-0 6-147106-0
22 1.100 [27.94] 1.000 [25.40] 6-147741-1 6-147740-1 6-147739-1 6-147105-1 6-147104-1 6-147106-1
26 1.300 [33.02] 1.200 [30.48] 6-147741-3 6-147740-3 6-147739-3 6-147105-3 6-147104-3 6-147106-3
30 1.500 [38.10] 1.400 [35.56] 6-147741-5 6-147740-5 6-147739-5 6-147105-5 6-147104-5 6-147106-5
34 1.700 [43.18] 1.600 [40.64] 6-147741-7 6-147740-7 6-147739-7 6-147105-7 6-147104-7 6-147106-7
36 1.800 [45.72] 1.700 [43.18] 6-147741-8 6-147740-8 6-147739-8 6-147105-8 6-147104-8 6-147106-8
40 2.000 [50.80] 1.900 [48.26] 7-147741-0 7-147740-0 7-147739-0 7-147105-0 7-147104-0 7-147106-0
46 2.300 [58.42] 2.200 [55.88] 7-147741-3 7-147740-3 7-147739-3 7-147105-3 7-147104-3 7-147106-3
50 2.500 [63.50] 2.400 [60.96] 7-147741-5 7-147740-5 7-147739-5 7-147105-5 7-147104-5 7-147106-5
62 3.100 [78.74] 3.000 [76.20] 8-147741-1 8-147740-1 8-147739-1 8-147105-1 8-147104-1 8-147106-1
64 3.200 [81.28] 3.100 [78.74] 8-147741-2 8-147740-2 8-147739-2 8-147105-2 8-147104-2 8-147106-2
66 3.300 [83.82] 3.200 [81.28] 8-147741-3 8-147740-3 8-147739-3 8-147105-3 8-147104-3 8-147106-3
70 3.500 [88.90] 3.400 [86.36] 8-147741-5 8-147740-5 8-147739-5 8-147105-5 8-147104-5 8-147106-5
80 4.000 [101.60] 3.900 [99.06] 9-147741-0 9-147740-0 9-147739-0 9-147105-0 9-147104-0 9-147106-0
Notes: 1. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension and
.062 [1.57] for recommended board thickness in bottom entry applications.
193
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Two-Piece Printed Circuit Board Connectors
AMPMODU Interconnection System
Note: All part numbers are RoHS
compliant.
Printed Circuit Board
Connectors
5
Product Facts
■Two-Piece reliability
■Two- and three-row systems
available
■Short signal path for VLSI
applications
■Receptacles employ dual
cantilever beams and built-
in anti-overstress to provide
reliable connections
■Built-in guides provide
alignment before contact
engagement
■Closed entry receptacle
housings provide lead-in
ramp for positive mating of
contacts
■Shrouded headers provide
full pin protection
■Polarized headers
■Vertical headers available
with ACTION PIN posts or
.025 [0.64] square solder
posts
■Repairable ACTION PIN
posts
■Simple seating tooling for
headers with ACTION PIN
posts
■Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
3-Row Header
5-103264-3
ACTION PIN Posts Solder Posts
Receptacle Contact
(Double Beam with Anti-Overstress)
Board Retention Feature Available
Double-Row
Make First/Break
Last Header
(Part Nos. available
upon request)
3-Row Closed Entry
Receptacle 5-534974-8
5-102690-3
Vertical Header
with ACTION PIN
Posts
5-534972-2 Vertical
Receptacle
5-532956-3 Horizontal
Receptacle
5-532956-3 Horizontal
Receptacle
6-102589-2 3/4 Shroud,
Right Angle Header For drawings, technical data or samples,
contact your Tyco Electronics sales engi-
neer or call the Tyco Electronics Product
Information Center: 1-800-522-6752
R
R
194
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Two-Piece Printed Circuit Board Connectors (Continued)
AMPMODU Interconnection System
Printed Circuit Board
Connectors
5
Temperature Rating —
Headers and Receptacles —
–65°C to +125°C (black thermoplastic
housings, 94V-0 rated)
Durability (Tested to) — 200 cycles
for .000030 [0.00076] gold plating;
75 cycles for .000015 [0.00038] gold
plating
Mating Force — 8 oz. [2.22N]
maximum per contact
Unmating Force — .75 oz. [0.2N]
minimum per contact during third
mating cycle
Performance Specifications
Current Rating —
3 amperes max. for single contact;
2 amperes max. per contact for fully
energized connector
Voltage Rating — 250 VAC
Dielectric Rating — 750 VAC rms
between contacts for one minute
Termination Resistance —
12 milliohms max. at 100 milliamperes
test current, and 50 millivolts open cir-
cuit voltage
Insulation Resistance — 1000
megohms after temperature/humidity
cycling
AMPMODU Two-Piece
Printed Circuit Board
connectors are designed
to reliably and economically
meet the packaging and
interconnection requirements
of today’s sophisticated
electronics.
The double row system is
produced in 10 thru 200
positions in the vertical
headers and horizontal
receptacles, and 10 thru
160 positions in the right
angle headers and vertical
receptacles.
The AMPMODU three-row
connector system is
produced in 30 through 300
positions (straight post
headers and mating
horizontal receptacles).
Both two- and three-row
vertical headers are
available with press-fit
ACTION PIN posts or
standard .025 [0.64] square
solder posts. There is a
simple seating tool for
headers with ACTION PIN
posts.
A board retention feature
is offered in the two-row
horizontal receptacles,
two-row right angle headers
and two- and three-row
vertical headers. Built-in
guides assure accurate
header and receptacle
alignment before contact
engagement.
Closed entry receptacle
housings provide a lead-in
ramp for positive mating of
contacts.
195
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Receptacle Assemblies, Board Mount, Double-Row,
Closed Entry, .100 x .100 [2.54 x 2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
5
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050-
.000100 [0.00127-0.00254] matte tin on
solder area, with entire contact under-
plated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000050-.000100 [0.00127-0.00254]
matte tin on solder area, with entire con-
tact underplated .000050 [0.00127]
nickel
Related Product Data
Mateable Headers — pages 198, 199
Performance Specifications —
page 194
Technical Documents
— page 276
Product Specification
108-25017
Application Specification
114-9009
Additional receptacle assembly
sizes and solder tail lengths
are available; minimum order
quantities may apply. Consult
Tyco Electronics.
Receptacle Assembly Part Nos. Receptacle Assembly Part Nos.
No. of Dimensions with .115 [2.92] Solder Tail Lengths with .145 [3.68] Solder Tail Lengths
Pos. AB Standard Solder Tails Board Retention Tails Standard Solder Tails
Plating A Plating B Plating A Plating B Plating A
12 .858 [21.79] .500 [12.70] 5-532956-1 5-532955-1 5-534204-2 5-534975-5 5-533009-1
14 .958 [24.33] .600 [15.24] — 7-532955-5 — — —
16 1.058 [26.87] .700 [17.78] 5-532956-2 — 6-534204-0 6-534975-5 —
20 1.258 [31.95] .900 [22.86] 5-532956-3 5-532955-3 5-534204-9 5-534975-6 —
24 1.458 [37.03] 1.100 [27.94] 5-532956-4 5-532955-4 6-534204-1 5-534975-7 —
30 1.758 [44.65] 1.400 [35.56] 5-532956-5 5-532955-5 5-534204-4 5-534975-8 5-533009-5
36 2.058 [52.27] 1.700 [43.18] 5-532956-6 5-532955-6 5-534204-3 5-534975-9 —
40 2.258 [57.35] 1.900 [48.26] 5-532956-7 5-532955-7 6-534204-2 6-534975-0 —
50 2.758 [70.05] 2.400 [60.96] 5-532956-8 5-532955-8 5-534204-1 6-534975-1 5-533009-8
60 3.258 [82.75] 2.900 [73.66] 5-532956-9 5-532955-9 5-534204-5 6-534975-2 5-533009-9
70 3.758 [95.45] 3.400 [86.36] 6-532956-0 6-532955-0 6-534204-3 6-534975-3 6-533009-0
72 3.858 [97.99] 3.500 [88.90] 6-532956-1 6-532955-1 6-534204-4 — —
80 4.258 [108.15] 3.900 [99.06] 6-532956-2 6-532955-2 5-534204-8 6-534975-4 6-533009-2
86 4.558 [115.77] 4.200 [106.68] 6-532956-3 6-532955-3 — — 6-533009-3
90 4.758 [120.85] 4.400 [111.76] 6-532956-4 6-532955-4 — — —
96 5.058 [128.47] 4.700 [119.38] 6-532956-5 6-532955-5 6-534204-5 — 6-533009-5
100 5.258 [133.55] 4.900 [124.46] 6-532956-6 6-532955-6 5-534204-6 5-534975-1 6-533009-6
110 5.758 [146.25] 5.400 [137.16] 6-532956-7 6-532955-7 6-534204-6 — —
120 6.258 [158.95] 5.900 [149.86] 6-532956-8 6-532955-8 5-534204-7 5-534975-2 6-533009-8
130 6.758 [171.65] 6.400 [162.56] 7-532956-0 7-532955-0 6-534204-7 — —
200 10.258 [260.55] 9.900 [251.46] 7-532956-3 7-532955-3 7-534204-0 5-534975-4 —
Notes: 1. .115 [2.92] tail length is for use with .062 [1.57] PC boards; .145 [3.68] tail length is for use with .093 [2.36] PC boards.
Notes: 2. Receptacle assemblies with low force contacts are available, consult Tyco Electronics.
3. .256 [6.50] minimum positive pin stop to prevent shorting between rows.
.320
[8.13]
.144
[3.66] Dia.
(2 Plc.)
.179
[4.55]
Ty p .
.100
[2.54]
.125
[3.17]
(Localized
Gold Plate Area)
.256
[6.50]
(See Note 3.)
.115
[2.92]
(See Note 2)
.238
[6.05]
C
LC
L
.310±.010
[7.88±0.25]
.065±.005
[1.65±0.13]
to
.100±.005
[2.54±0.13]
.310±.002
[7.87±0.05]
.035±.003
[0.89±0.08] Typ. Dia.
(Finished Hole)
.100±.003
[2.54±0.08]
.069
[1.75]
.115 or .145
[2.92 or 3.68]
(See Note 1)
.115 or .145
[2.92 or 3.68]
(See Note 2)
A
B
Standard Solder Tails
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Board Retention Tails
Tolerances not to accumulate within
one connector pattern.
Material — Natural color nylon
Keying Plug
Min.
.174
[4.42]
(Point of Contact)
Max.
Part No. 86286-1
(Plugs into receptacle contact)
Horizontal Mount (with Guide
Pin Slots and Standoffs)
196
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Receptacle Assemblies, Board Mount, Double-Row,
Closed Entry, .100 x .100 [2.54 x 2.54] Centerline (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
5
Vertical Mount
(with Guide Pin Slots and
Standoffs)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, duplex
plated .000030 [0.00076] gold on
contact area, .000050-.000100
[0.00127-0.00254] matte tin on solder
area, with entire contact underplated
.000050 [0.00127] nickel
Related Product Data
Mateable Headers — pages 198, 199
Performance Specifications —
page 194
Technical Documents
— page 276
Product Specification
108-25017
Application Specification
114-9009
Additional receptacle assembly
sizes and solder tail lengths
are available; minimum order
quantities may apply. Consult
Tyco Electronics.
.115
[2.92]
.129
[3.28] Ty p .
.320
[8.13]
.410
[10.41]
.238
[6.05]
.100
[2.54] Ty p .
.179
[4.55] Ty p .
.125
[3.18]
(Localized
Gold Plate Area)
.100
[2.54]
.100
[2.54]
.144
[3.68]
Dia.
.069
[1.75]
Ty p .
A
B±.008
[±0.20]
.100±.003
[2.54±0.08]
.100±.003
[2.54±0.08]
.035±.003
[0.89±0.08] Typ. Dia.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Tolerances not to accumulate within one
connector pattern.
Keying Plug
No. of Dimensions Receptacle Assembly
Pos. AB Part Nos.
30 1.758 [44.65] 1.400 [35.56] 5-534972-1
40 2.258 [57.35] 1.900 [48.26] 5-534972-2
50 2.758 [70.05] 2.400 [60.96] 5-534972-3
60 3.258 [82.75] 2.900 [73.66] 5-534972-4
70 3.758 [95.45] 3.400 [86.36] 5-534972-5
80 4.258 [108.15] 3.900 [99.06] 5-534972-6
90 4.758 [120.85] 4.400 [111.76] 5-534972-7
100 5.258 [133.55] 4.900 [124.46] 5-534972-8
120 6.258 [158.95] 5.900 [149.86] 6-534972-0
Material — Natural color nylon
Part No. 86286-1
(Plugs into receptacle contact)
197
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Receptacle Assemblies, Board Mount, Triple-Row,
Closed Entry, .100 x .100 [2.54 x 2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
5
Horizontal Mount
(with Guide Pin Slots and
Standoffs)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
.000030 [0.00076] gold in mating area,
.000050-.000100 [0.00127-0.00254]
matte tin on solder area, with entire
contact underplated .000050 [0.00127]
nickel
Related Product Data
Mateable Headers — page 201
Performance Specifications —
page 194
Technical Documents
— page 276
Product Specification
108-25017
Application Specification
114-9009
Additional receptacle assembly
sizes and solder tail lengths
are available; minimum order
quantities may apply. Consult
Tyco Electronics.
.410
[10.41]
.145
[3.68]
.145
[3.68]
.125
[3.18]
(Localized
Gold Plate Area)
.115
[2.92]
.115
[2.92]
.400
[10.16]
.400
[10.16]
.100
[2.54]
.100
[2.54]
.069
[1.75]
.338
[8.59]
.144
[3.66]
Dia.
Ty p .
.100
[2.54] Ty p .
.179
[4.55] Ty p .
.300
[7.62]
.300
[7.62]
B
A
.035±.003
[0.89±0.08] Typ. Dia.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Tail Length
Tolerances not to accumulate within one
connector pattern.
Keying Plug
No. of Dimensions Receptacle Assembly Part Nos.
Pos. A B Plating A
72 2.658 [67.51] 2.300 [58.42] 5-534974-3
93 3.358 [85.29] 3.000 [76.20] 15-534974-4
96 3.458 [87.83] 3.100 [78.74] 1-5-534974-5
150 5.258 [133.55] 4.900 [124.46] 1-5-534974-8
210 7.258 [184.35] 6.900 [175.26] 6-534974-1
.065±.005
[1.65±0.13]
Material — Natural color nylon
Part No. 86286-1
(Plugs into receptacle contact)
.100±.003
[2.54±0.08]
198
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Headers, Straight Post, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
5
Solder Posts and
ACTION PIN Posts
(with Pin Protection
and Guide Pins)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Plating C — Selectively plated .000030
[0.00076] gold on contact area and
.000015 [0.00038] gold on termination
end, with gold flash over .000050
[0.00127] nickel on entire post
Related Product Data
Mateable Receptacles —
pages 195, 196
Performance Specifications —
page 194
ACTION PIN Posts —pages 150, 151
Application Tooling —pages 152
Technical Documents
— page 276
Product Specification
108-25017
Application Specification
114-9009
Additional header sizes are
available; minimum order
quantities may apply. Consult
Tyco Electronics.
.085
[2.16]
.065
[1.66] R
(2 Plc.)
.130
[3.30]
(2 Plc.)
.040
[1.02]
(4 Sides)
.100
[2.54]
Pos.
Ref.
Board Retention Tails
(where indicated)
.515
[13.08]
.040±.003
[1.02±0.08]
(Finished Hole)
.0453±.001
[1.02±0.03]
(Drilled Hole)
.200
[5.08]
.110
[2.79]
.440
[11.18]
.130
[3.30]
.320
[8.13]
.180
[4.57]
.090
[2.29]
.200
[5.08]
(Localized
Gold Plate
Area)
A
B
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Tolerances not to accumulate within one connector pattern.
Header Part Nos. with .180 [4.57] Tail Length
No. of Dimensions Standard Solder Tails Board Retention Tails
Pos. AB
Plating A Plating B Plating A Plating B
12 .980 [24.89] .500 [12.70] 5-102692-1 5-102567-1 6-534978-6 5-534257-5
14 1.080 [27.43] .600 [15.24] — 7-102567-3 — —
16 1.180 [29.97] .700 [17.78] 6-102692-5 — 5-534978-2 6-534257-4
20 1.380 [35.05] .900 [22.86] 6-102692-6 6-102567-1 5-534978-3 5-534257-6
24 1.580 [40.13] 1.100 [27.94] 5-102692-2 5-102567-2 5-534978-4 5-534257-7
30 1.880 [47.75] 1.400 [35.56] 6-102692-7 6-102567-3 5-534978-5 5-534257-8
36 2.180 [55.37] 1.700 [43.18] 5-102692-3 5-102567-3 5-534978-6 5-534257-9
40 2.380 [60.45] 1.900 [48.26] 6-102692-3 6-102567-2 5-534978-7 6-534257-0
50 2.880 [73.15] 2.400 [60.96] 5-102692-4 5-102567-6 5-534978-8 6-534257-5
60 3.380 [85.85] 2.900 [73.66] 5-102692-5 5-102567-4 5-534978-9 6-534257-1
70 3.880 [98.55] 3.400 [86.36] 6-102692-4 6-102567-0 6-534978-5 6-534257-2
72 3.980 [101.09] 3.500 [88.90] 6-102692-8 6-102567-6 6-534978-0 —
80 4.380 [111.25] 3.900 [99.06] 5-102692-6 5-102567-8 6-534978-1 5-534257-1
86 4.680 [118.87] 4.200 [106.68] 6-102692-9 6-102567-7 — —
90 4.880 [123.95] 4.400 [111.76] 6-102692-2 6-102567-4 — —
96 5.180 [131.57] 4.700 [119.38] 5-102692-7 5-102567-5 6-534978-7 —
100 5.380 [136.65] 4.900 [124.46] 5-102692-8 5-102567-9 6-534978-8 5-534257-2
110 5.880 [149.35] 5.400 [137.16] 6-102692-0 6-102567-5 6-534978-2 —
120 6.380 [162.05] 5.900 [149.86] 5-102692-9 5-102567-7 6-534978-3 5-534257-3
130 6.880 [174.75] 6.400 [162.56] 7-102692-0 6-102567-9 6-534978-9 —
200 10.380 [263.65] 9.900 [251.46] 6-102692-1 7-102567-1 5-534978-1 6-534257-9
Note: Headers with make first/break last posts can be made available, consult Tyco Electronics.
.025 [0.64] Square
Board Retention Tails
.180
[4.57]
.100±.003
[2.54±0.08]
1 2 3
.100±.003
[2.54±0.08]
199
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Headers, Straight Post, Double-Row, .100 x .100 [2.54 x 2.54]
Centerline (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
5
See chart
below
.025 [0.64] Square
ACTION PIN Tails
Header Part Nos. with ACTION PIN Posts
No. of Dimensions .250 [6.35] Tail Length .480 [12.19] Tail Length .680 [17.27] Tail Length
Pos. AB
Plating A Plating B Plating A Plating C Plating C
12 .980 [24.89] .500 [12.70] 5-102690-1 5-103291-4 — — —
14 1.080 [27.43] .600 [15.24] — 5-103291-3 — — —
20 1.380 [35.05] .900 [22.86] 6-102690-3 5-103291-6 — — —
24 1.580 [40.13] 1.100 [27.94] 5-102690-2 5-103291-7 — — —
36 2.180 [55.37] 1.700 [43.18] 5-102690-3 5-103291-9 — — —
40 2.380 [60.45] 1.900 [48.26] 6-102690-6 5-103291-2 — — —
50 2.880 [73.15] 2.400 [60.96] 5-102690-4 6-103291-0 — — —
60 3.380 [85.85] 2.900 [73.66] 5-102690-5 6-103291-1 — — —
70 3.880 [98.55] 3.400 [86.36] 6-102690-7 6-103291-2 — — —
80 4.380 [111.25] 3.900 [99.06] 5-102690-6 6-103291-4 — — —
90 4.880 [123.95] 4.400 [111.76] 6-102690-1 6-103291-6 — — —
96 5.180[131.57] 4.700 [119.38] 5-102690-7 6-103291-8 — — —
100 5.380 [136.65] 4.900 [124.46] 5-102690-8 6-103291-9 — — 102777-3
120 6.380 [162.05] 5.900 [149.86] 5-102690-9 7-103291-1 5-102691-9 1-102666-1 102777-1
130 6.880 [174.75] 6.400 [162.56] — — — 102666-9 —
Notes: 1. Other header sizes can be made available upon request.
Headers with ACTION PIN posts are for use with .093 [2.36] nominal or thicker PC boards.
2. Application tooling for installing headers with ACTION PIN posts is shown on pages 152 and 153.
3. Headers with .250 [6.35] tail length can be made available with make first/break last contacts,
consult Tyco Electronics.
4. Plated through holes to be prepared per recommendations found on page 151.
200
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Headers, Right-Angle Post, Double-Row, .100 x .100 [2.54 x 2.54]
Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
5
Card Extender
(with Pin Protection
and Guide Pins)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Related Product Data
Mateable Receptacles —
pages 195, 196
Performance Specifications —
page 194
Technical Documents
— page 276
Product Specification
108-25017
Application Specification
114-9009
Additional header sizes are
available; minimum order
quantities may apply. Consult
Tyco Electronics.
.065
[1.65] R
(2 Plc.)
.040
[1.02]
Ty p .
.200
[5.08]
Ty p . .185
[4.70]
Ty p .
.100
[2.54]
Pos.
Ref.
Board Retention Tails
(where indicated)
.599
[15.21]
.762
[19.35] Max.
.035±.003
[0.89±0.08] Dia. Typ.
(Standard
Finished Hole)
.157
[3.99]
.157
[3.99]
.320
[8.13]
.320
[8.13]
.100
[2.54]
.125
[3.18]
.125
[3.18]
.100
[2.54]
(Localized
Gold Plate
Area)
.040±.003
[1.02±0.08]
(Finished
Hole
w/Bd. Ret.)
A
B
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Tolerances not to accumulate within one
connector pattern.
.025 [0.64] Square
Board Retention Tails
.100±.003
[2.54±0.08]
Header Part Nos. with .125 [3.18] Tail Length
No. of Dimensions Standard Solder Tails Board Retention Tails
Pos. AB
Plating A Plating B Plating A
12 .980 [24.89] .500 [12.70] 6-102802-2 5-102589-8 5-534245-5
16 1.180 [29.97] .700 [17.78] 6-102802-4 — 5-534245-4
20 1.380 [35.05] .900 [22.86] 6-102802-5 6-102589-2 5-534245-6
24 1.580 [40.13] 1.100 [27.94] 6-102802-3 5-102589-6 5-534245-7
30 1.880 [47.75] 1.400 [35.56] 6-102802-6 5-102589-4 5-534245-2
36 2.180 [55.37] 1.700 [43.18] 5-102802-3 5-102589-2 5-534245-8
40 2.380 [60.45] 1.900 [48.26] 5-102802-8 6-102589-3 —
50 2.880 [73.15] 2.400 [60.96] 5-102802-4 5-102589-5 5-534245-1
60 3.380 [85.85] 2.900 [73.66] 5-102802-9 5-102589-7 —
72 3.980 [101.09] 3.500 [88.90] 6-102802-7 6-102589-7 —
80 4.380 [111.25] 3.900 [99.06] 5-102802-5 5-102589-1 6-534245-0
90 4.880 [123.95] 4.400 [111.76] 6-102802-0 6-102589-4 —
100 5.380 [136.65] 4.900 [124.46] 5-102802-6 5-102589-3 6-534245-1
120 6.380 [162.05] 5.900 [149.86] 5-102802-2 6-102589-1 5-534245-3
130 6.880 [174.75] 6.400 [162.56] 6-102802-9 6-102589-9 6-534245-3
Note: Headers with make first/break last posts can be made available, consult Tyco Electronics.
2 3 4
.100±.003
[2.54±0.08]
201
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Headers, Straight Post, Triple-Row, .100 x .100 [2.54 x 2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
5
Header Part Nos.
with .180 [4.57] Tail Length
Standard Board
No. of Dimensions
Solder Tails Retention Tails
Pos. AB
Plating A Plating A
72 2.780 [70.61] 2.300 [58.42] 5-103264-1 5-534258-1
96 3.480 [88.39] 3.000 [76.20] — 5-534258-3
150 5.380 [136.65] 4.900 [124.46] 5-103264-3 —
210 7.380 [187.45] 6.900 [175.26] 5-103264-4 —
Solder Posts
(with Pin Protection
and Guide Pins)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Related Product Data
Mateable Receptacles — page 197
Performance Specifications —
page 194
Technical Documents
— page 276
Product Specification
108-25017
Application Specification
114-9009
Additional header assembly sizes
are available; minimum order
quantities may apply. Consult
Tyco Electronics.
.065
[1.65] R
(2 Plc.)
.040
[1.02]
(4 Sides)
.200
[5.08]
.200
[5.08]
(Localized
Gold Plate
Area)
.100
[2.54]
Pos.
Ref.
Board Retention Tails
(where indicated)
.615
[15.62]
.210
[5.33]
.100
[2.54]
.200
[5.08]
.440
[11.18]
.085
[2.16]
.180
[4.57]
.100
[2.54]
.0453±.001
[1.151±0.03]
(Drilled Hole)
.040±.003
[1.66±0.08]
(Finished Hole)
A
B
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Tolerances not to accumulate within one
connector pattern.
.025 [0.64] Square
Board Retention Tails
1 2 3
.320
[8.13]
.090
[2.29]
.180
[4.57]
.100±.003
[2.54±0.08]
202
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Headers, VRM (Voltage Regulator Module),
.100 x .100 [2.54 x 2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
5
No Dimensions
of AB
Header Part No.
Pos Standard Solder Tails .250 Length ACTION PIN Tails
30 2.450 [62.23] 1.400 [35.56] 5-146205-1 —
40 3.095 [78.62] 1.900 [48.26] — 5-147254-1
3.100 [78.74] 1.900 [48.26] 5-146315-1 —
Solder Posts and
ACTION PIN Posts (with
Pin Protection, Guide
Ribs, and Latching)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Posts — Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Related Product Data
Mateable Receptacles —
pages 195, 196
Performance Specifications —
page 194
ACTION PIN Posts —
page 150, 151
Application Tooling —
pages 152
Technical Documents
— page 276
Product Specification
108-25017
Application Specification
114-9009
.440
[11.18]
.515
[13.08]
.120
[3.05]
.320
[8.13]
.290
[7.37]
.040 +.003
[1.02 +.08]
.125
[3.18]
.100
[2.54] .525
[13.33]
.100
[2.54]
Housing Outline
.110
[2.79]
A
B
B
Recommended PC Board Hole Layout
203
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Accessories: End Shrouds for Machine-Applied Posts
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
5
Technical Documents
— page 276
Material — Black thermoplastic, flame
retardant
Typical Assembly
Single-Row, .100 [2.54] Centers
Part No. 102338-1
Material — Black glass-filled
polyester
Double-Row, .100 x .100 [2.54 x 2.54] Centers
Part No. 102114-1
.066
[1.68]
.290
[7.37]
.164
[4.17]
.050
[1.27]
.712
[18.08]
.059
[1.50]
Max.
.350
[8.89]
.066
[1.68] .029
[0.74]
Dia.
.405
[10.29]
.280
[7.11]
.150
[3.81]
.050
[1.27]
.890
[22.61]
.059
[1.50]
Max. .350
[8.89]
.066
[1.68]
.029
[0.74]
Dia.
Mating Polarized
Housing
End
Shroud
Board Mounted
Straight Posts
Break Line for 7 Pos.
or Larger Header
PC Board
Break Line for 14 Pos.
or Larger Header
204
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Accessories: Barrier Insert, Part No. 87743-1
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
5
Material
Black polyester
Technical Documents
— page 276
The barrier insert can be
used on double row headers
(.100 x .100 [2.54 x 2.54]
centers), including shrouded
versions—3 and 4 sides,
as well as unshrouded
straight post headers. With
one barrier insert several
configurations can be
obtained, providing headers
with capabilities of accept-
ing various combinations of
polarized and non-polarized
AMPMODU connectors.
For unshrouded headers,
the barrier insert is used
to establish polarization
and to compartmentalize
the header. For shrouded
headers, the barrier insert is
used to compartmentalize
the header, while maintaining
polarization. The barrier
insert itself is notched to
facilitate cutting off the
ends with a simple tool
such as tin snips or scissors
to achieve the desired
configuration.
Barrier Insert Cutoffs
Fig. 1
Partial Cutoff
(Left and Right Sides)
Fig. 2
Partial Cutoff
(Left Side)
Complete Cutoff
(Right Side)
Fig. 3
Complete Cutoff
(Left Side)
Partial Cutoff
(Right Side)
Fig. 4
Complete Cutoff
(Left and Right Sides)
Typical Barrier Insert Applications
For Unshrouded Double-Row, Straight Post Headers,
.100 x .100 [2.54 x 2.54] Centers
For Shrouded Double-Row, 3 and 4 Sided Headers,
.100 x .100 [2.54 x 2.54] Centers
Note: All configurations of barrier inserts compartmentalize headers and maintain polarization,
except bar (Fig. 4) configuration, which is used primarily for compartmentalizing headers.
Note: Right-angle (Figs. 2 and 3) and “T” (Fig. 1) configurations of barrier insert establish
polarization; bar (Fig. 4) configuration of barrier insert compartmentalizes header.
.446
[11.33]
.037
[0.94]
.314
[7.98] .127
[3.23]
.340
[8.64]
.030
[0.76]
45°
.030
[0.76]
.090
[2.29]
.100
[2.54]
.087
[2.21]
.047
[1.19]
.094
[2.39]
See Fig. 3 See Fig. 4 See Fig. 1 See Fig. 2
See Fig. 2 See Fig. 4 See Fig. 1 See Fig. 3
.031-.043
[0.79-1.09]
Dia. x .250[
[6.35]
Deep—
remainder
.029±.001
[0.74±0.03]
Dia.
Thru Typ. (2)
205
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Accessories: Snap-In Polarizer for Low Profile Headers
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
5
Material
Black thermoplastic, flame retardant
Part Numbers
499991-2 (Packaged 50 per bag)
499991-3 (Packaged 1000 per bag)
Related Product Data
Low Profile Headers used with —
pages 135-140
Orient the polarizer so that the
polarizer latch is on the same side
as the inner wall (post side) of the
header housing.
Slide the polarizer over the
polarizing slot of the housing until
the latch engages the hole. Snap
off the tab at the break line next to
the housing. Using the remaining
polarizer, repeat the process for the
other housing location.
The snap-in polarizer provides military polarization for low
profile headers. Installation of the polarizer is as follows:
Note: For Post Shunts, contact Tyco Electronics.
.335
[8.51]
.134
[3.40]
.335
[8.51]
.134
[3.40]
Break Line
(See below.)
Break Line
(See below.)
Break Line
Locking Clip
Contacts and Housings
5
206
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Locking Clip Contacts and Housings
AMPMODU Interconnection System
.100 x .100
[2.54 x 2.54]
Contact
Clearance
Hole
Product Facts
■Self-retaining contacts
provide permanent
connection with quick
connect and disconnect
■Fast, easy installation with
no additional locking
hardware required
■Mates with .025 [0.64]
square posts in a variety
of configurations
■Single- and double-row
configurations in up to
20 positions on .100 [2.54]
centers
■Modular design permits
end-to-end stacking
(double- row only) for
circuit grouping
■Choice of tin or select gold
plating
■Housings made of 94V-0
rated glass-filled polyester
■Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
.273/.350*
[6.93/8.89]
(with housing)
Extraction
Tool Slot
.200/.277*
[5.08/7.04]
(without
housing
PC Board
Single Row
Both Ends
Closed
(Page 208)
Single
Contact
(Page 207)
Both Ends
Closed
(for specified
no. of circuits—
housing size)
(Page 209)
Right End
Open (for
stacking to
right side)
(Page 209)
Left End
Open (for
stacking to
left side)
(Page 209)
Typical Application
*If post is longer than maximum specified, post tip may butt against wire ends.
Dimension defines .025 x .025 [0.64 x 0.64] portion of post.
Performance
Characteristics
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.) — Gold plated
contacts
16 milliohms (max.) — Tin plated
contacts
Durability — Ref. Product
Specification 108-36028 and
108-36028-1
.025
[0.64]
Sq. Posts
R
R
Locking Clip
Contacts and Housings
5
207
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Locking Clip Contacts
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Wire Crimp Contacts
with Insulation Support
Material and Finish
Contact Spring — Stainless steel
Pating A — Selectively plated
.000050 [0.00127] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Pating B — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Pating C — .000100-.000200
[0.00254-0.00508] bright tin over
.000050 [0.00127] nickel on entire
contact
Wire Harnessing
If necessary, wires can be
grouped with cable ties and
secured to a panel with
fixed clamps. However,
locking clip contacts must
be free to float within the
connector housings to
allow proper extraction.
Therefore, harnessing
hardware or the use of
multiple terminations per
contact must not restrict
the free-floating action of
contacts in the housing.
For more information
request Insulation and
Bundling Products Catalog
124132.
Extraction Tool
No. 91084-1
Fixed
Clamp
Cable
Tie
Unrestricted
Wires for
Free-Floating
Contacts
Ins. Heavy Duty Miniature
Wire Size
Dia. Dimension Part Nos. Applicator for Hand
Range
Range AFinish Strip Form Loose Piece AMP-O-LECTRIC Tool
AWG [mm2]Machine* No.
Plating B 87190-1 87191-1
30-28 0.05-0.09 .029-.039 [0.74-0.99] .550 [13.97] Plating C 5-87190-2 5-87191-2 567310-2 90295-1
Plating A 87124-3 87165-3
26-22 0.12-0.4 .038-.062 [0.97-1.57] .584 [14.83] Plating B 87124-1 87165-1 466721-2 91533-1
Plating C 5-87124-2 5-87165-2
20 0.5-0.6 .038-.062 [0.97-1.57] .584 [14.83] Plating B 867052-2 — 679996-2 90431-1
Plating C 5-867052-1 —
*For use with AMP-O-LECTRIC Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. These contacts must be crimped in accordance with Tyco Electronics Specification No. 114-25006 in order to function properly in a connector housing.
2. Extraction Tool No. 91084-1 is used for removing individual contacts from connector housings and for detaching contacts from mating posts.
Spring
Body
A
Related Product Data
Housings Used With —
pages 208, 209
Application Tooling — page 272
Technical Documents —
pages 277, 278
Product Specification
108-36028, 108-36028-1
Application Specification
114-25006
208
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Wire-Applied Housings for Locking Clip Contacts,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Locking Clip
Contacts and Housings
5
Single-Row
Material
Glass-filled polyester, 94V-0 rated
Related Product Data
Contacts — page 207
Mateable Headers and Posts —
Refer to the Mating Post Selection
Guide — page 90
Technical Documents —
pages 277, 278
Product Specification
108-36028, 108-36028-1
Application Specification
114-25006
.125 [3.18] centerline single-row,
2 and 3 position housings are
available, Base Part No. 104905.
They are designed to be stackable
end-to-end and side-by-side.
Consult Tyco Electronics.
Keying Plug
Part No. 87179-1
(Plugs directly into housings for
.025 [0.64] square post contacts)
Material — Yellow, nylon
A
C
Ty p .
B
.085
[2.16]
.100
[2.54] Ty p .
.175
[4.44]
.700
[17.78]
.025 [0.64]
Sq. Post
(Shown for
Ref. only)
.350
.273
8.89
6.93
.145
[3.68]
.060
[1.52]
[]
(Post
Length)
No. of Dimensions Housing Part No.
Pos. A B C Unstamped Stamped
1.108 [2.74] — .054 [1.37] 87175-2 —
2.216 [5.49] .100 [2.54] .058 [1.47] 87175-6 —
3.316 [8.03] .200 [5.08] .058 [1.47] 87175-8 —
4.416 [10.57] .300 [7.62] .058 [1.47] 1-87175-0 —
5.516 [13.11] .400 [10.16] .058 [1.47] 1-87175-2 —
6.616 [15.65] .500 [12.70] .058 [1.47] 1-87175-4 1-87175-3
7.716 [18.19] .600 [15.24] .058 [1.47] 1-87175-6 1-87175-5
8.816 [20.73] .700 [17.78] .058 [1.47] 1-87175-8 1-87175-7
9.916 [23.27] .800 [20.32] .058 [1.47] 2-87175-0 1-87175-9
10 1.016 [25.81] .900 [22.86] .058 [1.47] 2-87175-2 2-87175-1
11 1.116 [28.35] 1.000 [25.40] .058 [1.47] 2-87175-4 2-87175-3
12 1.216 [30.89] 1.100 [27.94] .058 [1.47] 2-87175-6 2-87175-5
13 1.316 [33.43] 1.200 [30.48] .058 [1.47] 2-87175-8 2-87175-7
14 1.416 [35.97] 1.300 [33.02] .058 [1.47] 3-87175-0 2-87175-9
15 1.516 [38.51] 1.400 [35.56] .058 [1.47] 87175-4 87175-3
Note: Housing illustrated above is the “Both Ends Closed” version.
209
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Wire-Applied Housings for Locking Clip Contacts,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Locking Clip
Contacts and Housings
5
Double-Row
Material
Glass-filled polyester, 94V-0 rated
Related Product Data
Contacts — page 207
Mateable Headers and Posts —
Refer to the Mating Post Selection
Guide — page 90
Technical Documents —
pages 277, 278
Product Specification
108-36028, 108-36028-1
Application Specification
114-25006
Keying Plug
Part No. 87179-1
(Plugs directly into housings for
.025 [0.64] square post contacts)
Material — Yellow, nylon
A
B
.350
[8.89]
(Post Length)
.100
[2.54] Ty p .
.700
[17.78]
.025 [0.64]
Sq. Post
(Shown for
Ref. only)
.300
[7.62]
Both Ends Closed
Housing No. of Dimensions Housing Part No.
Configuration Pos. A B Unstamped Stamped
2.116 [2.95] — 87176-2 —
4.216 [5.49] .100 [2.54] 87133-1 —
6.316 [8.03] .200 [5.08] 87133-7 87133-8
8.416 [10.57] .300 [7.62] 87133-9 1-87133-0
Both Ends Closed 10 .516 [13.11] .400 [10.16] 87133-2 87133-5
12 .616 [15.65] .500 [12.70] 1-87133-1 1-87133-2
16 .816 [20.73] .700 [17.78] 1-87133-3 1-87133-4
18 .916 [23.27] .800 [20.32] 1-87133-5 1-87133-6
20 1.016 [25.81] .900 [22.86] 87133-3 87133-6
4.216 [5.49] .100 [2.54] 87132-1 —
Right End Open 10 .516 [13.11] .400 [10.16] 87132-2 87132-5
20 1.016 [25.81] .900 [22.86] 87132-3 87132-6
4.216 [5.49] .100 [2.54] 87131-1 —
Left End Open 10 .516 [13.11] .400 [10.16] 87131-2 87131-5
20 1.016 [25.81] .900 [22.86] 87131-3 87131-6
Note: Housing illustrated above is the “Both Ends Closed” version.
.270
[6.86]
Max.
.100
[2.54]
.058
[1.47]
Right End Open Left End Open
Key
Keyway
210
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Wire-Applied Contacts and Housings
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod IV Wire-Applied
Contacts and Housings
5
Product Facts
■Terminates 32-20 AWG
[0.03-0.6mm2] discrete wire
■Contacts have insulation
support
■Choice of three contact
mating pressures
■Available in a variety of
gold and tin platings
■Receptacles mate with .025
[0.64] square or round posts
■Dual cantilever contact
beam with built-in
anti-overstress feature
for reliable matings
■Housings accept a variety of
receptacle and pin contacts
■Housing sizes range up to
100 positions
■Housing configurations
include single- and double-
rows on .100 [2.54]
centerlines
■Housing options include
detent latching, polarization
and bonded strain relief/
pull tabs
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
Performance
Characteristics
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.) — Beryllium
copper contacts
20 milliohms (max.) — Copper-tin-
phosphor bronze contacts
Durability — Ref. Product
Specification 108-25020
Wire-to-Board
1-87631-5 D-R Housing, Polarized with Detent
6-87756-6 Std. Pressure Contacts
3-87977-5 D-R Housing, Polarized
6-87756-6 Std. Pressure Contacts
1-87499-8 S-R Housing, Plain
102128-1 High Pressure Contacts
102387-1 D-R Ejection Housing,
Center Polarized
6-87756-6 Std. Pressure Contacts
1-87456-5 D-R Housing, Plain
6-87756-6 Std. Pressure Contacts
1-87756-6 Std. Pressure Plain
6-87456-6 D-R Housing, Contacts
87483-3 D-R Housing with Mounting Ears
6-87756-6 Std. Pressure Contacts
1825851-1 Latch 102241-8 S-R Housing Polarized with
Detent
102128-1 High Pressure Contacts
5-103166-8 Hdr
5-102202-7 Hdr
5102154-1 Hdr
1-87232-0
Hdr
5-103166-8 Hdr
103168-8
Hdr
R
R
211
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Pin and Receptacle Contacts
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod IV Contacts
5
Standard Pressure
Configuration
Material and Finish
Beryllium copper, phosphor bronze, or
copper-tin-phosphor bronze (see
charts), plated as follows:
Plating A — Selectively plated .000030
[0.00076] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating B — Selectively plated .000015
[0.00038] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000030
[0.00076] nickel on entire
contact
Related Product Data
Housings Used With —
pages 214-220
Performance Characteristics —
page 210
Application Tooling —
page 270-272
Technical Documents —
pages 276-278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Additional header sizes are
available; minimum order
quantities may apply.
Consult Tyco Electronics.
Crimp Snap-In (No-strip)
Receptacles and Crimp
Snap-In Pins with
Insulation Support
(Standard Pressure)
.068
[1.73]
Ins. Part Nos. Heavy Duty Miniature Hand
Dia. Applicator No. Tool
Range Finish Strip Form Loose Piece for AMP-O-LECTRIC Part No.
Machine*
.040-.055 [1.02-1.40] Plating A 87107-5 102348-2 567307-2 90381-1
Plating C 87107-6 102348-3
.058
[1.47]
.016
[0.41]
Gap Max.
.165
[4.19]
.470
[11.94]
.815
[20.70]
No-Strip
Receptacle
Pin with
Insulation Support
Crimp Snap-In (No-strip) Receptacles
Wire Ins. Part Nos. Heavy Duty Miniature Hand
Size Dia. Applicator No. Tool
Range (Max.) Finish Strip Form Loose Piece for AMP-O-LECTRIC Part No.
AWG [mm2]Machine* Premium Commercial
.061 Plating A 102095-3 102107-2
26-22 0.12-0.4 [1.55] Plating B 102095-2 102107-1 466812-2 91517-1 58641-1†
Plating C 5-102095-4 5-102107-3
*For use with AMP-O-LECTRIC Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos.
of applicators for use with the AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench
machines and fully automatic AMPOMATOR lead making machines.
†PRO-CRIMPER II hand tool frame with die set assembly.
Die Set Part No. 58641-2
Crimp Snap-In Pins with Insulation Support
212
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Receptacle Contacts
AMPMODU Interconnection System
Mod IV Contacts
5
Crimp Snap-In Receptacles
with Insulation Support
(Standard, Intermediate
and High Pressure)
Material and Finish
Beryllium copper, phosphor bronze or
copper-tin-phosphor bronze (see charts,
on following page), plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on crimp
area, with entire contact underplated
.000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on crimp
area, with entire contact underplated
.000050 [0.00127] nickel
Plating D — Selectively plated .000050
[0.00127] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating E — Selectively plated .000030
[0.00076] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating F — Selectively plated .000015
[0.00038] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating G — .000100-.000200
[0.00254-0.00508] tin over .000030
[0.00076] nickel on entire contact
Related Product Data
Housings Used With —
pages 214-220
Performance Characteristics —
page 210
Application Tooling —
pages 270-272
Technical Documents —
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
.058
[1.47]
.068
[1.73]
.165
[4.19]
Standard Pressure
Intermediate Pressure
High Pressure
A
A
A
A
Mating Force Unmating Force A-Gap Dimension
Standard Pressure 9 oz. Max. 1.5 oz. Min. .008/.014
Intermediate Pressure 16 oz. Max. 2 oz. Min. .008/.014
High Pressure 20 oz. Max. 3 oz. Min. .013±.002
213
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Receptacle Contacts (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod IV Contacts
5
Wire Ins. Part Nos. Heavy Duty Miniature Applicator for Hand
Size Dia. Dimension Material Finish Applicator for Stripper/ Tool
Range (Max.) A AMP-O-LECTRIC Crimper Part Nos.
AWG [mm
2
]
Strip Form Loose Piece Machine* Machine Premium Commercial
Cu-Sn-Ph Bz Plating A 5-102316-8 6-102316-4
Cu-Sn-Ph Bz Plating B 5-102316-6 6-102316-3
32-27 0.03-0.1 .040 [1.02] .445 [11.30] Be Cu Plating D 1-102917-1 1-102917-2 466655-2 466921-1 91541-1 —
Be Cu Plating E 102917-1 102917-2
Be Cu Plating F 102917-5 102917-6
Cu-Sn-Ph Bz Plating G 102316-5 1-102316-2
Cu-Sn-Ph Bz Plating A 6-87756-7 6-87756-8
Cu-Sn-Ph Bz Plating B 6-87756-2 6-87756-6
.061 [1.55] .445 [11.30]
Cu-Sn-Ph Br Plating G 87756-6 87756-7
26-22 0.12-0.4 Be Cu Plating D 1-87666-6 87667-5 466571-2 466918-1 91517-1 58641-1†
Be Cu Plating E 87666-2 87667-2
Be Cu Plating F 87666-5 87667-5
Be Cu Plating G 87666-3 87667-3
Cu-Sn-Ph Bz Plating A 6-87523-8 6-87523-9
Cu-Sn-Ph Bz Plating B 2-87523-3 2-87523-4
24-20 0.2-0.6 .069 [1.75] .470 [11.94] Be Cu Plating E 85969-8 86016-2 466562-2 466905-1 91516-1 —
Be Cu Plating F 85969-6 86016-5
Cu-Sn-Ph Br Plating G 87523-5 87523-6
Be Cu Plating G 85969-9 86016-3
Standard Pressure (Mod IV)
Wire Ins. Part Nos. Heavy Duty Miniature Applicator for Hand
Size Dia. Dimension Material Finish Applicator for Stripper/ Tool
Range (Max.) A AMP-O-LECTRIC Crimper Part Nos.
AWG [mm
2
]
Strip Form Loose Piece Machine* Machine Premium Commercial
32-27 0.03-0.1 .040 [1.02] .445 [11.30] Cu-Sn-Ph Bz Plating A
5-
102920-1
5-
102920-2 466655-2 466921-1 91541-1 —
Be Cu Plating E 102918-1 102918-2
Cu-Sn-Ph Bz Plating A
5-
103171-4
5-
103171-5
26-22 0.12-0.4 .061 [1.55] .445 [11.30] Cu-Sn-Ph Bz Plating B
5-
103171-1
5-
103171-2 466571-2 466918-1 91517-1 58641-1
†
Be Cu Plating E 102548-5 102548-6
Be Cu Plating F 102548-1 102548-3
Cu-Sn-Ph Bz Plating A 2-87195-3 2-87195-6
.069 [1.75] .470 [11.94]
Cu-Sn-Ph Bz Plating B 2-87195-4 2-87195-5
24-20 0.2-0.6 Be Cu Plating E 86492-6 87046-3 466562-2 466905-1 91516-1 —
Be Cu Plating F 86492-2 87046-1
Be Cu Plating G 86492-9 87046-4
Intermediate Pressure (Mod IV.v)
Wire Ins. Part Nos. Heavy Duty Miniature Applicator for Hand
Size Dia. Dimension Material Finish Applicator for AMP-O-MATIC Tool
Range (Max.) AAMP-O-LECTRIC Stripper/Crimper Part Nos.
AWG [mm2] Strip Form Loose Piece Machine* Machine
32-27 0.03-0.1 .040 [1.02] .445 [11.30] Ph Bz Plating E 103455-1 103455-2 466655-2 466921-1 91541-1
26-22 0.12-0.4 .061 [1.55] .445 [11.30] Ph Bz Plating E 87809-1 102128-1 466571-2 466918-1 91517-1
Ph Bz Plating G 87809-2 102128-2
24-20 0.2-0.6 .069 [1.75] .470 [11.94] Ph Bz Plating E 87309-9 1-87309-4 466562-2 466905-1 91516-1
Ph Bz Plating G 87309-8 1-87309-3
**For use with
AMP-O-LECTRIC
Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC
Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
**Contact material is phosphor bronze.
†PRO-CRIMPER II hand tool frame with die set assembly.
Die Set Part No. 58641-2
High Pressure (Mod V)**
214
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Wire-Applied Housings, Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod IV Wire-Applied Housings
5
Non-Polarized
Material
Black thermoplastic, flame retardant
Related Product Data
Contacts — pages 211-213
Mateable Headers and Posts —
pages 93-95, 101-103
Technical Documents —
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
.600
[15.24]
.175
[4.45]
±.003
[±0.08]
B
.140
[3.56]
.100
[2.54]
±.003
[±0.08]
C
X
X
A
Max.
.072
[1.83]
Ty p .
No. of Dimensions Part No.
Pos. A B C Stamped* Unstamped**
1.105 [2.67] — — — 7-87499-2
2.205 [5.21] .100 [2.54] — 87499-3 87499-4
3.305 [7.75] .100 [2.54] .100 [2.54] 87499-5 87499-6
4.405 [10.29] .200 [5.08] .100 [2.54] 87499-7 87499-8
5.505 [12.83] .200 [5.08] .200 [5.08] 87499-9 1-87499-0
6.605 [15.37] .300 [7.62] .200 [5.08] 1-87499-1 1-87499-2
7.705 [17.91] .300 [7.62] .300 [7.62] 87499-1 87499-2
8.805 [20.45] .400 [10.16] .300 [7.62] 1-87499-3 1-87499-4
9.905 [22.99] .400 [10.16] .400 [10.16] 1-87499-5 1-87499-6
10 1.005 [25.53] .500 [12.70] .400 [10.16] 1-87499-7 1-87499-8
11 1.105 [28.01] .500 [12.70] .500 [12.70] 1-87499-9 2-87499-0
12 1.205 [30.61] .600 [15.24] .500 [12.70] 2-87499-1 2-87499-2
13 1.305 [33.15] .600 [15.24] .600 [15.24] 2-87499-3 2-87499-4
14 1.405 [35.69] .700 [17.78] .600 [15.24] 2-87499-5 2-87499-6
15 1.505 [38.23] .700 [17.78] .700 [17.78] 2-87499-7 2-87499-8
16 1.605 [40.77] .800 [20.32] .700 [17.78] 2-87499-9 3-87499-0
17 1.700 [43.18] .800 [20.32] .800 [20.32] — 3-87499-2
18 1.805 [45.85] .900 [22.86] .800 [20.32] — 3-87499-4
19 1.900 [48.26] .900 [22.86] .900 [22.86] — 3-87499-6
20 2.005 [50.93] 1.000 [25.40] .900 [22.86] 3-87499-7 3-87499-8
21 2.100 [53.34] 1.000 [25.40] 1.000 [25.40] — 4-87499-0
22 2.205 [56.01] 1.100 [27.94] 1.000 [25.40] — 4-87499-2
23 2.300 [58.42] 1.100 [27.94] 1.100 [27.94] — 4-87499-4
24 2.400 [60.96] 1.200 [30.48] 1.100 [27.94] — 4-87499-6
25 2.500 [63.50] 1.200 [30.48] 1.200 [30.48] — 4-87499-8
26 2.605 [66.17] 1.300 [33.02] 1.200 [30.48] — 5-87499-0
27 2.700 [68.58] 1.300 [33.02] 1.300 [33.02] — 5-87499-2
28 2.800 [71.12] 1.400 [35.56] 1.300 [33.02] — 5-87499-4
29 2.900 [73.66] 1.400 [35.56] 1.400 [35.56] — 5-87499-6
30 3.005 [76.33] 1.500 [38.10] 1.400 [35.56] — 5-87499-8
31 3.100 [78.74] 1.500 [38.10] 1.500 [38.10] — 6-87499-0
32 3.200 [81.28] 1.600 [40.64] 1.500 [38.10] — 6-87499-2
33 3.300 [83.82] 1.600 [40.64] 1.600 [40.64] — 6-87499-4
34 3.400 [86.36] 1.700 [43.18] 1.600 [40.64] — 6-87499-6
35 3.500 [88.98] 1.700 [43.18] 1.700 [43.18] — 6-87499-8
36 3.600 [91.44] 1.800 [45.72] 1.700 [43.18] — 7-87499-0
**Cavity identification, part number and date code stamped on housing where size permits.
**No marking on housing.
Notes: 1. Strain reliefs are available and may be purchased separately. Consult Tyco Electronics.
Notes: 2. Contact Extraction/Lance Reset Tool No. 843996-3.
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
Keying Plugs
Part No. 87077-2
(Plugs directly into housing)
Section X-X
.050
[1.27]
Ty p .
.070
[1.78]
Ty p .
215
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Wire-Applied Housings, Single-Row, .100 [2.54] Centerline (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod IV Wire-Applied Housings
5
Polarized (with
Detent Latching)
A
.056
[1.42]
.050
[1.27]
.071
[1.80]
.182
[4.62]
.100
[2.54]
Ty p .
.127
[3.23]
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
Keying Plugs
Part No. 87077-2
(Plugs directly into housing)
Recessed Area
.175
[4.45]
±.003
[±0.08]
B±.003
[±0.08]
C
X
X
.072
[1.83]
.600
[15.24]
.100
[2.54]
Ty p .
Ty p .
No. of Dimensions Part Nos.
Pos. A B C Unstamped*
3.300 [7.62] .100 [2.54] .100 [2.54] 102241-1
4.400 [10.16] .200 [5.08] .100 [2.54] 102241-2
5.500 [12.70] .200 [5.08] .200 [5.08] 102241-3
6.600 [15.24] .300 [7.62] .200 [5.08] 102241-4
7.700 [17.78] .300 [7.62] .300 [7.62] 102241-5
8.800 [20.32] .400 [10.16] .300 [7.62] 102241-6
9.900 [22.86] .400 [10.16] .400 [10.16] 102241-7
10 1.000 [25.40] .500 [12.70] .400 [10.16] 102241-8
11 1.100 [27.94] .500 [12.70] .500 [12.70] 102241-9
12 1.200 [30.48] .600 [15.24] .500 [12.70] 1-102241-0
13 1.300 [33.02] .600 [15.24] .600 [15.24] 1-102241-1
14 1.400 [35.56] .700 [17.78] .600 [15.24] 1-102241-2
15 1.500 [38.10] .700 [17.78] .700 [17.78] 1-102241-3
16 1.600 [40.64] .800 [20.32] .700 [17.78] 1-102241-4
17 1.700 [43.18] .800 [20.32] .800 [20.32] 1-102241-5
18 1.800 [45.72] .900 [22.86] .800 [20.32] 1-102241-6
19 1.900 [48.26] .900 [22.86] .900 [22.86] 1-102241-7
20 2.000 [50.80] 1.000 [25.40] .900 [22.86] 1-102241-8
21 2.100 [53.34] 1.000 [25.40] 1.000 [25.40] 1-102241-9
22 2.200 [55.88] 1.100 [27.94] 1.000 [25.40] 2-102241-0
23 2.300 [58.42] 1.100 [27.94] 1.100 [27.94] 2-102241-1
24 2.400 [60.96] 1.200 [30.48] 1.100 [27.94] 2-102241-2
25 2.500 [63.50] 1.200 [30.48] 1.200 [30.48] 2-102241-3
26 2.600 [66.04] 1.300 [33.02] 1.200 [30.48] 2-102241-4
27 2.700 [68.58] 1.300 [33.02] 1.300 [33.02] 2-102241-5
28 2.800 [71.12] 1.400 [35.56] 1.300 [33.02] 2-102241-6
29 2.900 [73.66] 1.400 [35.56] 1.400 [35.56] 2-102241-7
30 3.000 [76.20] 1.500 [38.10] 1.400 [35.56] 2-102241-8
31 3.100 [78.74] 1.500 [38.10] 1.500 [38.10] 2-102241-9
32 3.200 [81.28] 1.600 [40.64] 1.500 [38.10] 3-102241-0
33 3.300 [83.82] 1.600 [40.64] 1.600 [40.64] 3-102241-1
34 3.400 [86.36] 1.700 [43.18] 1.600 [40.64] 3-102242-2
35 3.500 [88.90] 1.700 [43.18] 1.700 [43.18] 3-102241-3
36 3.600 [91.44] 1.800 [45.72] 1.700 [43.18] 3-102241-4
*No marking on housing.
Note: Contact Extraction/Lance Reset Tool No. 843996-3.
Material
Black thermoplastic, flame retardant
Related Product Data
Contacts — pages 211-213
Mateable Headers and Posts —
pages 115, 116
Flexible Film Connectors,
Single-Row Pin Assemblies —
Catalog 82007
Technical Documents —
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Section X-X
216
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod IV Wire-Applied Housings
5
No. Part Nos.
of Dimensions C = .600 [15.24] C = .645 [16.38]
Pos. A B Stamped* Unstamped** Unstamped**
2.100 [2.54] — — 5-87456-3 —
4.200 [5.08] .100 [2.54] 5-87456-0 4-87456-9 2-86177-5
6.300 [7.62] .200 [5.08] 87456-2 87456-1 1-86177-8
8.400 [10.16] .300 [7.62] 87456-4 87456-3 2-86177-0
10 .500 [12.70] .400 [10.16] 87456-6 87456-5 1-86177-2
12 .600 [15.24] .500 [12.70] 87456-8 87456-7 1-86177-3
14 .700 [17.78] .600 [15.24] 1-87456-0 87456-9 1-86177-4
16 .800 [20.32] .700 [17.78] 1-87456-2 1-87456-1 1-86177-5
18 .900 [22.86] .800 [20.32] 1-87456-4 1-87456-3 1-86177-6
20 1.000 [25.40] .900 [22.86] 1-87456-6 1-87456-5 86177-1
22 1.100 [27.94] 1.000 [25.40] — 1-87456-7 86177-2
24 1.200 [30.48] 1.100 [27.94] 2-87456-0 1-87456-9 86177-3
26 1.300 [33.02] 1.200 [30.48] 2-87456-2 2-87456-1 86177-4
28 1.400 [35.56] 1.300 [33.02] 2-87456-4 2-87456-3 86177-5
30 1.500 [38.10] 1.400 [35.56] 2-87456-6 2-87456-5 86177-6
32 1.600 [40.64] 1.500 [38.10] 2-87456-8 2-87456-7 86177-7
34 1.700 [43.18] 1.600 [40.64] 3-87456-0 2-87456-9 86177-8
36 1.800 [45.72] 1.700 [43.18] 3-87456-2 3-87456-1 86177-9
38 1.900 [48.26] 1.800 [45.72] — 3-87456-3 1-86177-0
40 2.000 [50.80] 1.900 [48.26] 3-87456-6 3-87456-5 1-86177-1
42 2.100 [53.34] 2.000 [50.80] 4-87456-4 4-87456-3 —
44 2.200 [55.88] 2.100 [53.34] 3-87456-8 3-87456-7 1-86177-7
48 2.400 [60.96] 2.300 [58.42] 6-87456-0 5-87456-9 2-86177-3
50 2.500 [63.50] 2.400 [60.96] 4-87456-0 3-87456-9 2-86177-1
52 2.600 [66.04] 2.500 [63.50] 4-87456-2 4-87456-1 1-86177-9
54 2.700 [68.58] 2.600 [66.04] — 4-87456-5 —
56 2.800 [71.12] 2.700 [68.58] — 6-87456-1 —
58 2.900 [73.66] 2.800 [71.12] — 6-87456-3 —
60 3.000 [76.20] 2.900 [73.66] 5-87456-2 5-87456-1 —
64 3.200 [81.28] 3.100 [78.74] 6-87456-6 6-87456-5 —
66 3.300 [83.82] 3.200 [81.28] 5-87456-4 5-87456-7 —
70 3.500 [88.90] 3.400 [86.36] — 5-87456-5 2-86177-4
72 3.600 [91.44] 3.500 [88.90] 4-87456-8 4-87456-7 —
**Cavity identification, part number and date code stamped on housing where size permits.
**No marking on housing.
Notes: 1. Strain reliefs are available and may be purchased separately. Consult Tyco Electronics.
Notes: 2. Contact Extraction/Lance Reset Tool No. 843996-3.
B
Non-Polarized
.100
[2.54]
X
.100
[2.54] Ty p .
.175
[4.45]
A
.240
[6.10]
.070
[1.78]
.050
[1.27]
Ty p .
.072
[1.83]
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
Keying Plugs
Part No. 87077-1
(for .645 high housings)
Part No. 87077-2
(for .600 high housings)
(Plugs directly into housing)
Material
Black thermoplastic, flame retardant
Related Product Data
Contacts — pages 211-213
Mateable Headers and Posts —
pages 96-99, 104, 105, 117-120
Technical Documents —
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Section X-X
XCR
Optional
217
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod IV Wire-Applied Housings
5
No. of Dimensions Part Nos.
Pos. A B C Stamped* Unstamped**
6.300 [7.62] .100 [2.54] .100 [2.54] 87977-1 2-87977-8
8.400 [10.16] .200 [5.08] .100 [2.54] 87977-2 2-87977-9
10 .500 [12.70] .200 [5.08] .200 [5.08] 87977-3 3-87977-0
12 .600 [15.24] .300 [7.62] .200 [5.08] 87977-4 3-87977-1
14 .700 [17.78] .300 [7.62] .300 [7.62] 87977-5 3-87977-2
16 .800 [20.32] .400 [10.16] .300 [7.62] 87977-6 3-87977-3
18 .900 [22.86] .400 [10.16] .400 [10.16] — 3-87977-4
20 1.000 [25.40] .500 [12.70] .400 [10.16] 87977-8 3-87977-5
22 1.100 [27.94] .500 [12.70] .500 [12.70] — 3-87977-6
24 1.200 [30.48] .600 [15.24] .500 [12.70] 1-87977-0 3-87977-7
26 1.300 [33.02] .600 [15.24] .600 [15.24] 1-87977-1 3-87977-8
28 1.400 [35.56] .700 [17.78] .600 [15.24] — 3-87977-9
30 1.500 [38.10] .700 [17.78] .700 [17.78] — 4-87977-0
32 1.600 [40.64] .800 [20.32] .700 [17.78] — 4-87977-1
34 1.700 [43.18] .800 [20.32] .800 [20.32] — 4-87977-2
36 1.800 [45.72] .900 [22.86] .800 [20.32] — 4-87977-3
38 1.900 [48.26] .900 [22.86] .900 [22.86] — 4-87977-4
40 2.000 [50.80] 1.000 [25.40] .900 [22.86] 1-87977-8 4-87977-5
42 2.100 [53.34] 1.000 [25.40] 1.000 [25.40] — 4-87977-6
44 2.200 [55.88] 1.100 [27.94] 1.000 [25.40] — 4-87977-7
48 2.400 [60.96] 1.200 [30.48] 1.100 [27.94] — 5-87977-6
50 2.500 [63.50] 1.200 [30.48] 1.200 [30.48] 2-87977-1 4-87977-8
52 2.600 [66.04] 1.300 [33.02] 1.200 [30.48] — 4-87977-9
54 2.700 [68.58] 1.300 [33.02] 1.300 [33.02] — 5-87977-0
56 2.800 [71.12] 1.400 [35.56] 1.300 [33.02] — 5-87977-8
58 2.900 [73.66] 1.400 [35.56] 1.400 [35.56] — 6-87977-0
60 3.000 [76.20] 1.500 [38.10] 1.400 [35.56] 2-87977-4 5-87977-1
64 3.200 [81.28] 1.600 [40.64] 1.500 [38.10] — 6-87977-2
66 3.300 [83.82] 1.600 [40.64] 1.600 [40.64] — 5-87977-2
70 3.500 [88.90] 1.700 [43.18] 1.700 [43.18] — 5-87977-3
72 3.600 [91.44] 1.800 [45.72] 1.700 [43.18] — 5-87977-4
**Cavity identification, part number and date code stamped on housing where size permits.
**No marking on housing or strain relief.
Notes: 1. Strain reliefs are available and may be purchased separately. Consult Tyco Electronics.
Notes: 2. Contact Extraction/Lance Reset Tool No. 843996-3.
A
Polarized
.175
[4.45]
.600
[15.24]
.240
[6.10]
Material
Black thermoplastic, flame retardant
Related Product Data
Contacts — pages 211-213
Mateable Headers and Posts—
pages 117-131
Technical Documents —
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
Keying Plugs
Part No. 87077-2
(Plugs directly into housing)
Strain Relief Locators
(on Housings 20 Positions
and Larger)
.100
[2.54]
.070
[1.78]
.100
[2.54]
Ty p .
±.003
[±0.08]
B±.003
[±0.08]
C
X
X
.100
[2.54]
Ty p . Ty p .
Section X-X
R
Optional
.050
[1.27]
Ty p .
218
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod IV Wire-Applied Housings
5
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Polarized (with Detent
Latching, with and without
Strain Relief/Pull Tab)
.100
[2.54]
X
.100
[2.54] Ty p .
.175
[4.45]
A
.240
[6.10]
.070
[1.78]
Ty p .
.050
[1.27]
Ty p .
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
Keying Plugs
Part No. 87077-2
(Plugs directly into housing)
Material
Black thermoplastic, flame retardant
Related Product Data
Contacts — pages 211-213
Mateable Headers and Posts —
pages 117-125, 127-133
Technical Documents —
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Section X-X
X
.600
[15.24]
R
Optional
.100
[2.54] Ty p .
±.003
[±0.08]
B±.003
[±0.08]
C
.095
[2.41]
Dia.
.500
[12.70]
1.150
[29.21] .095
[2.41]
Dia.
1.000
[25.40]
1.900
[48.26]
Strain Relief Locators
(on Housings 20 Positions
and Larger)
Housing with
Strain Relief/Pull Tab
Strain Relief Part No. 87921-1
(10 thru 18 positions)
Housing with
Strain Relief/Pull Tab
Strain Relief Part No. 87710-1
(20 positions and larger)
Part Nos.
No. of Dimensions No. of Without Strain Relief With Strain Relief
Pos. ABC
Detents Stamped* Unstamped** Stamped*
6.300 [7.62] .100 [2.54] .100 [2.54] 1 87631-2 87631-1 —
8.400 [10.16] .200 [5.08] .100 [2.54] 1 87631-4 87631-3 —
10 .500 [12.70] .200 [5.08] .200 [5.08] 1 87631-6 87631-5 87922-1
12 .600 [15.24] .300 [7.62] .200 [5.08] 1 87631-8 87631-7 87922-2
14 .700 [17.78] .300 [7.62] .300 [7.62] 1 1-87631-0 87631-9 87922-3
16 .800 [20.32] .400 [10.16] .300 [7.62] 1 1-87631-2 1-87631-1 87922-4
**Cavity identification, part number and date code stamped on housing and/or strain relief where size permits.
**No marking on housing or strain relief.
Notes: 1. The Strain Relief/Pull Tab can be bonded to any thermoplastic connector housing.
Notes: 2. Strain reliefs may be purchased separately.
Notes: 3. Contact Extraction/Lance Reset Tool No. 843996-3.
219
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod IV Wire-Applied Housings
5
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Part Nos.
No. of Dimensions No. of Without Strain Relief With Strain Relief
Pos. ABC
Detents Stamped* Unstamped** Stamped*
18 .900 [22.86] .400 [10.16] .400 [10.16] 1 1-87631-4 1-87631-3 87922-5
20 1.000 [25.40] .500 [12.70] .400 [10.16] 2 1-87631-6 1-87631-5 87733-1
22 1.100 [27.94] .500 [12.70] .500 [12.70] 2 1-87631-8 1-87631-7 —
24 1.200 [30.48] .600 [15.24] .500 [12.70] 2 2-87631-0 1-87631-9 87733-3
26 1.300 [33.02] .600 [15.24] .600 [15.24] 2 2-87631-2 2-87631-1 87733-4
28 1.400 [35.56] .700 [17.78] .600 [15.24] 2 2-87631-4 2-87631-3 —
30 1.500 [38.10] .700 [17.78] .700 [17.78] 2 2-87631-6 2-87631-5 87733-6
32 1.600 [40.64] .800 [20.32] .700 [17.78] 2 2-87631-8 2-87631-7 87733-7
34 1.700 [43.18] .800 [20.32] .800 [20.32] 2 3-87631-0 2-87631-9 87733-8
36 1.800 [45.72] .900 [22.86] .800 [20.32] 2 3-87631-2 3-87631-1 —
38 1.900 [48.26] .900 [22.86] .900 [22.86] 2 — 3-87631-3 —
40 2.000 [50.80] 1.000 [25.40] .900 [22.86] 2 3-87631-6 3-87631-5 1-87733-1
42 2.100 [53.34] 1.000 [25.40] 1.000 [25.40] 2 3-87631-8 3-87631-7 —
44 2.200 [55.88] 1.100 [27.94] 1.000 [25.40] 2 4-87631-0 3-87631-9 —
48 2.400 [60.96] 1.200 [30.48] 1.100 [27.94] 2 — 5-87631-9 —
50 2.500 [63.50] 1.200 [30.48] 1.200 [30.48] 2 4-87631-2 4-87631-1 1-87733-4
52 2.600 [66.04] 1.300 [33.02] 1.200 [30.48] 2 — 4-87631-3 —
54 2.700 [68.58] 1.300 [33.02] 1.300 [33.02] 2 4-87631-6 4-87631-5 —
58 2.900 [73.66] 1.400 [35.56] 1.400 [35.56] 2 — 6-87631-3 —
60 3.000 [76.20] 1.500 [38.10] 1.400 [35.56] 2 5-87631-2 5-87631-1 1-87733-7
64 3.200 [81.28] 1.600 [40.64] 1.500 [38.10] 2 6-87631-6 6-87631-5 —
66 3.300 [83.82] 1.600 [40.64] 1.600 [40.64] 2 — 5-87631-3 —
70 3.500 [88.90] 1.700 [43.18] 1.700 [43.18] 2 — 5-87631-5 —
72 3.800 [96.52] 1.800 [45.72] 1.700 [43.18] 2 5-87631-8 5-87631-7 —
**Cavity identification, part number and date code stamped on housing and/or strain relief where size permits.
**No marking on housing or strain relief.
Notes: 1. The Strain Relief/Pull Tab can be bonded to any thermoplastic connector housing.
Notes: 2. Strain reliefs may be purchased separately.
Notes: 3. Contact Extraction/Lance Reset Tool No. 843996-3.
220
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod IV Wire-Applied Housings
5
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Center Polarized
Material
Black thermoplastic, flame retardant
Related Product Data
Contacts — pages 211-213
Mateable Headers and Posts —
AMP-LATCH Low Profile Headers,
Shrouded — pages 135-140
Technical Documents —
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
Keying Plugs
Part No. 87077-2
(Plugs directly into housing)
Position No. 1 Indicator
ROptional
Section X-X
.030
[0.76]
.130
[3.30]
.285
[7.24]
.072
[1.83]
.600
[15.24]
.120
[3.05]
.100
[2.54]
.227
[5.77]
.130
[3.30]
B
A
C
X
X
No. of Dimensions Part Nos.
Pos. A B C (Stamped*)
8.580 [14.73] .225 [5.72] .300 [7.62] 1-102387-4
10 .680 [17.27] .275 [6.98] .400 [10.16] 102387-1
14 .880 [22.35] .375 [9.53] .600 [15.24] 102387-2
16 .980 [24.89] .425 [10.80] .700 [17.78] 102387-3
20 1.180 [29.97] .525 [13.34] .900 [22.86] 102387-4
22 1.280 [32.51] .575 [14.61] 1.000 [25.40] 1-102387-5
24 1.380 [35.05] .625 [15.88] 1.100 [27.94] 102387-5
26 1.480 [37.59] .675 [17.15] 1.200 [30.48] 102387-6
30 1.680 [42.67] .775 [19.69] 1.400 [35.56] 102387-7
34 1.880 [47.75] .875 [22.23] 1.600 [40.64] 102387-8
40 2.180 [55.37] 1.025 [26.04] 1.900 [48.26] 102387-9
44 2.380 [60.45] 1.125 [28.58] 2.100 [53.34] 1-102387-3
50 2.680 [68.07] 1.275 [32.39] 2.400 [60.96] 1-102387-0
60 3.180 [80.77] 1.525 [38.74] 2.900 [73.66] 1-102387-1
64 3.380 [85.85] 1.625 [41.28] 3.100 [78.74] 1-102387-2
*Cavity identification and Tyco Electronics stamped on housing.
†Non-functional slot is used for gating purposes during injection molding process. This gating feature is not inherent in
all production molds. Therefore, the depicted slot will only be present on housings produced on mold tooling requiring
this gating feature.
Note: Contact Extraction/Lance Reset Tool No. 843996-3.
.570
[14.88]
.150†
[3.81]
221
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Short Point, Crimp Snap-In Wire-Applied Contacts and Housings
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Short Point, Crimp Snap-In Wire-
Applied Contacts and Housings
5
Wire-to-Board
103688-9 MTE Recept. Housing
1-104479-1 Short Point Contact
104257-5 MTE Recept. Housing
1-104480-5 Short Point Contact
104482-9 Short Point Recept. Housing
5-104481-6 Short Point Contact
104257-3 MTE Recept. Housing
1-104480-4 Short Point Contact
5-104450-3 MTE Hdr 1-87232-0 Hdr
Product Facts
■Short point of contact
mates with .169 [4.29]
to .259 [6.58] long post
■Double-row housings are
end-to-end and side-to-side
stackable
■Terminates 32-20 AWG
[0.03-0.6 mm2] discrete
wire
■Contacts have insulation
support to accept a
maximum insulation
diameter of .060 [1.52]
■Available with .000015
[0.00038] or .000030
[0.00076] gold duplex,
or tin plating
■Mates with .025 [0.64]
square posts
■Dual cantilever contact
beams for reliable matings
■Locking retention latch
provides approximately
3 lb [13.34 N] of retention
force
■Unique locking latch design
helps prevent latch from
protruding through latch
window
■Contacts snap into
AMPMODU MTE single-row
housings
■Double-row housing
configurations include
.100 [2.54] centerline,
plain and polarized
■Housing sizes range from
4 to 52 positions
■Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
■Certified by
Canadian Standards
Association,
File No. LR7189
■Produced under a Quality
Management System
certified to ISO
9001
A copy of the
certificate is available
upon request
AMPMODU Short Point
receptacle contacts are
designed to mate with .025
[0.64] square posts. They
will mate with posts as short
as .169 [4.29].
Short Point double-row
housings are end-to-end
and side-to-side stackable
on .100 [2.54] centers.
Contacts also can be used
in single-row AMPMODU
MTE housings to provide
a complete wire-crimp
system, or to serve as
replacement contacts.
Performance
Characteristics
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.)
Durability — Ref. Product
Specification 108-1472
R
R
ISO
Certified
9001
222
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Short Point Crimp Snap-In Receptacle Contacts
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Short Point Contacts
5
.068
[1.73]
CC
.060
[1.52]
.460
[11.68]
Section C - C
.012
[0.30]
Gap
Quick-Change
Wire Size Applicator for
Applicator for
Range Ins.
Finish
Contact Part No. AMP-O-MATIC Hand
AWG [mm2]
Dia. (Standard Pressure) AMP-O-LECTRIC Stripper/Crimper Tool
Range Strip Form Loose Piece Machine* Machine Nos.
Plating A 1-104481-1 1-104481-3
32-28 0.03-0.08 .025-.060 [0.64-1.52] Plating B 1-104481-0 1-104481-2 567296-2 466980-1 91518-1
Plating C 5-104481-2 5-104481-6
.Plating A 1-104480-3 1-104480-6
26-22 0.13-0.3 .025-.060 [0.64-1.52] Plating B 1-104480-2 1-104480-5 567297-2 466981-1 91518-1
Plating C 1-104480-7 1-104480-4
.Plating A 1-104479-0 1-104479-3
24-20 0.2-0.5 .025-.060 [0.64-1.52] Plating B 104479-9 1-104479-2 567298-2 466982-1 91551-1
Plating C 104479-8 1-104479-1
*For use with Model “K” machines. Call the Tooling/Technical Assistance Center (1-800-722-1111) for par t nos. of applicators for use with the Model “G”
machines (shown on page 288), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Keying Plug
Part No. 104072-1
Ten plugs are supplied per strip.
Order quantity reflects the number
of strips required. Extraction/Lance Reset
Tool No. 843477-1
Material and Finish
Copper alloy C7025, plated as follows:
Plating A — Duplex plated .000030
[0.00076] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating B — Duplex plated .000015
[0.00038] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating C — .000100 [0.00254] min.
tin over .000050 [0.00127] min. nickel
on entire contact
Related Product Data
Performance Characteristics —
page 221
Housings used in —
Short Point—pages 223, 224
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling —
page 270-272
Technical Documents —
pages 276-278
Product Specification
108-1472
Application Specification
114-25038
223
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Short Point Wire-Applied Housings, Double-Row, Non-Polarized,
.100 x .100 [2.54 x 2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Short Point
Wire-Applied Housings
5
No. of Dimensions Housing
Pos. AB Part No.
4.198 [5.03] .100 [2.54] 104482-1
6.298 [7.57] .200 [5.08] 104482-2
8.398 [10.11] .300 [7.62] 104482-3
10 .498 [12.65] .400 [10.16] 104482-4
12 .598 [15.19] .500 [12.70] 104482-5
14 .698 [17.73] .600 [15.24] 104482-6
16 .798 [20.27] .700 [17.78] 104482-7
18 .898 [22.81] .800 [20.32] 104482-8
20 .998 [25.35] .900 [22.86] 104482-9
22 1.098 [27.89] 1.000 [25.40] 1-104482-0
26 1.298 [32.97] 1.200 [30.48] 1-104482-1
28 1.398 [35.51] 1.300 [33.02] 1-104482-2
30 1.498 [38.05] 1.400 [35.56] 1-104482-3
32 1.598 [40.59] 1.500 [38.10] 1-104482-4
34 1.698 [43.13] 1.600 [40.64] 1-104482-5
36 1.798 [45.67] 1.700 [43.18] 1-104482-6
38 1.898 [48.21] 1.800 [45.72] 1-104482-7
40 1.998 [50.75] 1.900 [48.26] 1-104482-8
44 2.198 [55.83] 2.100 [53.34] 1-104482-9
52 2.598 [65.99] 2.500 [63.50] 2-104482-0
Material
Black thermoplastic, flame retardant,
94V-0 rated
Related Product Data
Performance Characteristics —
page 221
Contacts — page 222
Mateable Headers —
pages 104, 105
Technical Documents —
pages 276-278
Product Specification
108-1472
Application Specification
114-25038
B
X
XSection X-X
A
.049
[1.24]
.100 Ty p .
[2.54]
.198
[5.03]
.036
[0.91]
0.72
[1.83]
.600
[15.24]
.100
[2.54]
.049 2 Plc.
[1.24]
224
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Short Point Wire-Applied Housings, Double-Row, Polarized, .100 x .100
[2.54 x 2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Short Point
Wire-Applied Housings
5
Material
Black thermoplastic, flame retardant,
94V-0 rated
Related Product Data
Performance Characteristics —
page 221
Contacts — page 222
Mateable Headers —
pages 104, 105, 135-138
Technical Documents —
pages 276-278
Product Specification
108-1472
Application Specification
114-25038
B
A
X
X
.049
[1.24]
.100 Ty p .
[2.54]
.198
[5.03]
.100
[2.54]
.100
[2.54] .095
[2.41]
.100
[2.54] Section X-X
.036
[0.91]
0.72
[1.83]
.600
[15.24]
No.of Dimensions Housing
Pos. AB Part No.
8.398 [10.11] .300 [7.62] 104483-1
10 .498 [12.65] .400 [10.16] 1-104483-1
12 .598 [15.19] .500 [12.70] 1-104483-2
14 .698 [17.73] .600 [15.24] 104483-9
18 .898 [22.81] .800 [20.32] 104483-2
20 .998 [25.35] .900 [22.86] 104483-3
26 1.298 [32.97] 1.200 [30.48] 104483-4
30 1.498 [38.05] 1.400 [35.56] 104483-5
38 1.898 [48.21] 1.800 [45.72] 104483-6
50 2.498 [63.45] 2.400 [60.96] 1-104483-3
52 2.598 [65.99] 2.500 [63.50] 1-104483-0
54 2.698 [68.53] 2.600 [66.04] 104483-7
64 3.198 [81.23] 3.100 [78.74] 104483-8
Note: Other sizes can be made available on request.
.049 2 Plc.
[1.24]
225
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Interconnection System
AMPMODU Interconnection System
MTE Interconnection System
5
Performance
Specifications
Electrical Characteristics
Contact Current Rating —
3 amperes for single contact in free air
(Amperage could vary due to ambient
temperature, wire size and duty cycles.)
Contact Termination
Resistance — 15 milliohms (max.)
Dielectric Withstanding Voltage —
At Sea Level–600 VAC, rms
At 70,000 Ft. [21 336 m]–225 VAC, rms
Insulation Resistance —
5,000 megohms (min.)
Environmental Characteristics
Operating Temperature —
-65°C to +105°C
Vibration — 15 G’s (gold), 10 G’s (tin)
Physical Shock — 50 G’s
Industrial Mixed Flow Gasing —
Class 1 (20 days) (gold)
Product Specification
108-25034
Application Specification
114-25026
Product Facts
■Receptacle assemblies mate
with .025 [0.64] sq. posts;
mating post length is .200
[5.08] min., .250 [6.35] max.
■Proven AMPMODU receptacle
contact design; dual
cantilever beams, built-in
anti-overstress, completely
enclosed “box” design,
standard or high-pressure
■Insulation displacement
technology
■Two contact sizes for
terminating 30-22 AWG [0.05-
0.3 mm2] wire range; .054
[1.37] max. insulation diam -
eter with an insulation wall
thickness of .015 [0.38] max.
■Choice of gold duplex or tin
plated contacts
■Interchangeable crimp
snap-in pin and receptacle
contacts available
■Housing sizes 2 through
25 positions, single-row .100
[2.54] centers
■Plain housings are end-to-end
and/or back-to-back stackable
for open pin field applications
■Optional header with
“swaged tail” feature helps
prevent movement prior to
flow soldering
■Integral latch provides
positive retention between
header and receptacle
housing
■Coupling shrouds permit
ganging of smaller connectors
with guide ribs to form larger
single- or double-row
latching connectors
■Mass terminating tooling
provides lowest applied cost
for most production needs
■SMT and SMT compatible,
high-temp headers available
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR7189
The AMPMODU MTE
Interconnection System
offers both wire-to-board
and wire-to-wire connectors
using .025 [0.64] sq. post
technology.
The AMPMODU MTE
Interconnection System
consists of single-row
housings with contacts
preloaded on .100 [2.54]
centers. Housings are
furnished with contacts
partially inserted, leaving
the termination areas
exposed. Final contact
insertion can be
accomplished automatically
with Tyco Electronics
application equipment, and
manually when terminated
with the Tyco Electronics
pistol grip hand tool.
The heart of the system is
the insulation displacement
contact design, featured in
both pin and receptacle
contacts. The receptacle
contact, available in either
standard or high-pressure,
features dual cantilever
beams in an enclosed
“box.” The post stop helps
prevent a mating post from
disturbing the wire
termination and also limits
the mating depth of a long
post to protect a wrap-type
termination at the base of
the post. The forward
contact stop helps prevent
contact overinsertion prior
to termination. All contacts
are furnished on carrier
strips which are interlocked
for stability and positive
location during termination.
Single-row housings are
available in sizes 2 through
25 positions. Included are
three styles of receptacle
housings—plain, polarized/
latching and ribbed and two
styles of pin housings,
shrouded with polarizing/
latching feature and ribbed.
R
R
226
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Interconnection System (Continued)
AMPMODU Interconnection System
MTE Interconnection System
5
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)
Receptacle Assemblies
Polarized/Latching
(See pages 230 & 231)
Double-Row Coupling
Shroud (See page 241)
AMPMODU Shrouded
Headers, Double-Row,
Straight or Right Angle
Post1(See pages
119-121, 124, 125, 127,
128, 131-133 & 149)
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)
Receptacle Contact,
Insulation Displacement
(Used in all
Receptacle Assemblies)
AMPMODU Breakaway Headers,
Single- or Double-Row, Straight
or Right–Angle Post, with or
without Board Retention Feature
(See pages 102-105)
Receptacle Assemblies Plain
(See pages 228 and 229)
High Pressure Receptacle Assemblies,
Plain (See page 234)
Receptacle
Assemblies,
Polarized/Latching (See
pages 230 & 231)
High-Temp Headers,
Polarized/Latching, Straight
and Right Angle Post,
with or without Holddown
(See pages 249 & 250)2
Headers,
Polarized/Latching,
Straight Post, with or
without Swaged Tail
(See pages 244 & 245)2
Headers,
Polarized/Latching,
Right Angle Post, with
or without Holddown
(See pages 246 & 247)
1Mating AMPMODU Double-Row Shrouded Header Assemblies must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline of last
1post to inside of end shroud wall.
2Surface Mount Right-Angle and Vertical Headers are also available (see pages 251 and 252)
Wire-to-Board
Single-Row Coupling
Shroud (See page 240)
227
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Interconnection System (Continued)
AMPMODU Interconnection System
MTE Interconnection System
5
Receptacle Contact,
Insulation Displacement
(Used in all
Receptacle Assemblies)
Crimp Snap-In
Receptacle Contact
(Used with Unloaded
Housings—
See page 253)
Crimp Snap-In Pin
Contact (Used with
Unloaded Housings—
See page 254)
Pin Contact,
Insulation
Displacement
(Used in all Pin
Assemblies)
Pin Assemblies, Shrouded
Polarized/Latching
(See pages 236 & 237)
Receptacle Assemblies,
Polarized/Latching
(See pages 230 & 231)
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)
Single-Row
Coupling
Shroud (See
page 240)
Panel Mount
Pin Shroud
(See page 242)
Pin Assemblies
with Guide Ribs (See
pages 238 & 239)
Note: For wire-to-wire applications shown above, all pin and receptacle assembly combinations are intermateable.
Wire-to-Wire
228
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Receptacle Assemblies—Plain, Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
MTE Receptacle Assemblies
5
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
Tyco Electronics Manual Pistol
Grip Tool.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze,
plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
Related Product Data
Mateable AMPMODU Products
Breakaway Headers — pages 102-
110 (with .230 mating length)
Reeled Breakaway Headers —
pages 106, 107 (with .230 mating
length)
Machine Applied Bandolier
Posts — page 163
Single-Row Shrouded Headers
with .066 [1.68] End Dimension —
pages 115, 116
Interchangeable Crimp Contacts
(Short Point) — page 253
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Receptacle Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
.098
[2.49]
.100
[2.54] Ty p .
B
Ty p .
A
.520
[13.21]
These receptacle assemblies
with plain housings can be
stacked end-to-end and/or side-
to-side for single or double-row
connections to an open pin field
with a .100 [2.54] centerline grid.
229
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Receptacle Assemblies—Strip Form Plain,
Single-Row, .100 [2.54] Centerline (Continued)
MTE Receptacle Assemblies—Individual Form Plain,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Receptacle Assemblies
5
Housing Strip Form Receptacle Assembly Strip Form Receptacle Assembly
No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. AB
Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings
Segment
22.000 [50.80] .198 [5.03] 10 5-103979-1 5-103978-1 5-103977-1 5-103976-1 5-103975-1 5-103974-1 103688-1
32.400 [60.96] .298 [7.57] 8 5-103979-2 5-103978-2 5-103977-2 5-103976-2 5-103975-2 5-103974-2 103688-2
41.990 [50.55] .398 [10.11] 5 5-103979-3 5-103978-3 5-103977-3 5-103976-3 5-103975-3 5-103974-3 103688-3
51.990 [50.55] .498 [12.65] 4 5-103979-4 5-103978-4 5-103977-4 5-103976-4 5-103975-4 5-103974-4 103688-4
62.390 [60.71] .598 [15.19] 4 5-103979-5 5-103978-5 5-103977-5 5-103976-5 5-103975-5 5-103974-5 103688-5
71.400 [35.56] .698 [17.73] 2 5-103979-6 5-103978-6 5-103977-6 5-103976-6 5-103975-6 5-103974-6 103688-6
81.600 [40.64] .798 [20.27] 2 5-103979-7 5-103978-7 5-103977-7 5-103976-7 5-103975-7 5-103974-7 103688-7
91.800 [45.72] .898 [22.81] 2 5-103979-8 5-103978-8 5-103977-8 5-103976-8 5-103975-8 5-103974-8 103688-8
10 2.000 [50.80] .998 [23.35] 2 5-103979-9 5-103978-9 5-103977-9 5-103976-9 5-103975-9 5-103974-9 103688-9
11 2.200 [55.88] 1.098 [27.89] 2 6-103979-0 6-103978-0 6-103977-0 6-103976-0 6-103975-0 6-103974-0 1-103688-0
12 2.400 [60.96] 1.198 [30.43] 2 6-103979-1 6-103978-1 6-103977-1 6-103976-1 6-103975-1 6-103974-1 1-103688-1
No. of Dimensions Individual Receptacle Assembly Individual Receptacle Assembly Unloaded
Pos. B 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.298 [32.96] 6-103903-2 6-103684-2 6-103685-2 6-103902-2 6-103686-2 6-103687-2 1-103688-2
14 1.398 [35.51] 6-103903-3 6-103684-3 6-103685-3 6-103902-3 6-103686-3 6-103687-3 1-103688-3
15 1.498 [38.05] 6-103903-4 6-103684-4 6-103685-4 6-103902-4 6-103686-4 6-103687-4 1-103688-4
16 1.598 [40.59] 6-103903-5 6-103684-5 6-103685-5 6-103902-5 6-103686-5 6-103687-5 1-103688-5
17 1.698 [43.13] 6-103903-6 6-103684-6 6-103685-6 6-103902-6 6-103686-6 6-103687-6 1-103688-6
18 1.798 [45.67] 6-103903-7 6-103684-7 6-103685-7 6-103902-7 6-103686-7 6-103687-7 1-103688-7
19 1.898 [48.20] 6-103903-8 6-103684-8 6-103685-8 6-103902-8 6-103686-8 6-103687-8 1-103688-8
20 1.998 [50.75] 6-103903-9 6-103684-9 6-103685-9 6-103902-9 6-103686-9 6-103687-9 1-103688-9
21 2.098 [53.29] 7-103903-0 7-103684-0 7-103685-0 7-103902-0 7-103686-0 7-103687-0 2-103688-0
22 2.198 [55.83] 7-103903-1 7-103684-1 7-103685-1 7-103902-1 7-103686-1 7-103687-1 2-103688-1
23 2.298 [58.37] 7-103903-2 7-103684-2 7-103685-2 7-103902-2 7-103686-2 7-103687-2 2-103688-2
24 2.398 [60.91] 7-103903-3 7-103684-3 7-103685-3 7-103902-3 7-103686-3 7-103687-3 2-103688-3
25 2.498 [63.45] 7-103903-4 7-103684-4 7-103685-4 7-103902-4 7-103686-4 7-103687-4 2-103688-4
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into
housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with
Tyco Electronics
pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
230
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Receptacle Assemblies—Polarized/Latching,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
MTE Receptacle Assemblies
5
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze, plated
as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
Related Product Data
Mateable AMPMODU Products
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide
Ribs (installed in Panel Mount
Pin Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Interchangeable Crimp Contacts
(Short Point) — page 253
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Receptacle Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
.098
[2.49]
.100
[2.54] Ty p .
B
Ty p .
A
.520
[13.21]
Preassembled housings in strip
form are available in positions 2 thru
12. For ease of handling, positions
2 thru 5 are recommended when
using the Tyco Electronics Manual
Pistol Grip Tool.
231
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Receptacle Assemblies—Strip Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Receptacle Assemblies
5
Housing Strip Form Receptacle Assembly Strip Form Receptacle Assembly
No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. AB
Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings
Segment
22.000 [50.80] .198 [5.03] 10 5-103961-1 5-103960-1 5-103959-1 5-103958-1 5-103957-1 5-103956-1 104257-1
32.400 [60.96] .298 [7.57] 8 5-103961-2 5-103960-2 5-103959-2 5-103958-2 5-103957-2 5-103956-2 104257-2
41.990 [50.55] .398 [10.11] 5 5-103961-3 5-103960-3 5-103959-3 5-103958-3 5-103957-3 5-103956-3 104257-3
51.990 [50.55] .498 [12.65] 4 5-103961-4 5-103960-4 5-103959-4 5-103958-4 5-103957-4 5-103956-4 104257-4
62.390 [60.71] .598 [15.19] 4 5-103961-5 5-103960-5 5-103959-5 5-103958-5 5-103957-5 5-103956-5 104257-5
71.400 [35.56] .698 [17.73] 2 5-103961-6 5-103960-6 5-103959-6 5-103958-6 5-103957-6 5-103956-6 104257-6
81.600 [40.64] .798 [20.27] 2 5-103961-7 5-103960-7 5-103959-7 5-103958-7 5-103957-7 5-103956-7 104257-7
91.800 [45.72] .898 [22.81] 2 5-103961-8 5-103960-8 5-103959-8 5-103958-8 5-103957-8 5-103956-8 104257-8
10 2.000 [50.80] .998 [23.35] 2 5-103961-9 5-103960-9 5-103959-9 5-103958-9 5-103957-9 5-103956-9 104257-9
11 2.200 [55.88] 1.098 [27.89] 2 6-103961-0 6-103960-0 6-103959-0 6-103958-0 6-103957-0 6-103956-0 1-104257-0
12 2.400 [60.96] 1.198 [30.43] 2 6-103961-1 6-103960-1 6-103959-1 6-103958-1 6-103957-1 6-103956-1 1-104257-1
MTE Receptacle Assemblies—Individual Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline
No. of Dimensions Individual Receptacle Assembly Individual Receptacle Assembly Unloaded
Pos. B 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.298 [32.96] 6-103897-2 6-103640-2 6-103641-2 6-103734-2 6-103644-2 6-103645-2 1-104257-2
14 1.398 [35.51] 6-103897-3 6-103640-3 6-103641-3 6-103734-3 6-103644-3 6-103645-3 1-104257-3
15 1.498 [38.05] 6-103897-4 6-103640-4 6-103641-4 6-103734-4 6-103644-4 6-103645-4 1-104257-4
16 1.598 [40.59] 6-103897-5 6-103640-5 6-103641-5 6-103734-5 6-103644-5 6-103645-5 1-104257-5
17 1.698 [43.13] 6-103897-6 6-103640-6 6-103641-6 6-103734-6 6-103644-6 6-103645-6 1-104257-6
18 1.798 [45.67] 6-103897-7 6-103640-7 6-103641-7 6-103734-7 6-103644-7 6-103645-7 1-104257-7
19 1.898 [48.20] 6-103897-8 6-103640-8 6-103641-8 6-103734-8 6-103644-8 6-103645-8 1-104257-8
20 1.998 [50.75] 6-103897-9 6-103640-9 6-103641-9 6-103734-9 6-103644-9 6-103645-9 1-104257-9
21 2.098 [53.29] 7-103897-0 7-103640-0 7-103641-0 7-103734-0 7-103644-0 7-103645-0 2-104257-0
22 2.198 [55.83] 7-103897-1 7-103640-1 7-103641-1 7-103734-1 7-103644-1 7-103645-1 2-104257-1
23 2.298 [58.37] 7-103897-2 7-103640-2 7-103641-2 7-103734-2 7-103644-2 7-103645-2 2-104257-2
24 2.398 [60.91] 7-103897-3 7-103640-3 7-103641-3 7-103734-3 7-103644-3 7-103645-3 2-104257-3
25 2.498 [63.45] 7-103897-4 7-103640-4 7-103641-4 7-103734-4 7-103644-4 7-103645-4 2-104257-4
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into
housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
232
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Receptacle Assemblies—Guide Ribs,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
MTE Receptacle Assemblies
5
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recommended
when using the Tyco Electronics
Manual Pistol Grip Tool.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze,
plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
Related Product Data
Coupling Shrouds used with —
Single-Row — page 240
Double-Row — page 241
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Single-Row Coupling
Shrouds) —
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide Ribs
(installed in Panel Mount Pin
Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Double-Row Coupling
Shrouds) —
Headers, Shrouded, Double-Row
(.318 [8.08] mating post length,
.150 [3.81] end dimension) —
pages 119-121, 124, 125, 128, 129,
131-133
Receptacle Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
.098
[2.49]
.100
[2.54] Ty p
B
Ty p .
A
.520
[13.21]
Interchangeable Crimp Contacts—
(Short Point) — page 253
Application Tooling —
page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
233
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Receptacle Assemblies—Strip Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline (Continued)
MTE Receptacle Assemblies—Individual Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Receptacle Assemblies
5
Housing Strip Form Receptacle Assembly Strip Form Receptacle Assembly
No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. AB
Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings
Segment
22.000 [50.80] .198 [5.03] 10 5-103973-1 5-103972-1 5-103971-1 5-103970-1 5-103969-1 5-103968-1 103648-1
32.400 [60.96] .298 [7.57] 8 5-103973-2 5-103972-2 5-103971-2 5-103970-2 5-103969-2 5-103968-2 103648-2
41.990 [50.55] .398 [10.11] 5 5-103973-3 5-103972-3 5-103971-3 5-103970-3 5-103969-3 5-103968-3 103648-3
51.990 [50.55] .498 [12.65] 4 5-103973-4 5-103972-4 5-103971-4 5-103970-4 5-103969-4 5-103968-4 103648-4
62.390 [60.71] .598 [15.19] 4 5-103973-5 5-103972-5 5-103971-5 5-103970-5 5-103969-5 5-103968-5 103648-5
71.400 [35.56] .698 [17.73] 2 5-103973-6 5-103972-6 5-103971-6 5-103970-6 5-103969-6 5-103968-6 103648-6
81.600 [40.64] .798 [20.27] 2 5-103973-7 5-103972-7 5-103971-7 5-103970-7 5-103969-7 5-103968-7 103648-7
91.800 [45.72] .898 [22.81] 2 5-103973-8 5-103972-8 5-103971-8 5-103970-8 5-103969-8 5-103968-8 103648-8
10 2.000 [50.80] .998 [23.35] 2 5-103973-9 5-103972-9 5-103971-9 5-103970-9 5-103969-9 5-103968-9 103648-9
11 2.200 [55.88] 1.098 [27.89] 2 6-103973-0 6-103972-0 6-103971-0 6-103970-0 6-103969-0 6-103968-0 1-103648-0
12 2.400 [60.96] 1.198 [30.43] 2 6-103973-1 6-103972-1 6-103971-1 6-103970-1 6-103969-1 6-103968-1 1-103648-1
No. of Dimensions Individual Receptacle Assembly Individual Receptacle Assembly Unloaded
Pos. B 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.298 [32.96] 6-103901-2 6-103649-2 6-103650-2 6-103900-2 6-103651-2 6-103652-2 1-103648-2
14 1.398 [35.51] 6-103901-3 6-103649-3 6-103650-3 6-103900-3 6-103651-3 6-103652-3 1-103648-3
15 1.498 [38.05] 6-103901-4 6-103649-4 6-103650-4 6-103900-4 6-103651-4 6-103652-4 1-103648-4
16 1.598 [40.59] 6-103901-5 6-103649-5 6-103650-5 6-103900-5 6-103651-5 6-103652-5 1-103648-5
17 1.698 [43.13] 6-103901-6 6-103649-6 6-103650-6 6-103900-6 6-103651-6 6-103652-6 1-103648-6
18 1.798 [45.67] 6-103901-7 6-103649-7 6-103650-7 6-103900-7 6-103651-7 6-103652-7 1-103648-7
19 1.898 [48.20] 6-103901-8 6-103649-8 6-103650-8 6-103900-8 6-103651-8 6-103652-8 1-103648-8
20 1.998 [50.75] 6-103901-9 6-103649-9 6-103650-9 6-103900-9 6-103651-9 6-103652-9 1-103648-9
21 2.098 [53.29] 7-103901-0 7-103649-0 7-103650-0 7-103900-0 7-103651-0 7-103652-0 2-103648-0
22 2.198 [55.83] 7-103901-1 7-103649-1 7-103650-1 7-103900-1 7-103651-1 7-103652-1 2-103648-1
23 2.298 [58.37] 7-103901-2 7-103649-2 7-103650-2 7-103900-2 7-103651-2 7-103652-2 2-103648-2
24 2.398 [60.91] 7-103901-3 7-103649-3 7-103650-3 7-103900-3 7-103651-3 7-103652-3 2-103648-3
25 2.498 [63.45] 7-103901-4 7-103649-4 7-103650-4 7-103900-4 7-103651-4 7-103652-4 2-103648-4
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully
inserted into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics
pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
234
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE High Pressure Receptacle Assemblies—Plain,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Receptacle Assemblies
5
Receptacle Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
.098
[2.49]
.100
[2.54] Ty p .
B
Ty p .
A
.520
[13.21]
Strip Form Strip Form
No. of Dimensions Housings Receptacle Receptacle
Pos. Quantities Per Assembly Assembly
AB
Strip Segment 30-26 AWG 26-22 AWG
[.05-.15mm2] Wire [.12-.30mm2] Wire
21.980 [50.29] .198 [5.03] 10 5-104438-1 5-104439-1
31.490 [37.85] .298 [7.57] 5 5-104438-2 5-104439-2
41.990 [50.55] .398 [10.11] 5 5-104438-3 5-104439-3
51.990 [50.55] .498 [12.65] 4 5-104438-4 5-104439-4
62.390 [60.71] .598 [15.19] 4 5-104438-5 5-104439-5
71.400 [35.56] .698 [17.73] 2 5-104438-6 5-104439-6
81.600 [40.64] .798 [20.27] 2 5-104438-7 5-104439-7
91.800 [45.72] .898 [22.81] 2 5-104438-8 5-104439-8
10 2.000 [50.80] .998 [23.35] 2 5-104438-9 5-104439-9
11 2.200 [55.88] 1.098 [27.89] 2 6-104438-0 6-104439-0
12 2.400 [60.96] 1.198 [30.43] 2 6-104438-1 6-104439-1
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched
into “preload” windows. Contacts are fully inserted into housings automatically when terminated with
Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip
hand tool.
2. High pressure receptacle contacts can be made available in other housing styles and position sizes.
Contact your Tyco Electronics sales representative.
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
Tyco Electronics Manual Pistol
Grip Tool.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze, duplex
plated .000030 [0.00076] gold on
contact area, .000050 [0.00127] min.
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an
insulation wall thickness of .015 [0.38]
max. Mating post length for preloaded
housings is .200 [5.08] min., .250 [6.35]
max.
Related Product Data
Mateable AMPMODU Products
Breakaway Headers — pages 102-
110, (with .230 mating length)
Reeled Breakaway Headers —
pages 106, 107 (with .230 mating
length)
Machine Applied Bandolier
Posts — page 163
Application Tooling —
page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278)
Product Specification
108-25034
Application Specification
114-25026
235
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE High Pressure Receptacle Assemblies – Guide Ribs
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Pin Assemblies
5
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
Tyco Electronics Manual Pistol
Grip Tool.
Material and Finish
Housing — Thermoplastic, black,
94V-0 rated
Contacts — Phosphor Bronze,
duplex plated .000030 [0.00076] gold
on contact area, .000050 [0.00127] min.
tin on crimp area, with entire contact
underplated .000050 [0.00127] nickel.
Related Product Data
Coupling Shrouds used with —
Single-Row — page 240
Double-Row — page 241
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Single-Row Coupling
Shrouds) —
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide Ribs
(installed in Panel Mount Pin
Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Double-Row Coupling
Shrouds) —
Headers, Shrouded, Double-Row
(.318 [8.08] mating post length,
.150 [3.81] end dimension) —
pages 119-121, 124, 125, 128, 129,
131-133
Application Tooling —
page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Receptacle Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
.098
[2.49]
.100
[2.54] Ty p
B
Ty p .
A
.520
[13.21]
Strip Form Strip Form
No. of Dimensions Housings Receptacle Receptacle
Pos. Quantities Per Assembly Assembly
AB
Strip Segment 30-26 AWG 26-22 AWG
[.05-.15mm2] Wire [.12-.30mm2] Wire
21.980 [50.29] .198 [5.03] 10 5-147396-1 5-147030-3
31.490 [37.85] .298 [7.57] 5 5-147396-2 5-147030-4
41.990 [50.55] .398 [10.11] 5 5-147396-3 5-147030-1
51.990 [50.55] .498 [12.65] 4 5-147396-4 5-147030-2
62.390 [60.71] .598 [15.19] 4 5-147396-5 5-147030-5
71.400 [35.56] .698 [17.73] 2 5-147396-6 5-147030-6
81.600 [40.64] .798 [20.27] 2 5-147396-7 5-147030-7
91.800 [45.72] .898 [22.81] 2 5-147396-8 5-147030-8
10 2.000 [50.80] .998 [23.35] 2 5-147396-9 5-147030-9
11 2.200 [55.88] 1.098 [27.89] 2 6-147396-0 6-147030-0
12 2.400 [60.96] 1.198 [30.43] 2 6-147396-1 6-147030-1
236
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Pin Assemblies, Shrouded—Polarized/Latching,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
MTE Pin Assemblies
5
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
Tyco Electronics Manual Pistol
Grip Tool.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze, plated
as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Related Product Data
Mateable AMPMODU Products —
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Interchangeable Crimp Contacts —
page 254
Application Tooling —
page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
.200
[5.08]
.100
[2.54] Ty p .
Position No. 1
Indicator
1.470
[37.34]
.950
[24.13]
B
Ty p .
A
.520
[13.21]
.260
[6.60]
Pin Contacts
(See Note 1)
237
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Pin Assemblies, Shrouded—Strip Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline (Continued)
MTE Pin Assemblies, Shrouded—Individual Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Pin Assemblies
5
Housing Strip Form Pin Assembly Strip Form Pin Assembly
No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. AB
Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings
Segment
22.360 [59.94] .295 [7.49] 8 5-103949-1 5-103948-1 5-103947-1 5-103946-1 5-103945-1 5-103944-1 103653-1
31.980 [50.29] .395 [10.03] 5 5-103949-2 5-103948-2 5-103947-2 5-103946-2 5-103945-2 5-103944-2 103653-2
41.980 [50.29] .495 [12.57] 4 5-103949-3 5-103948-3 5-103947-3 5-103946-3 5-103945-3 5-103944-3 103653-3
52.380 [60.45] .595 [15.11] 4 5-103949-4 5-103948-4 5-103947-4 5-103946-4 5-103945-4 5-103944-4 103653-4
61.390 [35.31] .695 [17.65] 2 5-103949-5 5-103948-5 5-103947-5 5-103946-5 5-103945-5 5-103944-5 103653-5
72.390 [60.71] .795 [20.19] 3 5-103949-6 5-103948-6 5-103947-6 5-103946-6 5-103945-6 5-103944-6 103653-6
81.790 [45.47] .895 [22.73] 2 5-103949-7 5-103948-7 5-103947-7 5-103946-7 5-103945-7 5-103944-7 103653-7
91.990 [50.57] .995 [25.27] 2 5-103949-8 5-103948-8 5-103947-8 5-103946-8 5-103945-8 5-103944-8 103653-8
10 2.190 [55.63] 1.095 [27.81] 2 5-103949-9 5-103948-9 5-103947-9 5-103946-9 5-103945-9 5-103944-9 103653-9
11 2.390 [60.71] 1.195 [30.35] 2 6-103949-0 6-103948-0 6-103947-0 6-103946-0 6-103945-0 6-103944-0 1-103653-0
12 2.590 [65.79] 1.295 [32.89] 2 6-103949-1 6-103948-1 6-103947-1 6-103946-1 6-103945-1 6-103944-1 1-103653-1
No. of Dimensions Individual Pin Assembly Individual Pin Assembly Unloaded
Pos. B 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.395 [35.43] 6-103894-2 6-103658-2 6-103659-2 6-103893-2 6-103660-2 6-103661-2 1-103653-2
14 1.495 [37.97] 6-103894-3 6-103658-3 6-103659-3 6-103893-3 6-103660-3 6-103661-3 1-103653-3
15 1.595 [40.51] 6-103894-4 6-103658-4 6-103659-4 6-103893-4 6-103660-4 6-103661-4 1-103653-4
16 1.695 [43.05] 6-103894-5 6-103658-5 6-103659-5 6-103893-5 6-103660-5 6-103661-5 1-103653-5
17 1.795 [45.59] 6-103894-6 6-103658-6 6-103659-6 6-103893-6 6-103660-6 6-103661-6 1-103653-6
18 1.895 [48.13] 6-103894-7 6-103658-7 6-103659-7 6-103893-7 6-103660-7 6-103661-7 1-103653-7
19 1.995 [50.67] 6-103894-8 6-103658-8 6-103659-8 6-103893-8 6-103660-8 6-103661-8 1-103653-8
20 2.095 [53.21] 6-103894-9 6-103658-9 6-103659-9 6-103893-9 6-103660-9 6-103661-9 1-103653-9
21 2.195 [55.75] 7-103894-0 7-103658-0 7-103659-0 7-103893-0 7-103660-0 7-103661-0 2-103653-0
22 2.295 [58.29] 7-103894-1 7-103658-1 7-103659-1 7-103893-1 7-103660-1 7-103661-1 2-103653-1
23 2.395 [60.83] 7-103894-2 7-103658-2 7-103659-2 7-103893-2 7-103660-2 7-103661-2 2-103653-2
24 2.495 [63.37] 7-103894-3 7-103658-3 7-103659-3 7-103893-3 7-103660-3 7-103661-3 2-103653-3
25 2.595 [65.91] 7-103894-4 7-103658-4 7-103659-4 7-103893-4 7-103660-4 7-103661-4 2-103653-4
Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted
into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol
grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove pin contacts.
238
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Pin Assemblies—Guide Ribs,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
MTE Pin Assemblies
5
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
Tyco Electronics Manual Pistol
Grip Tool.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze,
plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Related Product Data
Mateable AMPMODU MTE Products
(with Pin Assembly Installed in
Panel Mount Pin Shroud) —
pages 242, 243
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single Row
Coupling Shroud) — pages 232, 233,
235, 240
Interchangeable Crimp Contacts —
page 254
Application Tooling —
page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
.098
[2.49]
.100
[2.54] Ty p .
Pin Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
B
Ty p .
A
.520
[13.21]
239
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Pin Assemblies—Strip Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline (Continued)
MTE Pin Assemblies—Individual Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Pin Assemblies
5
No. of Dimensions Individual Pin Assembly Individual Pin Assembly Unloaded
Pos. B 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.398 [35.51] 6-103896-2 6-103657-2 6-103656-2 6-103895-2 6-103655-2 6-103654-2 1-104503-2
14 1.498 [38.05] 6-103896-3 6-103657-3 6-103656-3 6-103895-3 6-103655-3 6-103654-3 1-104503-3
15 1.598 [40.59] 6-103896-4 6-103657-4 6-103656-4 6-103895-4 6-103655-4 6-103654-4 1-104503-4
16 1.698 [43.13] 6-103896-5 6-103657-5 6-103656-5 6-103895-5 6-103655-5 6-103654-5 1-104503-5
17 1.798 [45.67] 6-103896-6 6-103657-6 6-103656-6 6-103895-6 6-103655-6 6-103654-6 1-104503-6
18 1.898 [48.20] 6-103896-7 6-103657-7 6-103656-7 6-103895-7 6-103655-7 6-103654-7 1-104503-7
19 1.998 [50.75] 6-103896-8 6-103657-8 6-103656-8 6-103895-8 6-103655-8 6-103654-8 1-104503-8
20 2.098 [53.29] 6-103896-9 6-103657-9 6-103656-9 6-103895-9 6-103655-9 6-103654-9 1-104503-9
21 2.198 [55.83] 7-103896-0 7-103657-0 7-103656-0 7-103895-0 7-103655-0 7-103654-0 2-104503-0
22 2.298 [58.37] 7-103896-1 7-103657-1 7-103656-1 7-103895-1 7-103655-1 7-103654-1 2-104503-1
23 2.398 [60.91] 7-103896-2 7-103657-2 7-103656-2 7-103895-2 7-103655-2 7-103654-2 2-104503-2
24 2.498 [63.45] 7-103896-3 7-103657-3 7-103656-3 7-103895-3 7-103655-3 7-103654-3 2-104503-3
25 2.598 [65.99] 7-103896-4 7-103657-4 7-103656-4 7-103895-4 7-103655-4 7-103654-4 2-104503-4
Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted
into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip
hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove pin contacts.
Housing Strip Form Pin Assembly Strip Form Pin Assembly
No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. AB
Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings
Segment
21.980 [50.29] 0.198 [5.03] 10 5-103955-1 5-103954-1 5-103953-1 5-103952-1 5-103951-1 5-103950-1 104503-1
31.490 [37.85] 0.298 [7.57] 5 5-103955-2 5-103954-2 5-103953-2 5-103952-2 5-103951-2 5-103950-2 104503-2
41.990 [50.55] 0.398 [10.11] 5 5-103955-3 5-103954-3 5-103953-3 5-103952-3 5-103951-3 5-103950-3 104503-3
51.990 [50.55] 0.498 [12.65] 4 5-103955-4 5-103954-4 5-103953-4 5-103952-4 5-103951-4 5-103950-4 104503-4
62.390 [60.71] 0.598 [15.19] 4 5-103955-5 5-103954-5 5-103953-5 5-103952-5 5-103951-5 5-103950-5 104503-5
71.400 [35.56] 0.698 [17.73] 2 5-103955-6 5-103954-6 5-103953-6 5-103952-6 5-103951-6 5-103950-6 104503-6
81.600 [40.64] 0.798 [20.27] 2 5-103955-7 5-103954-7 5-103953-7 5-103952-7 5-103951-7 5-103950-7 104503-7
91.800 [45.72] 0.898 [22.81] 2 5-103955-8 5-103954-8 5-103953-8 5-103952-8 5-103951-8 5-103950-8 104503-8
10 2.000 [50.80] 0.998 [25.35] 2 5-103955-9 5-103954-9 5-103953-9 5-103952-9 5-103951-9 5-103950-9 104503-9
11 2.200 [55.88] 1.098 [27.89] 2 6-103955-0 6-103954-0 6-103953-0 6-103952-0 6-103951-0 6-103950-0 1-104503-0
12 2.400 [60.96] 1.198 [30.43] 2 6-103955-1 6-103954-1 6-103953-1 6-103952-1 6-103951-1 6-103950-1 1-104503-1
240
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Coupling Shrouds
5Pin Assembly,
Shrouded
Polarized/Latching
(Refer to pages
236 & 237)
Receptacle
Assemblies with Guide
Ribs (Refer to pages
232, 233, 235)
Headers, Polarized/Latching,
Straight and Right Angle Post,
with or without Holddown
(See pages 244-252)
Single-Row
Material
Black thermoplastic, 94V-0 rated
Single-Row
Coupling Shroud
.582
[14.78]
A.307
[7.80]
Pin Assemblies with Guide
Ribs, Installed in Panel
Mount Pin Shroud (Refer to
pages 238, 239 & 242)
No. of Dimension Single-Row
Pos. A Coupling Shroud
4.485 [12.32] 103680-1
5.585 [14.86] 103680-2
6.685 [17.40] 103680-3
7.785 [19.94] 103680-4
8.885 [22.48] 103680-5
9.985 [25.02] 103680-6
10 1.085 [27.56] 103680-7
11 1.185 [30.10] 103680-8
12 1.285 [32.64] 103680-9
13 1.385 [35.18] 1-103680-0
14 1.485 [37.72] 1-103680-1
No. of Dimension Single-Row
Pos. A Coupling Shroud
15 1.585 [40.26] 1-103680-2
16 1.685 [42.80] 1-103680-3
17 1.785 [45.34] 1-103680-4
18 1.885 [47.88] 1-103680-5
19 1.985 [50.42] 1-103680-6
20 2.085 [52.96] 1-103680-7
21 2.185 [55.50] 1-103680-8
22 2.285 [58.04] 1-103680-9
23 2.385 [60.58] 2-103680-0
24 2.485 [63.12] 2-103680-1
25 2.585 [65.66] 2-103680-2
Typical Application of Single-Row Coupling Shroud and Mating AMPMODU MTE Products
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
241
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Coupling Shrouds
5
AMPMODU Shrouded
Headers Double-Row, Straight
or Right–Angle Post1
Receptacle
Assemblies with Guide
Ribs (Refer to pages
232, 233 & 235)
1Mating AMPMODU Double-Row Shrouded Headers must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline
1of last post to inside of end shroud wall.
Double-Row
Material
Black thermoplastic, 94V-0 rated
Double-Row
Coupling Shroud
.735
[18.67]
A
Position No. 1
Identification
No. of Dimension Double-Row
Pos. A Coupling Shroud
8.585 [14.86] 103681-1
10 .685 [17.40] 103681-2
12 .785 [19.94] 103681-3
14 .885 [22.48] 103681-4
16 .985 [25.02] 103681-5
18 1.085 [27.56] 104500-1
20 1.185 [30.10] 104500-2
22 1.285 [32.64] 104500-3
24 1.385 [35.18] 104500-4
26 1.485 [37.72] 104500-5
28 1.585 [40.26] 104500-6
30 1.685 [42.80] 104500-7
32 1.785 [45.34] 104500-8
34 1.885 [47.88] 104500-9
40 2.185 [55.50] 1-104500-0
50 2.685 [68.20] 1-104500-1
Typical Application of Double-Row Coupling Shroud and Mating AMPMODU Products
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
242
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Panel Mount Pin Shrouds for MTE Pin Assemblies
with Guide Ribs, Single-Row
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Panel Mount
Pin Shrouds
5
Material
Black thermoplastic, 94V-0 rated
.990
[25.15]
A
Position No. 1
Identification
No. of Dimensions Panel Mount
Pos. AB
Pin Shroud
2.735 [18.67] .625 [15.88] 103682-1
3.835 [21.21] .725 [18.42] 103682-2
4.935 [23.75] .825 [20.96] 103682-3
51.035 [26.29] .925 [23.50] 103682-4
61.135 [28.83] 1.025 [26.04] 103682-5
71.235 [31.37] 1.125 [28.58] 103682-6
81.335 [33.91] 1.225 [31.12] 103682-7
91.435 [36.45] 1.325 [33.66] 103682-8
10 1.535 [38.99] 1.425 [36.20] 103682-9
11 1.635 [41.53] 1.525 [38.74] 1-103682-0
12 1.735 [44.07] 1.625 [41.28] 1-103682-1
13 1.835 [46.61] 1.725 [43.82] 1-103682-2
.250
[6.35]
.310
[7.87]
.320
[8.13]
.270
[6.86]
.320
[8.13]
B
No. of Dimensions Panel Mount
Pos. AB
Pin Shroud
14 1.935 [49.15] 1.825 [46.36] 1-103682-3
15 2.035 [51.69] 1.925 [48.90] 1-103682-4
16 2.135 [54.23] 2.025 [51.44] 1-103682-5
17 2.235 [56.77] 2.125 [53.98] 1-103682-6
18 2.335 [59.31] 2.225 [56.52] 1-103682-7
19 2.435 [61.85] 2.325 [59.06] 1-103682-8
20 2.535 [64.39] 2.425 [61.60] 1-103682-9
21 2.635 [66.93] 2.525 [64.14] 2-103682-0
22 2.735 [69.47] 2.625 [66.68] 2-103682-1
23 2.835 [72.01] 2.725 [69.22] 2-103682-2
24 2.935 [74.55] 2.825 [71.76] 2-103682-3
25 3.035 [77.09] 2.925 [74.30] 2-103682-4
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
243
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Panel Mount Pin Shrouds for MTE Pin Assemblies
with Guide Ribs, Single-Row (Continued)
AMPMODU Interconnection System
MTE Panel Mount
Pin Shrouds
5
Material
Black thermoplastic, 94V-0 rated
Typical Application of Panel Mount Pin Shroud and Mating AMPMODU Products
Pin Assembly with
Guide Ribs (Refer to
pages 238 & 239)
Receptacle Assemblies with Guide
Ribs, Installed in
Single-Row Coupling Shroud
(Refer to pages 232, 233, 235 & 240)
Receptacle Assembly,
Polarized/Latching (Refer
to pages 230 & 231)
Panel Mount
Pin Shroud
Rear of Panel
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
244
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Headers, Shrouded Polarized/Latching,
Single-Row .100 [2.54] Centerline
AMPMODU Interconnection System
MTE Headers
5
.025 [0.64] Square
Straight Post (With or
Without Swaged Tail)
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
post
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
pages 232, 233, 235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
.060
[1.52]
.535
[13.59]
Position No. 1 Indicator
.120
[3.05]
.200
[5.08]
.130
[3.30]
.060
[1.52]
.100
[2.54]
.100
[2.54] Ty p .
.200
[5.08] Ref.
(Contact Area)
.230
[5.84]
.350
[8.89]
*±.003 [±0.08]; tolerances not to accumulate within one connector pattern.
Note: Swaged retention tails are provided in a minimum of two locations per header.
Recommended PC Board Hole Layout
.035±.003 Dia. Typ.
[0.89±0.08]
or
.040±.003 Dia. Typ.
[1.02±0.08]
(for Retention Tails)
A
B
C
X
X
.275
[6.98]
.100*
[2.54] Ty p .
C
Swaged Retention Tail
(See Note)
Section X-X
245
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Headers, Shrouded Polarized/Latching,
Single-Row .100 [2.54] Centerline (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Headers
5
No. of Dimensions Polarized/Latching Header With Swage Polarized/Latching Header Without Swage
Pos. A B C Plating A Plating B Plating C Plating A Plating B Plating C
2.300 [7.62] .220 [5.59] .100 [2.54] 5-103908-1 5-104362-1 5-103669-1 5-103735-1 5-104363-1 5-103639-1
3.400 [10.16] .320 [8.13] .200 [5.08] 5-103908-2 5-104362-2 5-103669-2 5-103735-2 5-104363-2 5-103639-2
4.500 [12.70] .420 [10.67] .300 [7.62] 5-103908-3 5-104362-3 5-103669-3 5-103735-3 5-104363-3 5-103639-3
5.600 [15.24] .520 [13.21] .400 [10.16] 5-103908-4 5-104362-4 5-103669-4 5-103735-4 5-104363-4 5-103639-4
6.700 [17.78] .620 [15.75] .500 [12.70] 5-103908-5 5-104362-5 5-103669-5 5-103735-5 5-104363-5 5-103639-5
7.800 [20.32] .720 [18.29] .600 [15.24] 5-103908-6 5-104362-6 5-103669-6 5-103735-6 5-104363-6 5-103639-6
8.900 [22.86] .820 [20.83] .700 [17.78] 5-103908-7 5-104362-7 5-103669-7 5-103735-7 5-104363-7 5-103639-7
91.000 [25.40] .920 [23.37] .800 [20.32] 5-103908-8 5-104362-8 5-103669-8 5-103735-8 5-104363-8 5-103639-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-103908-9 5-104362-9 5-103669-9 5-103735-9 5-104363-9 5-103639-9
11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-103908-0 6-104362-0 6-103669-0 6-103735-0 6-104363-0 6-103639-0
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-103908-1 6-104362-1 6-103669-1 6-103735-1 6-104363-1 6-103639-1
13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 6-103908-2 6-104909-2 6-103669-2 6-103735-2 6-104910-2 6-103639-2
14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02] 6-103908-3 6-104909-3 6-103669-3 6-103735-3 6-104910-3 6-103639-3
15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56] 6-103908-4 6-104909-4 6-103669-4 6-103735-4 6-104910-4 6-103639-4
16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 6-103908-5 6-104909-5 6-103669-5 6-103735-5 6-104910-5 6-103639-5
17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64] 6-103908-6 6-104909-6 6-103669-6 6-103735-6 6-104910-6 6-103639-6
18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18] 6-103908-7 6-104909-7 6-103669-7 6-103735-7 6-104910-7 6-103639-7
19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 6-103908-8 6-104909-8 6-103669-8 6-103735-8 6-104910-8 6-103639-8
20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 6-103908-9 6-104909-9 6-103669-9 6-103735-9 6-104910-9 6-103639-9
21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80] 7-103908-0 7-104909-0 7-103669-0 7-103735-0 7-104910-0 7-103639-0
22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34] 7-103908-1 7-104909-1 7-103669-1 7-103735-1 7-104910-1 7-103639-1
23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 7-103908-2 7-104909-2 7-103669-2 7-103735-2 7-104910-2 7-103639-2
24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 7-103908-3 7-104909-3 7-103669-3 7-103735-3 7-104910-3 7-103639-3
25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 7-103908-4 7-104909-4 7-103669-4 7-103735-4 7-104910-4 7-103639-4
Notes: 1. Selectively loaded headers are available, consult Tyco Electronics.
2. Use Keying Tool No. 91417-1 to remove post for keying.
246
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline
AMPMODU Interconnection System
MTE Headers
5
.025 [0.64] Square
Right-Angle Post
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
post
Recommended PC Board Hole Layout
*±.003 [±0.08]; tolerance not to accumulate within one connector pattern.
Recommended PC Board Hole Layout
(PC board thickness (for Holddown Feature) is .062±.008 [1.57±0.20])
*±.003 [±0.08]; tolerance not to accumulate within one connector pattern.
.535
[13.59]
With Holddown
.060
[1.52]
.120
[3.05]
.200
[5.08]
.130
[3.30]
.060
[1.52]
.100
[2.54]
.100
[2.54] Ty p . .200
[5.08] Ref.
(Contact Area)
.230
[5.84]
.350
[8.89]
A
B
C
X
X
.275
[6.99]
.365
[9.27]
.145
[3.68]
.100*
[2.54] Ty p .
.340±.003
[8.64±0.08] Ty p . .055±.003
[1.40±0.08] Ty p .
C
.035±.003
[0.89±0.08] Dia. Typ.
.134±.003
[3.40±0.08] Dia.
(2 Plc.)
.535
[13.59]
.060
[1.52]
.120
[3.05]
.200
[5.08]
.130
[3.30]
.060
[1.52]
.100
[2.54]
.100
[2.54] Ty p .
.200
[5.08] Ref.
(Contact Area)
.230
[5.84]
.350
[8.89]
A
B
C
X
X
.275
[6.99]
.145
[3.68]
.100*
[2.54] Ty p .
C
.035±.003
[0.89±0.08] Dia. Typ.
Section X-X
Section X-X
Position No. 1 Indicator
Position No. 1 Indicator
Without Holddown
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies
(Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
pages 232, 233, 235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
247
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Headers
5
No. of Dimensions Latching Header With Hold Down Latching Header Without Hold Down
Pos. A B C Plating A Plating B Plating C Plating A Plating B Plating C
2.300 [7.62] .220 [5.59] .100 [2.54] 5-103904-1 5-103673-1 5-103672-1 5-104935-5 5-103635-1 5-103634-1
3.400 [10.16] .320 [8.13] .200 [5.08] 5-103904-2 5-103673-2 5-103672-2 5-104935-3 5-103635-2 5-103634-2
4.500 [12.70] .420 [10.67] .300 [7.62] 5-103904-3 5-103673-3 5-103672-3 5-104935-1 5-103635-3 5-103634-3
5.600 [15.24] .520 [13.21] .400 [10.16] 5-103904-4 5-103673-4 5-103672-4 5-104935-6 5-103635-4 5-103634-4
6.700 [17.78] .620 [15.75] .500 [12.70] 5-103904-5 5-103673-5 5-103672-5 5-104935-7 5-103635-5 5-103634-5
7.800 [20.32] .720 [18.29] .600 [15.24] 5-103904-6 5-103673-6 5-103672-6 5-104935-8 5-103635-6 5-103634-6
8.900 [22.86] .820 [20.83] .700 [17.78] 5-103904-7 5-103673-7 5-103672-7 5-104935-2 5-103635-7 5-103634-7
91.000 [25.40] .920 [23.37] .800 [20.32] 5-103904-8 5-103673-8 5-103672-8 5-104935-9 5-103635-8 5-103634-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-103904-9 5-103673-9 5-103672-9 6-104935-0 5-103635-9 5-103634-9
11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-103904-0 6-103673-0 6-103672-0 6-104935-1 6-103635-0 6-103634-0
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-103904-1 6-103673-1 6-103672-1 5-104935-4 6-103635-1 6-103634-1
13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 6-103904-2 6-103673-2 6-103672-2 6-104935-2 6-103635-2 6-103634-2
14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02] 6-103904-3 6-103673-3 6-103672-3 6-104935-3 6-103635-3 6-103634-3
15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56] 6-103904-4 6-103673-4 6-103672-4 6-104935-4 6-103635-4 6-103634-4
16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 6-103904-5 6-103673-5 6-103672-5 6-104935-5 6-103635-5 6-103634-5
17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64] 6-103904-6 6-103673-6 6-103672-6 6-104935-6 6-103635-6 6-103634-6
18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18] 6-103904-7 6-103673-7 6-103672-7 6-104935-7 6-103635-7 6-103634-7
19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 6-103904-8 6-103673-8 6-103672-8 6-104935-8 6-103635-8 6-103634-8
20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 6-103904-9 6-103673-9 6-103672-9 6-104935-9 6-103635-9 6-103634-9
21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80] 7-103904-0 7-103673-0 7-103672-0 7-104935-0 7-103635-0 7-103634-0
22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34] 7-103904-1 7-103673-1 7-103672-1 7-104935-1 7-103635-1 7-103634-1
23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 7-103904-2 7-103673-2 7-103672-2 7-104935-2 7-103635-2 7-103634-2
24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 7-103904-3 7-103673-3 7-103672-3 7-104935-3 7-103635-3 7-103634-3
25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 7-103904-4 7-103673-4 7-103672-4 7-104935-4 7-103635-4 7-103634-4
Notes: 1. Selectively loaded headers are available, consult Tyco Electronics.
2. Use Keying Tool No. 91417-1 to remove post for keying.
248
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Headers
5
.025 [0.64] Square Straight
Post (With Swaged Tails
and PC Board Orientation)
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated .000100
[0.00254] tin over .000050 [0.00127]
nickel on entire post
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
pages 232, 233, 235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
.535
[13.59]
.120
[3.05]
.100*
[2.54]
X
X
A
.260
[6.60]
Ty p .
No. of Dimensions Latching
Pos. ABC Header
2.300 [7.62] .220 [5.59] .100 [2.54] 5-104450-1
3.400 [10.16] .320 [8.13] .200 [5.08] 5-104450-2
4.500 [12.70] .420 [10.67] .300 [7.62] 5-104450-3
5.600 [15.24] .520 [13.21] .400 [10.16] 5-104450-4
6.700 [17.78] .620 [15.75] .500 [12.70] 5-104450-5
7.800 [20.32] .720 [18.29] .600 [15.24] 5-104450-6
8.900 [22.86] .820 [20.83] .700 [17.78] 5-104450-7
91.000 [25.40] .920 [23.37] .800 [20.32] 5-104450-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-104450-9
Section X-X
.060
[1.52]
(2 Plc.)
.200
[5.08]
B
C
.060
[1.52] .100
[2.54]
Ty p .
.050
[1.27]
.100
[2.54]
.070
[1.78]
.050
[1.27]
Dia.
C
.065±.003
[1.65±0.08] Dia.
.135±.003
[3.43±0.08]
.075±.003
[1.91±0.08]
.040±.003 Dia. Typ.
[1.02±0.08]
(for Retention Tails)
.230
[5.84] .130
[3.30]
.350
[8.89]
Swaged Retention Tail
(See Note)
*±.003 [±0.08]; tolerances not to accumulate within one connector pattern.
Note: Swaged retention tails are provided in a minimum of two locations per header.
Recommended PC Board Hole Layout
Position No. 1 Indicator
249
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Headers, Through-hole, Surface Mount Compatible,
Shrouded Polarized/Latching, Single-Row .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Headers
5
.025 [0.64] Square Straight
Post (With Swaged Tails
and PC Board Orientation)
.120
[3.05] .100
[2.54] .130
[3.30]
.060
[1.52]
.230
[5.84]
.060
[1.52]
.535
[13.59]
B
C
X
X
.262
[6.65]
.350
[8.89]
.200
[5.08] Ref.
Ty p .
No. of Dimensions Polarized/Latching
Pos. ABC
Header, High-Temp
2.300 [7.62] .220 [5.59] .100 [2.54] 5-104809-1
3.400 [10.16] .320 [8.13] .200 [5.08] 5-104809-2
4.500 [12.70] .420 [10.67] .300 [7.62] 5-104809-3
5.600 [15.24] .520 [13.21] .400 [10.16] 5-104809-4
6.700 [17.78] .620 [15.75] .500 [12.70] 5-104809-5
7.800 [20.32] .720 [18.29] .600 [15.24] 5-104809-6
8.900 [22.86] .820 [20.83] .700 [17.78] 5-104809-7
91.000 [25.40] .920 [23.37] .800 [20.32] 5-104809-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-104809-9
11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-104809-0
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-104809-1
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min tin on solder tail, with
entire post underplated .000050
[0.00127] nickel
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
pages 232, 233, 235, 240
Receptacle Assemblies (Polarized
Latching) — pages 230, 231
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Section X-X
A
(Contact Area)
.100
[2.54]
.200
[5.08]
.100*
[2.54] Ty p .
Swaged Retention Tail
(See Note)
Position No. 1 Indicator
.020±.002
[0.51±0.05]
Ty p .
Header Profile (Shown for
orientation purposes only)
.040±.002
[1.02±0.05] Ty p .
.040±.003 Dia. Typ.
[1.02±0.08]
Plated-Thru Hole
Recommended PC Board Hole Layout
(Stencil Thickness = .010 [0.25])
*±.003 [±0.08] tolerance not to accumulate within one connector pattern
.135±.003
[3.43±0.08]
.065±.003
[1.65±0.08]
.075±.003
[1.90±0.08]
.180±.002
[4.57±0.05]
250
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Headers, Polarized/Latching, Through-Hole,
Surface Mount Compatible, Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Headers
5
Section X-X
B
X
.535
[13.59]
A
.262
[6.65]
.200
[5.08] Ref.
(Contact Area)
.060
[1.52]
(2 Plc.)
.120
[3.05]
.060
[1.52]
.100
[2.54]
.180
[4.57]
.350
[8.89] .145
[3.68]
.230
[5.84]
.100*
[2.54] Ty p .
.058±.003
[1.47±0.08]
(2 Plc.)
.340±.003
[8.64±0.08] .090±.002
[2.29±0.05]
.035±.003 Dia. Typ.
[0.89±0.08]
Plated-Thru Hole
*±.003 [±0.08]; tolerance is not to accumulate within one connector pattern.
Recommended PC Board
(Stencil Thickness = .010 [0.25])
.025 [0.64] Square
Right-Angle Post (With
Holddown)
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder tail, with
entire post underplated .000050
[0.00127] nickel
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies (Polarized/
Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
X
C
.100
[2.54] Ty p .
.093+.003
.093-.000
2.36+0.08
.093
-.000
.145
[3.68]
.200
[5.08]
.070±.002
[1.78±0.51] Ty p .
Dia.
(2 Plc.)
][
C
No. of Dimensions Right-Angle
Header
Pos. ABC
with Hold Down
2.300 [7.62] .220 [5.59] .100 [2.54] 5-104361-1
3.400 [10.16] .320 [8.13] .200 [5.08] 5-104361-2
4.500 [12.70] .420 [10.67] .300 [7.62] 5-104361-3
5.600 [15.24] .520 [13.21] .400 [10.16] 5-104361-4
6.700 [17.78] .620 [15.75] .500 [12.70] 5-104361-5
7.800 [20.32] .720 [18.29] .600 [15.24] 5-104361-6
8.900 [22.86] .820 [20.83] .700 [17.78] 5-104361-7
91.000 [25.40] .920 [23.37] .800 [20.32] 5-104361-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-104361-9
11 1.200 [30.48] 1.120 [28.44] 1.000 [25.40] 6-104361-0
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-104361-1
13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 6-104361-2
No. of Dimensions Right-Angle
Header
Pos. ABC
with Hold Down
14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02] 6-104361-3
15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56] 6-104361-4
16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 6-104361-5
17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64] 6-104361-6
18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18] 6-104361-7
19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 6-104361-8
20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 6-104361-9
21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80] 7-104361-0
22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34] 7-104361-1
23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 7-104361-2
24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 7-104361-3
25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 7-104361-4
Position No. 1 Indicator
251
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers
5
Note: All part numbers are RoHS
compliant.
No. of Dimensions Right-Angle Latching SMT Headers
Pos. A B C D E Plating A Plating B Plating C
2.400 [10.16] .220 [5.59] .100 [2.54] .140 [3.56] .290 [7.37] 5-147323-1 5-147278-1 5-147324-1
3.500 [12.70] .320 [8.13] .200 [5.08] .190 [4.83] .390 [9.91] 5-147323-2 5-147278-2 5-147324-2
4.600 [15.24] .420 [10.67] .300 [7.62] .240 [6.10] .490 [12.45] 5-147323-3 5-147278-3 5-147324-3
5.700 [17.78] .520 [13.21] .400 [10.16] .290 [7.37] .590 [14.99] 5-147323-4 5-147278-4 5-147324-4
6.800 [20.32] .620 [15.75] .500 [12.70] .340 [8.64] .690 [17.53] 5-147323-5 5-147278-5 5-147324-5
7.900 [22.86] .720 [18.29] .600 [15.24] .390 [9.91] .790 [20.07] 5-147323-6 5-147278-6 5-147324-6
81.000 [25.40] .820 [20.83] .700 [17.78] .440 [11.18] .890 [22.61] 5-147323-7 5-147278-7 5-147324-7
91.100 [27.94] .920 [23.37] .800 [20.32] .490 [12.45] .990 [25.15] 5-147323-8 5-147278-8 5-147324-8
10 1.200 [30.48] 1.020 [25.91] .900 [22.86] .540 [13.72] 1.090 [27.69] 5-147323-9 5-147278-9 5-147324-9
11 1.300 [33.02] 1.120 [28.45] 1.000 [25.40] .590 [14.99] 1.190 [30.23] 6-147323-0 6-147278-0 6-147324-0
12 1.400 [35.56] 1.220 [30.99] 1.100 [27.94] .640 [16.26] 1.290 [32.77] 6-147323-1 6-147278-1 6-147324-1
13 1.500 [38.10] 1.320 [33.53] 1.200 [30.48] .690 [17.53] 1.390 [35.31] 6-147323-2 6-147278-2 6-147324-2
14 1.600 [40.64] 1.420 [36.07] 1.300 [33.02] .740 [18.80] 1.490 [37.85] 6-147323-3 6-147278-3 6-147324-3
15 1.700 [43.18] 1.520 [38.61] 1.400 [35.56] .790 [20.07] 1.590 [40.39] 6-147323-4 6-147278-4 6-147324-4
16 1.800 [45.72] 1.620 [41.15] 1.500 [38.10] .840 [21.34] 1.690 [42.93] 6-147323-5 6-147278-5 6-147324-5
17 1.900 [48.26] 1.720 [43.69] 1.600 [40.64] .890 [22.61] 1.790 [45.47] 6-147323-6 6-147278-6 6-147324-6
18 2.000 [50.80] 1.820 [46.23] 1.700 [43.18] .940 [23.88] 1.890 [48.01] 6-147323-7 6-147278-7 6-147324-7
19 2.100 [53.34] 1.920 [48.77] 1.800 [45.72] .990 [25.15] 1.990 [50.55] 6-147323-8 6-147278-8 6-147324-8
20 2.200 [55.88] 2.020 [51.31] 1.900 [48.26] 1.040 [26.42] 2.090 [53.09] 6-147323-9 6-147278-9 6-147324-9
21 2.300 [58.42] 2.120 [53.85] 2.000 [50.80] 1.090 [27.69] 2.190 [55.63] 7-147323-0 7-147278-0 7-147324-0
22 2.400 [60.96] 2.220 [56.39] 2.100 [53.34] 1.140 [28.96] 2.290 [58.17] 7-147323-1 7-147278-1 7-147324-1
23 2.500 [63.50] 2.320 [58.93] 2.200 [55.88] 1.190 [30.23] 2.390 [60.71] 7-147323-2 7-147278-2 7-147324-2
24 2.600 [66.04] 2.420 [61.47] 2.300 [58.42] 1.240 [31.50] 2.490 [63.25] 7-147323-3 7-147278-3 7-147324-3
25 2.700 [68.58] 2.520 [64.01] 2.400 [60.96] 1.290 [32.77] 2.590 [65.79] 7-147323-4 7-147278-4 7-147324-4
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Brass, plated as follows:
Plating A — Duplex plated .000030
[.00076] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating B — Duplex plated .000015
[.00038] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating C — .000100 [.00254] tin over
.000050 [.00127] nickel on entire post
Recommended
PC Board Layout
(Refer to MTE Application Spec.
114-25026 for Stencil Aperture Layout
Using .006 [0.152] or .008 [0.203]
Stencil Thickness)
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies (Polarized/
Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
.535
[13.59]
.140
[3.56]
.165±.003
[4.19±0.07]
.133
[3.38]
.265
[6.73]
D
E
C
.070±.002 Ty p
[1.78±0.05]
.054/.039
[1.37/0.99]
Ø.085±.002
[2.16±0.05]
.136±.001
[3.45±0.02]
2 Plc
.190±.001
[4.83±0.02]
2 Plc
.065 Min Pad on
[1.65] Underside 2 Plc
.038 2 Plc
[0.97]
.120
[3.05]
A
B
C
K
K
.120
[3.05]
.350
[8.89]
.200
[5.08] Ref
Contact Area
.200
[5.08] .002
[0.05]
See L
View L
.076
[1.93]
.288
[7.32]
Ref
.262
[6.65]
.457
[11.61]
Ref
Position No. 1 Indicator
Ø.047 + .002
-.003
[1.19 + 0.05
- 0.07]
.140±.002
[3.56±0.05]
(Tangent
of heel)
(Plated thru hole)
.025
[0.64] Ty p .
Section K-K
Recommended PC Board Layout
MTE Headers, Right-Angle, Polarized/Latching, Surface Mount
252
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Headers, Vertical, Polarized/Latching, Surface Mount
AMPMODU Interconnection System
MTE Headers
5
.075
[1.90]
.535
[13.59]
.063
[1.52]
E
.025 Typ.
[0.62]
.313
[7.62]
A
B
K
K
.025
[0.64] Typ.
.100
[2.54]
.200
[5.08]
.120
[3.05]
.230
[5.84]
Pick and Place Cap
Position No. 1 Indicator
Position No. 1
.100
[2.54] Ty p .
.055±.003
[1.40±0.08]
Ø .052 + .002
– .003
[1.32 + 0.05
– 0.07]
.070±.002
[1.78±0.05]
.088±.003
[2.25±0.08]
D
C0.06
[1.53]
.113
[2.88]
.227
[5.76]
No. of Dimensions Vertical SMT Headers
Pos. A B C D E Plating A Plating B Plating C
2.300[7.62] .220[5.59] .100[2.54] .220[5.60] .110[2.80] 5-1375583-1 5-1375582-1 5-1375549-1
3.400[10.16] .320[8.13] .200[5.08] .320[8.14] .160[4.07] 5-1375583-2 5-1375582-2 5-1375549-2
4.500[12.70] .420[10.67] .300[7.62] .420[10.68] .210[5.34] 5-1375583-3 5-1375582-3 5-1375549-3
5.600[15.24] .520[13.21] .400[10.16] .520[13.22] .260[6.61] 5-1375583-4 5-1375582-4 5-1375549-4
6.700[17.78] .620[15.75] .500[12.70] .620[15.76] .310[7.88] 5-1375583-5 5-1375582-5 5-1375549-5
7.800[20.32] .720[18.29] .600[15.24] .720[18.30] .360[9.15] 5-1375583-6 5-1375582-6 5-1375549-6
8.900[22.86] .820[20.83] .700[17.78] .820[20.84] .410[10.42] 5-1375583-7 5-1375582-7 5-1375549-7
91.000[25.40] .920[23.37] .800[20.32] .920[23.38] .460[11.69] 5-1375583-8 5-1375582-8 5-1375549-8
10 1.100[27.94] 1.020[25.91] .900[22.86] 1.020[25.92] .510[12.96] 5-1375583-9 5-1375582-9 5-1375549-9
11 1.200[30.48] 1.120[28.45] 1.000[25.40] 1.120[28.46] .560[14.23] 6-1375583-0 6-1375582-0 6-1375549-0
12 1.300[33.02] 1.220[30.99] 1.100[27.94] 1.220[31.00] .610[15.50] 6-1375583-1 6-1375582-1 6-1375549-1
13 1.400[35.56] 1.320[33.53] 1.200[30.48] 1.320[33.54] .660[16.77] 6-1375583-2 6-1375582-2 6-1375549-2
14 1.500[38.10] 1.420[36.07] 1.300[33.02] 1.420[36.08] .710[18.04] 6-1375583-3 6-1375582-3 6-1375549-3
15 1.600[40.64] 1.520[38.61] 1.400[35.56] 1.520[38.62] .760[19.31] 6-1375583-4 6-1375582-4 6-1375549-4
16 1.700[43.18] 1.620[41.15] 1.500[38.10] 1.620[41.16] .810[20.58] 6-1375583-5 6-1375582-5 6-1375549-5
17 1.800[45.72] 1.720[43.69] 1.600[40.64] 1.720[43.70] .860[21.85] 6-1375583-6 6-1375582-6 6-1375549-6
18 1.900[48.26] 1.820[46.23] 1.700[43.18] 1.820[46.24] .910[23.12] 6-1375583-7 6-1375582-7 6-1375549-7
19 2.000[50.80] 1.920[48.77] 1.800[45.72] 1.920[48.78] .960[24.39] 6-1375583-8 6-1375582-8 6-1375549-8
20 2.100[53.34] 2.020[51.31] 1.900[48.26] 2.020[51.32] 1.010[25.66] 6-1375583-9 6-1375582-9 6-1375549-9
21 2.200[55.88] 2.120[53.85] 2.000[50.80] 2.120[53.86] 1.060[26.93] 7-1375583-0 7-1375582-0 7-1375549-0
22 2.300[58.42] 2.220[56.39] 2.100[53.34] 2.220[56.40] 1.110[28.20] 7-1375583-1 7-1375582-1 7-1375549-1
23 2.400[60.96] 2.320[58.93] 2.200[55.88] 2.320[58.94] 1.160[29.47] 7-1375583-2 7-1375582-2 7-1375549-2
24 2.500[63.50] 2.420[61.47] 2.300[58.42] 2.420[61.48] 1.210[30.74] 7-1375583-3 7-1375582-3 7-1375549-3
25 2.600[66.04] 2.520[64.01] 2.400[60.96] 2.520[64.02] 1.260[32.01] 7-1375583-4 7-1375582-4 7-1375549-4
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Brass, plated as follows:
Plating A — Duplex plated .000030
[.00076] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating B — Duplex plated .000015
[.00038] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating C — .000100 [.00254] tin
over .000050 [.00127] nickel on entire
post
Recommended
PC Board Layout
(Refer to MTE Application Spec.
114-25026 for Stencil Aperature Layout
using .006 [0.152] or .008 [0.203]
stencil thickness
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies (Polarized/
Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Ø
Plated Thru-Hole
Section K-K
Note: All part numbers are RoHS
compliant.
Recommended PC Board Layout
253
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Interchangeable Contacts, Wire Crimp (Snap-In)
AMPMODU Interconnection System
MTE Headers
5
Material and Finish
Copper alloy C7025, plated as follows:
Plating A — Duplex plated .000030
[0.00076] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating B — Duplex plated .000015
[0.00038] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating C — .000100 [0.00254] min.
tin over .000050 [0.00127] min. nickel
on entire contact
.068
[1.73]
CC
.060
[1.52]
.460
[11.68]
Section C - C
.012
[0.30]
Gap
Heavy Duty Miniature
Wire Size Applicator for
Applicator for
Range Ins.
Finish
Contact Part No. AMP-O-MATIC Hand
AWG [mm2]
Dia. (Standard Pressure) AMP-O-LECTRIC Stripper/Crimper Tool
Range Strip Form Loose Piece Machine* Machine Nos.
.025-.060 Plating A 1-104481-1 1-104481-3
32-28 0.03-0.08 0.64-1.52 Plating B 1-104481-0 1-104481-2 567296-2 466980-1 91518-1
Plating C 5-104481-2 5-104481-6
.025-.060 Plating A 1-104480-3 1-104480-6
26-22 0.13-0.3 0.64-1.52 Plating B 1-104480-2 1-104480-5 567297-2 466981-1 91518-1
Plating C 1-104480-7 1-104480-4
.025-.060 Plating A 1-104479-0 1-104479-3
24-20 0.2-0.5 0.64-1.52 Plating B 104479-9 1-104479-2 567298-2 466982-1 91551-1
Plating C 104479-8 1-104479-1
*For use with Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the Model “G” machines (shown
on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts.
Keying Plug
Part No. 104072-1
Ten plugs are supplied per strip.
Order quantity reflects the number
of strips required.
Extraction/Lance Reset
Tool No. 843477-1
Short Point Receptacles
Related Product Data
Performance Characteristics —
page 221
Housings used in —
Short Point—pages 223, 224
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling—
pages 270-272
Technical Documents —
pages 277, 278
Product Specification
108-1472, 108-1472-1
Application Specification
114-25038
Note: All part numbers are RoHS compliant.
254
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Interchangeable Contacts, Wire Crimp (Snap-In) (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Contacts
5
Material and Finish
Phosphor bronze, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000030
[0.00076] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000030
[0.00076] min. tin on solder area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Extraction/Lance Reset
Tool No. 843477-1
Contact Heavy Duty Applicator for
Wire Size Ins. Dia. Part No. Miniature Applicator AMP-O-MATIC Hand
Range Range Finish (Standard Pressure) for AMP-O-LECTRIC Stripper/ Tool
AWG [mm2] Strip Loose Machine* Crimper Nos.
Form Piece Machine
.025-.054 Plating A 5-104506-6 5-104506-7
32-28 0.03-0.08 0.64-1.37 Plating B 5-104506-4 5-104506-5 — — 58342-2
Plating C 5-104506-2 5-104506-3
.036-.054 Plating A 5-104505-6 5-104505-7
26-22 0.14-0.32 0.91-1.37 Plating B 5-104505-4 5-104505-5 567239-2 466983-1 91531-1
Plating C 5-104505-2 5-104505-3
*For use with AMP-O-LECTRIC Model “K” machines. Call Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts.
.025
[0.64]
.810
[20.57]
.025
[0.64]
Pins
Related Product Data
Performance Characteristics —
page 221
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling —
pages 270-272
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
255
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
MT and Shielded MT Interconnection System
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MT and Shielded MT
Interconnection System
5
Wire-to-Board
5-102398-8 D-R Assembly
102396-8 Hermaphroditic Covers
5-102398-8 D-R Assembly
102396-8 Hermaphroditic Covers
5-102398-8 D-R Assembly
102537-8 Ejection Cover
102536-8 Back Cover
5-102398-8 D-R Assembly
102681-5 Latching Cover
102536-8 Back Cover
5-102398-8 D-R Assembly
102540-8 Polarizing Cover
102536-8 Back Cover
5-102398-8 D-R Assembly
102541-8 Non-Polarizing Cover
102536-8 Back Cover
102185-2 Latch
5102154-4 Header
5-103168-8 Hdr
5-103166-8 Header
5-103166-8 Header
Performance
Characteristics
Contact Current Rating —
3 amperes for single contact in free air.
(Amperage could vary due to ambient
temperature, wire size and duty cycles.)
Operating Temperature —
-65°C to +105°C
Termination Resistance —
12 milliohms max.
Max. Mating Force —
High pressure - 26 oz. [7.23 N]
Standard pressure - 9 oz. [2.50 N]
Min. Unmating Force —
High pressure — 5 oz. [1.39 N]
Standard pressure — 1.5 oz. [0.417 N]
Contact Retention in Housing —
5 lb. [22.24 N] per contact min.
Product Facts
■Full line of mass
termination tooling offers
lowest installed cost for
most production needs
■Dual cantilever beams with
anti-overstress features
provide redundant contact
of mating post and limit
beam deflection, preventing
permanent deformation
■Redundant insulation
displacement slots provide
for maximum reliability
■Integral wire strain relief
on contact can prevent wire
motion from being
transmitted to wire
termination areas
■Built-in contact post stop
can protect terminated wire
from being disturbed by
over-insertion of mating
post, prevents wire from
entering contact area and
positively limits mating
connector depth
■Insulation displacement
contacts and crimp,
snap-in contacts are
interchangeable
■Complete serviceability
with replacement contacts
■Cover styles include
low profile (polarized,
non-polarized, latching and
ejection) and standard
profile (hermaphroditic
and ejection)
■Connector housings may
be stacked end-to-end
within one pair of covers.
All varieties of covers in
this catalog are suitable for
multiple housing stacking
applications similar to the
example illustrated in the
photograph to the right
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
The AMPMODU MT and
Shielded MT Interconnection
System offers labor and
cost savings through mass
termination technology,
while maintaining the time-
proven reliability of the
AMPMODU product family.
The MT system is comprised
of preloaded, double-row
receptacle assemblies with
snap-on covers and a variety
of shielding hardware and
accessories. The system is
supported by a full line of
mass termination tooling to
meet virtually most produc-
tion needs.
The insulation displacement
contact, the heart of the MT
system, features a mating
interface that is the same as
the conventional AMPMODU
crimp, snap-in contact, fea-
turing dual cantilever beams,
built-in overstress protection
and a completely enclosed
“box” design.
To reduce EMI/ESD (electro-
magnetic interference/
electrostatic discharge) at
the input-output interface,
add-on metal shields can be
used to convert standard
MT connectors to shielded
MT connectors.
Typical Application of End-to-End Stacking
R
R
256
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MT Receptacle Assemblies, Double-Row
.100 x .100 [2.54 x 2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MT Receptacle Assemblies
5
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy, duplex
plated .000030 [0.00076] gold in mating
area, .000050 [0.00127] tin on solder
tail, with entire contact underplated
.000050 [0.00127] nickel
Related Product Data
Mateable Connectors — pages 117,
122, 126, 130, 264
Cable Insulation Wall
Thickness — .015 [0.39] max.
Cable Insulation Diameter —
.050 [1.27] max.
Mating Post Length —
.222-.273 [5.64-6.94] max.
Performance Characteristics —
page 255
Replacement Contacts — page 265
Connector Covers —
pages 258, 259
Application Tooling —
pages 273-275
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
Housings Pre-loaded with
Standard Pressure Contacts
A Max.
1
B
.100
[2.54]
.600
[15.24]
.125
[3.18]
.100
[2.54] Ty p .
.270
[6.86]
Part Nos. (Stamped)
No. of Dimensions Wire Size Range Unloaded
Pos. AB
30-26 AWG 26-22 AWG 22-20 AWG Housings
[0.05-0.15 mm2] [0.12-0.3 mm2] [0.3-0.6 mm2]
6.300 [7.62] .200 [5.08] 5-102393-1 5-102398-1 5-102448-1 102394-1
8.400 [10.16] .300 [7.62] 5-102393-2 5-102398-2 5-102448-2 102394-2
10 .500 [12.70] .400 [10.16] 5-102393-3 5-102398-3 5-102448-3 102394-3
12 .600 [15.24] .500 [12.70] 5-102393-4 5-102398-4 5-102448-4 102394-4
14 .700 [17.78] .600 [15.24] 5-102393-5 5-102398-5 5-102448-5 102394-5
16 .800 [20.32] .700 [17.78] 5-102393-6 5-102398-6 5-102448-6 102394-6
18 .900 [22.86] .800 [20.32] 5-102393-7 5-102398-7 5-102448-7 102394-7
20 1.000 [25.40] .900 [22.86] 5-102393-8 5-102398-8 5-102448-8 102394-8
22 1.100 [27.94] 1.000 [25.40] 5-102393-9 5-102398-9 5-102448-9 102394-9
24 1.200 [30.48] 1.100 [27.94] 6-102393-0 6-102398-0 6-102448-0 1-102394-0
26 1.300 [33.02] 1.200 [30.48] 6-102393-1 6-102398-1 6-102448-1 1-102394-1
28 1.400 [35.56] 1.300 [33.02] 6-102393-2 6-102398-2 6-102448-2 1-102394-2
30 1.500 [38.10] 1.400 [35.56] 6-102393-3 6-102398-3 6-102448-3 1-102394-3
32 1.600 [40.64] 1.500 [38.10] 6-102393-4 6-102398-4 6-102448-4 1-102394-4
34 1.700 [43.18] 1.600 [40.64] 6-102393-5 6-102398-5 6-102448-5 1-102394-5
40 2.000 [50.80] 1.900 [48.26] 6-102393-8 6-102398-8 6-102448-8 1-102394-8
50 2.500 [63.50] 2.400 [60.96] 7-102393-3 7-102398-3 7-102448-3 2-102394-3
60 3.000 [76.20] 2.900 [73.66] 7-102393-8 7-102398-8 7-102448-8 2-102394-8
64 3.200 [81.28] 3.100 [78.74] 8-102393-0 8-102398-0 8-102448-0 3-102394-0
Note: Contact Extraction/Lance Reset Tool No. 843477-3, see page 265.
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Keying Plugs
Part No. 87077-2
(Plugs directly into housing)
11111
1
Circuit No. 1
Identifier
Contact
I.D. No.
.050
[1.27]
.070
[1.78]
.240
[6.10]
Right-Angle
Header
MT Receptacle
Assembly
PC
Board .270
[6.86]
.300
[7.62]
257
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MT Receptacle Assemblies, Double-Row
.100 x .100 [2.54 x 2.54] Centerline (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MT Receptacle Assemblies
5
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy, duplex
plated .000030 [0.00076] gold in mating
area, .000050 [0.00127] tin on solder
tails, with entire contact underplated
.000050 [0.00127] nickel
Related Product Data
Mateable Connectors — pages 117,
122, 126, 130, 264
Cable Insulation Wall
Thickness — .015 [0.39] max.
Cable Insulation Diameter —
.050 [1.27] max.
Mating Post Length —
.200-.273 [5.64-6.94] max.
Performance Characteristics —
page 255
Replacement Contacts — page 265
Connector Covers —
pages 258, 259
Application Tooling —
pages 273-275
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
Housings Pre-loaded with
High Pressure Contacts
A Max.
4
B
.100
[2.54]
.600
[15.24]
.125
[3.18]
.100
[2.54] Ty p .
.270
[6.86]
Part Nos. (Stamped*)
No. of Dimensions Wire Size Range
Pos. AB
30-26 AWG 26-22 AWG 22-20 AWG
[0.05-0.15 mm2] [0.12-0.3 mm2] [0.3-0.6 mm2]
6.300 [7.62] .200 [5.08] 5-102693-1 5-102694-1 5-102695-1
8.400 [10.16] .300 [7.62] 5-102693-2 5-102694-2 5-102695-2
10 .500 [12.70] .400 [10.16] 5-102693-3 5-102694-3 5-102695-3
12 .600 [15.24] .500 [12.70] 5-102693-4 5-102694-4 5-102695-4
14 .700 [17.78] .600 [15.24] 5-102693-5 5-102694-5 5-102695-5
16 .800 [20.32] .700 [17.78] 5-102693-6 5-102694-6 5-102695-6
18 .900 [22.86] .800 [20.32] 5-102693-7 5-102694-7 5-102695-7
20 1.000 [25.40] .900 [22.86] 5-102693-8 5-102694-8 5-102695-8
*Cavity identification — first cavity (one side); Tyco Electronics Part No. and date code stamped on housing where size permits.
Note: Contact Extraction/Lance Reset Tool No. 843477-3, see page 265.
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Keying Plugs
Part No. 87077-2
(Plugs directly into housing)
1
Circuit No. 1
Identifier
Contact
I.D. No.
.050
[1.27] .240
[6.10]
Right-Angle
Header
MT Receptacle
Assembly
PC
Board .270
[6.86]
.300
[7.62]
444 444444
258
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Low Profile Covers for Double-Row MT Receptacle Assemblies
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MT Low Profile Covers
5
L
L
.750
[19.05]
Material
Black thermoplastic, flame retardant
Related Product Data
For use on Double-Row MT Receptacle
Assemblies — pages 256, 257
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
Note: See page 259 for Low Profile
Cover Part Nos.
Front Covers
.095
[2.41] Ty p .
.468
[11.89]
.150
[3.81]
.750
[19.05]
.750
[19.05]
.750
[19.05]
Assembled*
L L
.480
[12.19]
A - Polarizing Cover
(Mates with AMPMODU 4-sided shrouded
headers. Refer to pages 117, 122, 126, 130.)
B - Latching Cover
(Mates with AMPMODU 4-sided shrouded
headers with extraction slot. Refer to
pages 117, 122, 126, 130.)
C - Ejection Cover
(Mates with AMP-LATCH universal ejection
style pin headers equipped with latching
ears, Part No. 102185-2 (with push tabs)
or Part No. 102312-2 (without push tabs),
see Tyco Electronics Catalog 82012.
D - Non-Polarizing Cover
(Designed for use with shielded connectors,
pages 261 & 262; or for non-polarizing
applications.)
*Dimension applies to cover when
installed on connector housing.
Back Covers
E - For Shielding and
Non-Shielding Applications
(For use with any low profile cover.)
F - For Shielding Applications
(For use with Non-Polarizing Cover only.)
259
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Standard Profile Covers for Double-Row MT Receptacle Assemblies
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MT Standard Profile Covers
5
.850
[21.59]
Material
Black thermoplastic, flame retardant
Related Product Data
For use on Double-Row MT Receptacle
Assemblies — pages 256, 257
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
.095
[2.41]
Ty p .
.150
[3.81]
1.120
[28.45]
.468
[11.89]
Assembled*
Top View
Bottom View
1.120
[28.45]
L
G - Hermaphroditic Cover
(Two hermaphroditic covers can be used or
one hermaphroditic cover can be used with
an H Ejection Cover.)
H - Ejection Cover
(Mates with AMP-LATCH universal ejection style
pin headers equipped with latching ears, Part No.
102185-2 (with push tabs) or Part No. 102312-2
(without push tabs), see Tyco Electronics Catalog
82012.
*Dimension applies to cover when
installed on connector housing.
Low Profile Covers Standard Profile Covers
Front Covers Back Covers
No. of Dimension EGH
Pos. L ABCDShielding and FHermaphroditic Ejection
Polarizing Latching Ejection Non-Polarizing Non-Shielding Shielding
Applications Applications
6.300 [7.62] 102540-1 — 102537-1 102541-1 102536-1 — 102396-1 —
8.400 [10.16] 102540-2 — 102537-2 102541-2 102536-2 — 102396-2 —
10 .500 [12.70] 102540-3 — 102537-3 102541-3 102536-3 — 102396-3 —
12 .600 [15.24] 102540-4 102681-1 102537-4 102541-4 102536-4 102823-5 102396-4 —
14 .700 [17.78] 102540-5 102681-2 102537-5 102541-5 102536-5 102823-6 102396-5 —
16 .800 [20.32] 102540-6 102681-3 102537-6 102541-6 102536-6 102823-7 102396-6 —
18 .900 [22.86] 102540-7 102681-4 102537-7 102541-7 102536-7 102823-1 102396-7 —
20 1.000 [25.40] 102540-8 102681-5 102537-8 102541-8 102536-8 102823-4 102396-8 103268-6
22 1.100 [27.94] 102540-9 102681-6 102537-9 102541-9 102536-9 102823-8 102396-9 —
24 1.200 [30.48] 1-102540-0 102681-7 1-102537-0 1-102541-0 1-102536-0 102823-9 1-102396-0 103268-7
26 1.300 [33.02] 1-102540-1 102681-8 1-102537-1 1-102541-1 1-102536-1 1-102823-0 1-102396-1 103268-8
28 1.400 [35.56] 1-102540-2 102681-9 1-102537-2 1-102541-2 1-102536-2 1-102823-1 1-102396-2 —
30 1.500 [38.10] 1-102540-3 1-102681-0 1-102537-3 1-102541-3 1-102536-3 1-102823-2 1-102396-3 103268-9
32 1.600 [40.64] — 1-102681-1 1-102537-4 1-102541-4 1-102536-4 1-102823-3 1-102396-4 —
34 1.700 [43.18] — 1-102681-2 1-102537-5 1-102541-5 1-102536-5 1-102823-4 1-102396-5 1-103268-0
40 2.000 [50.80] — 1-102681-5 1-102537-8 1-102541-8 1-102536-8 102823-2 1-102396-8 —
50 2.500 [63.50] — 2-102681-0 2-102537-3 2-102541-3 2-102536-3 102823-3 2-102396-3 1-103268-3
60 3.000 [76.20] — — 2-102537-8 2-102541-8 2-102536-8 — 2-102396-8 —
64 3.200 [81.28] — — 3-102537-0 3-102541-0 3-102536-0 — 3-102396-0 —
260
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Shielding Hardware and Accessories for MT Interconnection System
AMPMODU Interconnection System
MT Shielding
Hardware and Accessories
5
Product Facts
■Add-on shielding
accessories for existing
AMPMODU Standard MT
and PC board mounted
headers
■Compact design
■Tin plated copper alloy
material
■Redundant cantilever
beams provide for good
peripheral contact,
eliminating the need for
a separate RF gasket
■Polarized mating
■360° cable braid
termination with cable
jacket support
■Cable shielding hardware
permits molded cable
terminations after assembly
■Must be used with braided
shielded cables
■Solder tabs on right-angle
header shields are
self-retaining in a PC board
Shielded MT Receptacles
Shielded Right-Angle Headers
The shielded AMPMODU
MT system features add-on
metal shielding kits for
double-row standard MT
receptacle assemblies and
double-row right-angle
headers.
Cable shielding hardware
consists of a ferrule and two
stamped and formed shell
halves. The inner shell half
has a series of integral
cantilever beams to provide
good peripheral contact
with the mating outer shell
half. This feature also
eliminates the need for a
separate RF gasket.
Detents in the cantilever
beam provide a positive
lock when the two halves
are mated. During assembly
the inner and outer shell
halves are snapped
together over a terminated
standard MT connector.
Shields for right-angle
headers have integral
cantilever beams which
provide good contact with
the mating shielded MT
receptacle assembly,
without the use of a
separate RF gasket.
261
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Shielding Hardware and Accessories for
Double-Row MT Receptacle Assemblies
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MT Shielding
Hardware and Accessories
5
Dimensions Part Nos.
No. of
AB C Outer Inner
Pos. Shell Shell
6.410 [10.41] .817 [20.75] 1.268 [32.21] 102988-2 102987-6
10 .610 [15.49] .817 [20.75] 1.667 [42.34] 103137-2 103136-2
16 .910 [23.11] .950 [24.13] 1.925 [48.90] 103153-2 103152-2
26 1.410 [35.81] .950 [24.13] 1.925 [48.90] 103341-2 103340-2
40 2.110 [53.59] 1.325 [33.66] 2.468 [62.69] 104272-1 104271-1
50 2.610 [66.29] .950 [24.13] 2.468 [62.69] 103158-2 103157-2
Note: Match shield size to number of connector positions.
Outer Shell Half
Flare braid over
assembled shells for
crimping under ferrule
Ferrule Purchased
separately
(See page 263)
Standard MT
Receptacle Assembly
Purchased separately
(Refer to pages 256 & 257)
Two-Piece Shields—
Straight Exit
Material and Finish
Shell Halves — Copper alloy, .020
[0.51] thick; pretinned .000030
[0.00076] min.
Related Product Data
Double-Row MT Receptacle
Assemblies — pages 256, 257
Non-Polarizing Covers (Part No.
Series 102541 with back cover
102536 or 102823) —
pages 258, 259
Shield Ferrules — page 263
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
A
B
C
.326
[8.28]
Inner Shell Half
262
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Shielding Hardware and Accessories for
Double-Row MT Receptacle Assemblies (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MT Shielding
Hardware and Accessories
5
Outer Shell Half
Flare braid over
assembled shells for
crimping under ferrule
Ferrule Purchased
separately
(See page 263)
Standard MT
Receptacle Assembly
Purchased separately
(Refer to pages 256 & 257)
Two-Piece Shields—
Right-Angle Exit
Material and Finish
Shell Halves — Copper alloy, .020
[0.51] thick; pretinned .000030
[0.00076] min.
Related Product Data
Double-Row MT Receptacle
Assemblies — pages 256, 257
Non-Polarizing Covers (Part No.
Series 102541 with back cover
102536 or 102823) —
pages 258, 259
Shield Ferrules — page 263
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
A
B
C
.326
[8.28]
Inner Shell Half
No. of Dimensions Part Nos.
Pos. A B C Outer Shell Inner Shell
18 1.010 [25.65] 1.120 [28.45] 1.413 [35.89] 102784-2 102783-2
26 1.410 [35.81] 1.166 [29.62] 1.975 [50.17] 103139-2 103138-2
40 2.110 [53.59] 1.135 [28.83] 2.633 [66.88] 102786-2 102785-2
50 2.610 [66.29] .983 [24.97] 3.133 [79.58] 102788-2 102787-2
60 3.110 [78.99] 1.118 [28.40] 3.606 [91.59] 103141-2 103140-2
Notes: 1. Match shield size to number of connector positions.
2. Hole is provided in 26 through 60-position cable shields for application of optional cable tie pull ring after
assembly.
.125
[3.18] Dia.
(See Note 2)
263
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MT Shielding
Hardware and Accessories
5
Shielding Hardware and Accessories for
Double-Row MT Receptacle Assemblies (Continued)
Ferrules for Shielding Kits
Material and Finish
Soft copper, tin plated
Related Product Data
Used with Shielding Kits —
pages 261, 262
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
AMP-O-LECTRIC Model
“G” Terminating Machine
Tyco Electronics Hand Tool 91410-1
(Die Set required, see table below)
Application Tooling
No. of Straight-Exit Shields
Right-Angle Exit Shields
Cable Dia. Ferrule Applicator Die* Hand Tool Die Sets
Pos. Outer Inner Outer Inner Range Part Number Assembly Part No. Insulation Braid
6 102988-2 102987-6 — — 0.200-0.250 [5.08-6.35] 102985-4 812665-2 1-527116-8 527116-4
0.250-0.300 [6.35-7.62] 5-102903-2 812665-5 1-527116-6 527116-3
10 103137-2 103136-2 — — 0.310-0.360 [7.87-9.14] 5-102903-1 812665-4 1-527116-5 527116-3
0.370-0.420 [9.40-10.67] 5-102789-1 812665-3 1-527116-4 527116-3
0.190-0.240 [4.83-6.10] 5-102903-3 812665-6 1-527116-7 527116-3
16 103153-2 103152-2 — — 0.250-0.300 [6.35-7.62] 5-102903-2 812665-5 1-527116-6 527116-3
0.310-0.360 [7.87-9.14] 5-102903-1 812665-4 1-527116-5 527116-3
0.370-0.420 [9.40-10.67] 5-102789-1 812665-3 1-527116-4 527116-3
0.190-0.240 [4.83-6.10] 5-102903-3 812665-6 1-527116-7 527116-3
18 — — 102784-2 102783-2 0.250-0.300 [6.35-7.62] 5-102903-2 812665-5 1-527116-6 527116-3
0.310-0.360 [7.87-9.14] 5-102903-1 812665-4 1-527116-5 527116-3
0.370-0.420 [9.40-10.67] 5-102903-1 812665-3 1-527116-4 527116-3
0.320-0.370 [8.13-9.40] 5-102903-4 812665-9 1-527116-3 527116-2
26 103341-2 103340-2 103139-2 103138-2 0.430-0.460 [10.92-11.68] 5-102789-2 812665-7 1-527116-1 527116-2
0.320-0.370 [8.13-9.40] 5-102903-4 812665-9 1-527116-3 527116-2
40 104272-1 104271-1 102786-2 102785-2 0.430-0.460 [10.92-11.68] 5-102789-2 812665-7 1-527116-1 527116-2
0.380-0.420 [9.65-10.67] 5-102903-6 1-812665-5 1-527116-2 527116-1
50 103158-2 103157-2 102788-2 102787-2 0.430-0.460 [10.92-11.68] 5-102903-5 1-812665-4 1-527116-1 527116-1
0.470-0.520 [11.94-13.21] 5-102789-3 1-812665-3 1-527116-0 527116-1
0.470-0.520 [11.94-13.21] 5-102903-8 1-812665-8 — —
60 — — 103141-2 103140-2 0.500-0.545 [12.70-13.84] 5-102903-7 1-812665-7 — —
0.550-0.600 [13.97-15.24] 5-102789-4 1-812665-6 — —
*For use with Model “K” machines. Call the Tyco Electronics Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model “G” machines (also shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. Ferrules are used with shielding kits shown on pages 261 & 262, and are purchased separately.
2. Individual anvils and crimpers also may be purchased separately.
3. Ferrule Part Number 1-102903-8 also requires Spacer Part Number 527116-9.
264
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Shielded MT Headers for use with Shielded MT Receptacle Assemblies
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MT Shielded Headers
5
AMPMODU Right-Angle
Headers PC Board Mounted
Material and Finish
Housing — Black thermoplastic,
flame retardant
Posts — Copper alloy, plated .000030
[0.00076] gold over .000050 [0.00127]
nickel on entire post
Shield — Copper alloy, .020 [0.51]
thick; pretinned .000030 [0.00076] min.
Related Product Data
Mating Connectors — Double-Row
MT Receptacle Assemblies with
Shielding Hardware — pages 256-263
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032.
Instruction Sheet
408-6532
.460
[11.68]
.550
[13.97]
.125
[3.18]
.025
[0.64] Sq. Posts
B
A
.755
[19.18]
.290
[7.37]
C
Shield
.030
[0.76]
.318
[8.08]
.135
[3.43]
.434
[11.02]
Right-Angle
Header
A
A
.725
[18.45]
.145±.003
[3.68±0.08]
2 Plc.
.145±.003
[3.68±0.08]
2 Plc.
.100±.003
[2.54±0.08]
.550±.003
[13.97±0.08]
.040±.003
[1.02±0.08] Dia.
(All holes)
D ±.003
[±0.08]
2D ±.003
[±0.08]
D±.003
[±0.08]
2D ±.003
[±0.08]
.100±.003
[2.54±0.08]
.050±.003
[1.27±0.08]
Recommended PC Board Hole Layout
for 6, 8 and 10 Positions
Recommended PC Board Hole Layout
for 16 thru 50 Positions
D - Contact centerline is .100 [2.54]; ±.003 [0.08] tolerances
not to accumulate within one connector pattern.
No. of Dimensions Header Shield
Pos. ABC
Part Nos. Part Nos.
6.200 [5.08] .430 [10.92] .510 [12.95] 102792-6 102991-1
8.300 [7.62] .530 [13.46] .610 [15.49] 102792-8 102991-2
10 .400 [10.16] .630 [16.00] .710 [18.03] 102792-1 102791-2
16 .700 [17.78] .930 [23.62] 1.010 [25.65] 102792-7 102791-3
18 .800 [20.32] 1.030 [26.16] 1.110 [28.19] 102792-2 102791-4
20 .900 [22.86] 1.130 [28.70] 1.210 [30.73] 102792-5 1-102791-0
26 1.200 [30.48] 1.430 [36.32] 1.510 [38.35] 102792-9 102791-1
50 2.400 [60.96] 2.630 [66.80] 2.710 [68.83] 102792-4 102791-8
265
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Replacement MT Receptacle Contacts
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MT Contacts
5
Wire Size Range Standard Pressure High Pressure
Receptacle Receptacle
AWG [mm2]Contact Ident. Part No. Contact Ident. Part No.
30-26 0.05-0.15 1 5-102395-2 4 5-102641-6
26-22 0.12-0.3 2 5-102399-1 5 5-102642-6
22-20 0.3-0.6 3 5-102449-6 — —
Note: Termination tooling for MT receptacle insulation displacement contacts is shown on pages 273-275.
Insulation Displacement
Contacts
Material and Finish
Copper alloy, duplex plated .000030
[0.00076] gold in mating area, .000100-
.000200 [0.00254-0.00508] tin in crimp
area, with entire contact underplated
.000050 [0.00127] nickel
Related Product Data
Performance Characteristics —
page 255
Application Tooling —
pages 273-275
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
.050
[1.27] Max.
Insulation
Diameter
Contact
Identification
MT receptacle contacts
incorporate the following
features.
Cantilever
Beams
Wide
Misalignment
Tolerance
Anti-
overstress
The MT receptacle contact
cross-section is primarily
rectangular, with rounded
corners. Two integral
cantilever beams contact
the mating square male
posts. Deflection of these
spring members is limited
by anti-overstress and
excessive permanent
deformation is prevented.
This feature allows a wide
range for tolerance of
misalignment of mating
contacts.
Extraction/Lance Reset Tool
No. 843477-3
The configuration of the
receptacle completely
encloses the spring
members helping to prevent
damage during handling
and assembly, and makes
the system compatible with
automatic application
techniques.
266
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mini-Tandem Spring Receptacle Housings and Contacts
AMPMODU Interconnection System
Mini Tandem Spring
Housings and Contacts
5
Specifications
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.) — gold plated
contacts
18 milliohms (max.) — tin plated
contacts
Durability — Ref. Product
Specification 108-25031
Product Facts
■Individual contacts mate
with .025 [0.64] sq. posts,
.125 [3.18] long
■Crimp snap-in contacts
accept 32-22 AWG
[0.03-0.32 mm2] wire
■Retention latch provides for
positive installation
■No insertion tool required
■High durability design
provides long life
■Available with .000015
[0.00038] or .000030
[0.00076] thick gold inlay
in contact areas, or bright
tin plated
■Closed-entry housings
■Mini-contact box size:
.060 [1.52] sq.
■Mini-Tandem Spring
Housings can be stacked
on .100 [2.54] centers in
either direction
■Mini-Tandem
Spring Housings are
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
Mini-Tandem Spring
Receptacle Contacts are
designed to mate with .025
[0.64] posts. When used
individually, they will mate
with posts as short as .125
[3.18] and when used in a
housing, they will mate with
.140 [3.55] long posts.
These versatile contacts
may be used for
interconnecting posted
pc panels, I/O wiring and
cross-connecting pin
arrays.
The receptacle contact's
box configuration provides
for long contact life with
controlled contact mating
forces which minimize wear.
An external retention spring
facilitates quick assembly
and provides firm seating in
a contact housing.
Mini-Tandem Spring
Receptacle Contacts are
used in single- or double-
row housings with .100
[2.54] centerline spacing.
Single-row housings can be
converted into double-row
connectors on .100 x .200
[2.54 x 5.08] centers with
the use of stacking clips.
Mini-Tandem Spring
Housings can be stacked
side-by-side or end-to-end
on .100 [2.54] centers.
R
R
267
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mini-Tandem Spring Housings, Single-Row
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Spring Housings
5
.100 [2.54] Centerline
Material — Black glass-filled poly-
ester, 94V-0 rated
A Max.
.550
[13.97]
No. of Dimensions Housing
Pos. ABC
Part No.
2.200 [5.08] 1 .100 [2.54] 530554-1
4.400 [10.16] 3 .300 [7.62] 530554-3
8.800 [20.32] 7 .700 [17.78] 530554-7
12 1.200 [30.48] 11 1.100 [27.94] 1-530554-1
16 1.600 [40.64] 15 1.500 [38.10] 1-530554-5
18 1.800 [45.72] 17 1.700 [43.18] 1-530554-7
20 2.000 [50.80] 19 1.900 [48.26] 1-530554-9
22 2.200 [55.88] 21 2.100 [53.34] 2-530554-1
Note: Mini-Tandem Spring contacts for use in these housings are shown on page 269.
.030
[0.76]
.050
[1.27] .100
[2.54] Max.
.100
[2.54] B Spaces
@ .100 [2.54] = C
Material—Natural color nylon,
94V-2 rated
Keying Plug
Part No. 531226-1
(Plugs directly into housing)
.036
[0.91]
.066
[1.68]
.050
[1.27]
Minimum mating post length is .140 [3.55].
Technical Documents —
pages 277, 278
Product Specification
108-25031
Application Specification
114-25021
268
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mini-Tandem Spring Housings, Double-Row
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mini-Tandem
Spring Contacts
5
.100 [2.54] Centerline
Material — Black glass-filled
polyester, 94V-0 rated*
A Max.
.550
[13.97]
No. of Dimensions Housing
Pos. ABC
Part No.
6.300 [7.62] 2 .200 [5.08] 530902-1
8.400 [10.16] 3 .300 [7.62] 530902-6
12 .600 [15.24] 5 .500 [12.70] 2-530902-0
16 .800 [20.32] 7 .700 [17.78] 3-530902-0
Note: Mini-Tandem Spring contacts for use in these housings are shown on page 269.
.030
[0.76]
.200
[5.08]
.100
[2.54] B Spaces
@ .100 [2.54] = C
Material — Natural color nylon,
94V-2 rated
Keying Plug
Part No. 531226-1
(Plugs directly into housing)
*Consult Tyco Electronics for
specific UL recognition.
.036
[0.91]
.066
[1.68]
.050
[1.27]
Minimum mating post length is .140 [3.55].
.100
[2.54] Max.
Technical Documents —
pages 277, 278
Product Specification
108-25031
Application Specification
114-25021
269
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mini-Tandem Spring Contacts
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mini-Tandem
Spring Housings
5
Receptacle Contacts
Material and Finish
Phosphor bronze, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold inlay on contact area, matte
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold inlay on contact area, matte
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Plating C — Duplex plated .000050
[0.00127] over matte tin in contact area,
over .000030 [0.00076] nickel on entire
contact
Plating D — .000100 [0.00254] min.
matte tin over .000030 [0.00076] nickel on
entire contact
Technical Documents —
pages 277, 278
Product Specification
108-25031
Application Specification
114-25021
.060
[1.52]
.085
[2.15] Min.
Contact
Area with
Gold Inlay
.060
[1.52]
Low Pressure Contacts
Miniature Applicator for
Wire Size Range Ins. Dia. Contact Part No. Applicator for AMP-O-MATIC
AWG mm2Range Finish Strip Form Loose Piece AMP-O-LECTRIC Stripper/Crimper
Machine* Machine
26-22 0.14-0.32 0.36-0.54 Plating A 5531216-3 5531216-4 466819-2 466943-1
[0.64-1.37] Plating B 5531216-1 5531216-2
Standard Pressure Contacts
Miniature Applicator for
Wire Size Range Ins. Dia. Contact Part No. Applicator for AMP-O-MATIC
AWG mm2Range Finish Strip Form Loose Piece AMP-O-LECTRIC Stripper/Crimper
Machine* Machine
.025-.054 Plating B 530901-2 530901-3
32-28 0.03-0.08 [0.64-1.37] Plating C 5530901-6 5530901-7 466723-1 466952-1
Plating D 5530901-4 5530901-5
.036-.054 Plating B 5530553-4 —
26-22 0.14-0.32 [0.91-1.37] Plating C 5530553-6 — 466819-2 466943-1
Plating D 5530553-2 —
High Pressure Contacts
Miniature Applicator for
Wire Size Range Ins. Dia. Contact Part No. Applicator for AMP-O-MATIC
AWG mm2Range Finish Strip Form Loose Piece AMP-O-LECTRIC Stripper/Crimper
Machine* Machine
32-28 0.03-0.08 .025-.054 Plating B 5531225-6 — 466723-1 466952-1
[0.64-1.37]
26-22 0.14-0.32 .036-.054 Plating B 5531224-6 — 466819-2 466943-1
[0.91-1.37]
*For use with AMP-O-LECTRIC Model “K” machines. Call the Tooling/Technical Assistance Center (1-800-522-6752)
for part nos. of applicators for use with the AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as
other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. Mini-Tandem Spring Receptacle Contacts are for use only in the housings shown on pages 267 & 268.
They cannot be used in AMPMODU Mod IV Housings.
2. Use Hand Tool No. 91540-1 for crimping loose-piece receptacles to all wire sizes listed above.
3. Application tooling is described on pages 270 & 275.
270
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling for Wire Crimp Contacts
AMPMODU Interconnection System
Application Tooling
5
Tooling shown on this page
is designed to terminate
wire crimp contacts used in
various AMPMODU wire-to-
board connectors. Refer to
page 88 to determine the
applicable connectors.
This machine automatically
strips as well as terminates
individual wires. Similar to
the AMP-O-LECTRIC Model
“G” machine, applicators
are quickly interchangeable,
and it includes precision
adjustment for crimp height.
All adjustments can be made
from the front of the machine,
without special tools.
For further details, request
Tyco Electronics Catalog
65004.
AMP-O-MATIC Stripper/Crimper Machine
Applicators
Several terminating
machines, including the
AMP-O-LECTRIC Model “G”,
AMP-O-MATIC Stripper/
Crimper and AMPOMATOR
CLS machines, are
designed for use with
interchangeable
applicators. Basic styles are
quickly interchangeable to
minimize costly downtimes,
and feature dial-in wire and
insulation crimp height
settings. Special applicators
are available for use with
the Crimp Force Monitor
(see page 272), for
measuring the crimp height
of each termination as it is
made, plus evaluating the
quality of each crimp.
EDGE, Electronic Applicator
Counter
The new versatile EDGE
applicator counter tracks
wearable tool usage for the
most effective maintenance
planning. The completely
electronic counter with clear
LCD display, indicates
cycles since installation.
By performing maintenance
at measured intervals with
pre-set limits, operators
avoid breakdowns and
rejects caused by tool wear
or mid-adjustment. For more
information, request catalog
1773385.
A totally new design of our
most popular machine for
bench-top operation. It
features a quiet and reliable
direct motor drive, electronic
controls for easy setup and
operation, and improved
guarding and lighting for
operator convenience and
safety. All versions include
either manual or automatic
precision adjustment for
crimp height.
For further details, request
Tyco Electronics Catalog
65828.
Heavy Duty Miniature
Applicators
AMP-O-LECTRIC Model “G” Terminating Machine
(Shown with Optional Crimp Force Monitor)
271
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling for Wire Crimp Contacts (Continued)
AMPMODU Interconnection System
Application Tooling
5
As a value oriented
terminator, the AMP 3K/40
and AMP 5K/40 are
designed for customers
that require the increased
output and quality of a
semiautomatic machine at
a competitive price. By
incorporating the most
commonly requested
features as standard and
offering a long list of
optional equipment, these
terminators offer flexibility to
meet the specific needs of
various applications at the
lowest possible cost.
AMP 3K/40 and AMP 5K/40
Terminators
The combination of the
Stripping Module with the
AMP-O-LECTRIC Model G
Terminator or the AMP
3K/40, 5K/40 provides an
economical, proficient
method of stripping wire
and crimping terminals on
the same machine. Wires
are stripped moments
before crimping, meaning
there is virtually no chance
of damaging wire
conductors during handling
or storage. Once the wire is
fed into the start sensor, the
Stripping Module does the
rest, improving placement
accuracy. For more
information, request catalog
1309085.
Optional Stripping Module for
the AMP 3K/40, AMP 5K/40 and
the AMP-O-LECTRIC Model G
AMP 5K/40 Terminator
272
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling for Wire Crimp Contacts (Continued)
AMPMODU Interconnection System
Application Tooling
5
Tooling shown on this page
is designed to terminate
wire crimp contacts used in
various AMPMODU wire-to-
board connectors. Refer to
page 88 to determine the
applicable connectors.
The AMPOMATOR
System III is an automatic
machine for the production
of terminated wire leads.
The machine combines
state of the art technology
to process single and
double wire application
utilizing the wire processing
industry’s best and most
friendly subsystems and
accessories available to
meet the latest market
requirements for wire lead
production.
The new machine
incorporates a servo-driven,
software-controlled
AMP-O-LECTRIC ST III
terminator and the next
generation System III
Applicator.
See catalog 1654956-5 for
more information.
Commercial grade hand
tool for crimping various
products. Features ratchet
control to provide complete
crimp cycle. Accepts both
pinned- and shouldered-
style die sets. Locators are
provided with pinned-style
die sets for proper contact
and wire positioning, and to
help minimize contact rota-
tion and bending during
crimping. Approximate
weight 1.3 lb [0.60 kg].
Your quality program calls
for more than a good
crimping system. It
demands proof - the proof
you get with the SLE Crimp
Force Monitor. It has high-
resolution piezo-quartz
sensor technology for a
more precise identification
of typical crimping faults.
The monitor features Zone &
Peak Force Analysis,
128x128 Dot Matrix, Force
Trigger and Encoder
Proximity Trigger, and
Absolute Force
Measurement for real-time
monitoring of every crimp.
The CFM can be used with
bench or fully-automatic
machines. Special
applicators are not required.
Sure, you can sample and
test crimp height with a
micrometer. In fact, that’s
how you standardize your
process. But for ongoing
quality control, testing every
crimp, SLE is the choice. It’s
known worldwide, and
meets our standards for a
high performance
terminating system. That’s
how you can be sure.
High quality crimping - with
verification - means higher
production and productivity.
AMPOMATOR System III Leadmaker
Crimp Force Monitor (CFM)
Premium CERTI-CRIMP Straight
Action Hand Tool (SAHT)
Commercial PRO-CRIMPER III
Hand Tool
Tyco Electronics hand
tools are ideal for small
production and prototype
applications. They feature
ratchet control to help elimi-
nate partial crimps, straight-
line die closure, terminal
locator and support, and
insulation crimp adjustment.
Tyco Electronics hand tools
also can be adapted for
use with pneumatic tooling
assemblies, providing air
operated crimping
capabilities.
For further details on
Tyco Electronics straight
action hand tools, request
Tyco Electronics Catalog
65780. For more details on
Tyco Electronics pneumatic
tooling assemblies, call
the Tyco Electronics
Technical Support Center,
1-800-522-6752.
273
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling for Insulation Displacement Crimp (IDC)
Contacts and Connectors
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Application Tooling
5
Pistol Grip Manual and
Air Powered Tools
The manual pistol grip tool
features an interchange-
able modular terminating
head which also can be
used in the pneumatic ver-
sion, the Bench Mount
Pneumatic Power Assembly
and the IDC Electric Power
Unit. The head terminates
one unstripped wire per
cycle and indexes the con-
nector to the next terminat-
ing position. The head
rotates to permit optimum
access to the wiring area.
The Bench Mount Pneumatic
Power Assembly is air actu-
ated with either a foot or
knee switch. This capability
frees the operator’s hands
for optimum positioning.
Modular Heads:
58062-1 (for MT connectors)
58336-1 (for MTE connectors)
58395-1 (for Level V IDC connectors)
58540-1 (for MTE connectors, discrete
wire or flat ribbon cable)
Tooling shown on this page
is designed to terminate
IDC contacts for various
AMPMODU wire-to-board
connectors. Refer to page
88 to determine the applica-
ble connectors.
Bench Mounted Pneumatic Power Assembly
No. 58338-1
IDC Electric Power Unit
This electrically powered
semiautomatic bench
machine is designed for
applying AMPMODU MTE
and MT connectors to dis-
crete wires. It is portable
and compact and uses
existing pistol grip modular
heads. The heads are easily
interchanged to run different
products. *The IDC Electric
Power Unit’s cycle rate is
approximately 7,200 cycles
per hour, with exact produc-
tion rates depending upon
operator dexterity.
Modular Heads:
58062-1 (for MT connectors)
58336-1 (for MTE connectors)
Pneumatic Pistol Grip
Tool No. 58075-1
Manual Pistol Grip
Tool No. 58074-1
IDC Electric Power Unit
No. 931800-1
*A tube-fed track assembly, Part No.
856675-1, also can be used with
MTE Connectors.
This modular head tool can
be used on any pistol grip
tool. It was designed for dis-
crete wire or flat ribbon cable
applications.
Modular Head
Tool No. 58540-1
274
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Application Tooling
5
Tooling shown on this page
is designed to terminate
IDC contacts for various
AMPMODU wire-to-board
connectors. Refer to page
88 to determine the appli-
cable connectors.
Tube-Fed Ribbon Cable Machine
2700 lb. Power Unit With
Cable Notching Die
Equipped with a cable
notching die an adapter kit,
this fully pneumatic bench
machine provides the 2700 lb
[12 010N] force required for
end-notching ribbon cable.
It features a grooved cable
support plate, a pressure
plate and a cable stop to
facilitate cable alignment
and positioning during the
notching process.
Notching Dies:
854449-1 (for 24-22 AWG
[0.2-0.6 mm2] Wire
854449-2 (for 28-26 AWG
[0.08-0.15 mm2] Wire
Tube-Fed Ribbon Cable Machine No. 856002-1
2700 lb. Power Unit
No. 312522-1
spring-driven unit which
conveys connectors
through the product tube to
the terminating station. The
air-operated terminating sta-
tion positions and termi-
nates contacts onto the
notched cable. The seating
station is manually operated
and seats connector hous-
ings onto the terminated
contacts.
Designed for bench appli-
cations, this machine is
pneumatically operated and
controlled by a foot pedal. It
terminates connectors onto
end-notched ribbon cable.
*The connectors are sup-
plied in strip form and in
plastic tubes. The machine
consists of three basic sub-
assemblies: a feed track, a
terminating station and a
seating station. The feed
track is a constant force,
*At a rate of 13-25 positions at a time.
Application Tooling for Insulation Displacement Crimp (IDC)
Contacts and Connectors (Continued)
275
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Application Tooling
5
Application Tooling for Insulation Displacement Crimp (IDC)
Contacts and Connectors (Continued)
Tooling shown on this page
is designed to terminate
IDC contacts for various
AMPMODU wire-to-board
connectors. Refer to page
88 to determine the applica-
ble connectors.
CHAMPOMATOR Model 2.5 Terminating Machine No. 354786-(*)
This compact bench
machine terminates wires
manually sorted from
multiconductor cables.
Termination sequence may
include full termination of all
contacts, or selective termi-
nation. Designed for easy
programming, the machine
is microprocessor controlled
and programmed by a
membrane switch key-
board. It also has an inter-
nal storage capability for
retaining up to 350 cable
assemblies. Connectors
can be terminated with
either straight or right-angle
wire dress.
*For applicable dash nos.,
call the Technical Support
Center: 1-800-522-6752.
For further details, request
Tyco Electronics Catalog
82247
This floor model machine
automatically sorts wires
from multiconductor jack-
eted cable and terminates
them in a user-determined
sequence; either full termina-
tion of all contacts, or selec-
tive termination. Designed
for easy programming, the
machine is microprocessor
controlled and programmed
by a touchscreen. It also has
an internal storage capability
for retaining up to 50 cable
assemblies. Connectors can
be terminated with either
straight or right- angle wire
dress. All cable assemblies
are tested for continuity and
shorts.
*For applicable dash nos.,
call the Technical Support
Center: 1-800-522-6752.
For further details, request
Tyco Electronics Catalog
82247
CHAMPOMATOR Model 3A Terminating Machine No. 761420-(*)
276
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Technical Documents for Board-to-Board Products
AMPMODU Interconnection System
Note: All part numbers are RoHS
compliant.
Technical Documents
5
Product Specifications describe technical performance characteristics and verification tests.
They are intended for the Design, Component and Quality Engineers.
PC/104 and PC/104-
Plus
Connectors — Pages 5-12:
108-1956 PC/104 and PC/104-
Plus
Connector Systems
Receptacle Assemblies and Unshrouded Breakaway Headers, Surface-Mount — Pages 109, 110, 185-192:
108-25017 AMPMODU Interconnection System, Two-Piece
108-25022 AMPMODU Mod. IV Interconnection System, Vertical Assemblies
108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle
Assembly and Header
Two-Piece Printed Circuit Board Connectors — Pages 193-202:
108-16 ACTION PIN Contacts
108-25017 AMPMODU Interconnection System, Two-Piece
108-25027 AMPMODU Mod. II Interconnection System, Short-Point Receptacle Assembly
and Header
Receptacle Assemblies, Horizontal and Vertical Board Mount — Pages 168-192:
108-25022 AMPMODU Mod. IV Interconnection System, Vertical Assemblies
108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle
Assembly and Header
108-25027 AMPMODU Mod. II Interconnection System, Short-Point Receptacle Assembly
and Header
.025 [0.64] Square Posts, Headers, Accessories and Tooling — Pages 92-105, 114-140, 145-153, 163:
108-16 ACTION PIN Contacts
108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle
Assembly and Header
Application Specifications describe requirements for using the product in its intended application,
and/or crimping information. They are intended for the Packaging and Design Engineers and the
Setup person.
PC/104 and PC/104-
Plus
Connectors — Pages 5-12:
114-13021 PC/104 and PC/104-
Plus
Connectors
Two-Piece Printed Circuit Board Connectors — Pages 193-202:
114-9009 AMPMODU Header, Two-Piece, Double Row, Application of
Receptacle Assemblies, Horizontal and Vertical Board Mount — Pages 168-192:
114-25018 AMPMODU Mod. II and IV Receptacle Assembly, PC Board Mounted, Vertical,
Application of
.025 [0.64] Square Posts, Headers, Accessories and Tooling — Pages 92-105, 114-140, 145-153, 163-167:
114-25028 ACTION PIN Contacts with Tyco Electronics Headers, Application
114-13011 AMPMODU .025 and .045 Square Continuous Posts
Instruction Sheets provide instructions for assembling or applying the product. They are intended
for the Manufacturing Assembler or Operator.
PC/104 and PC/104-
Plus
Connectors — Pages 5-12:
408-8502 Future Board Assembly 1424685 for PC/104 and PC/104-
Plus
Connectors
408-8503 Seating Tool Assembly 1424686 for PC/104 and PC/104-
Plus
Connectors
408-8504 Pneumatic Seating Tool Assembly 1424930-1 for PC/104 and PC/104-
Plus
Connectors
408-8505 Manual Seating Tool Assembly 1424931-1 for PC/104 and PC/104-
Plus
Connectors
Two-Piece Printed Circuit Board Connectors — Pages 193-202:
408-2636 ACTION PIN Contact Rear Insertion/Extraction Tool 265871-7
408-9054 Seating Tools
Receptacle Assemblies, Horizontal and Vertical Board Mount — Pages 168-192:
408-7411 Suggestions for Wave Soldering Vertical AMPMODU Receptacles
.025 [0.64] Square Posts, Headers, Accessories and Tooling — Pages 92-105, 114-140, 145-153, 163:
408-2636 ACTION PIN Contact Rear Insertion/Extraction Tool 265871-7
408-6944 Tyco Electronics Uninsulated Bandolier Post Insertion Tool 91419-1
408-7977 AMPMODU Double Row, Straight Posts, End Shrouds .100 x .100 [0.64 x 0.64] Centers
408-7878 AMPMODU Header Barrier Inserts
408-9054 ACTION PIN Contact Headers Seating Tool, 91170 Series
408-9707 Tool Kit 314818-1 for Breakaway Headers
Handbook Guide to Application of ACTION PIN Contact Connectors
5697
Various technical documents
are available for your use.
277
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Technical Documents for Wire-to-Board Products
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Technical Documents
5
Product Specifications describe technical performance characteristics and verification tests.
They are intended for the Design, Component and Quality Engineers.
Locking Clip Contacts and Housings — Pages 206-209:
108-36028 Connector, Locking Clip, .025 [0.64] Square, Gold
108-36028-1 Connector, Locking Clip, .025 [0.64] Square, Tin
Mod. IV Wire-Applied Contacts and Housings — Pages 210-220:
108-25007 AMPMODU Mod. V Interconnection System, Wire-Applied (High Pressure)
108-25019 AMPMODU Mod. IV Male Connectors
108-25020 AMPMODU Mod. IV Interconnection System, (Standard Pressure)
108-25021 AMPMODU Mod. IV.V Interconnection System, (Intermediate Pressure)
Short-Point Wire-Applied Contacts and Housings — Pages 221-224:
108-1472 Short-Point Contacts and Housings
AMPMODU MTE Interconnection System — Pages 225-252:
108-25034 AMPMODU MTE Connectors
AMPMODU MT and Shielded MT Interconnection System — Pages 255-265:
108-25015 AMPMODU MT Standard Pressure Connectors
108-25018 AMPMODU MT High Pressure Connectors
108-25030 AMPMODU MT Shielding Accessories
AMPMODU Level V, IDC Connectors —
108-25028 Interconnection System, Insulation Displacement Connector, IDC Level
Mini-Tandem Spring Receptacle Contacts — Pages 266-269:
108-25031 Tandem Spring Receptacle Contact
Application Specifications describe requirements for using the product in its intended application,
and/or crimping information. They are intended for the Packaging and Design Engineers and the
Setup person.
Locking Clip Contacts and Housings — Pages 206-209:
114-25006 Contact, Locking Clip, .025 [0.64] Square, Application of
Mod. IV Wire-Applied Contacts and Housings — Pages 210-220:
114-25003 AMPMODU Mod. IV (Standard Pressure), AMPMODU Mod. IV.V (Intermediate
Pressure) and AMPMODU Mod. V (High Pressure) Receptacle Contacts,
Application of
114-25016 AMPMODU Mod. IV Crimp Pin Contact
Short-Point Wire-Applied Contacts and Housings — Pages 221-224:
114-25038 Short-Point Contacts and Housings
AMPMODU MTE Interconnection System — Pages 225-252:
114-25026 AMPMODU MTE Interconnection System
AMPMODU MT and Shielded MT Interconnection System — Pages 255-265:
114-25032 AMPMODU MT Interconnection System and Shielding Accessories,
Application of
AMPMODU Level V, IDC Connectors —
114-25020 Interconnection System, IDC Level V, Application of
Mini-Tandem Spring Receptacle Contacts — Pages 266-269:
114-25021 Tandem Spring Receptacle Contact, Application of
Various technical documents
are available for your use.
278
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Technical Documents for Wire-to-Board Products (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Technical Documents
5
Instruction Sheets provide instructions for assembling or applying the product. They are intended
for the Manufacturing Assembler or Operator.
Locking Clip Contacts and Housings — Pages 206-209:
408-7604 Tyco Electronics Extraction Tool 91084-1
408-7606 Tyco Electronics Locking Clip Contacts and Connectors
408-7627 Tyco Electronics Hand Crimp Tool 90295-1, 28-30 AWG Wire
408-8547 Tyco Electronics Hand Crimp Tool 91533-1, 22-26 AWG Wire
408-9388 Tyco Electronics Hand Crimp Tool 90431-1, 20 AWG Wire
Mod. IV Wire-Applied Contacts and Housings — Pages 210-220:
408-4379 Tyco Electronics PRO-CRIMPER II Hand Tool
408-7935 AMPMODU Receptacle Connectors with Strain Relief/Pull Tabs
408-8547 Tyco Electronics Hand Tool 91516-1, 91517-1 and 91541-1
408-9451 Tyco Electronics Extraction Tool 843473-1 for AMPMODU Wire-Applied Housings
86308
408-9453 Tyco Electronics Extraction Tools 843996 and 843477 for Removing AMPMODU
Crimp Snap-In Receptacle Contacts from Wire-Applied Housings
AMPMODU MTE Interconnection System — Pages 225-252:
409-5746 Tyco Electronics Electric Power Unit 931800-1
409-5832 MTE Ribbon Cable Terminator 856002-1
408-6789 Tyco Electronics Pneumatic Pistol Handle 58075-1
408-6790 Tyco Electronics Manual Pistol Handle 58074-1
408-6919 AMPMODU MTE Connectors
408-8547 Tyco Electronics Hand Crimp Tool 91518-1 and 91551-1
408-9230 Tyco Electronics Keying Tool 91417-1
408-9359 MTE Modular Terminating Head 58336-1
408-9393 Tyco Electronics Pneumatic Bench Assy. 58338-1
408-9407 Tyco Electronics Hand Crimp Tool 91531-1 and 58342-2
408-9453 Tyco Electronics Extraction Tools 843996 and 843477 for Removing AMPMODU
Crimp Snap-In Receptacle Contacts from Wire-Applied Housings
408-9515 Ribbon Cable Notcher 854449-[]
AMPMODU MT and Shielded MT Interconnection System — Pages 255-265:
408-6532 AMPMODU MT Connectors
AMPMODU Level V, IDC Connectors —
408-6843 Tyco Electronics Extraction Tool 91409-1
Standard Tandem Spring and Mini-Tandem Spring Receptacle Contacts — Pages 266-269:
408-7909 Tyco Electronics Hand Crimping Tool 91540-1
