Document Number: 28744 For technical questions, contact: ff3aresistors@vishay.com www.vishay.com
Revision: 09-Aug-06 1
MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01
Vishay Beyschlag
Flat Chip Resistors with Established Reliability
FEATURES
•
Approved according to EN 140401-801, version E
•Established reliability, failure rate level E6
•Advanced thin film technology
•Advanced dissipation rating: 100 mW
•Excellent overall stability: Class 0.5
•Green product, supports Lead (Pb)-free soldering
APPLICATIONS
•Military
•Avionics
•Space
METRIC SIZE
INCH: 0402 0603 0805
METRIC: RR 1005M RR 1608M RR 2012M
MCS 0402 VG01, MCT 0603 VG01 and MCU 0805 VG01
thin film flat chip resistors with established reliability are the
perfect choice for all high-reliability applications typically
found in the fields of military, aircraft and spacecraft
electronics. These versions supplement the families of
professional and precision thin film flat chip resistors MCS
0204, MCT 0603 and MCU 0805.
Note: The failure rate level E6 corresponds to MIL Level P.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
TECHNICAL SPECIFICATIONS
DESCRIPTION MCS 0402 MCT 0603 MCU 0805
CECC size, style RR 1005M RR 1608M RR 2012M
Resistance range 100 Ωto 100 kΩ10 Ωto 1 MΩ1Ωto1MΩ
Resistance tolerance ± 1 %; ± 0.1 %
Temperature coefficient ± 50 ppm/K; ± 15 ppm/K
Climatic category (LCT/UCT/days) 55/125/56 55/125/56 55/125/56
Rated dissipation, P70 0.063 W 0.1 W 0.125 W
Operating voltage, Umax AC/DC 50 V 75 V 150 V
Film temperature 125 °C125°C125°C
Max. resistance change at P70
for resistance range, ΔR/R after: 100 Ωto 100 kΩ10 Ωto 1 MΩ1Ωto1MΩ
1000 h ≤ 0.25 %
8000 h ≤ 0.5 %
225 000 h ≤ 1.5 %
Permissible voltage against
ambient (insulation):
1 minute; Uins 75 V 100 V 200 V
continuous 75 V 75 V 75 V
Failure rate level E6
Failure rate ≤ 2 × 10−9/h ≤ 2 × 10−9/h ≤ 2 × 10−9/h
e3
RoHS
COMPLIANT
MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01
Vishay Beyschlag Flat Chip Resistors with Established Reliability
www.vishay.com For technical questions, contact: ff3aresistors@vishay.com Document Number: 28744
2Revision: 09-Aug-06
Note: We recommend that the clear text ordering code is used to minimize the possibility of errors in order handling.
1. Availability in accordance to the table Part Numbers at the end of this datasheet.
2. Jumpers are ordered by the resistance value 0 Ω, e.g. MCT 0603 VG01 P5 0R0.
PRODUCT DESCRIPTION
M C T 0603 -50 1 % VG01 P5 287 K
FILM
TYPE
PRODUCT
CODE
SIZE
CODE
IMPERIAL
SIZE
TEMPERATURE
COEFFICIENT
TOLERANCE ESTABLISHED
RELIABILITY
PA CK AG I N G (1) RESISTANCE
VALUE
M = Metal C = Flat
Chip
S = 0402
T = 0603
U = 0805
0402
0603
0805
± 15 ppm/K
± 50 ppm/K
± 0.1 %
± 1 %
Reference to
EN 140401-801
Version E
P1 = 1000 units
P5 = 5000 units
E1 = 1000 units
E0 = 10 000 units
PW = 20 000 units
See Temperature
coefficient and
resistance range
table
EN 140401-801 ORDERING INFORMATION
Example of the ordering information for a resistor: MCT 0603-50 1 % VG01 287K
CECC40401-801EZRR1608MC287KFE6
Example of the ordering information for jumpers: MCT 0603 VG01 0R0
CECC40401-801EZRR1608M-0R00-E6
The elements used in this ordering information have the following meaning:
CECC40401-801
EZ
RR1608M
C
287K
F
E6
CECC Detail specification number
Assessment level
Style (see table Technical Specification)
Temperature coefficient (C = ± 50 ppm/K; E = ± 15 ppm/K)
Resistance value according to EN 60062, 4 characters
Tolerance on rated resistance (B = ± 0.1 %; F = ± 1 %)
Failure rate level according to EN 60115-1, Table ZB.1
DIMENSIONS
DIMENSIONS - chip resistor types, mass and relevant physical dimensions
TYPE H
(mm)
L
(mm)
W
(mm)
WT
(mm)
T1
(mm)
T2
(mm)
MASS
(mg)
MCS 0402 0.32 ± 0.05 1.0 ± 0.05 0.5 ± 0.05 > 75 % of W 0.2 + 0.1/- 0.15 0.2 ± 0.1 0.6
MCT 0603
0.45 + 0.1/- 0.05
1.55 ± 0.05 0.85 ± 0.1 > 75 % of W
0.3 + 0.15/- 0.2 0.3 + 0.15/- 0.2
1.9
MCU 0805
0.45 + 0.1/- 0.05
2.0 ± 0.1 1.25 ± 0.15 > 75 % of W 0.4 + 0.1/- 0.2 0.4 + 0.1/- 0.2 4.6
T2
T1
L
H
WW
T
MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01
Flat Chip Resistors with Established Reliability Vishay Beyschlag
Document Number: 28744 For technical questions, contact: ff3aresistors@vishay.com www.vishay.com
Revision: 09-Aug-06 3
DESCRIPTION
Production is strictly controlled and follows an extensive set
of instructions established for reproducibility. A
homogeneous film of metal alloy is deposited on a super high
grade (96 % Al2O3) ceramic substrate and conditioned to
achieve the desired temperature coefficient. Specially
designed inner contacts are deposited on both sides. A
special laser is used to achieve the target value by smoothly
cutting a meander groove in the resistive layer without
damaging the ceramics. For the high ohmic range, optimized
Cermet products provide comparable properties. The
resistor elements are covered by a protective coating
designed for electrical, mechanical and climatic protection.
The terminations receive a final pure tin on nickel plating.
The result of the determined production is verified by an
extensive testing procedure and optical inspection
performed on 100 % of the individual chip resistors. Only
accepted products are laid directly into the paper tape in
accordance with EN 60286-3.
ASSEMBLY
The resistors are suitable for processing on automatic
SMD assembly systems. They are suitable for automatic
soldering using wave, reflow or vapour phase as shown in
IEC 61760-1. The encapsulation is resistant to all cleaning
solvents commonly used in the electronics industry,
including alcohols, esters and aqueous solutions. The
resistors are RoHS compliant, the pure tin plating provides
compatibility with lead (Pb)-free and lead-containing
soldering processes. The immunity of the plating against tin
whisker growth has been proven under extensive testing.
All products comply with the GADSL1) and the CEFIC-
EECA-EICTA2) list of legal restrictions on hazardous
substances. This includes full compliance with the following
directives:
•2000/53/EC End of Vehicle life Directive (ELV) an Annex II
(ELV II)
•2002/95/EC Restriction of the use of Hazardous
Substances Directive (RoHS)
•2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
Solderability is specified for 2 years after production or
requalification. The permitted storage time is 20 years.
1) Global Automotive Declarable Substance List, see www.gadsl.org
2) CEFIC (European Chemical Industry Council), EECA (European
Electronic Component Manufacturers Association), EICTA
(European trade organisation representing the information and
communications technology and consumer electronics), see
www.eicta.org -> issue -> environment policy -> chemicals ->
chemicals for electronics
APPROVALS
The resistors are tested in accordance with EN 140401-801
(superseding CECC 40401-801) which refers to EN 60115-1
and EN 140400. Approval of conformity is indicated by the
CECC logo on the package label.
Vishay BEYSCHLAG has achieved "Approval of
Manufacturer" in accordance with EN 100114-1. The
release certificate for "Technology Approval Schedule" in
accordance with CECC 240 001 based on EN 100114-6 is
granted for the Vishay BEYSCHLAG manufacturing process.
SPECIALS
This product family of thin film flat chip resistors with
established reliability is complemented by Zero Ohm
Jumpers.
FUNCTIONAL PERFORMANCE
Further information on the performance of these products
may be found in the following Data Sheets:
•“Professional Chip resistors”
Document No. 28705
•“Precision Chip resistors”
Document No. 28700
MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01
Vishay Beyschlag Flat Chip Resistors with Established Reliability
www.vishay.com For technical questions, contact: ff3aresistors@vishay.com Document Number: 28744
4Revision: 09-Aug-06
Note: Resistance values to be selected for ± 1 % tolerance from E96 only and for ± 0.1 % tolerance from E192 only.
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
DESCRIPTION RESISTANCE VALUE
T.C. TOLERANCE MCS 0402 MCT 0603 MCU 0805
± 50 ppm/K ± 1 % 100 Ωto 100 kΩ10 Ωto 1 MΩ1Ωto 1 MΩ
± 15 ppm/K ± 0.1 % 100 Ωto 33 kΩ100 Ωto 47.5 kΩ100 Ωto 100 kΩ
Jumper - ≤ 20 mΩ; Imax = 0.63 A ≤ 20 mΩ; Imax = 1 A ≤ 20 mΩ; Imax = 1.5 A
ORDERING INFORMATION
Components may be ordered by using either the Product
Description, the EN 140401-801 Ordering Information or the
Part Number.
Part Number
•The resistors have a 12-digit ordering code starting with
2312.
•The subsequent 4 digits indicate the resistor type,
specification and packaging; see the Part Number table.
•The remaining 4 digits indicate the resistance value:
– The first 3 digits indicate the resistance value.
– The last digit indicates the resistance decade in
accordance with the Resistance Decade table.
Resistance Decade
Ordering example
The Part Number of a MCT 0603 VG01 resistor, value 287 k
and TC 50 with ± 1 % tolerance, supplied in cardboard tape
of 5000 units per reel is: 2312 215 02874.
RESISTANCE DECADE LAST DIGIT
1Ω to 9.99 Ω8
10 Ω to 99.9 Ω9
100 Ω to 999 Ω1
1 kΩto 9.99 kΩ2
10 kΩ to 99.9 kΩ3
100 kΩ to 999 kΩ4
1MΩ5
PART NUMBER - resistor type and packaging
DESCRIPTION
ORDERING CODE 2312 ... .....
CARDBOARD TAPE ON REEL
TYPE TCR TOL. E1
1000 UNITS
E0
10 000 UNITS
MCS 0402
± 50 ppm/K ± 1 % 260 0.... 275 0....
± 15 ppm/K ± 0.1 % 262 0.... 277 0....
jumper - 262 90001 277 90001
TYPE TCR TOL. P1
1000 UNITS
P5
5000 UNITS
PW
20 000 UNITS
MCT 0603
± 50 ppm/K ± 1 % 200 0.... 215 0.... 205 0....
± 15 ppm/K ± 0.1 % 202 0.... 217 0.... -
jumper - 202 90001 217 90001 207 90001
MCU 0805
± 50 ppm/K ± 1 % 240 0.... 255 0.... 245 0....
± 15 ppm/K ± 0.1 % 242 0.... 257 0.... -
jumper - 242 90001 257 90001 247 90001
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
