MILITARY DATA SHEET Original Creation Date: 09/18/95 Last Update Date: 12/10/96 Last Major Revision Date: 09/18/95 MNLH0003-H REV 0BL WIDE BANDWIDTH OPERATIONAL AMPLIFIER Industry Part Number NS Part Numbers LH0003 LH0003H-MIL Prime Die LH0003 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MNLH0003-H REV 0BL Electrical Characteristics DC PARAMETER (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = +15V SYMBOL PARAMETER Vio Input Offset Voltage Iio CONDITIONS Vcc = +20V NOTES PINNAME MIN Rs = 100 Ohm MAX UNIT SUBGROUPS 3 mV 1, 2, 3 Input Offset Current 0.2 uA 1, 2, 3 Iib Input Bias Current 2 uA 1, 2, 3 Is Supply Current (+) Vcc = +20V 3 mA 1, 2, 3 Av Voltage Gain Rl = 100K, Vout = +10V 20 K 1, 2, 3 Rl = 2K, Vout = +10V 15 K 1, 2, 3 Vo Output Voltage Swing Rl = 100 Ohms +10 V 1, 2, 3 CMRR Common Mode Rejection Ratio Rs = 100 Ohms, Vin = +10V 70 dB 1, 2, 3 PSRR Power Supply Rejection Ratio Rs = 100 Ohm, V = 5V to 20V 70 dB 1, 2, 3 AC PARAMETER (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Vcc = +15V, Av = 1 Sr Slew Rate (Positive Slope) 2 V/uS 9 DC PARAMETERS: DRIFT VALUES (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = +15V. "Deltas not required on B-Level product. Deltas required for S-Level product ONLY as specified on Internal Processing Instructions (IPI)." Vio Input Offset Voltage Iio Iib Vcc = +20V, Rs = 100 Ohms 1 mV 1 Input Offset Current 0.02 uA 1 Input Bias Current 0.4 uA 1 2