Original Creation Date: 09/18/95
Last Update Date: 12/10/96
Last Major Revision Date: 09/18/95
MNLH0003-H REV 0BL MILITARY DATA SHEET
WIDE BANDWIDTH OPERATIONAL AMPLIFIER
NS Part Numbers
LH0003H-MIL
Industry Part Number
LH0003
Prime Die
LH0003
Processing
MIL-STD-883, Method 5004
Quality Conformance Inspection
MIL-STD-883, Method 5005
Subgrp Description Temp ( C)
o
1 Static tests at +25
2 Static tests at +125
3 Static tests at -55
4 Dynamic tests at +25
5 Dynamic tests at +125
6 Dynamic tests at -55
7 Functional tests at +25
8A Functional tests at +125
8B Functional tests at -55
9 Switching tests at +25
10 Switching tests at +125
11 Switching tests at -55
1
MNLH0003-H REV 0BL MILITARY DATA SHEET
Electrical Characteristics
DC PARAMETER
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vcc = +15V
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
Vio Input Offset
Voltage Vcc = +20V Rs = 100 Ohm 3 mV 1, 2,
3
Iio Input Offset
Current 0.2 uA 1, 2,
3
Iib Input Bias
Current 2 uA 1, 2,
3
Is Supply Current
(+) Vcc = +20V 3 mA 1, 2,
3
Av Voltage Gain Rl = 100K, Vout = +10V 20 K 1, 2,
3
Rl = 2K, Vout = +10V 15 K 1, 2,
3
Vo Output Voltage
Swing Rl = 100 Ohms +10 V 1, 2,
3
CMRR Common Mode
Rejection Ratio Rs = 100 Ohms, Vin = +10V 70 dB 1, 2,
3
PSRR Power Supply
Rejection Ratio Rs = 100 Ohm, V = 5V to 20V 70 dB 1, 2,
3
AC PARAMETER
(The following conditions apply to all the following parameters, unless otherwise specified.)
AC: Vcc = +15V, Av = 1
Sr Slew Rate
(Positive Slope) 2 V/uS 9
DC PARAMETERS: DRIFT VALUES
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vcc = +15V. "Deltas not required on B-Level product. Deltas required for S-Level product ONLY as
specified on Internal Processing Instructions (IPI)."
Vio Input Offset
Voltage Vcc = +20V, Rs = 100 Ohms 1mV1
Iio Input Offset
Current 0.02 uA 1
Iib Input Bias
Current 0.4 uA 1
2