SRP600G-E3/73 - Vishay Presicion Group

Document Number: 88745 For technical questions within your region, please contact one of the following: www.vishay.com

Revision: 27-Oct-09 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1

Fast Switching Plastic Rectifier

SRP600A thru SRP600K

Vishay General Semiconductor

FEATURES

• Fast switching for high efficiency

• Low forward voltage drop

• Low leakage current

• High forward current operation

• High forward surge capability

• Solder dip 275 °C max. 10 s, per JESD 22-B106

• Compliant to RoHS directive 2002/95/EC and in

accordance to WEEE 2002/96/EC

TYPICAL APPLICATIONS

For use in fast switching rectification of power supply,

inverters, converters and freewheeling diodes for consumer

and telecommunication.

Note

• These devices are not AEC-Q101 qualified.

MECHANICAL DATA

Case: P600, void-free molded epoxy body

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS compliant, commercial grade

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 1A whisker test

Polarity: Color band denotes cathode end

PRIMARY CHARACTERISTICS

IF(AV) 6.0 A

VRRM 50 V to 800 V

IFSM 300 A

trr 100 ns, 150 ns, 200 ns

VF1.3 V

IR10 μA

TJ max. 125 °C

P600

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL SRP600A SRP600B SRP600D SRP600G SRP600J SRP600K UNIT

Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 V

Maximum RMS voltage VRMS 35 70 140 280 420 560 V

Maximum DC blocking voltage VDC 50 100 200 400 600 800 V

Maximum average forward rectified current

0.375" (9.5 mm) lead length at TA = 55 °C IF(AV) 6.0 A

Peak forward surge current 8.3 ms single

half sine-wave superimposed on rated load IFSM 300 A

Operating junction temperature range TJ- 50 to + 125 °C

Storage temperature range TSTG - 50 to + 150 °C

www.vishay.com For technical questions within your region, please contact one of the following: Document Number: 88745

2DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 27-Oct-09

SRP600A thru SRP600K

Vishay General Semiconductor

Note

(1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length with both leads equally heat sink

RATINGS AND CHARACTERISTICS CURVES

(TA = 25 °C unless otherwise noted)

Fig. 1 - Forward Current Derating Curves Fig. 2 - Forward Current Derating Curve

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL SRP600A SRP600B SRP600D SRP600G SRP600J SRP600K UNIT

Maximum

instantaneous

forward voltage

6.0 A VF1.3 V

Maximum DC reverse

current at rated DC

blocking voltage

TA = 25 °C

10 μA

TA = 100 °C 1.0 mA

Maximum reverse

recovery time

IF = 0.5 A, IR = 1.0 A,

Irr = 0.25 A trr 100 150 200 ns

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL SRP600A SRP600B SRP600D SRP600G SRP600J SRP600K UNIT

Typical thermal resistance RθJA (1) 10 °C/W

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

SRP600J-E3/54 2.1 54 800 13" diameter paper tape and reel

SRP600J-E3/73 2.1 73 300 Ammo pack packaging

Ambient Temperature (°C)

Average Forward Current (A)

20 40 60 80 100 120 140 160 180

1.0

2.0

3.0

4.0

5.0

6.0

7.0

1.1" x 1.1" (30 mm x 30 mm)

Copper Pads

Capacitive

Loads

5.0

= π

Resistive or Inductive Load

Lead Temperature (°C)

Average Forward Current (A)

75 80 85 90 95 100 105 110 115 120 125

1.6" x 1.6" x 0.04"

(40 mm x 40 mm x 1 mm)

Copper Heatsinks

L = Lead Length

Resistive or Inductive Load

L = 0.25" (6.3 mm)

L = 0.62" (15.9 mm)

L = 0.375" (9.5 mm)

L = 0.12" (3.2 mm)

Document Number: 88745 For technical questions within your region, please contact one of the following: www.vishay.com

Revision: 27-Oct-09 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3

SRP600A thru SRP600K

Vishay General Semiconductor

Fig. 3 - Maximum Non-Repetitive Peak Forward Surge Current

Fig. 4 - Typical Instantaneous Forward Characteristics

Fig. 5 - Typical Reverse Characteristics

Fig. 6 - Typical Thermal Resistance

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

Peak Forward Surge Current (A)

110 100

100

150

200

250

300

350

400

Number of Cycles at 60 Hz

TJ = 125 °C

TJ = 25 °C

8.3 ms Single Half Sine-Wave

Instantaneous Forward Voltage (V)

Instantaneous Forward Current (A)

0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0

0.1

100

TJ = 25 °C

Pulse Width = 300 μs

1 % Duty Cycle

Percent of Rated Peak Reverse Voltage (%)

Instantaneous Reverse Current (μA)

0.1

0.01

0 20 40 60 80 100

TJ = 25 °C

TJ = 50 °C

TJ = 100 °C

Equal Lead Len

ths to Heatsink (inches)

00.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

θJL

Thermal Resistance

from Junction to Lead (°C/W)

Copper Heatsinks

L = Lead Lengths

0.052 (1.32)

0.048 (1.22)

0.360 (9.1)

0.340 (8.6)

DIA.

1.0 (25.4)

MIN.

0.360 (9.1)

0.340 (8.6)

1.0 (25.4)

MIN.

P600

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 02-Oct-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.