Approval sheet High Capacitance Capacitors MULTILAYER CERAMIC CAPACITORS High Capacitance Series 0402 to 1812 Sizes X7R, X5R & Y5V Dielectrics RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of 16 ASC_ High Capacitance_002T_AS Aug. 2012 Approval sheet High Capacitance Capacitors 1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high capacitance MLCC offers low ESR and excellent frequency characteristics to be suited for coupling and decoupling applications in circuit. The high dielectric constant material X7R, X5R and Y5V are used for this series product. 2. FEATURES 3. APPLICATIONS a. b. a. b. Small size with high capacitance. Capacitor with lead-free termination (pure Tin). c. Digital circuit coupling or decoupling applications. For high frequency and high-density type power suppliers. For bypassing. 4. HOW TO ORDER 1206 F 106 Z 100 C T Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging Inch (mm) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) 1812 (4532) Page 2 of 16 B=X7R X=X5R F=Y5V Two significant digits K=10% followed by no. of zeros. M=20% And R is in place of Z=-20/+80% decimal point. eg.: 106=10x106 =10F Two significant digits followed by no. of zeros. And R is in place of decimal point. C=Cu/Ni/Sn T=7" reeled G=13" reeled 6R3=6.3 VDC 100=10 VDC 160=16 VDC 250=25 VDC 500=50 VDC 101=100 VDC ASC_ High Capacitance_002T_AS Aug. 2012 Approval sheet High Capacitance Capacitors 5. EXTERNAL DIMENSIONS Size Inch (mm) W (mm) T (mm)/Symbol 1.000.05 0.500.05 0.500.05 1.000.20 1.600.10 0.500.20 0.800.10 0.500.20 0.800.07 Remark MB (mm) # 0.25 +0.05/-0.10 L 0402 (1005) 0603 (1608) L (mm) N E T S 0.400.15 1.60+0.15/-0.10 0.80+0.15/-0.10 0.80+0.15/-0.10 X W 0.800.10 B 1.250.10 D # 1.250.20 I # 0.950.10 C # 1.250.10 1.600.20 D G # # 1.150.15 J # 3.20+0.30/-0.10 1.60+0.30/-0.10 1.60+0.30/-0.10 P # 0805 (2012) 1206 (3216) 2.000.15 1.250.10 2.000.20 1.250.20 3.200.15 1.600.15 3.200.20 1.600.20 3.200.30 2.500.20 1210 (3225) 3.200.40 2.500.30 4.500.40 3.200.30 4.500.40 3.200.40 1812 (4532) 0.950.10 C # 1.250.10 D # 1.600.20 2.000.20 G K # # 2.500.30 M # 1.250.10 D # 2.000.20 2.500.30 2.800.30 K M U # # # 0.500.20 MB MB Fig. 1 The outline of MLCC 0.600.20 0.750.25 0.750.25 # Reflow soldering only is recommended. Page 3 of 16 ASC_ High Capacitance_002T_AS Aug. 2012 Approval sheet High Capacitance Capacitors 6. GENERAL ELECTRICAL DATA Dielectric X7R X5R Size Y5V 0402, 0603, 0805, 1206, 1210, 1812 Capacitance range* 0.56F to 47F Capacitance tolerance** 0.027F to 100F 1F to 100F K (10%), M (20%) Rated voltage (WVDC) Z (-20/+80%) 6.3V, 10V, 16V, 25V, 50V, 100V Tan * Note 1 Insulation resistance at Ur RxC500xF Operating temperature -55 to +125C Capacitance characteristic -55 to +85C -25 to +85C 15% Termination +30/-80% Ni/Sn (lead-free termination) * Measured at 1.00.2Vrms, 1.0kHz10% for C10F; 0.50.2Vrms, 120Hz20% for C>10F, 30~70% related humidity, 25C ambient temperature for X7R, X5R and at 20C for Y5V. ** Preconditioning for Class II MLCC: Perform a heat treatment at 15010C for 1 hour, then leave in a mbient condition for 242 hours before measurement. Note 1: X7R/X5R Rated vol. D.F. Y5V Exception of D.F. 3% 0201(50V); 06030.047F; 08050.18F;12060.47F 50V 2.5% 5% 12104.7F 10% 06031F; 08051F;12064.7F; 121010F 35V 16V 10V 6.3V 4V D.F. Exception of D.F. 50V 5% 7% 35V 7% --- 25V 5% 3.5% 10% 08052.2F; 121010F 5% 02010.01F;08051F; 121010F 25V Rated vol. 3.5% 7% 06030.33F; 12064.7F 04020.10F;06030.47F; 08052.2F; 10% 12066.8F ; 121022F 02010.01F;04020.033F; 5% 08050.68F;12062.2F;12104.7F 3.5% 0402 0.47uF; 06030.68F;08052.2F; 10% 12064.7F; 121022F 04020.33F;06030.33F; 08052.2F; 10% 12062.2F;121022F 5% 15% 02010.1F; 04021F 02010.1F;04021F;060310F; 08054.7F; 15% 120647F :1210100F 10% 20% 04022.2F 15% --- Page 4 of 16 7% 9% 7% 9% 12.5% 16V 9% (C1.0F) 12.5% 10V 6.3V 20% --- 16V (C<1.0F) 12.5% 20% 06030.1F; 08050.47F; 12064.7F --04020.047F;06030.1F; 08050.33F;12061F; 12104.7F 04020.068F;06030.47F; 12064.7F; 121022F 04020.068F; 06030.68F 04020.22F 06032.2F; 08053.3F; 120610F; 121022F; 181247F 04020.47F --- --- ASC_ High Capacitance_002T_AS Aug. 2012 Approval sheet High Capacitance Capacitors 7. CAPACITANCE RANGE 7-1 X7R Dielectric DIELECTRIC X7R SIZE Capacitance Rated Voltage (VDC) 0603 0805 6.3 10 16 0.56F (564) X X X 0.68F (684) X X X 0.82F (824) X X X 1.0F (105) X X X 25 6.3 X 1.5F (155) 2.2F (225) X I 1206 10 16 25 50 D D D I I I I I I I 3.3F (335) 4.7F (475) I I I I I 6.3 10 J J J 16 25 50 100 J J P P J P J J J P P P P P P P P P P P P P P 6.8F (685) 10F (106) 22F (226) P 47F (476) The letter in cell is expressed the symbol of product thickness. DIELECTRIC X7R SIZE Rated Voltage (VDC) 1210 1812 10 16 25 50 D D D D 100 10 16 25 50 100 K D D D K K M M 0.56F (564) 0.68F (684) 0.82F (824) Capacitance 1.0F (105) 1.5F (155) M 2.2F (225) K 3.3F (335) 4.7F (475) G M K G K K K M K K M M M 6.8F (685) 10F (106) K 22F (226) 47F (476) M The letter in cell is expressed the symbol of product thickness. Page 5 of 16 ASC_ High Capacitance_002T_AS Aug. 2012 Approval sheet High Capacitance Capacitors 7-2 X5R Dielectric Dielectric X5R Size 0402 Rated Voltage (VDC) 6.3 10 16 0.027F (273) N 0.033F (333) N 0.039F (393) N 0.047F (473) 0603 25 6.3 10 0805 16 25 X X 50 6.3 1206 10 16 25 50 I 6.3 10 16 1210 25 50 6.3 10 16 25 50 N 0.056F (563) N N 0.068F (683) N N 0.082F (823) N N N 0.10F (104) N N N N N N 0.15F (154) 0.22F (224) N Capacitance 0.27uF (274) 0.33F (334) N N X 0.39F (394) X X X X X X X 0.47F (474) N N X X X 0.68F (684) N N X X X X X X X X X 0.82uF (824) 1.0F (105) N N N 1.5F (155) 2.2F (225) N X X X N X X X X 3.3F (335) 4.7F (475) E X X X D D D I I I I J J I I I I J J P I I I I P P P I I I I P P P P P P P 6.8uF (685) 10F (106) E X 22F (226) X I I I I I 47F (476) I 100F (107) P P P P P P P P P P K K K K K K K K K K K M M M M M M M M M The letter in cell is expressed the symbol of product thickness. 7-3 Y5V Dielectric DIELECTRIC Y5V SIZE 0402 RATED VOLTAGE (VDC) 1.0F (105) 0603 6.3 10 N N 6.3 16 25 S X X 1.5F (155) Capacitance 0805 10 S 2.2F (225) S S X 3.3F (335) 4.7F (475) X X 6.8F (685) 10F (106) I 22F (226) I 1206 25 50 B D D D D D D D D D D I I I I 6.3 1210 10 16 25 1.0F (105) C C C 1.5F (155) C C C 2.2F (225) C C C 3.3F (335) J J J 4.7F (475) J J J 6.8F (685) J J 10F (106) J J 22F (226) P 47F (476) 16 B Y5V SIZE RATED VOLTAGE (VDC) 10 I DIELECTRIC Capacitance 6.3 35 50 6.3 C J J P P P K 100F (107) 1812 10 16 25 C C C C C C C C C C C C C C D C C D D D G K K K 35 50 10 16 25 50 100 C D D D D D D D D D G G K D D D D D D D D D D D D D D D D D D D K M M The letter in cell is expressed the symbol of product thickness. Page 6 of 16 ASC_ High Capacitance_002T_AS Aug. 2012 Approval sheet High Capacitance Capacitors 8. PACKAGING STYLE AND QUANTITY Size 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) 1812 (4532) Thickness (mm)/Symbol 0.500.05 0.500.20 0.800.07 N E S Paper tape Plastic tape 7" reel 13" reel 7" reel 13" reel 10k 10k 4k 50k 15k - - 0.80+0.15/-0.10 X 4k 15k - - 0.800.10 1.250.10 B D 4k - 15k - 3k 10k 1.250.20 I - - 3k 10k 0.950.10 C - - 3k 10k 1.150.15 J - - 3k 10K 1.250.10 D - - 3k 10k 1.600.20 1.60+0.30/-0.10 G P - - 2k 2k 10k 9k 0.950.10 C - - 3k 10k 1.250.10 D - - 3k 10k 1.600.20 G - - 2k - 2.000.20 K - - 1k 6k 2.500.30 1.250.10 2.000.20 2.500.30 2.800.30 M D K M U - - 1k 1k 1k 0.5k 0.5k 6k 5k 3k Unit: pieces Page 7 of 16 ASC_ High Capacitance_002T_AS Aug. 2012 Approval sheet High Capacitance Capacitors 9. ELECTRICAL CHARACTERISTICS Typical Impedance/ESR vs. Frequency 0805F106_10V 1000 100 100 10 10 Ohm Ohm 1206X106_10V 1000 IZI 1 0.1 IZI 1 0.1 ESR 0.01 0.01 ESR 0.001 0.001 1 10 100 1,000 10,000 1 10 100 Frequency (kHz) 1,000 10,000 Frequency (kHz) Fig. 2 ESR and IZI vs. frequency (1206X106_10V) Fig. 3 ESR and IZI vs. frequency (0805F106_10V) 0805F475_10V 0603X105_10V 10000 1000 1000 100 100 Ohm Ohm 10 IZI 1 10 IZI 1 0.1 0.1 ESR ESR 0.01 0.01 0.001 1 10 100 1,000 10,000 100,000 1 Frequency (kHz) 100 1,000 10,000 Frequency (kHz) Fig. 4 ESR and IZI vs. frequency (0805F475_10V) Page 8 of 16 10 Fig. 5 ESR and IZI vs. frequency (0603X105_10V) ASC_ High Capacitance_002T_AS Aug. 2012 Approval sheet High Capacitance Capacitors 10. RELIABILITY TEST CONDITIONS AND REQUIREMENTS No. 1. Item Visual and Test Condition --- * No remarkable defect. Mechanical 2. 3. Capacitance Q/ D.F. * Dimensions to conform to individual specification sheet. Class I: NP0 Cap1000pF 1.00.2Vrms, 1MHz10% Cap>1000pF 1.00.2Vrms, 1KHz10% (Dissipation Factor) Requirements Class II: X7R,X7E, X5R,Y5V Cap10F, 1.00.2Vrms, 1kHz10% ** Cap>10F, 0.50.2Vrms, 120Hz20% * Shall not exceed the limits given in the detailed spec. NP0: Cap30pF, Q1000; Cap<30pF,Q400+20C X7R, X5R: Rated D.F. vol. Exception of D.F. 3% 0201(50V); 06030.047F; 08050.18F;12060.47F 50V 2.5% 5% 12104.7F ** Test condition: 0.50.2Vrms1KHz10% X7R: 0603225(10V), 0805=106(6.3V&10V) X5R: 01R5103, 0201224 (6.3V), 0402475 (6.3V), 0402225(10V), 0603=106 (6.3V), 0603475(10V) 10% 06031F; 08051F;12064.7F; 121010F 35V 3.5% 10% 08052.2F; 121010F 5% 02010.01F;08051F; 121010F 25V 16V 10V 6.3V 4V 3.5% 7% 06030.33F; 12064.7F 04020.10F;06030.47F; 08052.2F; 10% 12066.8F ; 121022F 02010.01F;04020.033F; 5% 08050.68F;12062.2F;12104.7F 3.5% 0402 0.47uF; 06030.68F;08052.2F; 10% 12064.7F; 121022F 04020.33F;06030.33F; 08052.2F; 10% 12062.2F;121022F 5% 15% 02010.1F; 04021F 02010.1F;04021F;060310F; 08054.7F; 15% 120647F :1210100F 10% 20% 04022.2F 15% Y5V: Rated vol. --- D.F. 50V 5% 35V 7% 25V 5% 16V (C<1.0F) 7% 16V 9% (C1.0F) 10V 6.3V 4. Dielectric * To apply voltage (100V) 250%. Strength * Duration: 1 to 5 sec. 12.5% 20% --Exception of D.F. 06030.1F; 08050.47F; 7% 12064.7F ----04020.047F;06030.1F; 7% 08050.33F;12061F; 12104.7F 04020.068F;06030.47F; 9% 12064.7F; 121022F 9% 04020.068F; 06030.68F 12.5% 04020.22F 06032.2F; 08053.3F; 12.5% 120610F; 121022F; 181247F 20% 04020.47F ----- * No evidence of damage or flash over during test. * Charge and discharge current less than 50mA. 5. Insulation To apply rated voltage for max. 120 sec. Resistance 10G or RxC500-F whichever is smaller. Class II (X7R, X5R, Y5V) Insulation Resistance Rated voltage 100V: X7R 50V:06031F;08051F;12064.7F;12104.7F 35V:08052.2F;121010F 25V:04021F;06032.2F;08052.2F;120610F;121010F 16V:04020.22F;06031F;08052.2F;120610F;121047F 10V:020147nF;04020.47F;06030.47F;08052.2F; 12064.7F;121047F 6.3V ; 4V 6. Temperature With no electrical load. Coefficient T.C. Operating Temp T.C. NPO -55~125C at 25C NPO Within 30ppm/C X7R -55~125C at 25C X7R Within 15% X5R -55~ 85C at 25C X5R Within 15% Y5V -25~ 85C at 20C Y5V Within +30%/-80% Page 9 of 16 10G or RxC100 -F whichever is smaller. Capacitance Change ASC_ High Capacitance_002T_AS Aug. 2012 Approval sheet High Capacitance Capacitors No. 7. Item Adhesive Strength of Termination Test Condition Requirements * Pressurizing force * No remarkable damage or removal of the terminations. 5N (0603) and 10N (>0603) * Test time: 101 sec. 8. Vibration Resistance * Vibration frequency: 10~55 Hz/min. * No remarkable damage. * Total amplitude: 1.5mm * Cap change and Q/D.F.: To meet initial spec. * Test time: 6 hrs. (Two hrs each in three mutually perpendicular directions.) 9. Solderability * Solder temperature: 2355C 95% min. coverage of all metalized area. * Dipping time: 20.5 sec. 10. Bending Test * The middle part of substrate shall be pressurized by * No remarkable damage. means of the pressurizing rod at a rate of about 1 mm per * Cap change second until the deflection becomes 1 mm and then the NP0: within 5% or 0.5pF whichever is larger pressure shall be maintained for 51 sec. X7R, X5R: within 12.5% * Measurement to be made after keeping at room temp. for 242 hrs. (Class I) or 484 hrs. (Class II). Y5V: within 30% (This capacitance change means the change of capacitance under specified flexure of substrate from the capacitance measured before the test.) 11. Resistance to * Solder temperature: 2605C * No remarkable damage. Soldering Heat * Dipping time: 101 sec * Cap change: * Preheating: 120 to 150C for 1 minute before imme rse NP0: within 2.5% or 0.25pF whichever is larger the capacitor in a eutectic solder. X7R, X5R: within 7.5% * Before initial measurement (Class II only): Perform Y5V: within 20% 150+0/-10C for 1 hr and then set for 484 hrs at r oom * Q/D.F., I.R. and dielectric strength: To meet initial requirements. temp. * 25% max. leaching on each edge. * Measurement to be made after keeping at room temp. for 242 hrs. (Class I) or 484 hrs. (Class II). 12. Temperature Cycle * Conduct the five cycles according to the temperatures and time. Step Temp. (C) Time (min.) 1 Min. operating temp. +0/-3 303 2 Room temp. 2~3 3 Max. operating temp. +3/-0 303 4 Room temp. 2~3 * No remarkable damage. * Cap change NP0: within 2.5% or 0.25pF whichever is larger X7R, X5R: within 7.5% Y5V: within 20% * Q/D.F., I.R. and dielectric strength: To meet initial requirements. * Before initial measurement (Class II only): Perform 150+0/-10C for 1 hr and then set for 484 hrs at r oom temp. * Measurement to be made after keeping at room temp. for 242 hrs. (Class I) or 484 hrs. (Class II). Page 10 of 16 ASC_ High Capacitance_002T_AS Aug. 2012 Approval sheet High Capacitance Capacitors No. 13. Item Humidity (Damp Heat) Steady State Test Condition * Test temp.: 402C * Humidity: 90~95% RH * Test time: 500+24/-0hrs. * Measurement to be made after keeping at room temp. for 242 hrs. (Class I) or 484 hrs. (Class II). Requirements * No remarkable damage. * Cap change: NP0: within 5% or 0.5pF whichever is larger X7R, X7E, X5R: 10V**,within 12.5%;6.3V within 25%; TT series & C 1uF,within 25% **10V:06034.7F;04021F;02010.1F, within 25%; Y5V: 10V, within 30%; 6.3V, within +30/-40% * Q/D.F. value: NP0: More than 30pF Q350, 10pFC30pF, Q275+2.5C Less than 10pF Q200+10C X7R, X5R: Rated D.F. Exception of D.F. vol. 6% 50V 3% 0201(50V);06030.047F; 08050.18F; 12060.47F 10% 12104.7F 20% 06031F; 08051F;12064.7F; 121010F 35V 5% 20% 08052.2F;121010F 10% 02010.01F;08051F; 121010F 25V 16V 10V 6.3V 4V 14% 06030.33F;12064.7F 04020.10F;06030.47F;08052.2F;12066.8F; 15% 121022F 10% 06030.15F;08050.68F;12062.2F;12104.7F 5 02010.01F;04020.033F;06030.68F;08052.2F; 15% 12064.7F; 121022F 04020.33F; 06030.33F;08052.2F; 15% 12062.2F; 121022F 7.5% 20% 02010.1F ;04021F 02010.1F;04021F;060310F; 15% 30% 08054.7F;120647F;1210100F 20% ----5% Y5V: Rated vol. D.F. 50V 7.5% Exception of D.F. 06030.1F; 08050.47F; 10% 12064.7F 35V 10% ----04020.047F;06030.1F; 10% 08050.33F;12061F; 25V 7.5% 12104.7F 04020.068F;06030.47F; 15% 12064.7F; 121022F 12.5% 04020.068F; 06030.68F 16V 10% (C<1.0F) 20% 04020.22F 06032.2F; 08053.3F; 16V 12.5% 20% 120610F;121022F; (C1.0F) 181247F; 10V 20% 30% 04020.47F 6.3V 30% ----- *I.R.: 10V, 1G or 50 -F whichever is smaller. Class II (X7R, X5R, Y5V) Rated voltage Insulation Resistance 100V: X7R 50V:06031F;08051F;12064.7F;12104.7F 35V:08052.2F;121010F 25V:04021F;06032.2F;08052.2F;120610F;121010F 16V:04020.22F;06031F;08052.2F;120610F;121047F 10V:020147nF;04020.47F;06030.47F;08052.2F; 12064.7F;121047F 6.3V ; 4V Page 11 of 16 ASC_ High Capacitance_002T_AS 1G or RxC 10 -F whichever is smaller. Aug. 2012 Approval sheet High Capacitance Capacitors No 14 Item Humidity (Damp Heat) Load Test Condition * Test temp.: 402C * Humidity: 90~95%RH * Test time: 500+24/-0 hrs. * To apply voltagerated voltage. * Measurement to be made after keeping at room temp. for 242 hrs. (Class I) or 484 hrs. (Class II). Requirements * No remarkable damage. Cap change: NP0: 7.5% or 0.75pF whichever is larger. X7R, X7E, X5R: 10V**,within 12.5%;6.3V within 25%; TT series & C 1uF,within 25% **10V:06034.7F;04021F;02010.1F, within 25%; Y5V: 10V, within 30%; 6.3V, within +30/-40% Q/D.F. value: NP0: C30pF,Q200;C<30pF, Q100+10/3C X7R, X5R: Rated D.F. Exception of D.F. vol. 6% 50V 3% 0201(50V);06030.047F; 08050.18F; 12060.47F 10% 12104.7F 20% 06031F; 08051F;12064.7F; 121010F 35V 5% 20% 08052.2F;121010F 10% 02010.01F;08051F; 121010F 25V 16V 10V 6.3V 4V 14% 06030.33F;12064.7F 04020.10F;06030.47F;08052.2F;12066.8F; 15% 121022F 10% 06030.15F;08050.68F;12062.2F;12104.7F 5 02010.01F;04020.033F;06030.68F;08052.2F; 15% 12064.7F; 121022F 04020.33F; 06030.33F;08052.2F; 15% 12062.2F; 121022F 7.5% 20% 02010.1F ;04021F 02010.1F;04021F;060310F; 15% 30% 08054.7F;120647F;1210100F 20% ----5% Y5V: Rated vol. D.F. 50V 7.5% Exception of D.F. 06030.1F; 08050.47F; 10% 12064.7F 35V 10% ----04020.047F;06030.1F; 10% 08050.33F;12061F; 25V 7.5% 12104.7F 04020.068F;06030.47F; 15% 12064.7F; 121022F 12.5% 04020.068F; 06030.68F 16V 10% (C<1.0F) 20% 04020.22F 06032.2F; 08053.3F; 16V 12.5% 20% 120610F;121022F; (C1.0F) 181247F; 10V 20% 30% 04020.47F 6.3V 30% ----- *I.R.: 10V, 500M or 25 -F whichever is smaller. Class II (X7R, X5R, Y5V) Rated voltage Insulation Resistance 100V: X7R 50V:06031F;08051F;12064.7F;12104.7F 35V:08052.2F;121010F 25V:04021F;06032.2F;08052.2F;120610F;121010F 16V:04020.22F;06031F;08052.2F;120610F;121047F 10V:020147nF;04020.47F;06030.47F;08052.2F; 12064.7F;121047F 6.3V ; 4V Page 12 of 16 ASC_ High Capacitance_002T_AS 500M or RxC5 -F whichever is smaller. Aug. 2012 Approval sheet High Capacitance Capacitors No 15. Item High Temperature Load (Endurance) Test Condition *Test temp. NP0, X7R/X7E: 1253C X5R, Y5V: 853C *Test time: 1000+24/-0 hrs. *To apply voltage: (1) 6.3V or C10F or TT series: 150% of rated voltage. (2) 10VUr<500V: 200% of rated voltage. (3) 500V: 150% of rated voltage. (4) Ur630V: 120% of rated voltage. (5) 100% of rated voltage for below range. Dielec tric Rated voltage Capacitance range 0201 X5R 6.3V,10V C0.1F 0402 X5R, 6.3V,10V C1.0F 0603 X5R 6.3V,10V C4.7F Size 0805 X5R 6.3V C22F X5R 6.3V C47F NP0 3000V C1.5pF 1206 Requirements * No remarkable damage. Cap change: NP0: 3.0% or 0.3pF whichever is larger X7R, X7E, X5R: 10V**,within 12.5%;6.3V within 25%; TT series & C 1uF,within 25% **10V:06034.7F;04021F;02010.1F, within 25%; Y5V: 10V, within 30%; 6.3V, within +30/-40% Q/D.F. value: NP0: More than 30pF, Q350 10pFC<30pF, Q275+2.5C Less than 10pF, Q200+10C X7R, X5R: Rated D.F. Exception of D.F. vol. 6% 50V 3% 20% 06031F; 08051F;12064.7F; 121010F 35V 25V 16V 0402 0603 0805 X5R Y5V X5R Y5V X5R Y5V Rated voltage Capacitance range 10V,16V, C0.22F 25V C0.47F 10V,16V C1.0F 16V C2.2F 10V C4.7F 16V C4.7F 10V 16V * Measurement to be made after keeping at room temp. for 242 hrs. (Class I) or 484 hrs. (Class II). 5% 20% 08052.2F;121010F 10% 02010.01F;08051F; 121010F (6)150% of rated voltage for below range. Size Dielectric 0201(50V);06030.047F; 08050.18F; 12060.47F 10% 12104.7F 6.3V 4V 14% 06030.33F;12064.7F 04020.10F;06030.47F;08052.2F;12066.8F; 15% 121022F 10% 06030.15F;08050.68F;12062.2F;12104.7F 5 02010.01F;04020.033F;06030.68F;08052.2F; 15% 12064.7F; 121022F 04020.33F; 06030.33F;08052.2F; 15% 12062.2F; 121022F 7.5% 20% 02010.1F ;04021F 02010.1F;04021F;060310F; 15% 30% 08054.7F;120647F;1210100F 20% ----5% Y5V: Rated vol. D.F. Exception of D.F. 06030.1F; 08050.47F; 50V 7.5% 10% 12064.7F 35V 10% ----04020.047F;06030.1F; 10% 08050.33F;12061F; 25V 7.5% 12104.7F 04020.068F;06030.47F; 15% 12064.7F; 121022F 12.5% 04020.068F; 06030.68F 16V 10% (C<1.0F) 20% 04020.22F 06032.2F; 08053.3F; 16V 12.5% 20% 120610F;121022F; (C1.0F) 181247F; 10V 20% 30% 04020.47F 6.3V 30% ----- *I.R.: 10V, 1G or 50 -F whichever is smaller. Class II (X7R, X5R, Y5V) Rated voltage Insulation Resistance 100V: X7R 50V:06031F;08051F;12064.7F;12104.7F 35V:08052.2F;121010F 25V:04021F;06032.2F;08052.2F;120610F;121010F 16V:04020.22F;06031F;08052.2F;120610F;121047F 10V:020147nF;04020.47F;06030.47F;08052.2F; 12064.7F;121047F 6.3V ; 4V Page 13 of 16 ASC_ High Capacitance_002T_AS 1G or RxC 10 -F whichever is smaller. Aug. 2012 Approval sheet High Capacitance Capacitors APPENDIXES Tape & reel dimensions Fig. 6 The dimension of paper tape Fig. 7 The dimension of plastic tape Size 0402 0603 Thickness N S, X 0805 1210 1812 B C, J, D G,P C, D G, K M D, K M U 0.620.05 1.020.05 1.500.10 1.500.10 <1.57 2.000.10 <1.85 <1.95 <2.97 <2.97 <2.97 <3.81 <3.81 <3.90 B0 1.120.05 1.800.05 2.300.10 2.300.10 <2.40 3.500.10 <3.46 <3.67 <3.73 <3.73 <3.73 <5.30 <5.30 <5.30 T 0.600.05 0.950.05 0.750.05 0.950.05 0.230.05 0.950.05 0.230.05 0.230.05 0.230.05 0.230.05 0.230.05 0.250.05 0.250.05 0.250.05 K0 - - - B 1206 C, D, I A0 A - <2.50 - <2.50 <2.50 <2.50 <2.50 <3.00 <2.50 <3.00 <3.50 W 8.000.10 8.000.10 8.000.10 8.000.10 8.000.10 8.000.10 8.000.10 8.000.10 8.000.10 8.000.10 8.000.10 12.00.20 12.00.20 12.00.20 P0 4.000.10 4.000.10 4.000.10 4.000.10 4.000.10 4.000.10 4.000.10 4.000.10 4.000.10 4.000.10 4.000.10 4.000.10 4.000.10 4.000.10 10xP0 40.00.10 40.00.10 40.00.10 40.00.10 40.00.10 40.00.10 40.00.10 40.00.10 40.00.10 40.00.10 40.00.10 40.00.10 40.00.10 40.00.20 P1 2.000.05 4.000.10 4.000.10 4.000.10 4.000.10 4.000.10 4.000.10 4.000.10 4.000.10 4.000.10 4.000.10 8.000.10 8.000.10 8.000.10 P2 2.000.05 2.000.05 2.000.05 2.000.05 2.000.05 2.000.05 2.000.05 2.000.05 2.000.05 2.000.05 2.000.05 2.000.05 2.000.05 2.000.05 D0 1.550.05 1.550.05 1.550.05 1.550.05 1.500.05 1.500.05 1.500.05 1.500.05 1.500.05 1.500.05 1.500.05 1.500.05 1.500.05 1.500.10 D1 - - - - 1.000.10 - 1.000.10 1.000.10 1.000.10 1.000.10 1.000.10 1.500.10 1.500.10 1.500.10 E 1.750.05 1.750.05 1.750.05 1.750.05 1.750.10 1.750.10 1.750.10 1.750.10 1.750.10 1.750.10 1.750.10 1.750.10 1.750.10 1.750.10 F 3.500.05 3.500.05 3.500.05 3.500.05 3.500.05 3.500.05 3.500.05 3.500.05 3.500.05 3.500.05 3.500.05 5.500.05 5.500.05 5.500.05 Size Reel size C W1 A N 0402, 0603, 0805, 1206, 1210 7" 10" 13" 13.0+0.5/-0.2 13.0+0.5/-0.2 13.0+0.5/-0.2 8.4+1.5/-0 8.4+1.5/-0 8.4+1.5/-0 178.00.10 250.01.0 330.01.0 60.0+1.0/-0 100.01.0 1001.0 1812 7" 13.0+0.5/-0.2 12.4+2.0/-0 178.00.10 60.0+1.0/-0 Fig. 8 The dimension of reel Page 14 of 16 ASC_ High Capacitance_002T_AS Aug. 2012 Approval sheet High Capacitance Capacitors Description of customer label a. Customer name b. WTC order series and item number c. Customer P/O d. Customer P/N e. Description of product f. Quantity g. Bar code including quantity & WTC P/N or customer h. WTC P/N i. Shipping date j. Order bar code including series and item numbers k. Serial number of label Constructions No. Name X7R, X5R, Y5V 1 Ceramic material BaTiO3 based 2 Inner electrode Ni 3 4 Termination 5 Inner layer Cu Middle layer Ni Outer layer Sn (Matt) Fig. 9 The construction of MLCC Storage and handling conditions (1) To store products at 5 to 40C ambient temperature and 20 to 70%. related humidity conditions. (2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed. Cautions: a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability. Do not store the capacitors in the ambience of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas etc.) b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low reliability. c. Due to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by direct sunlight,the solderability and electrical performance may deteriorate. Do not store capacitors under direct sunlight or dewing condition. To store products on the shelf and avoid exposure to moisture. . Page 15 of 16 ASC_ High Capacitance_002T_AS Aug. 2012 Approval sheet High Capacitance Capacitors Recommended soldering conditions The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and concentration of N2 within oven are recommended. 4 / sec max Over 60sec at least by natural cooling Fig. 10 Recommended reflow soldering profile for SMT process with SnAgCu series solder paste. Page 16 of 16 Fig. 11 Recommended wave soldering profile for SMT process with SnAgCu series solder. ASC_ High Capacitance_002T_AS Aug. 2012