1.6x0.8mm INFRARED EMITTING DIODE Part Number: APT1608SF4C-PRV Features Description z 1.6mmX0.8mm SMT LED, 0.75mm thickness. SF4 Made with Gallium Aluminum Arsenide Infrared Emit- z Mechanically and spectrally matched to phototransistor. ting diodes. z Package: 2000pcs / reel . z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ0126 REV NO: V.3B DATE: DEC/28/2011 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203008849 Selection Guide Part No. APT1608SF4C-PRV Dice Lens Type SF4 (GaAlAs) Po (mW/sr) [2] @ 20mA Viewing Angle [1] Min. Typ. 21/2 0.8 1.5 120 Water Clear Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Radiant Intensity/ luminous flux: +/-15%. 3. Radiant intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage [1] SF4 VF 1.3 1.6 V IF=20mA Reverse Current SF4 IR 10 uA VR = 5V Capacitance SF4 C 90 pF VF=0V;f=1MHz Peak Spectral Wavelength SF4 P 880 nm IF=20mA Spectral Bandwidth SF4 1/2 50 nm IF=20mA Note: 1. Forward Voltage: +/-0.1V. 2. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Symbol SF4 Units Power dissipation PD 80 mW DC Forward Current IF 50 mA Peak Forward Current [1] iFS 1.2 A Reverse Voltage VR 5 V Operating Temperature TA -40 To +85 C TSTG -40 To +85 C Storage Temperature Note: 1. 1/100 Duty Cycle, 10s Pulse Width. SPEC NO: DSAJ0126 REV NO: V.3B DATE: DEC/28/2011 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203008849 APT1608SF4C-PRV SPEC NO: DSAJ0126 REV NO: V.3B DATE: DEC/28/2011 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203008849 APT1608SF4C-PRV Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAJ0126 REV NO: V.3B DATE: DEC/28/2011 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203008849 PACKING & LABEL SPECIFICATIONS APT1608SF4C-PRV SPEC NO: DSAJ0126 REV NO: V.3B DATE: DEC/28/2011 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203008849