Features
n RoHS compliant* and halogen free**
n Surface Mount SMC package
n Breakdown Voltage: 6.8 to 550 volts
n Peak Pulse Power: 1500 watts
n Typical temperature coefficient:
∆VBR = 0.1 % x VBR @ 25 °C x ∆T
Applications
n IEC 61000-4-2 ESD (Min. Level 4)
n IEC 61000-4-4 EFT
n IEC 61000-4-5 Surge
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)
1.5SMC Transient Voltage Suppressor Diode Series
* RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
**Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br)
and Chlorine (Cl) content is 1500 ppm or less.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Parameter Symbol Value Unit
Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 1500 Watts
Peak Forward Surge Current
8.3 ms Single Half Sine Wave Superimposed on Rated Load
(JEDEC Method) (Note 3)
IFSM 200 Amps
Maximum Instantaneous Forward Voltage @ IPP = 100 A
(For Unidirectional Units Only)
1.5SMC6.8A ~ 1.5SMC200A
1.5SMC220A ~1.5SMC550A VF
3.5
5.0 Volts
Operating Temperature Range TJ-55 to +150 °C
Storage Temperature Range TSTG -55 to +150 °C
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.
2. Thermal Resistance Junction to Lead.
3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
General Information
The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop
increasingly smaller electronic components.
Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC)
size format. The Transient Voltage Suppressor series offers a choice of Breakdown Voltages from 6.8 V up to 550 V. Typical fast response
times are less than 1.0 picosecond for unidirectional devices and less than 5.0 picoseconds for bidirectional devices from 0 V to Minimum
Breakdown Voltage.
Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and their at conguration
minimizes roll away.
How to Order
1.5SMC 6.8 CA - H
Series
1.5SMC = SMC/DO-214AB
Breakdown Voltage
6.8 to 550 = 6.8 to 550 VBD
Sufx
A = 5 % Tolerance Unidirectional Device
CA = 5 % Tolerance Bidirectional Device
Reel
(blank) = 13 inch reel
-H = 7 inch reel
Asia-Pacic:
Tel: +886-2 2562-4117
Email: asiacus@bourns.com
Europe:
Tel: +36 88 520 390
Email: eurocus@bourns.com
The Americas:
Tel: +1-951 781-5500
Email: americus@bourns.com
www.bourns.com
*RoHS COMPLIANT
LEAD FREE
*RoHS COMPLIANT
&
**HALOGEN FREE
LEAD FREE
VERSIONS ARE
RoHS COMPLIANT*
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
1.5SMC Transient Voltage Suppressor Diode Series
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)
Notes:
1. Sufx ‘A’ denotes a 5 % tolerance unidirectional device. 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double.
2. Sufx ‘CA’ denotes a 5 % tolerance bidirectional device.
Unidirectional Device Bidirectional Device Breakdown Voltage
VBR (Volts)
Working Peak
Reverse
Voltage
Maximum
Reverse
Leakage
@ VRWM
Maximum
Reverse
Voltage
@ IRSM
Maximum
Reverse
Surge
Current
Part No. Marking Part No. Marking Min. Max. @ IT (mA) VRWM (V) IR (μA) VRSM (V) IRSM (A)
1.5SMC6.8A 6V8A 1.5SMC6.8CA 6V8C 6.45 7.14 10 5.8 1000 10.5 144.8
1.5SMC7.5A 7V5A 1.5SMC7.5CA 7V5C 7.13 7.88 10 6.4 500 11.3 134.5
1.5SMC8.2A 8V2A 1.5SMC8.2CA 8V2C 7.79 8.61 10 7.02 200 12.1 125.6
1.5SMC9.1A 9V1A 1.5SMC9.1CA 9V1C 8.65 9.5 1 7.78 50 13.4 113.4
1.5SMC10A 10A 1.5SMC10CA 10C 9.5 10.5 1 8.55 10 14.5 104.8
1.5SMC11A 11A 1.5SMC11CA 11C 10.5 11.6 1 9.4 5 15.6 97.4
1.5SMC12A 12A 1.5SMC12CA 12C 11.4 12.6 1 10.2 5 16.7 91
1.5SMC13A 13A 1.5SMC13CA 13C 12.4 13.7 1 11.1 1 18.2 83.5
1.5SMC15A 15A 1.5SMC15CA 15C 14.3 15.8 1 12.8 1 21.2 71.7
1.5SMC16A 16A 1.5SMC16CA 16C 15.2 16.8 1 13.6 1 22.5 67.6
1.5SMC18A 18A 1.5SMC18CA 18C 17.1 18.9 1 15.3 1 25.2 60.3
1.5SMC20A 20A 1.5SMC20CA 20C 19 21 1 17.1 1 27.7 54.9
1.5SMC22A 22A 1.5SMC22CA 22C 20.9 23.1 1 18.8 1 30.6 49.7
1.5SMC24A 24A 1.5SMC24CA 24C 22.8 25.2 1 20.5 1 33.2 45.8
1.5SMC27A 27A 1.5SMC27CA 27C 25.7 28.4 1 23.1 1 37.5 40.5
1.5SMC30A 30A 1.5SMC30CA 30C 28.5 31.5 1 25.6 1 41.4 36.7
1.5SMC33A 33A 1.5SMC33CA 33C 31.4 34.7 1 28.2 1 45.7 33.3
1.5SMC36A 36A 1.5SMC36CA 36C 34.2 37.8 1 30.8 1 49.9 30.5
1.5SMC39A 39A 1.5SMC39CA 39C 37.1 41 1 33.3 1 53.9 28.2
1.5SMC43A 43A 1.5SMC43CA 43C 40.9 45.2 1 36.8 1 59.3 25.6
1.5SMC47A 47A 1.5SMC47CA 47C 44.7 49.4 1 40.2 1 64.8 23.5
1.5SMC51A 51A 1.5SMC51CA 51C 48.5 53.6 1 43.6 1 70.1 21.7
1.5SMC56A 56A 1.5SMC56CA 56C 53.2 58.8 1 47.8 1 77 19.7
1.5SMC62A 62A 1.5SMC62CA 62C 58.9 65.1 1 53 1 85 17.9
1.5SMC68A 68A 1.5SMC68CA 68C 64.6 71.4 1 58.1 1 92 16.5
1.5SMC75A 75A 1.5SMC75CA 75C 71.3 78.8 1 64.1 1 103 14.8
1.5SMC82A 82A 1.5SMC82CA 82C 77.9 86.1 1 70.1 1 113 13.5
1.5SMC91A 91A 1.5SMC91CA 91C 86.5 95.5 1 77.8 1 125 12.2
1.5SMC100A 100A 1.5SMC100CA 100C 95 105 1 85.5 1 137 11.1
1.5SMC110A 110A 1.5SMC110CA 110C 105 116 1 94 1 152 10
1.5SMC120A 120A 1.5SMC120CA 120C 114 126 1 102 1 165 9.2
1.5SMC130A 130A 1.5SMC130CA 130C 124 137 1 111 1 179 8.5
1.5SMC150A 150A 1.5SMC150CA 150C 143 158 1 128 1 207 7.3
1.5SMC160A 160A 1.5SMC160CA 160C 152 168 1 136 1 219 6.9
1.5SMC170A 170A 1.5SMC170CA 170C 162 179 1 145 1 234 6.5
1.5SMC180A 180A 1.5SMC180CA 180C 171 189 1 154 1 246 6.2
1.5SMC200A 200A 1.5SMC200CA 200C 190 210 1 171 1 274 5.5
1.5SMC220A 220A 1.5SMC220CA 220C 209 231 1 185 1 328 4.6
1.5SMC250A 250A 1.5SMC250CA 250C 237 263 1 214 1 344 4.4
1.5SMC300A 300A 1.5SMC300CA 300C 285 315 1 256 1 414 3.7
1.5SMC350A 350A 1.5SMC350CA 350C 332 368 1 300 1 482 3.2
1.5SMC400A 400A 1.5SMC400CA 400C 380 420 1 342 1 548 2.8
1.5SMC440A 440A 1.5SMC440CA 440C 418 462 1 376 1 602 2.5
1.5SMC480A 480A 1.5SMC480CA 480C 456 504 1 408 1 658 2.3
1.5SMC510A 510A 1.5SMC510CA 510C 485 535 1 434 1 698 2.1
1.5SMC530A 530A 1.5SMC530CA 530C 503.5 556.5 1 477 1 725 2.1
1.5SMC540A 540A 1.5SMC540CA 540C 513 567 1 486 1 740 2
1.5SMC550A 550A 1.5SMC550CA 550C 522.5 577.5 1 495 1 760 2
3312 - 2 mm SMD Trimming Potentiometer 1.5SMC Transient Voltage Suppressor Diode Series
Rating & Characteristic Curves
Pulse Derating Curve Maximum Non-Repetitive Surge Current
Pulse Waveform Typical Junction Capacitance
Pulse Rating Curve Steady State Power Derating Curve
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
100
75
50
25
0
050
25 75 100 150125 175 200
Ambient Temperature (
Peak Pulse Derating in Percent of
Peak Power or Current
°C)
10 x 1000 Waveform as Defined
by R.E.A.
5.0
3.0
4.0
2.0
1.0
0.0
05025 75 100 150125 175 200
TL, Lead Temperature (°C)
RM(AV) Steady State Power Dissipation (W)
60 Hz Resistive or
Inductive Load
100
50
0
0 1.0 2.0 3.0 4.0
T, Time (ms)
IP, Peak Pulse Current (%)
TA=25 °C
TP
TR=10 µs
Half value= IRSM
2
Peak value (IRSM)
Pulse width (TP)
is defined as that point
where the peak current
decays to 50 % of IPSM.
10 x 1000 waveform
as defined by R.E.A.
Peak Forward Surge Current (Amps)
100
200
10
12510 20 50 100
Number of Cycles at 60 Hz
Pulse Width 8.3 ms
Single Half Sine-Wave
(JEDEC Method)
100
1.0
10
0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms
TP, Pulse Width
PP, Peak Power (KW)
td - Pulse Width (Seconds)
Copper Pad Areas
1
10
100
10 ms0.1 µs 1 µs 10 µs 100 µs 1 ms
0.31 x 031 ” (8.0 x 8.0 mm)
Non-repetitive pulse
waveform
TA = 25 °C
Copper Pad Areas
P
PPM
- Peak Pulse Power (kW)
1
10
100
1000
10000
100000
1 10 100 1000
Unidirectional @ VR
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
CJ
-
Junction Capacitance (pF)
Bidirectional V = 0 V
Unidirectional V = 0 V
Bidirectional @ VR
VBR - Reverse Breakdown Voltage (V)
0
20
40
60
80
100
120
140
160
180
200
001011
Number of Cycles at 60 Hz
I
FSM
- Peak Forward Surge Current (A)
100
1.0
10
0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms
TP, Pulse Width
PP, Peak Power (KW)
TA = 25 °C
Non-repetitive Pulse Waveform
Shown in Pulse Waveform Graph
100
75
50
25
0
05025 75 100 150125 175 200
Ambient Temperature (
Peak Pulse Derating in Percent of
Peak Power or Current
°C)
10 x 1000 Waveform as Defined
by R.E.A.
5.0
3.0
4.0
2.0
1.0
0.0
05025 75 100 150125 175 200
TL, Lead Temperature (°C)
RM(AV) Steady State Power Dissipation (W)
60 Hz Resistive or
Inductive Load
100
50
0
0 1.0 2.0 3.0 4.0
T, Time (ms)
IP, Peak Pulse Current (%)
TA=25 °C
TP
TR=10 µs
Half value= IRSM
2
Peak value (IRSM)
Pulse width (TP)
is defined as that point
where the peak current
decays to 50 % of IPSM.
10 x 1000 waveform
as defined by R.E.A.
Peak Forward Surge Current (Amps)
100
200
10
12510 20 50 100
Number of Cycles at 60 Hz
Pulse Width 8.3 ms
Single Half Sine-Wave
(JEDEC Method)
100
1.0
10
0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms
TP, Pulse Width
PP, Peak Power (KW)
td - Pulse Width (Seconds)
Copper Pad Areas
1
10
100
10 ms0.1 µs 1 µs 10 µs 100 µs 1 ms
0.31 x 031 ” (8.0 x 8.0 mm)
Non-repetitive pulse
waveform
TA = 25 °C
Copper Pad Areas
P
PPM
- Peak Pulse Power (kW)
1
10
100
1000
10000
100000
1 10 100 1000
Unidirectional @ VR
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
CJ
-
Junction Capacitance (pF)
Bidirectional V = 0 V
Unidirectional V = 0 V
Bidirectional @ VR
VBR - Reverse Breakdown Voltage (V)
0
20
40
60
80
100
120
140
160
180
200
001011
Number of Cycles at 60 Hz
I
FSM
- Peak Forward Surge Current (A)
100
1.0
10
0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms
TP, Pulse Width
PP, Peak Power (KW)
TA = 25 °C
Non-repetitive Pulse Waveform
Shown in Pulse Waveform Graph
100
75
50
25
0
05025 75 100 150125 175 200
Ambient Temperature (
Peak Pulse Derating in Percent of
Peak Power or Current
°C)
10 x 1000 Waveform as Defined
by R.E.A.
5.0
3.0
4.0
2.0
1.0
0.0
05025 75 100 150125 175 200
TL, Lead Temperature (°C)
RM(AV) Steady State Power Dissipation (W)
60 Hz Resistive or
Inductive Load
100
50
0
0 1.0 2.0 3.0 4.0
T, Time (ms)
IP, Peak Pulse Current (%)
TA=25 °C
TP
TR=10 µs
Half value= IRSM
2
Peak value (IRSM)
Pulse width (TP)
is defined as that point
where the peak current
decays to 50 % of IPSM.
10 x 1000 waveform
as defined by R.E.A.
Peak Forward Surge Current (Amps)
100
200
10
12510 20 50 100
Number of Cycles at 60 Hz
Pulse Width 8.3 ms
Single Half Sine-Wave
(JEDEC Method)
100
1.0
10
0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms
TP, Pulse Width
PP, Peak Power (KW)
td - Pulse Width (Seconds)
Copper Pad Areas
1
10
100
10 ms0.1 µs 1 µs 10 µs 100 µs 1 ms
0.31 x 031 ” (8.0 x 8.0 mm)
Non-repetitive pulse
waveform
TA = 25 °C
Copper Pad Areas
P
PPM
- Peak Pulse Power (kW)
1
10
100
1000
10000
100000
1 10 100 1000
Unidirectional @ VR
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
CJ
-
Junction Capacitance (pF)
Bidirectional V = 0 V
Unidirectional V = 0 V
Bidirectional @ VR
VBR - Reverse Breakdown Voltage (V)
0
20
40
60
80
100
120
140
160
180
200
001011
Number of Cycles at 60 Hz
I
FSM
- Peak Forward Surge Current (A)
100
1.0
10
0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms
TP, Pulse Width
PP, Peak Power (KW)
TA = 25 °C
Non-repetitive Pulse Waveform
Shown in Pulse Waveform Graph
100
75
50
25
0
05025 75 100 150125 175 200
Ambient Temperature (
Peak Pulse Derating in Percent of
Peak Power or Current
°C)
10 x 1000 Waveform as Defined
by R.E.A.
5.0
3.0
4.0
2.0
1.0
0.0
05025 75 100 150125 175 200
TL, Lead Temperature (°C)
RM(AV) Steady State Power Dissipation (W)
60 Hz Resistive or
Inductive Load
100
50
0
0 1.0 2.0 3.0 4.0
T, Time (ms)
IP, Peak Pulse Current (%)
TA=25 °C
TP
TR=10 µs
Half value= IRSM
2
Peak value (IRSM)
Pulse width (TP)
is defined as that point
where the peak current
decays to 50 % of IPSM.
10 x 1000 waveform
as defined by R.E.A.
Peak Forward Surge Current (Amps)
100
200
10
12510 20 50 100
Number of Cycles at 60 Hz
Pulse Width 8.3 ms
Single Half Sine-Wave
(JEDEC Method)
100
1.0
10
0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms
TP, Pulse Width
PP, Peak Power (KW)
td - Pulse Width (Seconds)
Copper Pad Areas
1
10
100
10 ms0.1 µs 1 µs 10 µs 100 µs 1 ms
0.31 x 031 ” (8.0 x 8.0 mm)
Non-repetitive pulse
waveform
TA = 25 °C
Copper Pad Areas
P
PPM
- Peak Pulse Power (kW)
1
10
100
1000
10000
100000
1 10 100 1000
Unidirectional @ VR
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
C
J
-
Junction Capacitance (pF)
Bidirectional V = 0 V
Unidirectional V = 0 V
Bidirectional @ VR
VBR - Reverse Breakdown Voltage (V)
0
20
40
60
80
100
120
140
160
180
200
001011
Number of Cycles at 60 Hz
I
FSM
- Peak Forward Surge Current (A)
100
1.0
10
0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms
TP, Pulse Width
PP, Peak Power (KW)
TA = 25 °C
Non-repetitive Pulse Waveform
Shown in Pulse Waveform Graph
100
75
50
25
0
05025 75 100 150125 175 200
Ambient Temperature (
Peak Pulse Derating in Percent of
Peak Power or Current
°C)
10 x 1000 Waveform as Defined
by R.E.A.
5.0
3.0
4.0
2.0
1.0
0.0
05025 75 100 150125 175 200
TL, Lead Temperature (°C)
RM(AV) Steady State Power Dissipation (W)
60 Hz Resistive or
Inductive Load
100
50
0
0 1.0 2.0 3.0 4.0
T, Time (ms)
IP, Peak Pulse Current (%)
TA=25 °C
TP
TR=10 µs
Half value= IRSM
2
Peak value (IRSM)
Pulse width (TP)
is defined as that point
where the peak current
decays to 50 % of IPSM.
10 x 1000 waveform
as defined by R.E.A.
Peak Forward Surge Current (Amps)
100
200
10
12510 20 50 100
Number of Cycles at 60 Hz
Pulse Width 8.3 ms
Single Half Sine-Wave
(JEDEC Method)
100
1.0
10
0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms
TP, Pulse Width
PP, Peak Power (KW)
td - Pulse Width (Seconds)
Copper Pad Areas
1
10
100
10 ms0.1 µs 1 µs 10 µs 100 µs 1 ms
0.31 x 031 ” (8.0 x 8.0 mm)
Non-repetitive pulse
waveform
TA = 25 °C
Copper Pad Areas
P
PPM
- Peak Pulse Power (kW)
1
10
100
1000
10000
100000
1 10 100 1000
Unidirectional @ VR
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
CJ
-
Junction Capacitance (pF)
Bidirectional V = 0 V
Unidirectional V = 0 V
Bidirectional @ VR
VBR - Reverse Breakdown Voltage (V)
0
20
40
60
80
100
120
140
160
180
200
001011
Number of Cycles at 60 Hz
I
FSM
- Peak Forward Surge Current (A)
100
1.0
10
0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms
TP, Pulse Width
PP, Peak Power (KW)
TA = 25 °C
Non-repetitive Pulse Waveform
Shown in Pulse Waveform Graph
100
75
50
25
0
05025 75 100 150125 175 200
Ambient Temperature (
Peak Pulse Derating in Percent of
Peak Power or Current
°C)
10 x 1000 Waveform as Defined
by R.E.A.
5.0
3.0
4.0
2.0
1.0
0.0
050
25 75 100 150125 175 200
TL, Lead Temperature (°C)
RM(AV) Steady State Power Dissipation (W)
60 Hz Resistive or
Inductive Load
100
50
0
0 1.0 2.0 3.0 4.0
T, Time (ms)
IP, Peak Pulse Current (%)
TA=25 °C
TP
TR=10 µs
Half value= IRSM
2
Peak value (IRSM)
Pulse width (TP)
is defined as that point
where the peak current
decays to 50 % of IPSM.
10 x 1000 waveform
as defined by R.E.A.
Peak Forward Surge Current (Amps)
100
200
10
12510 20 50 100
Number of Cycles at 60 Hz
Pulse Width 8.3 ms
Single Half Sine-Wave
(JEDEC Method)
100
1.0
10
0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms
TP, Pulse Width
PP, Peak Power (KW)
td - Pulse Width (Seconds)
Copper Pad Areas
1
10
100
10 ms0.1 µs 1 µs 10 µs 100 µs 1 ms
0.31 x 031 ” (8.0 x 8.0 mm)
Non-repetitive pulse
waveform
TA = 25 °C
Copper Pad Areas
P
PPM
- Peak Pulse Power (kW)
1
10
100
1000
10000
100000
1 10 100 1000
Unidirectional @ VR
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
CJ
-
Junction Capacitance (pF)
Bidirectional V = 0 V
Unidirectional V = 0 V
Bidirectional @ VR
VBR - Reverse Breakdown Voltage (V)
0
20
40
60
80
100
120
140
160
180
200
001011
Number of Cycles at 60 Hz
I
FSM
- Peak Forward Surge Current (A)
100
1.0
10
0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms
TP, Pulse Width
PP, Peak Power (KW)
TA = 25 °C
Non-repetitive Pulse Waveform
Shown in Pulse Waveform Graph
3312 - 2 mm SMD Trimming Potentiometer
Product Dimensions
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
1.5SMC Transient Voltage Suppressor Diode Series
Recommended Footprint
Physical Specications
Case ...........................................Molded plastic per UL Class 94V-0
Polarity....................... Cathode band indicates unidirectional device
No cathode band indicates bidirectional device
DIMENSIONS: MM
(INCHES)
Dimension SMC (DO-214AB)
A6.60 - 7.11
(0.260 - 0.280)
B5.59 - 6.22
(0.220 - 0.245)
C2.90 - 3.20
(0.115 - 0.125)
D7.75 - 8.13
(0.305 - 0.320)
E 0.05 - 0.202
(0.002 - 0.008)
F 2.00 - 2.62
(0.079 - 0.103)
G 0.76 - 1.52
(0.030 - 0.060)
DIMENSIONS: MM
(INCHES)
Dimension SMC (DO-214AB)
a (Max.) 4.69
(0.185)
b (Min.) 3.07
(0.121)
c (Min.) 1.52
(0.060)
a
c
B
CATHODE BAND
(FOR UNIDIRECTIONAL
PRODUCTS ONLY)
F
E
C
b
MM
(INCHES)
DIMENSIONS:
G
D
Aa
c
B
CATHODE BAND
(FOR UNIDIRECTIONAL
PRODUCTS ONLY)
F
E
C
b
MM
(INCHES)
DIMENSIONS:
G
D
A
CDDFN5-0504N - TVS/Steering Diode Array
Packaging Information
.......
.......
....... ..............
....... ..............
PA
F
ET
120 °
D2
DD
1
W1
C
Index Hole
P
0
P
1
W
B
10 pitches (min.)
Direction of Feed
10 pitches (min.)
End
Trailer Device Leader
Start
d
The product will be dispensed in tape and reel format (see diagram below).
Devices are packed in accordance with EIA standard
RS-481-A and specications shown here.
DIMENSIONS: MM
(INCHES)
REV. 06/16
1.5SMC Transient Voltage Suppressor Diode Series
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Item Symbol SMC (DO-214AB)
7 Inch Reel 13 Inch Reel
Carrier Width A 6.0 ± 2.0
(0.236 - 0.079)
Carrier Length B 8.3 ± 0.20
(0.327 ± 0.008)
Carrier Depth C 2.5 ± 0.20
(0.098 ± 0.008)
Sprocket Hole d 1.50 ± 0.10
(0.059 ± 0.004)
Reel Outside Diameter D 178
(7.008)
330
(12.992)
Reel Inner Diameter D1 50.0
(1.969) MIN.
Feed Hole Diameter D2 13.0 +0.50/-0.20
(0.512 +0.020/-0.008)
Sprocket Hole Position E 1.75 ± 0.10
(0.069 ± 0.004)
Punch Hole Position F 7.50 ± 0.10
(0.295 ± 0.004)
Punch Hole Pitch P 8.00 ± 0.10
(0.315 ± 0.004)
Sprocket Hole Pitch P0 4.00 ± 0.10
(0.157 ± 0.004)
Embossment Center P1 2.00 ± 0.10
(0.079 ± 0.004)
Overall Tape Thickness T0.30 ± 0.10
(0.012 ± 0.004)
Tape Width W 16.00 ± 0.30
(0.630 ± 0.012)
Reel Width W122.4
(0.882) MAX.
Quantity per Reel -- 500 3,000
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Bourns:
1.5SMC30A 1.5SMC160CA 1.5SMC100CA 1.5SMC180CA 1.5SMC10CA 1.5SMC220CA 1.5SMC120CA
1.5SMC550A 1.5SMC47A 1.5SMC150A 1.5SMC12A 1.5SMC75A 1.5SMC91A 1.5SMC51A 1.5SMC39CA
1.5SMC250A 1.5SMC8.2CA 1.5SMC56CA 1.5SMC62CA 1.5SMC550CA 1.5SMC6.8CA 1.5SMC10A
1.5SMC110CA 1.5SMC510A 1.5SMC11CA 1.5SMC300CA 1.5SMC11A 1.5SMC30CA 1.5SMC220A 1.5SMC480A
1.5SMC9.1CA 1.5SMC110A 1.5SMC170A 1.5SMC33CA 1.5SMC15A 1.5SMC16A 1.5SMC350CA 1.5SMC22CA
1.5SMC75CA 1.5SMC51CA 1.5SMC480CA 1.5SMC530A 1.5SMC200CA 1.5SMC200A 1.5SMC24A 1.5SMC20A
1.5SMC22A 1.5SMC15CA 1.5SMC6.8A 1.5SMC39A 1.5SMC120A 1.5SMC130CA 1.5SMC160A 1.5SMC47CA
1.5SMC350A 1.5SMC62A 1.5SMC13CA 1.5SMC400CA 1.5SMC43A 1.5SMC540CA 1.5SMC82A 1.5SMC18CA
1.5SMC68A 1.5SMC24CA 1.5SMC300A 1.5SMC56A 1.5SMC36A 1.5SMC82CA 1.5SMC180A 1.5SMC9.1A
1.5SMC7.5CA 1.5SMC130A 1.5SMC530CA 1.5SMC33A 1.5SMC170CA 1.5SMC100A 1.5SMC510CA 1.5SMC18A
1.5SMC27CA 1.5SMC43CA 1.5SMC250CA 1.5SMC16CA 1.5SMC440CA 1.5SMC540A 1.5SMC400A
1.5SMC27A 1.5SMC8.2A 1.5SMC13A 1.5SMC12CA 1.5SMC91CA 1.5SMC68CA 1.5SMC36CA 1.5SMC20CA
1.5SMC150CA 1.5SMC7.5A 1.5SMC440A