US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
AEC
Q200 125°C
+
Halogen
Free
& buy
& FAQ
softw
Shielded Power Inductors
–
XAL60xx
Document 887-1
Document 887-1 Revised 11/02/18
Inductance2
DCR (mOhms)3 SRF typ4 Isat5 Irms (A)6
Part number1 ±20% (µH) typ max (MHz) (A) 20°C rise 40°C rise
XAL6030-181ME_ 0.18 1.59 1.75 141 39.0 24 32
XAL6030-331ME_ 0.33 2.30 2.53 89 30.0 20 25
XAL6030-561ME_ 0.56 3.01 3.31 61 29.0 17 22
XAL6030-102ME_ 1.0 5.62 6.18 50 23.0 13 18
XAL6030-122ME_ 1.2 6.82 7.50 43 22.0 12 16
XAL6030-182ME_ 1.8 9.57 10.52 34 18.2 10 14
XAL6030-222ME_ 2.2 12.70 13.97 30 15.9 7.0 10
XAL6030-332ME_ 3.3 19.92 20.81 26 12.2 6.0 8.0
XAL6060-472ME_ 4.7 13.10 14.40 21 10.5 8.0 11
XAL6060-562ME_ 5.6 14.46 15.90 20 9.9 7.5 10
XAL6060-682ME_ 6.8 18.90 20.80 18 9.2 7.0 9.0
XAL6060-822ME_ 8.2 24.00 26.40 16 8.4 6.0 8.0
XAL6060-103ME_ 10 27.00 29.82 14 7.6 5.0 7.0
XAL6060-153ME_ 15 39.77 43.75 11 5.8 4.5 6.0
XAL6060-223ME_ 22 55.12 60.63 9.0 5.6 3.6 5.0
XAL6060-333ME_ 33 95.68 105.0 7.0 3.7 2.7 3.6
1. When ordering, please specify termination and packaging codes:
XAL6060-333MEC
Termination: E = RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape.
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked.
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Designer’s Kit C442 contains 3 each of all values.
Core material Composite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper.
Other terminations available at additional cost.
Operating voltage: 0 – 55 V
Weight XAL6030: 0.60 – 0.70 g; XAL6060: 1.0 – 1.6 g
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
• High current; very low DCR
• Soft saturation
• AEC-200 Grade 1 qualified (–40°C to +125°C ambient)
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other com-
ponents. Therefore temperature
rise should be verified in appli-
cation conditions.