FXR CONNECTOR Emboss Tape 0.3mm pitch/Connectors for FPC 0.3mm Specifications ------------------- * Current rating: 0.2A AC, DC * Voltage rating: 50V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 50m max. After environmental testing/ 50m max. (variation from initial value) * Insulation resistance: 50M min. * Withstanding voltage: 200V AC/minute * Applicable FPC: Conductor pitch/ 0.3mm Conductor width/ 0.3mm Mating part thickness/ 0.20.03mm * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. This FXR connector is a ZIF type connector for FPC with only 1.0mm height. * Low profile and ZIF mechanism * Space saving design * Heat resisting design suitable for surface mounting Standards ---------------------- 0 Recognized E60389 0.05 0.3 0.05 0.975 0.05 0.1 0.67 0.05 0.47 0.35 0.05 0.6 0.05 D 0.05 Note: 1. The above figure is the figure viewed from the connector mounting side. 2. Tolerances are non-cumulative: 0.05mm for all centers. 3. The dimensions above should serve as a guideline. Contact JST for details. 1 3.5 0.3 1 0.2 0.3 3.45 0.1 0.3 0.1 0.6 0.05 0.1 1 0.1 0.6 3.65 0.1 0.5 0.05 A 0.05 0.3 0.05 FXR CONNECTOR Connector Model No. 11 11FXR-RSM1-GAN-TB 13FXR-RSM1-GAN-TB 15FXR-RSM1-GAN-TB 17FXR-RSM1-GAN-TB 19FXR-RSM1-GAN-TB 21FXR-RSM1-GAN-TB 23FXR-RSM1-GAN-TB 25FXR-RSM1-GAN-TB 27FXR-RSM1-GAN-TB 29FXR-RSM1-GAN-TB 31FXR-RSM1-GAN-TB 33FXR-RSM1-GAN-TB 35FXR-RSM1-GAN-TB 37FXR-RSM1-GAN-TB 39FXR-RSM1-GAN-TB 45FXR-RSM1-GAN-TB 47FXR-RSM1-GAN-TB 51FXR-RSM1-GAN-TB 61FXR-RSM1-GAN-TB 13 15 C 17 A 19 0.6 21 23 25 27 29 31 33 35 37 B 3.5 39 0.3 45 1 47 51 61 0.3 Dimensions (mm) A B C D Circuits Q'ty / reel 2.4 3.6 5.4 3.0 5,000 3.0 4.2 6.0 3.6 5,000 3.6 4.8 6.6 4.2 5,000 4.2 5.4 7.2 4.8 5,000 4.8 6.0 7.8 5.4 5,000 5.4 6.6 8.4 6.0 5,000 6.0 7.2 9.0 6.6 5,000 6.6 7.8 9.6 7.2 5,000 7.2 8.4 10.2 7.8 5,000 7.8 9.0 10.8 8.4 5,000 8.4 9.6 11.4 9.0 5,000 9.0 10.2 12.0 9.6 5,000 9.6 10.8 12.6 10.2 5,000 10.2 11.4 13.2 10.8 5,000 10.8 12.0 13.8 11.4 5,000 12.6 13.8 15.6 13.2 5,000 13.2 14.4 16.2 13.8 5,000 14.4 15.6 17.4 15.0 5,000 17.4 18.6 20.4 18.0 5,000 Material and Finish 0.6 D Contact: Copper alloy, nickel-undercoated, gold-plated (nickel-stripe) Cover: PPS, UL94V-0 Housing: LCP, UL94V-0 Solder tab: Copper alloy, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN)(S)(1) on a label. Note: Contact JST for tin-plated products. Lead section dimensions of FPC 0.3N+10.05 0.3N-10.03 0.3 0.07 0.6 0.02 0.3 0.04 0.03 0.3 0.04 0.03 0.1 Between conductors 0.05 0.2 0.03 3 MIN 2R 2.7 MIN 1.15 0.15 1.25 0.15 2 0.15 2.10.15 2.20.15 .2 R0 2- 2.5 MIN 0.1 plated solder 0.3 0.15 0.3 0. 2 0.3 0.30.07 0.1max. Reinforcing layer 0.2 Conductor width 0.2 0.6 0.02 0.6 0.03 0.3N-3 0.6 0.07 Note: N --- Number of circuits 2