PSSP-500-13.5 - Wall Industries, Inc.

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833

603-778-2300 www.wallindustries.com Fax 603-778-9797

PSSP500 Series

Single Output

Up to 486 Watts

Built-In Active PFC Function

AC/DC Switching Power Suppl

FEATURES

● 3 Year Warranty

● Fixed Switching Frequency

● 100% Full Load Burn-In Tested

● Universal AC Input / Full Range

● Built-In Remote Sense Function

● Built-In Remote ON/OFF Control

● Built-In Cooling Fan ON/OFF Control

● Forced Air Cooling by Built-In DC Fan

● Built-In Active PFC Function, PF > 0.95

● Short Circuit, Overload, Over Voltage, and Over Temperature Protected

SPECIFICATIONS: PSSP500 Series

All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.

We reserve the right to change specifications based on technological advances.

INPUT SPECIFICATIONS

Input Voltage Range (See Note 5) 88 ~ 264VAC (124 ~ 370VDC)

Input Frequency 47 to 63Hz

AC Current (typical) 7A @ 115VAC 3.5A @ 230VAC

Inrush Current (typical) 18A @ 115VAC 36A @ 230VAC

Leakage Current < 3.5mA @ 240VAC

Power Factor (typical) PF > 0.95 @ 230VAC PF > 0.95 @ 115VAC and full load

Remote ON/OFF Control RC+/RC-: Short = power on; Open = power off

OUTPUT SPECIFICATIONS

Output Voltage See Table

Output Power See Table

Voltage Tolerance (See Note 3) 1.0%

Voltage Adjustment Range See Table

Line Regulation 0.5%

Load Regulation 0.5%

Output Current See Table

Ripple & Noise (max) (See Note 2) 12V - 15V outputs: 240mVp-p; 27V output: 200mVp-p; 48V output: 300mVp-p

Setup, Rise Time 1500ms, 50ms @ full load

Hold Up Time (typical) 24ms @ full load

Temperature Coefficient ±0.03%/°C (0 ~ 50°C)

PROTECTION

Overload Protection 105 ~ 135% rated output power

Protection Type: Foldback current limiting; recovers automatically after fault condition is removed

Over Voltage Protection See Table

Protection Type: Hiccup mode; recovers automatically after fault condition is removed

Fan Control, Over Temperature Protection RTH1 or RTH2 ≥ 50°C FAN ON, ≤ 45°C FAN OFF, ≥ 70°C output shutdown

GENERAL SPECIFICATIONS

Switching Frequency 110KHz

Efficiency (typical) See Table

Withstand Voltage 3000VAC (Input to Output), 1500VAC (Input to FG), 500VAC (Output to FG)

Isolation Resistance 100MΩ/500DC (Input to Output, Input to FG, and Output to FG)

ENVIRONMENTAL SPECIFICATIONS

Working Temperature -10°C to +50°C (refer to output load derating curve)

Storage Temperature -20°C to +85°C

Working Humidity 20 ~ 90% RH non-condensing

Storage Humidity 10 ~ 95% RH

Vibration 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min each along X, Y, Z axes.

Cooling Forced air cooling by built-in DC fan

MTBF 133,400 hours min. @ 25°C (MIL-HDBK-217F)

PHYSICAL SPECIFICATIONS

Weight 1900 grams

Dimensions 170(L) x 120(W) x 93(H) mm

Warranty 3 years

SAFETY & EMC

Safety Standards UL60950-1, TUV EN60950-1 approved

EMI Conduction & Radiation Compliance to EN55022 (CISPR22) Class B

Harmonic Current Compliance to EN61000-3-2,-3

EMS Immunity Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, light industry level, criteria A

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833

603-778-2300 www.wallindustries.com Fax 603-778-9797

PSSP500 Series

Single Output

Up to 486 Watts

Built-In Active PFC Function

AC/DC Switching Power Suppl

OUTPUT VOLTAGE / CURRENT RATING CHART

Model Number Input Voltage Output

Voltage

Adjust. Range

Over Voltage

Protection

Output

Current Output Power Efficiency

PSSP-500-12 12 VDC 10 ~ 13.2V 13.8 ~ 16.2V 40A 480W 84%

PSSP-500-13.5 13.5 VDC 12 ~ 15V 15.5 ~ 18.2V 36A 486W 84%

PSSP-500-15 15 VDC 13.5 ~ 18V 18 ~ 21V 32A 480W 83%

PSSP-500-24 24 VDC 20 ~ 26.4V 27.6 ~ 32.4V 20A 480W 85.5%

PSSP-500-27 27VDC 24 ~ 30V 31 ~ 36.5V 18A 486W 86.5%

PSSP-500-48

88 ~ 264 VAC

(124 ~ 370 VDC)

48 VDC 41 ~ 56V 57.6 ~ 67.2V 10A 480W 87%

NOTES

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C ambient temperature.

2. Ripple & noise are measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.

3. Tolerances include set up tolerance, line regulation, and load regulation.

4. The power supply is considered a component, which will be installed into final equipment. The final equipment must be re-confirmed

that it still meets EMC directives.

5. Derating may be needed under low input voltages. Please check the derating curve for more details.

BLOCK DIAGRAM

DERATING CURVE OUTPUT DERATING VS INPUT VOLTAGE

fosc: 100KHz

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833

603-778-2300 www.wallindustries.com Fax 603-778-9797

PSSP500 Series

Single Output

Up to 486 Watts

Built-In Active PFC Function

AC/DC Switching Power Suppl

MECHANICAL DRAWING

Terminal Pin No. Assignment

Pin No. Assignment Pin No. Assignment

1 AC/L 7 R.C.

2 AC/N 8 +S

3 FG 9 ~ 11 DC OUTPUT +V

4,5 NC 12 ~ 14 DC OUTPUT –V

6 R.C.G. 15 -S

Unit: mm