DS27001 Rev. 8 - 2 1 of 3 PR1001G/L - PR1007G/L
www.diodes.com Diodes Incorporated
PR1001G/L - PR1007G/L
1.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER
Features
“GL” Suffix Designates A-405 Package
“G” Suffix Designates DO-41 Package
Dim DO-41 Plastic A-405
Min Max Min Max
A25.40 25.40
B4.06 5.21 4.10 5.20
C0.71 0.864 0.53 0.64
D2.00 2.72 2.00 2.70
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified
•Glass Passivated Die Construction
•Fast Switching for High Efficiency
•Surge Overload Rating to 30A Peak
•Low Reverse Leakage Current
•Lead Free Finish, RoHS Compliant (Note 4)
Mechanical Data
•Case: DO-41 Plastic, A-405
•Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
•Moisture Sensitivity: Level 1 per J-STD-020C
•Terminals: Finish - Tin. Plated Leads Solderable per
MIL-STD-202, Method 208
•Polarity: Cathode Band
•Marking: Type Number
•Ordering Information: See Last Page
•DO-41 Weight: 0.35 grams (approximate)
•A-405 Weight: 0.20 grams (approximate)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol PR1001
G/GL PR1002
G/GL PR1003
G/GL PR1004
G/GL PR1005
G/GL PR1006
G/GL PR1007
G/GL Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 5)
VRRM
VRWM
VR50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current
(Note 1) @ TA = 55°CIO1.0 A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load IFSM 30 A
Forward Voltage Drop @ IF = 1.0A VFM 1.3 V
Peak Reverse Current @ TA = 25°C
at Rated DC Blocking Voltage (Note 5) @ TA = 100°CIRM 5.0
50 µA
Reverse Recovery Time (Note 3) trr 150 250 500 ns
Typical Total Capacitance (Note 2) CT15 8 pF
Typical Thermal Resistance Junction to Ambient RθJA 95 °C/W
Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C
Notes: 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5.
4. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.
5. Short duration pulse test used to minimize self-heating effect.