109-311-04 - Marl International Limited

pcb led indicators

features

specifications

to order

Ordering information and typical characteristics (Ta = 25°C)

BS EN ISO 9001:2008

approved manufacturer

109 series

• Ø3.0mm LED

• Saves board space and assembly time

• Material conforms to UL94 V-O flammability ratings

• Colour diffused lens

• Reverse polarity and low current options available

• Custom built multi-colour permutations available

• Typically available ex stock

• Pack Quantity = 250 Pieces

Part

Number Colour Voltage

Vac/dc

Current

(mA)

Luminous

Intensity

(mcd)

Wave

Length

(nm)

Operating

Temp.

(°C)

Storage

Temp.

(°C)

De-rating

Graphs

109-305-04 Red 2.0 Vdc 20 20 627 -40 - +85 -40 - +85 A

109-311-04 Yellow 2.1 Vdc 20 30 590 -40 - +85 -40 - +85 A2

109-314-04 Green 2.2 Vdc 20 28 565 -40 - +85 -40 - +85 F

109-330-04 Red/Green 2.0/2.2 Vdc 20 20/20 627/565 -40 - +85 -40 - +85 E

109-381-20 Red 5/6 Vdc 13 20@13mA 627 -40 - +70 -40 - +85 -

109-382-20 Yellow 5/6 Vdc 13 15@13mA 590 -40 - +70 -40 - +85 -

109-383-20 Green 5/6 Vdc 11.5 20@13mA 565 -40 - +70 -40 - +85 -

^ = Voltage for 20mA product is Vf at 20mA, not Vopr

- Products must be de-rated according to the de-rating information. Each de-rating graph refers to

specific LEDs. Please refer to graphs on page 3.

- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.

to order please contact us on: t: +44 (0)1229 582 430

f: +44 (0)1229 585 155 e: sales@marl.co.uk w: www.leds.co.uk

intention of providing information, which must not be copied or released to a third party without prior

written consent from marl international limited. the information provided does not constitute part of any

order or contract and should not be regarded as a representation relating to either products or service. no

responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right

to alter without notice the specification or any conditions of supply for product or service.

marl international limited - dsn 109 - version 2013-09-24-173131 page 1 of 5

technical data

to order

de-rating information

Dimensions in mm (typical)

Not to scale

housing material

Polycarbonate

This material offers UL94 V-O flame retardancy* and a high impact strength. This material has a melting point of 290-340°c

and is suitable for use in the majority of automatic soldering processes

*Material test thickness of 1.6mm

BS EN ISO 9001:2008

approved manufacturer

109 series

10.6

3.1

2.60 8

5 2.54

0.5 Sq

0.0 100.080.060.040.020.0

Ambient Temperature Ta (°C)

Forward Current IF (mA)

Derating Graph A

0.0 100.080.060.040.020.0

Ambient Temperature Ta (°C)

Forward Current IF (mA)

Derating Graph A2

0.0 100.080.060.040.020.0

Ambient Temperature Ta (°C)

Forward Current IF (mA)

Derating Graph E

to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155

e: sales@marl.co.uk w: www.leds.co.uk

providing information, which must not be copied or released to a third party without prior written consent from marl

international limited. the information provided does not constitute part of any order or contract and should not be regarded as a

representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl

international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.

marl international limited - dsn 109 - version 2013-09-24-173131 page 2 of 5

de-rating information continued

to order

BS EN ISO 9001:2008

approved manufacturer

109 series

0.0 100.080.060.040.020.0

Ambient Temperature Ta (°C)

Forward Current IF (mA)

Derating Graph F

to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155

e: sales@marl.co.uk w: www.leds.co.uk

providing information, which must not be copied or released to a third party without prior written consent from marl

international limited. the information provided does not constitute part of any order or contract and should not be regarded as a

representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl

international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.

marl international limited - dsn 109 - version 2013-09-24-173131 page 3 of 5

to order

also available

The products listed above illustrate all of the options available to order. These products may have custom modifications that

alter their operation beyond the generic information contained within this datasheet. Please contact sales for further

information.

BS EN ISO 9001:2008

approved manufacturer

109 series

Part numbers also available in the 109 series:

Part

Number Colour Voltage

Vopr

109-000-01-50 Red/Green 2 mA dc

109-000-01-51 Green/Red 2 mA dc

109-000-01-53 Red/Yellow 2 mA dc

109-000-01-54 Green/Yellow 2 mA dc

109-000-01-57 Red/Green 2 mA dc

109-000-02-50 Red/Green 10 mA dc

109-000-04-50 Red/Green 20 mA dc

109-000-04-51 Yellow/Red 20 mA dc

109-000-04-52 Green/Yellow 20 mA dc

109-000-04-52-6 Green/Yellow 20 mA dc

109-000-04-53 Yellow/Green 20 mA dc

109-000-04-54 Green/Red 20 mA dc

109-000-13-50 Yellow/Green 20 mA dc RP

109-000-13-51 - 20 mA dc RP

109-000-20-51 Green/Red 5/6 Vdc

109-000-20-52 Red/Green 5/6 Vdc

109-305-01 Red 2 mA dc

109-305-04-7 Red 20 mA dc

109-305-13-7 Red 20 mA dc RP

109-311-01 Yellow 2 mA dc

109-311-01-24 Yellow 2 mA dc

109-311-01-6 Yellow 2 mA dc

109-311-04-24 Yellow 20 mA dc

109-314-01 Green 2 mA dc

109-330-01 Red/Green 2 mA dc

109-330-04-24 Red/Green 20 mA dc

109-332-13 Green/Yellow 20 mA dc RP

109-383-20-24 Green 5/6 Vdc

109-383-20-26 Green 5/6 Vdc

109-383-20-6 Green 5/6 Vdc

to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155

e: sales@marl.co.uk w: www.leds.co.uk

providing information, which must not be copied or released to a third party without prior written consent from marl

international limited. the information provided does not constitute part of any order or contract and should not be regarded as a

representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl

international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.

marl international limited - dsn 109 - version 2013-09-24-173131 page 4 of 5

LED Polarity

Anode identification is shown in the dimensional diagram. The long lead of a non cropped unit can also be used to help identify

the anode. For the 2 pin bi-colour units the standard colour configuration is red anode to the ‘+’ sign.

Reverse Polarity

This is offered on all PCB units, with the exception of the 125 series, if requested to help overcome the problem of systems

with reverse polarity connections. Multiple units can also be supplied in reverse polarity but not with mixed polarities. The 2 pin

and 3 pin bi-colours can be supplied in reverse colour configuration.

Lead Cropping

Should lead cropping be required, Marl offer two standard lengths, either by request or by adding one of t he following codes to

the end of the part number:-

-24 = 3mm.

-26 = 5mm (e.g 101-205-02-26)

Other non standard lead lengths are available on request.

Bi-Colour

2 pin operation. To achieve the second colour for a 2 pin bi-colour unit, the supply must be reversed , standard colour

configuration for these units is red anode to the ‘+’ sign.

Electro-Static Discharge (ESD)

Build up of electro-static discharge occurs in many situations involving people moving and handling products. The range of

possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual

situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood

that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and

assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing

technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have

changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and

despatch. Marl recommend all users of LED based products follow the guidelines of BS 100015.

Power De-Rating

The forward voltage/ current value of an LED is dependant upon the ambient temperature of the environment in which it is

operated. Therefore, care must be taken to operate the LED at the correct voltage/ current values, depending upon the

ambient temperature. Consequently, a recommendation regarding operating voltages and currents is given in order to address

these temperature effects. This recommendation is termed ‘de-rating’. It is usual for forward voltages and currents to be

specified for ambient temperature of 25°C. However, because the values of these qualities vary with temperature, marl should

be contacted if the device is to be operated at a temperature significantly higher than 25°C. Marl accept no liability for any

product that is operated higher than the stated voltage.

to order

design considerations

BS EN ISO 9001:2008

approved manufacturer

109 series

to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155

e: sales@marl.co.uk w: www.leds.co.uk

providing information, which must not be copied or released to a third party without prior written consent from marl

international limited. the information provided does not constitute part of any order or contract and should not be regarded as a

representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl

international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.

marl international limited - dsn 109 - version 2013-09-24-173131 page 5 of 5