FDH333 - Fairchild Semiconductor

FDH/FDLL 300/A / 333

High Conductance Low Leakage Diode

Sourced from Process 1M. See MMBD1501/A-1505/A for characteristics.

Absolute Maximum Ratings* TA = 25°C unless otherwise noted

*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.

NOTES:

1) These ratings are based on a maximum junction temperature of 200 degrees C.

2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.

Thermal Characteristics TA = 25°C unless otherwise noted

Symbol Parameter Value Units

WIV Workin g Inverse Voltage 125 V

IOAverage Rectified Current 200 mA

IFDC Forwa rd Current 500 mA

ifRecurrent Peak Forward Current 600 mA

if(surge) Peak Forward Surge Curren t

Pulse width = 1.0 second

Pulse width = 1.0 microsecond 1.0

4.0 A

Tstg Storage Temperature Range -65 to +200 °C

TJOperating Junction Temperature 175 °C

Symbol Characteristic Max Units

FDH/FDLL 300/A / 333

PDTotal D evice Dissipation

Derate above 25°C500

3.33 mW

mW/°C

RθJA Thermal Resistance, Junction to Ambient 300 °C/W

COLOR BAND MARKING

DEVICE 1ST BAND 2ND BAND

FDLL300 BROWN GREEN

FDLL300A BROWN YELLOW

FDLL333 BROWN BLUE

LL-34

THE PLACEMENT OF THE EXPANSION GAP

HAS NO RELATIONSHIP TO THE LOCATION

OF THE CATHODE TERMINAL

DO-35

FDH300/A / FDLL300/A / FDH333 / FDLL333

ã1997 Fairchild Semiconductor Corporation

Electrical Characteristics TA = 25°C unless otherwise noted

Symbol Parameter Test Conditions Min Max Units

BVBreakdown Voltage IR = 100

A150 V

IRReverse Current FDH/FDLL 300/A

FDH/FDLL 33 3

VR = 125 V

VR = 125 V, TA = 150°C

VR = 125 V

VR = 125 V, TA = 100°C

1.0

3.0

500

VFForward Vol tage FD H/FDLL 300/A

FDH/FDLL 30 0

FDH/FDLL 300A

FDH/FDLL 300/A

FDH/FDLL 30 0

FDH/FDLL 300A

FDH/FDLL 300/A

FDH/FDLL 33 3

IF = 1.0 mA

IF = 5.0 mA

IF = 10 mA

IF = 50 mA

IF = 100 mA

IF = 200 mA

IF = 50 mA

IF = 100 mA

IF = 150 mA

IF = 200 mA

IF = 250 mA

IF = 300 mA

800

830

860

0.87

0.88

0.9

680

750

760

800

880

890

920

1.0

890

940

970

1.05

1.08

1.15

CODiode Capacitance VR = 0, f = 1.0 MHz 6.0 pF

FDH300/A / FDLL300/A / FDH333 / FDLL333

High Conductance Low Leakage Diode

(continued)

DO-35 Tape and Reel Data

September 1999, Rev. A

DO-35 Packaging Information

T50R

TNR

10,000

254x79x794

30,000

0.137

2.23

Note/Comments

Packaging Option

Packaging type

Reel Size (inch diameter)

Qty per Reel/Tube/Bag

Int Box Dimension (mm)

Max qty per Box

Weight per unit (gm)

Weight per Reel/Ammo (kg)

Inside Tape Spacing (mm) 52

T50A

Ammo

5,000

406x267x184

50,000

0.137

0.800

Bulk

Standard

(no flow code)

Bag

500

279x133x108

5,000

0.137

DO-35 Packaging

Configuration: Figure 1.0

Soabar Label sample

P.O. No.

TYPE IN5225A MARK BLK-BRN

REV A2 PART No.

PKG EC No.

QTY 10,000 M.O. No. OX5046F035

Q.C. DATE D9903

MFD. UNDER US PAT 3.025. 589 & OTHER US PATS & APPLICATIONS

Kraft Paper Wound

Between Layers

Corrugated Outer Liner

Red/Blue (Cat hode)

White (Anode )

Soabar Label

DO-35 Packaging

Information Table: Figure 2.0

T50R

TNR Options

REEL DI MENSIONS

ITEM DESCRIPTION SYMBOL MINIMUM MAXIMUM

Ree l Di am e ter D1 10. 3 75 10. 62 5

Arb or Hol e Di am et er (S ta nd ard) D2 1. 24 5 1.2 55

Core Diameter D3 3.190 3.310

Flange to Flange Inner Width W1 3.400

Note: All Dimensions are in inches

DO-35 Reel Dimensions:

Figure 3.0

Soabar Label

DO-35 Tape and Ammo Data, continued

September 1999, Rev. A

TAPING DIMENSIONS

INCH MM MILS NOTES

A2.520 64.00 2519 Overall width

+0.066/ +1.69/ +66.5/

-0.027 -0.69 -27.0

B2.047±0.027 52 ±0.69 2047±27 Inside Tape Spacing

C0.200 ±0.0157 5.08 ±0.40 200 ±15.7 Component Pitch

D0.047(max) 1.2(max) 47(max) Component Misalignment

E0.022(max) 0.55(max) 22(max) Tape Mismatch

F0.027(max) ±0.69 ±27 Units in l i ne w/ one anot her

G0.126(min) 3.2(min) 126(mi n) Lead amount betw een t apes

H0 0 0 Lead amount beyond tapes

L1-L2 ±0.027 ±0.69 ±27 Delta between two leads

254mm x 79mm x 79mm

Intermediate Container (5,000 cap)

T50A Option

DO-35 A mmo Packing

Configuration: Figure 4.0

DO-35 Bulk Packing

Configuration: Figure 6.0

133mm x 95mm

Anti-static bag (500/bag)

Im 102mm x 76mm x 127mm

mediate Box (1,000 cap)

DO-35 Taping

Dimension: Figure 5.0

Soabar Label

(on top of box)

DO-35 (FS PKG Code D2)

DO-35 Package Dimensions

March 2000, Rev. A

1:1

Scale 1:1 on letter size paper

Dimensions shown below are in millimeters

Part Weight per unit (gram): 0.137

LL-34 Tape and Reel Data

January 2000, Rev . B

LL-34 Packaging

Configuration: Figure 1.0

Components Leader Tape

500mm min imum or

125 empty poc kets

Tr aile r Tape

300mm min imum or

75 empty poc kets

Cover Tape

Carrier Tape

Soabar Label

Soabar

Label

Soabar Label sample

P.O. No.

TYPE FD LL 41 48 MARK BLK-BRN

REV A2 P ART No.

PKG EC No.

QTY 2,500 M.O. No. OX5046F035

Q.C. DATE D9903

MFD. UNDER US PAT 3.025. 589 & OTHER US PATS & APPLICATIONS

Cathode

Note/Comments

Packaging Option

LL- 3 4 Packa gin g Informatio n

Standard

(no flow code)

Packaging type

Reel Size

TNR

7" Dia

Qty per Reel/Tube/Bag 2,500/1,000 (bulk)

Box Dimension (mm) 190x190x90

Max qty per Box 15,000

Weight per unit (gm) 0.030

Weight per Reel (kg) 0.150

Stat ic Dissipative Em bossed

Car ri er Tape

Soabar Label

Antistatic Cover Tape

LL-34 Tape Leader and Trailer

Configuration: Figure 2.0

Packaging Description:

LL- 34 pa rts ar e sh i ppe d in t ap e. T he c ar ri er ta pe i s ma de

from a dis sipative (carbon filled) polycarbonate resin. The

cover tape is a multilayer film (Heat Activated Adhesive in

nature) primarily composed of polyester film, adhesive

layer, se alan t, and an ti-static s prayed agent. These reeled

parts in standard option are shipped with 2,500 units per

7" or 178c m diameter reel . The reels are white in color and

is made of recyclable chipboard. Other option comes in

10,000 units per 13" or 330cm diameter reel. This and

some other options are described in the Packaging

Information table.

These full reels are individually labeled and placed inside

a bleach box (illustrated in figure 1.0) made of recyclable

corrugated paper. One bleach box contains six reels

maximum. These bleach boxes are placed inside a

labeled shipping box which comes in different sizes

depend ing o n the number of reels s hipped.

LL-34 Unit Orientation

LL-34 Tape and Reel Data,continued

January 2000, Rev . B

7" Diameter Option

Dim A

Max

See detail AA

W2 max Measured at Hub

W1 Measured at Hub

Dim N

Dim D

min

Dim C

B Min

DETAIL AA

LL-34 Carton Reel Configuration: Figure 4.0

Dimensions are in inches and millimeters

Tape Size Reel

Option Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL)

8mm 7" Dia 7.00

178 0.059

1.5 512 +0.020/-0. 008

13 +0.5/-0.2 0.795

20.2 2.165

55 0.331 +0.059/-0.000

8.4 +1.5/0 0.567

14.4 0.311 – 0.429

7.9 – 10.9

8m m 13" Dia 13.00

330 0.059

1.5 512 +0.020/-0. 008

13 +0.5/-0.2 0.795

20.2 4.00

100 0.331 +0.059/-0.000

8.4 +1.5/0 0.567

14.4 0.311 – 0.429

7.9 – 10.9

Dimensions are in millimeter

Pkg type

A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc

LL-34

(8mm)

1.7

+/-0.10 3.7

+/-0.10 8.0

+/-0.3 1.5

+/-0.10 1.1

+/-0.10 1.75

+/-0.10 6.25

min 3.50

+/-0.05 4.0

+/-0.1 4.05

+/-0.05 1.7

+/-0.10 0.3

+/-0.05 5.5

+/-0.2 0.10

max

Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481

rotational and lateral movement requirements (see sketches A, B, and C).

20 deg maximum component rotation

0.5mm

maximum

0.5mm

maximum

Sketch C (Top View)

Component lateral movement

Typical

component

cavity

center line

20 deg maximum

Typical

component

center line

Sketch B (Top View)

Component Rotation

Sketch A (Side or Front Sectional View)

Component Rotation

LL-34 Embossed Carrier Tape

Configuration: Figure 3.0

A0 D1

User Direction of Feed

LL-34 (FS PKG Code D3)

LL-34 Package Dimensions

March 2000, Rev. A

1:1

Scale 1:1 on letter size paper

Dimensions shown below are in millimeters

Part Weight per unit (gram): 0.030

TRADEMARKS

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is

not intended to be an exhaustive list of all such trademarks.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.

As used herein:

1. Life support devices or systems are devices or

systems which, (a) are intended for surgical implant into

the body, or (b) support or sustain life, or (c) whose

failure to perform when properly used in accordance

with instructions for use provided in the labeling, can be

reasonably expected to result in significant injury to the

user.

2. A critical component is any component of a life

support device or system whose failure to perform can

be reasonably expected to cause the failure of the life

support device or system, or to affect its safety or

effectiveness.

PRODUCT ST A TUS DEFINITIONS

Definition of Terms

Datasheet Identification Product Status Definition

Advance Information

Preliminary

No Identification Needed

Obsolete

This datasheet contains the design specifications for

product development. Specifications may change in

any manner without notice.

This datasheet contains preliminary data, and

supplementary data will be published at a later date.

Fairchild Semiconductor reserves the right to make

changes at any time without notice in order to improve

design.

This datasheet contains final specifications. Fairchild

Semiconductor reserves the right to make changes at

any time without notice in order to improve design.

This datasheet contains specifications on a product

that has been discontinued by Fairchild semiconductor.

The datasheet is printed for reference information only.

Formative or

In Design

First Production

Full Production

Not In Production

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER

NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD

DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICA TION OR USE OF ANY PRODUCT

OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT

RIGHTS, NOR THE RIGHTS OF OTHERS.

PowerTrench

QFET™

QS™

QT Optoelectronics™

Quiet Series™

SILENT SWITCHER

SMART ST ART™

SuperSOT™-3

SuperSOT™-6

SuperSOT™-8

FASTr™

GlobalOptoisolator™

GTO™

HiSeC™

ISOPLANAR™

MICROWIRE™

OPTOLOGIC™

OPTOPLANAR™

PACMAN™

POP™

Rev . G



ACEx™

Bottomless™

CoolFET™

CROSSVOLT™

DOME™

E2CMOSTM

EnSignaTM

FACT™

F ACT Quiet Series™

FAST

SyncFET™

TinyLogic™

UHC™

VCX™

