Dimensions: inch (mm)
MARKING without options:
- Line 1 : AP5xxx.xx
(Frequency)
- Line 2: 042104 (Six digit lot & blank date code, Ex: AP180.00, AP45.00)
Frequency Range
Operating Temperature
Storage Temperature
Overall Frequency Stability
Supply Voltage (Vdd)
Input Current
Symmetry @ 1/2Vdd
Rise and Fall Time (Tr/Tf)
Output Voltage
Start-up Time
Tri-State Function
Stand-by Current (option -B)
Jitter Peak-to-Peak
Phase Jitter RMS
Output Type
: PRELIMINARY
ABRACON IS
ABRACON IS
ISO 9001 / QS 9000
ISO 9001 / QS 9000
CERTIFIED
CERTIFIED
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
HCMOS/TTL COMPATIBLE SURFACE-MOUNT
HCMOS/TTL COMPATIBLE SURFACE-MOUNT
PROGRAMMABLE CRYSTAL CLOCK OSCILLATOR
PROGRAMMABLE CRYSTAL CLOCK OSCILLATOR
HCMOS/TTL COMPATIBLE SURFACE-MOUNT
PROGRAMMABLE CRYSTAL CLOCK OSCILLATOR
|||||||||||||||
AP5S
STANDARD SPECIFICATIONS:
*PB FREE & ROHS COMPLIANT
OPTIONS AND PART IDENTIFICATION
(Left blank if standard)
:
OUTLINE DRAWING:
Temperature options:
L for -40°C to +85°C
Overall Frequency stability options:
R for ± 25 ppm max.
AP5S - Frequency - Temperature - Overall Frequency Stability - Standby -
Drive Strength - Packaging
Drive Strength:
D for High Drive
Drive Strength:
B for Sleep Mode
Packaging option:
T for Tape and Reel (1,000pcs/reel)
* Can drive CMOS, HCMOS, and TTL inputs
MARKING with options:
- Line 1 : AP5xxxRB, LB, LRB
(xxx.xx: Frequency; R for Stability or
L for Temp, & B for Stand-by)
- Line 2: 042104 (Six digit lot & blank date code, Ex: AP180.00, AP45.00)
rev1.1-10/05
FEATURES:
• Performance equivalent to fixed frequency oscillator
• Lowest peak-to-peak jitter
• Low supply current
PARAMETERS
10 MHz to 200 MHz (3.3V)
10 MHz to 166 MHz (2.5V)
10 MHz to 133 MHz (1.8V)
0°C to + 70°C (see options)
- 55°C to +125°C
± 50 ppm max. (see options)
1.8 to 3.3Vdc ± 10%
6.5mA typ. (3.3V), 5.5mA typ. (2.5V & 1.8V)
45/55% max.
(PLL Disabled)
; 47.5/52.5% max
(PLL Enabled)
2.5ns typ.; 3.5nS max (10%/90%, 15pF Load)
VOH = Vdd-0.4V min.
VOL = 0.4V max.
10mS max
“1” (VIH = 2.0V min) or open: Oscillation
“0” (VIL = 0.8V max) : Hi Z
10 µA max.
70pS typ.
2.5pS typ.
CMOS
5.0 x 3.2 x 1.1mm
PIN
1
2
3
4
FUNCTION
OE or Stand-By
Ground/Case
Output
VDD
• Alternative to long lead-time XO's
Available Q3 2006
