RT Series Aluminum Electrolytic Capacitors (General Purpose,Axial) MERITEK FEATURES * * * Wide CV value range Load life 2000hrs at 85oC High performance SPECIFICATIONS Item Characteristic o o Operating Temp Range -40 C to +85 C Rated Working Voltage Capacitance Tolerance Leakage Current (25oC ) 6.3 to 100VDC o o -25 C to +85 C 160 to 450VDC 20% (M) Rated Voltage Time Leakage current (I) 100V > 100V After 3 minutes I 0.01CV or 3 A Whichever is greater I 0.03CV +10 A C= Nominal Capacitance (F) V= Rated voltage Surge voltage (25oC) Dissipation Factor Tan (120Hz, 25 oC) Low Temperature Stability WV 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450 SV 8 13 20 32 44 63 79 125 200 250 300 400 450 500 Add 0.02 per 100F for more than 100F WV 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450 tan 0.24 0.20 0.17 0.15 0.12 0.10 0.10 0.08 0.20 0.20 0.20 0.25 0.25 0.25 Impedance ratio at 120Hz Rated voltage 6.3 10 16 25 35-100 160-250 350-450 o o 4 3 2 2 2 8 12 o o 10 8 6 4 3 -25 C to +25 C -40 C to +25 C Load Life Shelf Life o After 2000 hours application of WV at +85 C the capacitor shall meet the following limits Capacitance change 20% of initial value Dissipation Factor 150% of initial specified value Leakage current initial specified value o At 85 C no voltage applied after 500 hours the capacitor shall meet the following limits Capacitance change 20% of initial value Dissipation Factor 200% of initial specified value Leakage current 200% of initial specified value PART NUMBERING SYSTEM RT CASE SIZE 16V 222 M TA 13 x 21 D 6.3 8 10 13 16 18 Meritek Series d Voltage 0.6 0.8 Capacitance Expressed in microfarads (F). First two digits are significant figures. Third digit denotes number of zeros. `R' Denotes decimal point for values less than 10 F. Tolerance - M = 20% Package CODE TA Tape & Ammo TR Tape & Reel BLANK Bulk Case size - (D) Diameter X (L) Length in mm (Optional) A suffix may be added to denote customer specific features Specifications are subject to change without notice. rev.6a Aluminum Electrolytic Capacitors RT Series (General Purpose,Axial) CASE SIZE WV Case size: 6.3 10 16 25 35 50 MERITEK D x L (mm) 63 F 0.1 to 0.47 1 6.3X13 6.3X13 2.2 6.3X13 3.3 4.7 6.3X13 6.3X13 10 22 33 47 6.3X13 6.3X13 6.3X13 6.3X13 6.3X13 6.3X13 8X13 6.3X16 8X13 6.3X13 6.3X13 6.3X13 8X13 8X13 8X16 100 220 6.3X13 8X13 6.3X13 8X13 6.3X13 8X13 8X13 8X16 8X16 10X17 10X17 10X22 10X17 13X22 330 8X16 8X16 10X17 10X17 10X22 13X22 13X27 470 1000 8X16 10X17 8X16 10X17 10X17 10X22 10X22 13X22 13X22 13X27 13X27 16X33 16X27 16X33 18X36 2200 13X22 10X22 13X27 16X27 16X33 3300 4700 13X27 16X27 13X27 16X27 16X27 16X33 16X33 18X36 18X36 100 160 200 250 350 400 0.1 to 0.47 6.3X13 6.3X13 6.3X13 6.3X13 6.3X13 6.3X13 1 2.2 6.3X13 6.3X13 6.3X13 6.3X16 6.3X13 6.3X16 6.3X16 8X16 8X16 8X21 8X16 8X21 3.3 6.3X13 8X16 8X16X 8X16 10X22 10X22 10X22 4.7 10 6.3X13 6.3X16 8X16 10X22 8X16 10X22 10X22 10X27 10X27 13X27 10X27 13X27 10X27 13X27 CASE SIZE WV Case size: D x L (mm) 450 F 8X16 8X21 22 8X16 10X27 13X27 13X27 13X32 16X33 16X43 33 47 10X17 10X22 13X27 13X32 13X27 13X32 13X27 13X35 16X33 18X43 16X43 18X43 100 13X22 16X33 16X43 16X43 220 330 16X27 16X33 18X43 470 16X43 Custom sizes available upon request Custom values and tolerances available upon request