SEMiX453GD176HDc
© by SEMIKRON Rev. 1 – 24.06.2010 1
SEMiX® 33c
GD
Trench IGBT Modules
SEMiX453GD176HDc
Features
• Homogeneous Si
• Trench = Trenchgate technology
•V
CE(sat) with positive temperature
coefficient
• UL recognised file no. E63532
Typical Applications*
• AC inverter drives
•UPS
• Electronic welders
Absolute Maximum Ratings
Symbol Conditions Values Unit
IGBT
VCES 1700 V
ICTj= 150 °C Tc=25°C 444 A
Tc=80°C 315 A
ICnom 300 A
ICRM ICRM = 2xICnom 600 A
VGES -20 ... 20 V
tpsc
VCC = 1000 V
VGE ≤ 20 V
VCES ≤ 1700 V
Tj= 125 °C 10 µs
Tj-55 ... 150 °C
Inverse diode
IFTj= 150 °C Tc=25°C 545 A
Tc=80°C 365 A
IFnom 300 A
IFRM IFRM = 2xIFnom 600 A
IFSM tp= 10 ms, sin 180°, Tj=25°C 2900 A
Tj-40 ... 150 °C
Module
It(RMS) 600 A
Tstg -40 ... 125 °C
Visol AC sinus 50Hz, t = 1 min 4000 V
Characteristics
Symbol Conditions min. typ. max. Unit
IGBT
VCE(sat) IC=300A
VGE =15V
chiplevel
Tj=25°C 22.45V
Tj= 125 °C 2.45 2.9 V
VCE0 Tj=25°C 11.2V
Tj= 125 °C 0.9 1.1 V
rCE VGE =15V Tj=25°C 3.3 4.2 mΩ
Tj= 125 °C 5.2 6.0 mΩ
VGE(th) VGE=VCE, IC= 12 mA 5.2 5.8 6.4 V
ICES VGE =0V
VCE = 1700 V
Tj=25°C 3mA
Tj= 125 °C mA
Cies VCE =25V
VGE =0V
f=1MHz 26.4 nF
Coes f=1MHz 1.10 nF
Cres f=1MHz 0.88 nF
QGVGE =- 8 V...+ 15 V 2799 nC
RGint Tj=25°C 2.50 Ω
td(on) VCC = 1200 V
IC=300A
RG on =4.3Ω
RG off =4.3Ω
Tj= 125 °C 335 ns
trTj= 125 °C 70 ns
Eon Tj= 125 °C 215 mJ
td(off) Tj= 125 °C 990 ns
tfTj= 125 °C 150 ns
Eoff Tj= 125 °C 125 mJ
Rth(j-c) per IGBT 0.071 K/W
http://store.iiic.cc/
SEMiX453GD176HDc
2 Rev. 1 – 24.06.2010 © by SEMIKRON
Characteristics
Symbol Conditions min. typ. max. Unit
Inverse diode
VF = VEC IF=300A
VGE =0V
chip
Tj=25°C 1.5 1.70 V
Tj= 125 °C 1.4 1.6 V
VF0 Tj=25°C 0.9 1.1 1.3 V
Tj= 125 °C 0.7 0.9 1.1 V
rFTj=25°C 1.3 1.3 1.3 mΩ
Tj= 125 °C 1.8 1.8 1.8 mΩ
IRRM IF=300A
di/dtoff = 4700 A/µs
VGE =-15V
VCC = 1200 V
Tj= 125 °C 350 A
Qrr Tj= 125 °C 115 µC
Err Tj= 125 °C 65 mJ
Rth(j-c) per diode 0.11 K/W
Module
LCE 20 nH
RCC'+EE' res., terminal-chip TC=25°C 0.7 mΩ
TC= 125 °C 1mΩ
Rth(c-s) per module 0.014 K/W
Msto heat sink (M5) 3 5 Nm
Mtto terminals (M6) 2.5 5 Nm
Nm
w900 g
Temperatur Sensor
R100 Tc=100°C (R25=5 kΩ) 493 ± 5% Ω
B100/125
R(T)=R100exp[B100/125(1/T-1/T100)];
T[K];
3550
±2% K
SEMiX® 33c
GD
Trench IGBT Modules
SEMiX453GD176HDc
Features
• Homogeneous Si
• Trench = Trenchgate technology
•V
CE(sat) with positive temperature
coefficient
• UL recognised file no. E63532
Typical Applications*
• AC inverter drives
•UPS
• Electronic welders
http://store.iiic.cc/
SEMiX453GD176HDc
© by SEMIKRON Rev. 1 – 24.06.2010 3
Fig. 1: Typ. output characteristic, inclusive RCC'+ EE' Fig. 2: Rated current vs. temperature IC = f (TC)
Fig. 3: Typ. turn-on /-off energy = f (IC)Fig. 4: Typ. turn-on /-off energy = f (RG)
Fig. 5: Typ. transfer characteristic Fig. 6: Typ. gate charge characteristic
http://store.iiic.cc/
SEMiX453GD176HDc
4 Rev. 1 – 24.06.2010 © by SEMIKRON
Fig. 7: Typ. switching times vs. ICFig. 8: Typ. switching times vs. gate resistor RG
Fig. 9: Typ. transient thermal impedance Fig. 10: Typ. CAL diode forward charact., incl. RCC'+EE'
Fig. 11: Typ. CAL diode peak reverse recovery current Fig. 12: Typ. CAL diode recovery charge
http://store.iiic.cc/
SEMiX453GD176HDc
© by SEMIKRON Rev. 1 – 24.06.2010 5
This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX
* The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested
for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is
subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our personal.
SEMiX 33c
pinout
http://store.iiic.cc/
