RS1A - RS1M WTE POWER SEMICONDUCTORS Pb 1.0A SURFACE MOUNT GLASS PASSIVATED FAST RECOVERY DIODE Features Glass Passivated Die Construction Ideally Suited for Automatic Assembly Low Forward Voltage Drop, High Efficiency Surge Overload Rating to 30A Peak Low Power Loss Fast Recovery Time Plastic Case Material has UL Flammability Classification Rating 94V-O B D A F C H SMA/DO-214AC Dim Min Max A 2.50 2.90 B 4.00 4.60 C 1.20 1.60 D 0.152 0.305 E 4.80 5.28 F 2.00 2.44 G 0.051 0.203 H 0.76 1.52 All Dimensions in mm Mechanical Data Case: SMA/DO-214AC, Molded Plastic Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026 Polarity: Cathode Band or Cathode Notch Marking: Type Number Weight: 0.064 grams (approx.) Lead Free: For RoHS / Lead Free Version, Add "-LF" Suffix to Part Number, See Page 4 Maximum Ratings and Electrical Characteristics Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TL = 90C G E @TA=25C unless otherwise specified Symbol RS1A RS1B RS1D RS1G RS1J RS1K RS1M Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 1.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A Forward Voltage @IF = 1.0A VFM 1.30 V @TA = 25C @TA = 125C IRM 5.0 300 A Peak Reverse Current At Rated DC Blocking Voltage Reverse Recovery Time (Note 1) trr Typical Junction Capacitance (Note 2) Cj 10 pF RJL 32 C/W Tj, TSTG -50 to +150 C Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range 150 250 500 nS Note: 1. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. 3. Mounted on P.C. Board with 8.0mm2 land area. RS1A - RS1M 1 of 4 (c) 2006 Won-Top Electronics IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 1.2 1.0 0.8 0.6 0.4 0.2 10 1.0 0.1 Tj = 25C IF Pulse Width: 300s 0.01 0 25 50 75 100 125 150 0 175 30 Single Half-Sine-Wave (JEDEC Method) Tj = 150C 20 10 0 1 10 0.8 1.2 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics IR, INSTANTANEOUS REVERSE CURRENT (A) IFSM, PEAK FORWARD SURGE CURRENT (A) TL , LEAD TEMPERATURE ( C) Fig. 1 Forward Current Derating Curve 0.4 1000 Tj = 125C 100 10 Tj = 25C 1.0 0.1 0 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Forward Surge Current Derating Curve 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics trr +0.5A 50 NI (Non-inductive) 10 NI Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) 1.0 NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0M, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50. -1.0A Set time base for 10ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit RS1A - RS1M 2 of 4 (c) 2006 Won-Top Electronics MARKING INFORMATION RECOMMENDED FOOTPRINT 0.050 MIN (1.27 MIN) WTE RS1x Cathode WTE RS1x x 0.058 MIN (1.47 MIN) = Polarity Band = Manufacturer's Logo = Device Number = A, B, D, G, J, K or M 0.083 MAX (2.11 MAX) inches(mm) PACKAGING INFORMATION TAPE & REEL Direction of Unreeling 4mm 330mm 12mm 4mm 1.6mm 12mm Product ID Label Reel Diameter (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 330 7,500 340 x 337 x 45 15,000 370 x 370 x 420 120,000 17.5 Note: 1. Paper reel, white or gray color. 2. Components are packed in accordance with EIA standard 481-1 and 481-2. RS1A - RS1M 3 of 4 (c) 2006 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity RS1A-T3 SMA 7500/Tape & Reel RS1B-T3 SMA 7500/Tape & Reel RS1D-T3 SMA 7500/Tape & Reel RS1G-T3 SMA 7500/Tape & Reel RS1J-T3 SMA 7500/Tape & Reel RS1K-T3 SMA 7500/Tape & Reel RS1M-T3 SMA 7500/Tape & Reel 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add "-LF" suffix to part number above. For example, RS1A-T3-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com We power your everyday. RS1A - RS1M 4 of 4 (c) 2006 Won-Top Electronics