Blocks and Holders
127
www.littelfuse.com
Blocks and Holders
© 2005 Littelfuse • POWR-GARD™ Products Catalog
DIN Rail Adapter — FBDIN1
FBDIN1 is for use with 30A Midget, Class CC and Class G fuse blocks.
The patented design permits snap-mounting of Littelfuse Class CC and
Midget 30A fuse blocks directly to standard and low profile 35mm sym-
metrical “hat” and 32mm asymmetrical DIN rails. Adapters snap securely
to Littelfuse fuse blocks and to DIN rails without tools. They may be
readily removed from rails by lifting the disconnect tab.
Class CC and Midget Fuse Block Accessories
DIN Rail Adapters and Cover Pullers
Cover Puller — SPL001
Littelfuse Class CC and Midget fuse cover puller is designed to provide
protection to personnel, as well as make removal of fuses from fuse
blocks easy and safe. Once installed on the fuse, the cover puller allows
removal of the fuse without the use of a separate puller.
• Meets “Dead Front” requirements for use in control panels.
• Permits safe, easy removal.
• Works with existing fuse block. No special hinged fuse blocks are required.
• Easily gangable with 1/8" diameter wire.
• For use with all 600 volt Class CC and Midget 1/10 — 30A fuses.
• Use with Class CC L60030C series and L60030M series fuse blocks.
• Label provided for easy fuse identification.
• For 2-pole cover puller, order DSPL001.
0.484"
0.670"
1.360"
0.750" 1.490"
0.576" 0.770"
DIN 35
Standard Rail DIN 35
Low Profile DIN 32
Standard Rail
1.22"
0.665"
3.0"
