Crystal Clock Oscillator 3.3 & 5V, HCMOS/LVCMOS, TTL Technical Data S1800 / S1803 / S1850 Series Frequency Range: 1.5440 MHz to 80 MHz Frequency Stability: 20, 25, 50, 100 ppm over all conditions; calibration, tolerance, operating temperature, input voltage change, load change, shock and vibration and aging* (1 Year @ 25C average ambient temperature) *Aging ACTUAL SIZE Description The 5V S1800, S1850 and 3.3V S1803 are crystal-controlled, low-current oscillators providing precise rise and fall times to drive high speed CMOS and TTL loads. The sub-miniature, very low profile leadless ceramic packages have gold-plated contact pads, ideal for today's pick-andplace SMT environments. The S1850 is a high output load version available to 80 MHz. Applications & Features * Sub-miniature, 1.1 mm high ceramic package ideal for SMT applications * 10A max standby mode on S1800 and S1803 * Tight Stability, low power, and low profile ideal for 802.11 applications * Available as 3.3V and 5V versions LVCMOS, HCMOS, TTL compatible * Perfect for PC's; notebook, palmtop computers; portable applications; PCMCIA cards;disc drives. Anywhere small size, low power, surface mountability are a priority * Available on tape & reel; 16mm tape, 1000pcs per reel Temperature Range: Operating: Storage: -10 to +70C or -40 to +85C -55 to +125C Supply Voltage: +5.0V 10%, 3.3V 10% Supply Current: 1.544 to 32 MHz: 32+ to 50 MHz: 50+ to 80 MHz: Output disabled (Standby): Output: Symmetry: Rise & Fall Times: Logic 0: Logic 1: Load: Accumulated Jitter: Phase Jitter: Total Jitter: S1800 25mA max 35mA max n/a 10A max S1803 15mA max 25mA max 40mA max 10A max S1850 27mA max 35mA max 75mA max n/a 45/55% max @ 50% VDD, 40/60% max @ 1.5V on S1800 & 1850 S1800: 10ns max, 20% to 80% VDD S1803: 7ns max, (to 50MHz), 5ns (>50 MHz), 20% to 80% VDD S1850: 7ns max, 20% to 80% VDD 10% VDD max 90% VDD min S1800/S1803: 15pF max, 10 LSTTL S1850: 50 pF max 1.544 to 50 MHz, 10 TTL 30 pF max 50+ to 70 MHz, 10 TTL 20 pF max 70+ to 80 MHz (HCMOS), 10 TTL 5ps RMS (1-sigma) max in 20,000 adjacent periods 1.5ps RMS (1-sigma) max in 10kHz ~ 20MHz freq. band 50ps max peak-to-peak in 100,000 random periods Mechanical: Shock: Solderability: Vibration: Solvent Resistance: Terminal Strength: Resistance to Soldering Heat: Environmental: Thermal Shock: Moisture Resistance: MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2007, Condition A MIL-STD-202, Method 215 MIL-STD-883, Method 2004, Condition D MIL-STD-202, Method 210, Condition I or J MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 DS-181 www.pericom.com/saronix REV G Crystal Clock Oscillator 3.3 & 5V, HCMOS/LVCMOS, TTL Technical Data S1800 / S1803 / S1850 Series Part Numbering Guide Package Details S 1803 A - 44.0000 (T) (T) = Tape & Reel full reel increments only Blank = Bulk packaged Saronix Frequency (MHz) Stability Tolerance AA = 20ppm, -10 to +70C A = 25ppm, -10 to +70C B = 50ppm, -10 to +70C C = 100ppm, -10 to +70C E = 50ppm, -40 to +85C F = 100ppm, -40 to +85C Series S1800 = 5.0V, 1.544 to 50 MHz, standby S1803 = 3.3V, 1.544 to 80 MHz, standby S1850 = 5.0V, 1.544 to 80 MHz, high drive Test Circut Marking Format* *Exact location of items may vary Recommended Land Pattern Tri-State Control Characteristics (low power stand-by for S1800/S1803) S1850 2.2V or N/C 0.8V or GND 100ns 100ns 50k Output Oscillation (Vin): Output High Impdeance (VIN): Disable Output Delay: Enable Output Delay: Internal Pullup Resistance: S1800/S1803 2.2V or N/C 0.8V or GND 100ns (to Stand-by mode) 10ms (from Stand-by mode) 50k Output Waveform Solder Reflow Guide DS-181 www.pericom.com/saronix REV G