SPECIFICATION (Reference sheet)
Supplier : Samsung electro-mechanics Samsung P/N : CL05B472KB5NNND
Product : Multi-layer Ceramic Capa citor Description : CAP, 4.7㎋, 50V, ±10%, X7R, 0402
CL 05 B472 K B 5 N N N D
① ②③ ④ ⑤⑥⑦ ⑧ ⑨⑩⑪
①Series Samsung Multi-layer Ceramic Capacitor
②Size 0402 (inch code) L: 1.0 ± 0.05 mm W: ± 0.05 mm
③Dielectric X7R ⑧Inner electrode
④Capacitance 4.7 ㎋Termination
⑤Capacitance ±10 % Plating (Pb Free)
tolerance ⑨Product Normal
⑥Rated Voltage 50 V ⑩Special Reserved for future use
⑦Thickness 0.5 ± 0.05 mm ⑪Packaging Cardboard Type, 13" reel
B. Samsung Reliability Test and Judgement condition
A. Samsung Part Number
Sn 100%
Cu
Ni
0.5
Capacitance Within specified tolerance 1㎑±10% 1.0±0.2Vrms
Tan δ (DF) 0.025 max.
Insulation 10,000Mohm or 500Mohm㎌Rated Voltage 60~120 sec.
Resistance Whichever is Smaller
Appearance No abnormal exterior appearance Microscope (10)
Withstanding No dielectric breakdown or of the rated voltage
Voltage mechanical breakdown
Temperature X7R
Characteristics (From -55℃ to 125℃, Capacitance change should be within ±15%)
Adhesive Strength No peeling shall be occur on the 500gF, for 10±1 sec.
of Termination terminal electrode
Bending Strength Capacitance change : within ±12.5% Bending to the limit (1mm)
with 1.0mm/sec.
Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder
is to be soldered newly 245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance to Capacitance change : within ±7.5% Solder pot : 270±5℃, 10±1sec.
Soldering heat Tan δ, IR : initial spec.
Performance Test condition
250%