SPEC NO: DSAJ1377 REV NO: V.2 DATE: MAR/26/2009 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo ERP: 1203008901
3.2x1.6mm SMD CHIP LED LAMP
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: APTD3216PBC/Z-PRV-SI Blue
Features
z3.2mmX1.6mm SMT LED, 1.8mm thickness.
zLow power consumption.
zIdeal for backlight and indicator.
zVarious colors and lens types available.
zPackage: 2000pcs / reel .
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The Blue source color devices are made with InGaN Light
Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAJ1377 REV NO: V.2 DATE: MAR/26/2009 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo ERP: 1203008901
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APTD3216PBC/Z-PRV-SI Blue (InGaN) WATER CLEAR 480 1000 50°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Blue 458 nm IF=20mA
λD [1] Dominant Wavelength Blue 465 nm IF=20mA
Δλ1/2 Spectral Line Half-width Blue 22 nm IF=20mA
C Capacitance Blue 110 pF VF=0V;f=1MHz
VF [2] Forward Voltage Blue 3.2 3.7 V IF=20mA
IR Reverse Current Blue 10 uA VR=5V
Parameter Blue Units
Power dissipation 111 mW
DC Forward Current 30 mA
Peak Forward Current [1] 100 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAJ1377 REV NO: V.2 DATE: MAR/26/2009 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo ERP: 1203008901
Blue APTD3216PBC/Z-PRV-SI
SPEC NO: DSAJ1377 REV NO: V.2 DATE: MAR/26/2009 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo ERP: 1203008901
APTD3216PBC/Z-PRV-SI
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Dimensions
(Units : mm)
SPEC NO: DSAJ1377 REV NO: V.2 DATE: MAR/26/2009 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo ERP: 1203008901
PACKING & LABEL SPECIFICATIONS APTD3216PBC/Z-PRV-SI
