Product data sheet Characteristics XPSAK351144 module XPSAK - Emergency stop - 120 V AC Range of product Preventa Safety automation Product or component type Preventa safety module Safety module name XPSAK Safety module application For emergency stop, switch, sensing mat/edges or safety light curtain monitoring Function of module Monitoring of electro-sensitive protection equipment (ESPE) Monitoring of a movable guard associated with 2 switches and automatic start Monitoring of a movable guard Emergency stop monitoring 1-channel wiring Emergency stop with 2 NC contacts monitoring 2channel wiring Multiple emergency stop monitoring 2-channel wiring Proximity sensor monitoring Sensing mat and edges monitoring Safety level Can reach SILCL 3 conforming to EN/IEC 62061 Can reach PL e/category 4 conforming to EN/ISO 13849-1 Safety reliability data PFHd = 7.39E-9 1/h conforming to EN/IEC 62061 MTTFd = 154.5 years conforming to EN/ISO 13849-1 DC > 99 % conforming to EN/ISO 13849-1 Type of start Configurable Connections - terminals Captive screw clamp terminals (2 x 0.5...2 x 1.5 mm)flexible cable with cable end, with double bezel Captive screw clamp terminals (2 x 0.25...2 x 1 mm)flexible cable with cable end, with double bezel Captive screw clamp terminals (2 x 0.14...2 x 0.75 mm)solid cable with cable end, with double bezel Captive screw clamp terminals (2 x 0.14...2 x 0.75 mm)flexible cable with cable end, with double bezel Captive screw clamp terminals (1 x 0.25...1 x 2.5 mm)flexible cable with cable end, with double bezel Captive screw clamp terminals (1 x 0.25...1 x 1.5 mm)flexible cable with cable end, with double bezel Captive screw clamp terminals (1 x 0.14...1 x 2.5 mm)solid cable with cable end, with double bezel Captive screw clamp terminals (1 x 0.14...1 x 2.5 mm)flexible cable with cable end, with double bezel Output type Relay instantaneous opening 3 NO, volt-free Number of additional circuits 1 NC + 4 solid state outputs [Us] rated supply voltage 24 V DC (- 15...10 %) 120 V AC (- 15...10 %) Complementary Synchronisation time between inputs 2 or 4 s depending of wiring (automatic start) Unlimited (manual start) Supply frequency 50/60 Hz Power consumption in VA <= 6 VA AC Input protection type Internal, electronic Control circuit voltage 24 V DC Line resistance 28 Ohm Breaking capacity C300: 1800 VA, AC-15 (inrush) for relay output C300: 180 VA, AC-15 (holding) for relay output Mar 9, 2013 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Main Breaking capacity 1.5 A at 24 V (DC-13) time constant: 50 ms for relay output Output thermal current 6 A per relay for relay output [Ith] conventional free air thermal current 18 A Associated fuse rating 6 A fuse type fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200 4 A fuse type gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200 Minimum output current 10 mA for relay output Minimum output voltage 17 V for relay output Response time on input open <= 40 ms [Ui] rated insulation voltage 300 V (degree of pollution: 2) conforming to IEC 60647-5-1, DIN VDE 0110 part 1 [Uimp] rated impulse withstand voltage 4 kV overvoltage category III conforming to IEC 60647-5-1, DIN VDE 0110 part 1 Local signalling 4 LEDs Current consumption 30 mA at 24 V AC (on power supply) Mounting support 35 mm symmetrical DIN rail Product weight 0.4 kg Environment Standards EN 1088/ISO 14119 EN/IEC 60204-1 EN/IEC 60947-5-1 EN/ISO 13850 Product certifications CSA TUV UL IP degree of protection IP40 (enclosure) conforming to EN/IEC 60529 IP20 (terminals) conforming to EN/IEC 60529 Ambient air temperature for operation -10...55 C Ambient air temperature for storage -25...85 C 2 Product data sheet Dimensions Drawings XPSAK351144 Dimensions 3 Product data sheet Connections and Schema XPSAK351144 Wiring Diagrams Refer to the Instruction Sheet To download the instruction sheet, follow below procedure: 1 2 Click on Download & Documents. Click on Instruction sheet. 4