LITE-ON SEMICONDUCTOR PR2001G thru PR2007G REVERSE VOLTAGE - 50 to 1000 Volts FORWARD CURRENT - 2.0 Amperes FAST RECOVERY GLASS PASSIVATED RECTIFIERS DO-15 FEATURES Fast switching for high efficiency Glass passivated chip Low reverse leakage current Low forward voltage drop High current capability Plastic material has UL flammability classification 94V-0 A A B C D DO-15 MECHANICAL DATA Min. Dim. A Case : JEDEC DO-15 molded plastic Polarity : Color band denotes cathode Weight : 0.015 ounces, 0.4 grams Mounting position : Any Max. 25.4 5.80 7.60 B 0.71 0.86 C 2.60 3.60 D All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% SYMBOL CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current VRRM VRMS VDC PR 2001G 50 35 50 PR 2002G 100 70 100 PR 2003G 200 140 200 PR 2004G 400 280 400 PR 2005G 600 420 600 PR 2006G 800 560 800 PR 2007G 1000 700 1000 UNIT V V V I(AV) 2.0 A IFSM 80 A Maximum forward Voltage at 2.0A DC VF 1.3 V Maximum DC Reverse Current at Rated DC Blocking Voltage IR 5.0 100 uA CJ 35 pF Typical Thermal Resistance (Note 2) R0JA 25.0 C/W Maximum Reverse Recovery Time (Note 3) TRR @TA=55 C Peak Forward Surge Current 8.3ms single half sine-wave super imposed on rated load @TJ =25 C @TJ =125 C Typical Junction Capacitance (Note1) Operating Temperature Range Storage Temperature Range 250 150 TJ -55 to +150 TSTG -55 to +150 NOTES : 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Thermal Resistance Junction to Ambient. 3.Reverse Recovery Test Conditions:IF=0.5A,IR=1A,IRR =0.25A. uA 500 ns C C REV. 2, 01-Dec-2000, KDED02 RATING AND CHARACTERISTIC CURVES PR2001G thru PR2007G 2.5 2.0 1.5 1.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.5 0 25 50 75 100 125 150 FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 3.0 120 100 80 60 40 Single Half-Sine-Wave (JEDEC METHOD) 20 0 175 1 2 5 AMBIENT TEMPERATURE , C 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.3 - TYPICAL JUNCTION CAPACITANCE 100 10 INSTANTANEOUS FORWARD CURRENT ,(A) CAPACITANCE , (pF) 10 10 TJ = 25 C, f= 1MHz 1.0 TJ = 25 C 0.1 .01 1 1 4 10 REVERSE VOLTAGE , VOLTS 100 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE , VOLTS REV. 2, 01-Dec-2000, KDED02