The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Couplers with Connectors (H Type) HDH Series Features 1.High Performance The high frequency characteristics feature extremely low loss, a high degree of matching, and high isolation. HDH-00803GHD(40) HDH-01503GHD(40) 2.Power Uniform Distribution and 90Phase Difference Type This is a one input, two output (or two input, one output) power uniform distribution type having a 90phase difference between the two outputs (or two inputs). HDH-01503GH(40) HDH-03003GHD(40) 3.Miniature and Lightweight Corrosion-resistant aluminum is used for the case and the Hirose Electric original pattern design, which uses a stripline triplate method, enables the couplers to be miniature and lightweight. HDH-06003GHD(40) HDH-09003GHD(40) HDH-12803CHD(40) 4.Couplers with SMA Connectors Use of SMA connectors (Hirose Electric HRM Series) which feature stainless steel for the exterior cladding make these couplers durable. Product Specifications Ratings Frequency range (Note) Characteristic impedance Maximum Input Power (Note) 0.5 to 14.5 GHz 50 ohm 2 to 50 W Operating temperature range Operating relative humidity -10c to +65c 95% Max. Note: The frequency range and the maximum input power will differ depending on the products. Item 1.Vibration 2.Shock Standard Conditions Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm, No electrical discontinuity of 1 s or more acceleration of 98 m/s2 for 2 hours in each of 3 directions No damage, cracks, or parts dislocation Acceleration of 490 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature : _55c +15c to +35c +85c +15c to +35c 3.Temperature cycle No damage, cracks, or parts dislocation Time : 30 15 max. 30 15 max. (Minutes) 5 cycles The test method conforms to MIL-STD-202. Materials Part 14 Material Finish Connector Body Stainless steel Passivated Connector female contacts Beryllium copper Gold plating Connector Insulator PTFE --------- Case Aluminum Coating Board Dielectric Gold plating 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS searchHDH at www.hirose-connectors.com, contact your Hirose sales SeriesCouplersorwith Connectors (Hrepresentative. Type) Ordering Information HD H - 008 03 G H D (40) 1 2 3 4 5 1 Series Name: HD (Directional Couplers) 6 7 8 4 Coupling 03:3dB 2 Type of Connector 5 Frequency Relative Bandwidth H: Indicates the HRM (SMA) Series B:From 5% to below 10% 3 Center Frequency C:From 10% to below 15% 008: 0.75GHz D:From 15% to below 20% 015: 1.5GHz G:From 30% to below 35% 017: 1.7GHz 6 Form 020: 2.0GHz H:H Type 030: 3.0GHz 7 D:With Termination 040: 4.0GHz 060: 6.0GHz 8 (40):RoHS Compliant 090: 9.0GHz 128: 12.8GHz Specifications Part Number Frequency Primary Line Secondary Line Coupling Frequency Directivity Range V.S.W.R. V.S.W.R. (dB) Sensitivity (dB Min) (GHz) (Max) (Max) Weight (g) Power (W) HDH-00803GHD(40) 0.5~1.0 3+0.2 0 0.5 20 1.15 1.15 49 2 HDH-01503GH(40) 1.0~2.0 3+0.2 0 0.5 20 1.20 1.20 34 50 HDH-01503GHD(40) 1.0~2.0 3+0.2 0 0.5 20 1.20 1.20 34 2 HDH-01703CH(40) 1.5~1.9 3+0.2 0 0.3 20 1.20 1.20 34 50 HDH-01703CHD(40) 1.5~1.9 3+0.2 0 0.3 20 1.20 1.20 34 2 HDH-02003DHD(40) 1.7~2.3 3+0.2 0 0.3 18 1.20 1.20 34 2 HDH-03003GHD(40) 2.0~4.0 3+0.2 0 0.5 18 1.20 1.20 25 2 HDH-04003BH(40) 3.7~4.2 3+0.2 0 0.3 20 1.20 1.20 23 50 HDH-06003GHD(40) 4.0~7.8 3+0.3 0 0.5 17 1.25 1.25 23 2 HDH-09003GHD(40) 8.0~11.0 3+0.3 0 0.5 15 1.30 1.30 31 2 HDH-12803CHD(40) 10.5~14.5 3+0.6 0 0.5 12 1.40 1.40 31 2 RoHS YES Directivity have had the coupling (nominal value of 3 dB) subtracted. There is a phase difference of 90between the output and the coupling. 15 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or willConnectors be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. HDH SeriesCouplers with (H Type) External Dimensions (40) (40) (40) (40) (40) (40) (40) (40) 16 (40) (40) (40) 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS searchHDH at www.hirose-connectors.com, contact your Hirose sales SeriesCouplersorwith Connectors (Hrepresentative. Type) Typical Data (40) (40) 17 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Couplers with Connectors (I Type) HDH Series Features 1.High Performance The high frequency characteristics feature. Extremely high degree of matching, and high isolation. HDH-00810GID(40) HDH-01510GID(40) 2.Miniature and Lightweight Corrosion-resistant aluminum is used for the case and the Hirose Electric original pattern design, which uses a stripline triplate method, enables the couplers to be miniature and lightweight. 3.Couplers with SMA Connectors HDH-02249AI(40) HDH-03020GID(40) Use of SMA connectors (Hirose Electric HRM Series) which feature stainless steel for the exterior cladding make these couplers durable. 4.Full Coupling Variations Full variations of coupling over 6 dB are available. HDH-06020GID(40) HDH-09010GID(40) HDH-12806CID(40) Product Specifications Ratings Frequency range (Note) Characteristic impedance Maximum Input Power (Note) 0.5 to 14.5 GHz 50 ohm 4 to 50 W Operating temperature range Operating relative humidity -10c to +65c 95% Max. Note: The frequency range and the maximum input power will differ depending on the products. Item 1.Vibration 2.Shock Standard Conditions Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm, No electrical discontinuity of 1s or more acceleration of 98 m/s2 for 2 hours in each of 3 directions No damage, cracks, or parts dislocation Acceleration of 980 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature : _55c +15c to +35c +85c +15c to +35c 3.Temperature cycle No damage, cracks, or parts dislocation Time : 30 15 max. 30 15 max. (Minutes) 5 cycles The test method conforms to MIL-STD-202. Materials Part 18 Material Finish Connector Body Stainless steel Passivated Connector female contacts Beryllium copper Gold plating Connector Insulator PTFE --------- Case Aluminum Coating Board Dielectric Gold plating 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, contactConnectors your Hirose sales(Irepresentative. HDH SeriesCouplersorwith Type) Ordering Information HD H - 008 10 G I D (40) 1 2 3 4 5 6 7 8 1 Series Name: HD (Directional Couplers) 4 Coupling 2 Type of Connector H: Indicates the HRM (SMA) Series 3 Center Frequency 008 : 0.8GHz 009 : 0.9GHz 015 : 1.5GHz 017 : 1.7GHz 022 : 2.2GHz 030 : 3.0GHz 060 : 6.0GHz 090 : 9.0GHz 128 : 12.8GHz 06 : 6dB 10 : 10dB 20 : 20dB 30 : 30dB 37 : 37dB 49 : 49dB 5 Frequency Relative Bandwidth C: From 10% to below 15% G: From 30% to below 35% 6 Form I: I Type, H: H Type 7 D: With Termination Isolation port with termination is designated as D at the end of each part No. 8 (40): RoHS Compliant Specifications Part Number Secondary Frequency Frequency Insertion Primary Line Coupling Directivity Line Weight Range Sensitivity Loss V.S.W.R. (dB) V.S.W.R. (g) (dB MIN) (GHz) (dB) (dB MAX) (MAX) (MAX) Power (W) HDH-0810GID(40) 0.5~1.0 101.0 0.75 0.3 20 1.15 1.15 49 10 HDH-00820GID(40) 0.5~1.0 201.0 0.75 0.3 18 1.15 1.15 50 50 HDH-00937CI(41) 0.8~1.0 371.0 0.50 0.3 20 1.20 1.20 50 50 HDH-01510GID(40) 1.0~2.0 101.2 0.75 0.4 20 1.20 1.20 34 10 HDH-01520GID(40) 1.0~2.0 201.2 0.75 0.4 18 1.20 1.20 34 50 HDH-01530CI(40) 1.4~1.6 30 0.25 0.5 20 1.20 1.20 34 50 HDH-01537CI(40) 1.4~1.6 37 0.30 0.5 20 1.20 1.20 34 50 HDH-01706CID(40) 1.5~1.9 61.0 0.30 0.4 18 1.20 1.20 34 05 HDH-01710CID(40) 1.5~1.9 101.2 0.30 0.4 20 1.20 1.20 34 10 HDH-01720CID(40) 1.5~1.9 201.2 0.40 0.4 20 1.20 1.20 34 50 HDH-01730CID(40) 1.5~1.9 301.5 0.40 0.4 18 1.20 1.20 34 50 HDH-02210AI(40) 2.11~2.2 101.0 0.25 0.8 18 1.20 1.20 42 50 HDH-02220AID(40) 2.11~2.2 201.0 0.25 0.3 16 1.20 1.20 42 50 HDH-02249AI(40) 2.11~2.2 491.0 0.25 0.3 15 1.20 1.20 42 50 HDH-03010GID(40) 2.0~4.0 101.2 0.75 0.5 18 1.20 1.20 25 10 HDH-03020GID(40) 2.0~4.0 201.2 0.75 0.5 18 1.20 1.20 25 50 HDH-06010GID(40) 4.0~7.8 101.2 0.75 0.5 17 1.25 1.25 23 10 HDH-06020GID(40) 4.0~7.8 201.2 0.75 0.5 17 1.25 1.25 23 50 HDH-09006GID(40) 8.0~11.0 61.2 0.75 0.5 15 1.30 1.30 24 04 HDH-09010GID(40) 8.0~11.0 101.2 0.75 0.5 15 1.30 1.30 24 10 HDH-09020GID(40) 8.0~11.0 202.0 0.75 0.5 13 1.30 1.30 24 10 HDH-12806CID(40) 10.5~14.5 61.0 0.50 2.1 15 1.30 1.35 28 04 HDH-12810CID(40) 10.5~14.5 101.25 0.50 1.1 15 1.30 1.35 28 10 HDH-12820CID(40) 10.5~14.5 201.25 0.50 0.6 15 1.30 1.35 28 50 +1.0 _2.0 +1.0 _1.5 RoHS YES The coupling loss component is not included in the insertion loss (unless the item is marked with an symbol) 19 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or willConnectors be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. HDH SeriesCouplers with (I Type) External Dimensions (40) (40) (40) (40) (40) (40) (41) (40) (40) (40) (40) (40) (40) (40) 20 (40) (40) 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, contactConnectors your Hirose sales(Irepresentative. HDH SeriesCouplersorwith Type) Typical Data HDH-01510GID(40) HDH-03020GID(40) HDH-01530CI(40) HDH-01537CI(40) HDH-09010GID(40) 21 04/2009