12-215/Y2C-BR1S1L/3C - EVERLIGHT ELECTRONICS

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 1 of 10

Device No: DSE-0002358 Prepared date: 15-Sep-2009 Prepared by: PAUL

Technical Data Sheet

Chip LED with Right Angle Lens

12-215/Y2C-BR1S1L/3C

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Mono-color type.

․Pb-free.

․The product itself will remain with in RoHS compliant version

Descriptions

․The 12-215 SMD LED is much smaller than lead

frame type components, thus enable smaller

board size, higher packing density, reduced

storage space and finally smaller equipment to be

obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

․Indoor signboard use.

Device Selection Guide Chip

Part No. Material Emitted Color Resin Color

12-215/Y2C-BR1S1L/3C AlGaInP Brilliant Yellow Water Clear

12-215/Y2C-BR1S1L/3C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 2 of 10

Device No: DSE-0002358 Prepared date: 15-Sep-2009 Prepared by: PAUL

Package Outline Dimensions

C

L

R0.5

L

C

0.5

1.0 0.6

1.7

2.1

0.8 1.3 0.8

0.35

0.9

0.3 1.5 0.3

Cathode Ma sk

Note: The tolerances unless mentioned is ±0.1mm, Unit = mm

12-215/Y2C-BR1S1L/3C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 3 of 10

Device No: DSE-0002358 Prepared date: 15-Sep-2009 Prepared by: PAUL

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit

Reverse Voltage VR 5 V

Forward Current IF 25 mA

Peak Forward Current

(Duty 1/10 @1KHz) IFP 60 mA

Power Dissipation Pd 60 mW

Electrostatic

Discharge(HBM) ESD 2000 V

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40~ +90 ℃

Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.

Hand Soldering : 350 ℃ for 3 sec.

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol Min. Typ. Max. Unit Condition

Luminous Intensity IV 112.0 ----- 225.0 mcd

Peak Wavelength λp ---- 591 ---- nm

Dominant

Wavelength λd 588.5 ----- 594.5 nm

Spectrum Radiation

Bandwidth △λ ----- 15 ---- nm

Viewing Angle 2θ1/2 ----- 130 ---- deg

Forward Voltage VF 1.70 ----- 2.30 V

IF=20mA

Reverse Current IR ---- ---- 10 μA VR=5V

Notes:

1.Tolerance of Luminous Intensity ±11%

2.Tolerance of Dominant Wavelength ±1nm

3.Tolerance of Forward Voltage ±0.05V

12-215/Y2C-BR1S1L/3C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 4 of 10

Device No: DSE-0002358 Prepared date: 15-Sep-2009 Prepared by: PAUL

Bin Range Of Dom. Wavelength

Groups Bin Min Max Unit Condition

D4 588.5 591.5

B D5 591.5 594.5

nm IF =20mA

Bin Range Of Luminous Intensity

Bin Min Max Unit Condition

R1 112 140

R2 140 180

S1 180 225

mcd IF =20mA

Bin Range Of Forward Voltage

Groups Bin Min Max Unit Condition

19 1.70 1.80

20 1.80 1.90

21 1.90 2.00

22 2.00 2.10

23 2.10 2.20

L

24 2.20 2.30

V IF =20mA

Notes:

1.Tolerance of Luminous Intensity ±11%

2.Tolerance of Dominant Wavelength ±1nm

3.Tolerance of Forward Voltage ±0.05V

12-215/Y2C-BR1S1L/3C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 5 of 10

Device No: DSE-0002358 Prepared date: 15-Sep-2009 Prepared by: PAUL

Electro-Optical Characteristics (Ta=25℃)

12-215/Y2C-BR1S1L/3C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 6 of 10

Device No: DSE-0002358 Prepared date: 15-Sep-2009 Prepared by: PAUL

Label explanation

CAT: Luminous Intensity Rank

HUE: Dom. Wavelength Rank

REF: Forward Voltage Rank

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

12-215/Y2C-BR1S1L/3C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 7 of 10

Device No: DSE-0002358 Prepared date: 15-Sep-2009 Prepared by: PAUL

Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Moisture Resistant Packaging

Label Aluminum moisture-proof bag Desiccant Label

12-215/Y2C-BR1S1L/3C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 8 of 10

Device No: DSE-0002358 Prepared date: 15-Sep-2009 Prepared by: PAUL

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level：90%

LTPD：10%

No. Items Test Condition

Test

Hours/Cycles Sample

Size Ac/Re

1 Reflow Soldering

Temp. : 260℃±5℃

Min. 5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100℃ 15min

∫ 5 min

L : -40℃ 15min

300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5min

∫ 10 sec

L : -10℃ 5min

300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1

6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/ 85% RH 1000 Hrs. 22 PCS. 0/1

12-215/Y2C-BR1S1L/3C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 9 of 10

Device No: DSE-0002358 Prepared date: 15-Sep-2009 Prepared by: PAUL

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection , otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

12-215/Y2C-BR1S1L/3C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 10 of 10

Device No: DSE-0002358 Prepared date: 15-Sep-2009 Prepared by: PAUL

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time of

the hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether

the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com