FR series Hall effect 3-position thumb controls Distinctive features and specifications Non-contact Hall effect technology Three position, ON-OFF-ON analog output 3 million lifecycles Submersible to 1m (3.28ft) per IP68 Choice of handle color Redundant outputs available ENVIRONMENTAL MECHANICAL * * * * * * * Initial Actuation Force: 260g Nominal into position 23 360g Nominal out of position 23 * Maximum Vertical Load: 200N3 * Maximum Horizontal Load: 150N3 * Mechanical Life: 3,000,000 full forward to full back Operating Temperature: -400C to +850C (-400F to +1850F) Storage Temperature: -400C to +850C (-400F to +1850F) Sealing: Submersible to 1m per IP684 EMC Immunity Level: EN61000-4-3 EMC Emissions Level: EN61000-6-3:2001 ESD: EN61000-4-2 ELECTRICAL MATERIALS * * * * * * Handle/Actuator: Glass filled nylon * Body: Glass filled nylon * Boot: Silicone Supply Voltage Range: 5.00V 0.01V Reverse Polarity Max: 10V Overvoltage Max: 20V Return to Center Voltage Tolerance (POS2): 2.50V 0.50V Output Voltage Tolerance at Full Travel/Detent Position (POS1, POS3): 0.25V NOTE: All values are nominal. FR A Termination1 Handle SERIES 0 1 2 3 A None Castle Winged Hat Conical Handle 1, 2, 3 1 2 3 4 Output Options 22 AWG 25cm PTFE 28 AWG 25cm PTFE 2.54mm (0.100") Pitch TE Connector 2.54mm (0.100") Pitch TE Connector with wire harness None Drop-in Rear Mount Drop-in and Rear Mount 06 Operation Mounting Options N D R A 01 02 03 05 U NOTES: Single Axis 07 09 10 11 Mounting accessories. Standard hardware includes: POS1/POS2/POS3 0.25/2.5/4.75VDC 0.5/2.5/4.5VDC 1.0/2.5/4.0VDC 0.25/2.5/4.75VDC 0.25/2.5/4.75VDC 0.5/2.5/4.5VDC 0.5/2.5/4.5VDC 1.0/2.5/4.0VDC 1.0/2.5/4.0VDC 0.5/2.5/4.5VDC 4.5/2.5/0.5VDC 0.25/2.5/4.75VDC 4.75/2.5/0.25VDC 1.0/2.5/4.0VDC 4.0/2.5/1.0VDC Handle Color 1 2 3 Power Supply A B Single Independent2 - For the Drop-in option: 4 push in connectors, drop-in bezel and an O-ring. - For the Rear mount option: 4 x 1/2 FH SS Phil Screws and a rear mount bezel. 1-1 - Wires are thick, robust, and best suited for stand alone applications. 1-2 - Wires are thin and best suited for tightly constrained wire routing. 2 Only available on dual output. Not available with Termination Options 3 or 4. 3 Force applied to the top of the castle cap. 4 All options are IP68 rated, however Drop-in mounting does not prevent panel ingress. Note: The company reserves the right to change specifications without notice. APEM www.apem.com Black Red Yellow FR series Hall effect 3-position thumb controls Overview INDEX NOTCH 90 FROM DIRECTION OF TRAVEL 50 POS 2 POS 1 POS 3 20.07 .790 (0.79) 14.12 .556 (0.556) O25.27 .995 (0.995) 254.00 10in (10.00) 22AWG 22AWG HANDLE OPTIONS 1. CASTLE 2. WINGED HAT O17.17 .676 (0.676) 3. CONICAL O17.30 .681 (0.681) O18.36 .723 (0.723) 19.84 (0.781) 18.67 .735 (0.735) 20.35 .801 (0.801) NOTE: Dimensions are in mm/(inch). Note: The company reserves the right to change specifications without notice. www.apem.com APEM FR series Hall effect 3-position thumb controls Overview DROP-IN OPTION CUTOUT DIMENSIONS O2.87 (0.113) O25.65 (1.01) 4 x PUSH IN CONNECTORS 24.64 (0.97) DROP-IN BEZEL O-RING 24.64 (0.97) REAR MOUNT OPTION CUTOUT DIMENSIONS O2.87 (0.113) O25.65 (1.01) 4 x 1/2 FH SS PHIL SCREW CHAMFERED FOR #4 FLAT HEAD SCREW (4 PLACES) 24.64 (0.97) 1.00 (0.04) x 45 CHAMFER REAR MOUNT BEZEL 24.64 (0.97) NOTES: 1 The maximum panel thickness for the Rear Mount configuration is 2.032mm/(0.08in). 2 The under panel depth for the Drop-in configuration is 16.02mm/(0.631in). 3 Dimensions are in mm/(inch). WIRING SPECIFICATION * * * * * * Black: Red: Blue Blue/White Stripe: Red/White Stripe: Black/White Stripe: Ground & button common Power (5V) X axis output (alpha) X axis output (beta) Power (5V) (beta) Ground (beta) CONNECTOR TERMINATION OPTION Single output configurations feature a five position TE 3-647166-5 connector. Dual output configurations feature a seven position TE 3-647166-7 connector. A mating harness is not included, but may be specified for single output configurations at the time of order for an additional charge. The five function harness is part number 505-499. PINOUT SPECIFICATION TE 3-647166-5 Pin Pin Pin Pin Pin Pin Pin 1 2 3 4 5 6 7 Not used 5VDC X (alpha) GND Not used - - TE 3-647166-7 Not used GND X (alpha) Not used Not used 5VDC X (beta) PIN 1 PIN 1 Note: The company reserves the right to change specifications without notice. APEM www.apem.com FR_JOYST1412R1US Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Apem: FRAA1U02A1A FR2A1U09A2A FR2A1U02A2A FRAA1U09A1A