NOTES: 1. MATERIALS AND FINISHES: BODY, CLAMP NUT, WASHER, BRAID CLAMP, BUSHING & COUPLING NUT - BRASS, NICKEL PLATING CONTACT - BRASS, SILVER PLATING INSULATOR - COPOLYMER OF STRYENE GASKET - SILICONE RUBBER, RED GASKET - SYNTHETIC RUBBER RETAINING RING - BRASS 2. ELECTRICAL: A. IMPEDANCE: 50 OHM 3. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 $C TO +165 $C REV -P 5. CABLE ASSEMBLY INSTRUCTIONS: A. STRIP CABLE AS SHOWN. B. SLIDE CLAMP NUT,WASHER,GASKET & BRAID CLAMP OVER CABLE JACKET. C. COMB OUT THE BRAID AND FOLD OUT,TRIM EXCESS BRAID. D. SOLDER CABLE CENTER CONDUCTOR TO CENTER CONTACT. E. SLIDE SUB-ASSEMBLY TO THE REAR SIDE OF THE BODY AND TIGHTEN WITH PROPER SPANNER. MAKE SURE INTERFACE DIMENSIONS MEET SPEC. 6. REVISIONS THIRD ANGLE PROJ. 4. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL RF, 34500, AND DATE CODE" DESCRIPTION DATE RELEASE TO MFG. -- REDRAWN IN PRO-E & COD SHEET ADDED 11/13/14 APPR 50250 AAP -- -- 0.430 0.260 REF 0.170 CENTER CONDUCTOR SHOWS CABLE ENTRY DIMENSIONS. SCALE RECOMMENDED CABLE STRIPPING DIMENSIONS STAMP "74868 UG 603/U" ECO 0.827 REF 1.500 0.687 REF 0.041 0.260 0.248 0.260 5/8-24NEF-2A THREAD 0.260 INTERFACE PER MIL STD-348 SERIES:N PLUG 1/2" ACROSS FLATS CONTACT UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE: 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES #.015 (0,381 mm) #.005 (0,127 mm) # 1$ NOTICE - These drawings, specifications, or other data (1) are, and remain the property of Amphenol corp. (2) must be returned upon request; and (3) are confidential and not to be disclosed to any person other than those to whom they are given by Amphenol Corp. the furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is not to be regarded by implication or otherwise in any manner licensing, granting rights to permitting such holder or any other person to manufacture, use or sell any product, process or design, patented or otherwise, that may in any way be related to or disclosed by said drawings, specifications, or other data. MATERIAL SEE NOTES REFERENCE N-17 CO-71413-9354 CONFIGURATION LEVEL: In Work FINISH BRAID CLAMP GASKET DRAWN A ARUN PRABU DATE 28-Oct-14 ENGINEER K.CAPOZZI DATE 28-Oct-14 TITLE N STR PLUG FOR RG-59/U, UG 603/U CABLE APPROVED K. CAPOZZI DATE 11/13/14 SCALE: 4.0:1.0 CAD FILE DWG SIZE B SHEET WASHER Amphenol RF www.amphenolrf.com DRAWING NO. 34500 2 OF 2 REV P CLAMP NUT ITEM NO. 34500 PART NO. 34500