THIRD ANGLE PROJ.
DATEDESCRIPTIONREV
REVISIONS
ECO APPR
CAD FILE REV
DWG SIZE
UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE:
#.015 (0,381 mm) #.005 (0,127 mm)
3 PLACE DECIMAL2 PLACE DECIMAL ANGLES
# 1$
0.041 0.260 0.248 0.260
0.260
0.687 REF0.827 REF
0.170
CENTER
CONDUCTOR
0.430
0.260
REF
-- RELEASE TO MFG. -- -- --
P REDRAWN IN PRO-E & COD SHEET ADDED 11/13/14 50250 AAP
P
B
REFERENCE
N-17 CO-71413-9354
CONFIGURATION LEVEL: In Work
NOTICE - These drawings, specifications, or other data (1) are, and remain the
property of Amphenol corp. (2) must be returned upon request; and (3) are
confidential and not to be disclosed to any person other than those to whom they
are given by Amphenol Corp. the furnishing of these drawings, specifications, or
other data by Amphenol Corp., or to any other person to anyone for any purpose is
not to be regarded by implication or otherwise in any manner licensing, granting
rights to permitting such holder or any other person to manufacture, use or sell any
product, process or design, patented or otherwise, that may in any way be related to
or disclosed by said drawings, specifications, or other data.
SHEET 2 OF 2
SCALE: 4.0:1.011/13/14 K. CAPOZZI
TITLE
N STR PLUG FOR RG-59/U,
UG 603/U CABLE
DATEAPPROVED
Amphenol RF
www.amphenolrf.com
DATE
28-Oct-14
ENGINEER
K.CAPOZZI
MATERIAL
SEE NOTES
DATE
28-Oct-14
DRAWN
A ARUN PRABU
FINISH
DRAWING NO. 34500
ITEM NO. 34500
PART NO. 34500
NOTES:
1. MATERIALS AND FINISHES:
BODY, CLAMP NUT, WASHER, BRAID CLAMP,
BUSHING & COUPLING NUT - BRASS, NICKEL PLATING
CONTACT - BRASS, SILVER PLATING
INSULATOR - COPOLYMER OF STRYENE
GASKET - SILICONE RUBBER, RED
GASKET - SYNTHETIC RUBBER
RETAINING RING - BRASS
2. ELECTRICAL:
A. IMPEDANCE: 50 OHM
3. MECHANICAL:
A. DURABILITY: 500 CYCLES MIN.
B. TEMPERATURE RANGE: -65 $ C TO +165 $ C
4. PACKAGING:
A. QUANTITY: SINGLE PACK
B. MARKING: BAG TO BE MARKED
"AMPHENOL RF, 34500, AND DATE CODE"
5. CABLE ASSEMBLY INSTRUCTIONS:
A. STRIP CABLE AS SHOWN.
B. SLIDE CLAMP NUT,WASHER,GASKET & BRAID CLAMP OVER CABLE JACKET.
C. COMB OUT THE BRAID AND FOLD OUT,TRIM EXCESS BRAID.
D. SOLDER CABLE CENTER CONDUCTOR TO CENTER CONTACT.
E. SLIDE SUB-ASSEMBLY TO THE REAR SIDE OF THE BODY AND TIGHTEN WITH
PROPER SPANNER. MAKE SURE INTERFACE DIMENSIONS MEET SPEC.
6. SHOWS CABLE ENTRY DIMENSIONS.
CONTACT BRAID CLAMP GASKET WASHER CLAMP NUT
INTERFACE PER
MIL STD-348
SERIES:N PLUG
5/8-24NEF-2A
THREAD
1/2" ACROSS
FLATS
STAMP "74868 UG 603/U"
SCALE 1.500
RECOMMENDED CABLE
STRIPPING DIMENSIONS
