NC7WZ17P6_NL - Fairchild Semiconductor

August 2009

NC7WZ17 • Rev. 1.0.5

NC7WZ17 — TinyLogic

®

UHS Dual Buffer with Schmitt Trigger Inputs

NC7WZ17

TinyLogic® UHS Dual Buffer with Schmitt Trigger

Inputs

Features

 Ultra-High Speed: tPD 3.6ns (Typical) into 50pF at

5V VCC

 High Output Drive: ±24mA at 3V VCC

 Broad VCC Operating Range: 1.65V to 5.5V

 Matches Performance of LCX when Operated at

3.3V VCC

 Power Down High Impedance Inputs/Outputs

 Over-Voltage Tolerance Inputs Facilitate 5V to 3V

Translation

 Proprietary Noise/EMI Reduction Circuitry

 Ultra-Small MicroPak™ Packages

 Space-Saving SC70 Package

Description

The NC7WZ17 is a dual buffer with Schmitt trigger

inputs from Fairchild's Ultra-High Speed (UHS) Series

of TinyLogic®. The device is fabricated with advanced

CMOS technology to achieve ultra-high speed with high

output drive while maintaining low static power

dissipation over a very broad VCC operating range. The

device is specified to operate over the 1.65V to 5.5V

VCC range. The inputs and outputs are high-impedance

when VCC is 0V. Inputs tolerate voltages up to 7V

independent of VCC operating voltage. Schmitt trigger

inputs achieve typically 1V hysteresis between the

positive-and negative-going input threshold voltage at

5V.

Ordering Information

Part Number Operating

Temperature Top

Mark Eco

Status Package Packing

Method

NC7WZ17P6X -40 to +85°C Z17 RoHS 6-Lead SC70, EIAJ SC-88a,

1.25mm Wide 3000 Units on

Tape & Reel

NC7WZ17L6X -40 to +85°C A5 RoHS 6-Lead MicroPak™, 1.00mm

Wide 5000 Units on

Tape & Reel

NC7WZ17FHX -40 to +85°C A5 Green 6-Lead, MicroPak2, 1x1mm

Body, .35mm Pitch 5000 Units on

Tape & Reel

For Fairchild’s defini t i on of Eco St atus, pleas e visit: http://www.fairchildsemi.com/company/green/rohs_green.html.

NC7WZ17 • Rev. 1.0.5 2

NC7WZ17 — TinyLogic

®

UHS Dual Buffer with Schmitt Trigger Inputs

Connection Diagrams IEEC/IEC

A

1

1Y

1

A

2

Y

2

Figure 1. Logic Symbol

Pin Configurations

A1Y1

1 6

GND VCC

2 5

A2Y2

3 4

1

A

1

2

GND

3

6

5

4

A

2

Y

1

V

C

Y

2

Figure 2. SC70 (Top View) Figure 3. MicroPak (Top Through View)

AAA

Pin One

Notes:

1. AAA represents Product Code Top Mark (see ordering code).

2. Orientation of Top Mark determines Pin One location. Read the top product code mark left to right.

Pin One is the lower left pin. Figure 4. SC70 Pin 1 Orientation

Pin Definitions

Pin # SC70 Pin # MicroPak Name Description

1 1 A1 Input

2 2 GND Ground

3 3 A2 Input

4 4 Y2 Output

5 5 VCC Supply Voltage

6 6 Y1 Output

Function Table

Y = A

Inputs Output

A Y

L L

H H

H = HIGH Logic Level

L = LOW Logic Level

NC7WZ17 • Rev. 1.0.5 3

NC7WZ17 — TinyLogic

®

UHS Dual Buffer with Schmitt Trigger Inputs

Absolute Maximum Ratings

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be

operable above the recommended operating conditions and stressing the parts to these levels is not recommended.

In addition, extended exposure to stresses above the recommended operating conditions may affect device

reliability. The absolute maximum ratings are stress ratings only.

Symbol Parameter Min. Max. Unit

VCC Supply Voltage -0.5 7.0 V

VIN DC Input Voltage -0.5 7.0 V

VOUT DC Output Voltage -0.5 7.0 V

IIK DC Input Diode Current VIN < -0.5V -50 mA

IOK DC Output Diode Current VOUT < -0.5V -50 mA

IOUT DC Output Current ±50 mA

ICC or IGND DC VCC or Ground Current ±100 mA

TSTG Storage Temperature Range -65 +150 °C

TJ Junction Temperature Under Bias +150 °C

TL Junction Lead Temperature (Soldering, 10 Seconds) +260 °C

SC70-6 180

MicroPak-6 130

PD Power Dissipation at 85°C MicroPak2-6 120

mW

Human Body Model, JEDEC:JESD22-A114 4000

ESD Charge Device Model, JEDEC:JESD22-C101 2000 V

Recommended Operating Conditions(3)

The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended

operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not

recommend exceeding them or designing to Absolute Maximum Ratings.

Symbol Parameter Conditions Min. Max. Unit

Supply Voltage Operating 1.65 5.50

VCC Supply Voltage Data Retention 1.5 5.5 V

VIN Input Voltage 0 5.5 V

VOUT Output Voltage 0 VCC V

TA Operating Temperature -40 +85 °C

SC70-6 350

MicroPak-6 500

θJA Thermal Resistance MicroPak2-6 560

°C/W

Note:

3. Unused inputs must be held HIGH or LOW. They may not float.

NC7WZ17 • Rev. 1.0.5 4

NC7WZ17 — TinyLogic

®

UHS Dual Buffer with Schmitt Trigger Inputs

DC Electrical Characteristics

TA=25°C TA=-40 to 85°C

Symbol Parameter VCC (V) Conditions

Min. Typ. Max. Min. Max. Units

1.65 0.60 1.00 1.40 0.60 1.40

1.80 0.70 1.07 1.50 0.70 1.50

2.30 1.00 1.38 1.80 1.00 1.80

3.00 1.30 1.74 2.20 1.30 2.20

4.50 1.90 2.43 3.10 1.90 3.10

VP Posit i ve Threshold

Voltage

5.50 2.20 2.88 3.60 2.20 3.60

V

1.65 0.20 0.50 0.80 0.20 0.80

1.80 0.25 0.56 0.90 0.25 0.90

2.30 0.40 0.75 1.15 0.40 1.15

3.00 0.60 0.98 1.50 0.60 1.50

4.50 1.00 1.42 2.00 1.00 2.00

VN Negative Threshold

Voltage

5.50 1.20 1.68 2.30 1.20 2.30

V

1.65 0.10 0.48 0.90 0.10 0.90

1.80 0.15 0.51 1.00 0.15 1.00

2.30 0.25 0.62 1.10 0.25 1.10

3.00 0.40 0.76 1.20 0.40 1.20

4.50 0.60 1.01 1.50 0.60 1.50

VH Hysteresis Voltage

5.50 0.70 1.20 1.70 0.70 1.70

V

1.65 1.55 1.65 1.55

1.80 1.70 1.80 1.70

2.30 2.20 2.30 2.20

3.00 2.90 3.00 2.90

4.50

VIN=VIH,

IOH=-100µA

4.40 4.50 4.40

1.65 IOH=-4mA 1.29 1.52 1.29

2.30 IOH=-8mA 1.90 2.14 1.90

3.00 IOH=-16mA 2.40 2.75 2.40

3.00 IOH=-24mA 2.30 2.62 2.30

VOH HIGH Level Output

Voltage

4.50 IOH=-32mA 3.80 4.13 3.80

V

1.65 0.00 0.10 0.10

1.80 0.00 0.10 0.10

2.30 0.00 0.10 0.10

3.00 0.00 0.10 0.10

4.50

VIN=VIL,

IOL=100µA

0.00 0.10 0.10

1.65 IOL=4mA 0.08 0.24 0.24

2.30 IOL=8mA 0.10 0.30 0.30

3.00 IOL=16mA 0.16 0.40 0.40

3.00 IOL=24mA 0.24 0.55 0.55

VOL LOW Level Output

Voltage

4.50 IOL=32mA 0.25 0.55 0.55

V

IIN Input Leak age Current 0 to 5.5 VIN=5.5V, GND ±0.1 ±1.0 µA

IOFF Power Off Leakage

Current 0 VIN or VOUT=5.5V 1 10 µA

ICC Qui escent Suppl y Current 1.65 to 5.50 VIN=5.5V, GND 1 10 µA

NC7WZ17 • Rev. 1.0.5 5

NC7WZ17 — TinyLogic

®

UHS Dual Buffer with Schmitt Trigger Inputs

AC Electrical Characteristics

TA=25°C TA=-40 to

85°C

Symbol Parameter VCC (V) Conditions

Min. Typ. Max. Min. Max.

Units Figure

1.65 2.0 8.3 14.3 2.0 15.8

1.80 2.0 6.9 11.9 2.0 13.1

2.50 ± 0.20 1.5 4. 8 8.2 1.5 9.0

3.30 ± 0.30 1.0 3. 7 5.6 1.0 6.2

5.00 ± 0.50

CL=15pF,

RL=1MΩ

0.8 3.0 4.7 0.8 5.2

Figure 5

Figure 6

3.30 ± 0.30 1.5 4. 3 6.6 1.5 7.3

tPLH, tPHL Propagation Delay

5.00 ± 0.50 CL=50pF,

RL=500Ω 1.0 3.6 5.6 1.0 6.2

ns

Figure 5

Figure 6

CIN Input Capacitance 0.00 2.5 pF

3.30 10.0

CPD Power Dissipati on

Capacitance(4) 5.00 12.0 pF Figure 7

Note:

4. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating

current consumption (ICCD) at no output loading and operating at 50% duty cycle. CPD is related to ICCD dynamic

operating current by the expression: ICCD=(CPD)(VCC)(fIN)+(ICCstatic).

Input Outpu

t

V

CC

R

L

C

L

Note:

5. CL includes load and stray capacitance;

Input PRR=1.0MHz; tW=500ns

tr = 3ns

tPLH

Input

Output

tf= 3ns

VOH

90%

50% 50%

90%

10% 10%

50% 50%

tPHL

tW

VOL

VCC

GND

Figure 5. AC Test Circuit Figure 6. AC Waveforms

V

CC

A

Input

Note:

6. Input=AC Waveform; tr=tf=1.8ns; PRR=10MHz; Duty Cycle =50%.

Figure 7. ICCD Test Circuit

NC7WZ17 • Rev. 1.0.5 6

NC7WZ17 — TinyLogic

®

UHS Dual Buffer with Schmitt Trigger Inputs

Physical Dimensions

DETAIL A

SCALE: 60X

B

1.90

2.00±0.20

0.50 MIN

1.00

0.80

1.10

0.80

0.10 C

0.25

0.10

0.46

0.26

0.20

GAGE

PLANE (R0.10)

30°

0°

SEATING

PLANE

C0.10

0.00

NOTES: UNLESS OTHER W ISE SPECIFI ED

A) THIS PACKAGE CONFORMS TO EIAJ

SC-88, 1996.

B) ALL DIMENSIONS ARE IN MILLIMETERS.

C) DIMENS IONS DO NOT INCLUDE BURRS

OR MOLD FLASH.

D) DRAWING FILENAME: MKT-MAA06AREV6

2.10±0.30

0.10 AB

0.65

1.30

(0.25) 0.30

0.15

1

1.25±0.10

3

1.30 0.40 MIN

SEE DETAIL A

LAND PATTERN RECOMMENDATION

6

A

4

C

0.65 L

SYMM

PIN ONE

Figure 8. 6-Lead, SC70, EIAJ SC-88a, 1.25mm Wide

Pack age drawings are provided as a service to customers consideri ng Fai rchild components . Drawings may c hange i n any manner

without notice. P l ease note the revi sion and/or date on t he drawing and contac t a Fairchild S emiconductor represent ative to v er ify

or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically

the warranty therein, which covers Fairchild products.

Always visit Fairchild Semiconductor’ s online packaging area for the most recent package drawings:

http://www.fairchildsemi.com/packaging/.

Tape and Reel Specificat i on

Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:

http://www.fairchildsemi.com/products/analog/pdf/sc70-6_tr.pdf.

Package Designator Tape Section Cavity Number Cavity Status Cover Type Status

Leader (Start End) 125 (Typical) Empty Sealed

Carrier 3000 Filled Sealed

P6X Trailer (Hub End) 75 (Typical) Empty Sealed

NC7WZ17 • Rev. 1.0.5 7

NC7WZ17 — TinyLogic

®

UHS Dual Buffer with Schmitt Trigger Inputs

Physical Dimensions

2. DIMENSIONS ARE IN MILLIMETERS

1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD

MAC06AREVC

Notes:

3. DRAWING CONFORMS TO ASME Y14.5M-1994

TOP VIEW

RECOMMENED

LAND PATTERN

BOTTOM VIEW

1.45

1.00

A

B0.05 C

0.05 C

2X

0.55MAX

0.05 C

(0.49)

(1)

(0.75)

(0.52)

(0.30)

6X

1X

6X

PIN 1

DETAIL A

0.075 X 45

CHAMFER

0.25

0.15

0.35

0.25

0.40

0.30

0.5

(0.05)

1.0

5X

DETAIL A

PIN 1 TERMINAL

0.40

0.30

0.45

0.35

0.10

0.00

0.10 CBA

0.05 C

C0.05 C

0.05

0.00

5X

6X (0.13)

4X

6X

Figure 9. 6-Lead, MicroPak™, 1.0mm Wide

Pack age drawings are provided as a service to customers consideri ng Fai rchild components . Drawings may c hange i n any manner

without notice. P l ease note the revi sion and/or date on t he drawing and contac t a Fairchild S emiconductor represent ative to v er ify

or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically

the warranty therein, which covers Fairchild products.

Always visit Fairchild Semiconductor’ s online packaging area for the most recent package drawings:

http://www.fairchildsemi.com/packaging/.

Tape and Reel Specificat i on

Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:

http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf.

Package Designator Tape Section Cavity Number Cavity Status Cover Type Status

Leader (Start End) 125 (Typical) Empty Sealed

Carrier 5000 Filled Sealed

L6X Trailer (Hub End) 75 (Typical) Empty Sealed

NC7WZ17 • Rev. 1.0.5 8

NC7WZ17 — TinyLogic

®

UHS Dual Buffer with Schmitt Trigger Inputs

Physical Dimensions

5X

DETAIL A

Figure 10. 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch

Pack age drawings are provided as a service to customers consideri ng Fai rchild components . Drawings may c hange i n any manner

without notice. P l ease note the revi sion and/or date on t he drawing and contac t a Fairchild S emiconductor representative to verify

or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically

the warranty therein, which covers Fairchild products.

Always visit Fairchild Semiconductor’ s online packaging area for the most recent package drawings:

http://www.fairchildsemi.com/packaging/.

Tape and Reel Specificat i on

Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:

http://www.fairchildsemi.com/packaging/MicroPAK2_6L_tr.pdf.

Package Designator Tape Section Cavity Number Cavity Status Cover Type Status

Leader (Start End) 125 (Typical) Empty Sealed

Carrier 5000 Filled Sealed

FHX Trailer (Hub End) 75 (Typical) Empty Sealed

NC7WZ17 • Rev. 1.0.5 9

NC7WZ17 — TinyLogic

®

UHS Dual Buffer with Schmitt Trigger Inputs