SPICE MODEL: MURS320 MURS320 NEW PRODUCT 3.0A SURFACE MOUNT SUPER-FAST RECTIFIER Features * * * * * * Glass Passivated Die Construction Super-Fast Recovery Time For High Efficiency Low Forward Voltage Drop and High Current Capability SMC B Surge Overload Rating to 75A Peak Ideally Suited for Automated Assembly Available in Lead Free Finish/RoHS Compliant Version (Note 4) A C Mechanical Data D * * Case: SMC * * Moisture Sensitivity: Level 1 per J-STD-020C * Also Available in Lead Free Plating (Matte Tin Finish). Please see Ordering Information, Note 6, on Page 3 * * * Marking: U3D J Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 H Terminals: Solder Plated Terminal - Solderable per MIL-STD-202, Method 208 G E Dim Min Max A 5.59 6.22 B 6.60 7.11 C 2.75 3.18 D 0.15 0.31 E 7.75 8.13 G 0.10 0.20 H 0.76 1.52 J 2.00 2.62 All Dimensions in mm Polarity: Cathode Band or Cathode Notch Weight: 0.21 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Value Unit VRRM VRWM VR 200 V VR(RMS) 140 V IO 3.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) IFSM 75 A Forward Voltage VFM 0.9 V IRM 5.0 100 mA trr 25 ns Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TL = 140C @ IF = 3.0A, TJ = 25C Peak Reverse Current at Rated DC Blocking Voltage @ TJ = 25C @ TJ = 150C Reverse Recovery Time (Note 3) Typical Total Capacitance (Note 2) Typical Thermal Resistance, Junction to Terminal (Note 1) Operating and Storage Temperature Range Notes: 1. 2. 3. 4. CT 45 pF RqJT 11 C/W Tj, TSTG -55 to +150 C Unit mounted on PC board with 5.0 mm 2 (0.013 mm thick) copper pads as heat sink. Measured at 1.0MHz and applied reverse voltage of 0V DC. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 5. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS30197 Rev. 3 - 2 1 of 3 www.diodes.com MURS320 a Diodes Incorporated 10 IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE FORWARD CURRENT (A) 3 2 1 Tj = 125C Pulse Width: 300us Tj = 100C 0.5 Tj = 25C 0 0.1 25 50 75 100 125 150 175 0.6 0.4 0.2 TT, TERMINAL TEMPERATURE ( C) Fig. 1 Forward Current Derating Curve IFSM, PEAK FORWARD SURGE CURRENT (A) NEW PRODUCT 4 1 0.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 100 100 Tj = 150C Pulse width 8.3ms Single Half-Sine-Wave (JEDEC Method) 75 10 50 Tj = 100C 1 25 Tj = 25C 0.1 0 1 10 100 0.01 0 NUMBER OF CYCLES AT 60Hz Fig. 3 Surge Current Derating Curve 100 50 150 200 250 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 4 Typical Reverse Characteristics trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS30197 Rev. 3 - 2 2 of 3 www.diodes.com MURS320 Ordering Information Notes: (Note 5) Device Packaging Shipping MURS320-13 SMC 3K/Tape & Reel, 13-inch 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02007.pdf 6. For Lead Free Finish/RoHS Compliant part number, please add "-F" suffix to the part number above. Example: MURS320-13-F. DS30197 Rev. 3 - 2 3 of 3 www.diodes.com MURS320