Crimp Terminals
Ring
Page <1> 05/05/12 V1.1
www.element14.com
www.farnell.com
www.newark.com
Dimensions : Inches (Millimetres)
Specifications:
Maximum Electric Current :
Maximum Electrical Rating : 105°C 600 V
Insulation Material : Nylon
Insulation Colour : Red (22 to 16 AWG)
: Blue (16 to 14 AWG)
: Yellow (12 to 10 AWG)
Terminal Material : Copper
Double Crimp : With copper sleeve on barrel
Wire Range
AWG (mm2)Stud Size d2
Dimensions Crimping
Tool Part Number
W F L E D d1 T
22 to 16
(0.5 to 1.5)
#4 0.126
(3.2)
0.217
(5.5)
0.197
(5)
0.728
(18.5)
0.433
(11)
0.177
(4.5)
0.067
(1.7)
0.03
(0.75)
IZUMI model 34
with die index
colour : red
Or
K.S. model
KST2000B
with die index
colour : red
RNYD1-3.2
#10 0.209
(5.3)
0.315
(8)
0.276
(7)
0.858
(21.8)
0.433
(11)
0.177
(4.5)
0.067
(1.7)
0.03
(0.75) RNYD1-5
1/4 0.252
(6.4)
0.457
(11.6)
0.433
(11)
1.094
(27.8)
0.433
(11)
0.177
(4.5)
0.067
(1.7)
0.03
(0.75) RNYD1-6
5/16 0.331
(8.4)
0.457
(11.6)
0.433
(11)
1.094
(27.80)
0.433
(11)
0.177
(4.5)
0.067
(1.7)
0.03
(0.75) RNYD1-8
#4 0.126
(3.2)
0.26
(6.6)
0.189
(4.8)
0.74
(18.8)
0.433
(11)
0.205
(5.2)
0.091
(2.3)
0.031
(0.8) RNYD2-3.2
1/4 0.252
(6.4)
0.472
(12)
0.433
(11)
1.094
(27.8)
0.433
(11)
0.205
(5.2)
0.091
(2.3)
0.031
(0.8) RNYD2-6
Dimensions : Inches (Millimetres)
AWG 22 20 18 16 14 12 10
Amperes 9 12 17 18 30 35 50
Specification Table
Crimp Terminals
Ring
www.element14.com
www.farnell.com
www.newark.com
Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of
it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
Page <2> 05/05/12 V1.1
Wire Range
AWG (mm2)Stud Size d2
Dimensions Crimping
Tool Part Number
W F L E D d1 T
22 to 16
(0.5 to 1.5)
#8 0.169
(4.3)
0.315
(8)
0.276
(7)
0.858
(21.8)
0.433
(11)
0.177
(4.5)
0.067
(1.7)
0.03
(0.75)
IZUMI model 34
with die index
colour : red
Or
K.S. model
KST2000B
with die index
colour : red
RNYDL1-4
#8 0.169
(4.3)
0.335
(8.5)
0.307
(7.8)
0.898
(22.8)
0.433
(11)
0.205
(5.2)
0.091
(2.3)
0.031
(0.8) RNYDL2-4
#10 0.209
(5.3)
0.374
(9.5)
0.287
(7.3)
0.898
(22.8)
0.433
(11)
0.205
(5.2)
0.091
(2.3)
0.031
(0.8) RNYDL2-5
#6 0.146
(3.7)
0.26
(6.6)
0.248
(6.3)
0.803
(20.4)
0.433
(11)
0.177
(4.5)
0.067
(1.7)
0.03
(0.75) RNYDM1-3.7
#6 0.146
(3.7)
0.26
(6.6)
0.248
(6.3)
0.803
(20.4)
0.433
(11)
0.205
(5.2
0.091
(2.3)
0.031
(0.8) RNYDM2-3.7
#8 0.169
(4.3)
0.26
(6.6)
0.248
(6.3)
0.803
(20.4)
0.433
(11)
0.177
(4.5)
0.067
(4.5)
0.03
(0.75) RNYDS1-4
#8 0.169
(4.3)
0.26
(6.6)
0.248
(6.3)
0.803
(20.4)
0.433
(11)
0.205
(5.2)
0.091
(2.3)
0.031
(0.8) RNYDS2-4
16 to 14
(1.5 to 2.5)
5/16 0.331
(8.4)
0.472
(12)
0.433
(11)
1.094
(27.8)
0.433
(11)
0.205
(5.2)
0.091
(2.3)
0.031
(0.8)
IZUMI model 34
with die index
colour : blue
Or
K.S. model
KST2000B
with die index
colour : blue
RNYD2-8
#6 0.146
(3.7)
0.283
(7.2)
0.24
(6.1)
0.894
(22.7)
0.512
(13)
0.276
(7)
0.134
(3.4)
0.039
(1) RNYD5-3.7
#10 0.209
(5.3)
0.374
(9.5)
0.327
(8.3)
1.024
(26)
0.512
(13)
0.276
(7)
0.134
(3.4)
0.039
(1) RNYD5-5
1/4 0.252
(6.4)
0.472
(12)
0.413
(10.5)
1.161
(29.5)
0.512
(13)
0.276
(7)
0.134
(3.4)
0.039
(1) RNYD5-6
#8 0.169
(4.3)
0.283
(7.2)
0.24
(6.1)
0.894
(22.7)
0.512
(13)
0.276
(7)
0.134
(3.4)
0.039
(1) RNYDS5-4
12 to 10
(4 to 6) 5/16 0.331
(8.4)
0.591
(15)
0.524
(13.3)
1.339
(34)
0.512
(13)
0.276
(7)
0.134
(3.4)
0.039
(1)
IZUMI model 5
with die index
colour : yellow
Or
K.S. model
KST2000B
with die index
colour : yellow
RNYD5-8
Dimensions : Inches (Millimetres)
Specification Table
