LP9 ILLUMINATED PUSHBUTTONS ILLUMINATED SEALED DOME PUSHBUTTONS MOMENTARY ACTION COMMERCIAL GRADE LED ILLUMINATED & WATERTIGHT SEALED The OTTO LP9 Lighted Dome series is a quality precision switch designed for use in panels, control grips, instruments, heavy equipment and other demanding applications where attractive, rugged, lighted pushbutton switches are required. The LP9 series offers a positive tactile feedback, signaling the operator when the switch is operated with the added benefit of reliable LED illumination. The LP9 series offers four button versions; flush and raised profile with either a glossy or matte finish. It also comes with a threaded case for hex nut mounting while providing a short behind panel depth. Raised Dome Flush Dome (R) Standard Characteristics/Ratings: The LP9 series is constructed to meet IP68S watertight seal. Expect 25,000 operations at full rated load of 5 amps resistive or 3 amps inductive; 500,000 operations at 500mA/200mA resistive. ELECTRICAL RATINGS: The LP9 series are momentary snap-action double break switches, available in standard and low operate forces. The LED is available in five colors and has the ability to accommodate 2 or 12VDC. Features: N.O./N.C. Cycles Operating Force Resistive 5A 25,000 Standard Inductive 3A 25,000 Standard Resistive 500mA 500,000 Standard Resistive 200mA 500,000 Low or Standard DWV 1050Vrms Low Level 10mA @ 30mV Electrical Life: * Watertight to IP68S * LED lighted with the ability to accommodate 2 or 12VDC * LED available in five colors * Flush & raised button style * Matte & glossy button finish * Positive tactile feedback contact transfer * Withstands extreme shock & vibration * Short behind panel depth Sea Level @ 28VDC or 115VAC, 60/400Hz Load 25,000 See Rating Chart LIGHTING: Light Source Voltage (DC) Actual Voltage Nominal (DC) 2 2 2.6 12 13.5 14.5 Mechanical Life: 1,000,000 cycles Seal: IP68S Voltage Max (DC) Operating Temp Range: -55C to +85C Operating Force: 1.7 +/- 0.5 lb. (standard force) 12 +/- 4 oz (low force) Total Travel: 0.080 inches max Overtravel: 0.010 inches min MATERIALS: Case: Thermoplastic Button: Thermoplastic Terminals: Brass with gold plate over silver plate Mounting Hardware: Hex nut and lockwasher for round/threaded style case only Panel gasket for snap-in style case only LP9 PART NUMBER CODE LP9 - X X X X X X X Button Style* Case Style* Terminal Style Circuit Form Operating Force Light Source Case Color Button Color 1. 2. 3. 4. 1. Round/Threaded 2. Snap-In 1. Solder 2. PC Pin 1. N.O. 2. N.C. 3. 2 Circuit 1. Standard Snap-Action 2. Low Force Snap-Action A. 2V Red LED B. 2V Green LED C. 2V Amber LED D. 2V Blue LED E. 2V White LED F. 12V Red LED G. 12V Green LED H. 12V Amber LED J. 12V Blue LED K. 12V White LED 1. Red 2. Black 3. Orange** 4. Yellow** 5. Green** 6. Blue** 7. Violet** 8. Gray** 9. White 1. Red 2. Black 3. Orange 4. Yellow 5. Green 6. Blue 7. Violet 8. Gray 9. White Flush Raised Flush Matte Raised Matte * Button and case will be of the same texture. For all mixed gloss/matte combination options, contact factory. ** For minimum requirement, contact factory. 66 X OTTO Full Line Catalog Specifications Subject To Change Without Notice ILLUMINATED SEALED DOME PUSHBUTTONS LP9 ILLUMINATED PUSHBUTTONS MOMENTARY ACTION COMMERCIAL GRADE LED ILLUMINATED & WATERTIGHT SEALED PUSHBUTTONS Round Threaded Case Style, Flush Button Snap-In Case Style, Flush Button Standard Terminals (Terminals not oriented to flat.) Round Threaded Case Style, Raised Button Snap-In Case Style, Raised Button PC Terminals (Orientated to case flats as shown.) SOLDER LUG TERMINALS ARE NOT ORIENTED T O C A S E F L AT Specifications Subject To Change Without Notice www.ottoexcellence.com 67