1/6
www.rohm.com
○
c 2012 ROHM Co., Ltd. All rights reserved. 2012.11 - Rev.D
Thick Film Chip Resistors
MCR Series < Automotive >
Features
1) Full line up from ultra small size (01005) to 2512 with jumper type.
2) High reliability metal glazed thick film.
3) ROHM resistors have obtained ISO9001/ISO/TS16949 certification.
4) "Automotive" product is AEC-Q200 compliant.
∗Please contact us for status of AEC-Q200 on "General purpose" products.
Part No. Packing
Specification Quantity / Reel
(mm)
Type Code
Size
GENERAL PURPOSE
Paper tape
(2mm pitch)
Paper tape
(2mm pitch)
Paper tape
(4mm pitch)
Embossed tape
(1mm pitch)
Embossed tape
(4mm pitch)
0402
0603
1005
1608
2012
3216
3225
5025
6432
01005
0201
0402
0603
0805
1206
YRT
RZP
YZP 15,000
40,000
15,000
10,000
Bulk case 50,000
5,000
Paper tape
(4mm pitch) 5,000
4,000
MRT
ERT
ERT
ERT
YZP
−
−
MZP
PZPI
(*For further information on datasheet,
please refer to AUTOMOTIVE datasheet.)
MZP : Paper tape
(2mm pitch)
PZPI : Bulk case MZP : 10,000
PZPI : 25,000
MZP / PZPI
(*For further information on datasheet,
please refer to AUTOMOTIVE datasheet.)
EZP
EZP
EZP
1210 JZH
JZH
JZH
2010
2512
MCR004
MCR006
MCR01
MCR03
MCR10
MCR18
MCR25
MCR50
MCR100
(inch)
AUTOMOTIVE
∗Corresponds to
AEC−Q200
Part Number Description
06
MCR
(Micro chip resistors)
0YTR
CMR
Part No.
Resistance code, 3 or 4 digits.
000 denotes jumper type.
Ex.)
1Ω = 1R0 ( ±5% )
9.1 Ω = 9R1 ( ±5% )
10 Ω = 10R0 ( ±0.5%,±1% )
100 ( ±5% )
2.2M Ω = 2204 ( ±1% )
225 ( ±5% )
D,F
J:
:4 digits
3 digits
Resistance
tolerance Resistance
code
004 (0402 [01005])
006 (0603 [0201])
01 (1005 [0402])
03 (1608 [0603])
10 (2012 [0805])
18 (3216 [1206])
25 (3225 [1210])
50 (5025 [2010])
100 (6432 [2512])
D ( ±0.5% )
F ( ±1% )
FX ( ±1% ) ∗
Only MCR03EZP/MZP/PZPI
J ( ±5% )
(Including jumper type)
Size
(mm [inch])
Resistance Tolerance Nominal Resistance
J01 0
Type Code
2/6
www.rohm.com
○
c 2012 ROHM Co., Ltd. All rights reserved. 2012.11 - Rev.D
Data Sheet MCR series < Automotive >
Products List
Limiting Element
Voltage
(V)
Maximum
Overload
Voltage
(V)
Temperature
Coefficient
(ppm /
°C
)
Resistance
Tolerance
(%)
Operating
Temperature
Range
(
°C
)
Type Code
Resistance Range SeriesPart No.
Rated Power
(70
°C)
(W)
MCR006 YZP
MCR01 MZP
PZPI
0.05 25
Jumper type : Rmax = 50m Ω / Imax. = 0.5A
Jumper type : Rmax = 50m Ω / Imax. = 1A
Jumper type : Rmax = 50m Ω / Imax. = 1A
Jumper type : Rmax = 50m Ω / Imax. = 2A
Jumper type : Rmax = 50m Ω / Imax. = 2A
Jumper type : Rmax = 50m Ω / Imax. = 2A
Jumper type : Rmax = 50m Ω / Imax. = 3A
Jumper type : Rmax = 50m Ω / Imax. = 4A
∗Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product
before using or ordering it.
50
50
150
200
200 400
400
200
300
100
−
−
0.063
EZP
MZP
PZPI
EZP
EZP
JZH
JZH
MCR03
MCR10
MCR18
MCR25
MCR100
0.1
0.1
0.125
0.25
1
±400 J(±5%)
FX(±1%)
D(±0.5%)
J(±5%)
F(±1%)
J(±5%)
J(±5%)
F(±1%)
F(±1%)
−55 to +125
−55 to +155
−55 to +125
D(±0.5%)
±100
±50
±100
±200 1.0Ω to 9.1Ω
10Ω to 10MΩ
100Ω to 1MΩ
10Ω to 91Ω
10Ω to 10MΩE24
E24,E96
E24
E24,E96
E24
E24,E96
E24
E24,E96
1.0Ω to 2.0Ω
2.2Ω to 5.1Ω
5.6Ω to 3.3MΩ
500±350
±500
±200
+600 / −200 J(±5%)
F(±1%)
D(±0.5%)
±250
±100
±200
±250 1.0Ω to 9.1Ω
10Ω to 10MΩ
1kΩ to 1MΩ
10Ω to 910Ω
10Ω to 10MΩE24
+500 / −250 J(±5%)
F(±1%)
D(±0.5%)
±100
±50
±100
±200 1.0Ω to 9.1Ω
10Ω to 2.2MΩ
100Ω to 1MΩ
10Ω to 91Ω
10Ω to 10MΩE24
E24,E96
E24
500±350
±350
±100
±200
±500 1.0Ω to 2.0Ω
10Ω to 22Ω
10Ω to 82kΩ
24Ω to 100kΩ
2.2Ω to 9.1Ω
200 400
JZHMCR50 0.5
J(±5%)
F(±1%)
E24
E24,E96
500±350
±200
±100
±350
±500 1.0Ω to 2.0Ω
10Ω to 330kΩ
10Ω to 180kΩ
360kΩ to 560kΩ
2.2Ω to 9.1Ω
±400
±100
±50
±100
±200 1.0Ω to 9.1Ω
10Ω to 2.2MΩ
100Ω to 1MΩ
10Ω to 91Ω
10Ω to 10MΩ
200 400
0.125
0.25
J(±5%)
F(±1%)
D(±0.5%)
E24
E24,E96
±400
±100
±50
±100
±200 1.0Ω to 9.1Ω
10Ω to 2.2MΩ
100Ω to 1MΩ
10Ω to 91Ω
10Ω to 10MΩ
10Ω to 1MΩ±100
3/6
www.rohm.com
○
c 2012 ROHM Co., Ltd. All rights reserved. 2012.11 - Rev.D
Data Sheet MCR series < Automotive >
Chip Resistor Dimensions and Markings
<Marking method>
There are three or four digits used for the calculation number
according to IEC code and “R”is used for the decimal point.
Part No. Type Code (mm) (inch) L W t a b Marking
existence
(Unit : mm)
MCR006 YZP 0603 0201 0.6±0.03 0.3±0.03 0.23±0.03 0.1±0.05 0.15±0.05 No
MCR01 MZP
PZPI 1005 0402 1.0±0.05 0.5±0.05 0.35±0.05 0.2±0.1 No
MCR03 EZP
MZP
PZPI 1608 0603 1.6±0.1 0.8±0.1 0.45±0.1 0.3±0.2 0.3±0.2 Yes ∗
MCR10 EZP 2012 0805 2.0±0.1 1.25±0.1 0.55±0.1 0.4±0.2 0.4±0.2 Yes
MCR18 EZP 3216 1206 3.2±0.15 1.6±0.15 0.55±0.1 0.5±0.25 0.5±0.25 Yes
MCR25 JZH 3225 1210 3.2±0.15 2.5±0.15 0.55±0.15 0.5±0.25 0.5±0.25 Yes
MCR50 JZH 5025 2010 5.0±0.15 2.5±0.15 0.55±0.15 0.6±0.25 0.6±0.25 Yes
MCR100 JZH 6432 2512 6.3±0.15 3.2±0.15 0.55±0.15 0.6±0.25 0.6±0.25 Yes
0.25
+0.05
−0.1
Marking method of jumper type
Jumper type
MCR006 / 01 / 25 / 50 / 100
MCR03 / 10 / 18
No
Yes
Marking existence
Marking method of MCR03
For MCR03 series resistors, the printing process restricts the marking to three digits/characters.
Consequently, 1% tolerance resistors with values from the E24 series will be marked the same as
5% resistors with the same value, but 1% tolerance resistors with values from the E96 series will not be marked.
Examples:
MCR03EZPJ243 (5% tolerance, E24 / 24 k ) Marking = 243
MCR03EZPFX2402 (1% tolerance, E24 / 24 k ) Marking = 243
MCR03EZPFX2432 (1% tolerance, E96 / 24.3 k ) No Marking
MCR18EZPJ243 (5% tolerance, E24 / 24 k ) Marking = 243
MCR18EZPF2402 (1% tolerance, E24 / 24 k ) Marking = 2402
MCR18EZPF2432 (1% tolerance, E96 / 24.3 k ) Marking = 2432
Land pattern Example
B
D
A
Land
C
Dimensions
Part No.
Type Code A
MCR006
MCR01
MCR03
MCR10
MCR18
MCR25
MCR50
MCR100
YZP
MZP
PZPI
EZP
MZP
PZPI
EZP
EZP
JZH
JZH
JZH
0.3
0.5
1.0
1.2
2.2
2.2
3.8
5.1
B
0.84
1.3
2.0
2.6
4.0
4.0
6.0
8.1
C
0.3
0.5
0.8
1.15
1.5
2.3
2.3
3.0
D
0.27
0.4
0.5
0.7
0.9
0.9
1.1
1.5
(Unit : mm)
bbb
103
LL
WW
tt
a
aa
MCR004 / 006 / 01 / 03 MCR10 / 18 / 25 / 50 / 100
4/6
www.rohm.com
○
c 2012 ROHM Co., Ltd. All rights reserved. 2012.11 - Rev.D
Data Sheet MCR series < Automotive >
Derating Curve
When the ambient temperature exceeds 70°C, power dissipation must be adjusted according to the derating curves below.
0
20
40
60
80
100
−55 0 70 100 125
AMBIENT TEMPERATURE (°C)
PERCENT RATED POWER (%)
MCR006 / 100
Characteristics
Test Items Test Conditions
Resistor Type
Guaranteed Value
Jumper Type
Resistance
Variation of resistance
with temperature
Solderability
Damp heat, steady state
Endurance at 70°C
Endurance
Rapid change of
temperature
Bend strength of
the end face plating
Resistance to solvent
Resistance to
soldering heat
Overload ± (2.0%+0.1Ω) Max. 50mΩ
± (1.0%+0.05Ω)
± (3.0%+0.1Ω)
Max. 50mΩ
Max. 100mΩ
See "Products List"
See "Products List"
20
°C
No remarkable abnormality on the appearance.
A new uniform coating of minimum of
95% of the surface being immersed
and no soldering damage.
Without mechanical damage such as breaks.
Compliance Standard(s) : IEC60115−
8
JISC 5201−
8
Measurement : +20 / −55 / +20 / +125°C
Soldering condition : 260±5
°C
Duration of immersion : 10±1s
40°C, 93%RH (Relative Humidity)
Test time : 1,000h to 1,048h
± (3.0%+0.1Ω)
± (3.0%+0.1Ω)
± (1.0%+0.05Ω)
± (1.0%+0.05Ω)
± (1.0%+0.05Ω)
Max. 100mΩ
Max. 100mΩ
Max. 50mΩ
Max. 50mΩ
Max. 50mΩ
70°C
Rated voltage (current)
1.5h : ON − 0.5h : OFF
Test time : 1,000h to 1,048h
125°C (MCR006 / 25 / 50 / 100)
155°C (MCR01 / 03 / 10 / 18)
Test time : 1,000h to 1,048h
23±5
°C
, Immersion cleaning, 5±0.5min
Solvent : 2−propanol
−
Test temp.
−55
°C
to +125
°C
100cycle (MCR006 / 01 / 03)
−55
°C
to +125
°C
5cycle (MCR10 / 18 / 25 / 50 / 100)
Rosin·Ethanol : 25% (Weight)
Soldering condition : 235±5
°C
Duration of immersion : 2.0±0.5s
Rated voltage (current) ×2.5, 2s.
Maximum overload voltage
Chip weight (typical value)
Parameter Unit MCR006
YZP MCR01
MZP / PZPI MCR03
EZP / MZP / PZPI MCR10
EZP MCR18
EZP MCR25
JZH MCR50
JZH MCR100
JZH
mg/pc 0.157 0.70 2.12 5.03 9.46 16.5 25.8 42.0Weight
MCR01 / 03 / 10 / 18 / 25 / 50
0
20
40
60
80
100
−55 0 70 100 155
AMBIENT TEMPERATURE (°C)
PERCENT RATED POWER (%)
5/6
www.rohm.com
○
c 2012 ROHM Co., Ltd. All rights reserved. 2012.11 - Rev.D
Data Sheet MCR series < Automotive >
Tape Dimensions
Paper Tape
Embossed Tape
Paper Tape (Narrow pitch taping)
A
0
P
1
P
0
P
2
B
0
F
W
T
2
E
φD0
P
0
P
2
P
1
E
FW
T
2
φD
0
A
0
B
0
B
ase paper
(Bottom tape)
Components Cavity
Top tape
0.38±0.03 0.68±0.03
0.7±0.1 1.2±0.1
1.1±0.1 1.9±0.1
(Unit : mm
)
WType CodePart No. F E A
0
B
0
8.0±0.2MCR006 YZP 3.5±0.05 1.75±0.1
8.0±0.3MCR01 MZP 3.5±0.05 1.75±0.1
8.0±0.3MCR03 EZP 3.5±0.05 1.75±0.1
8.0±0.3MCR10 EZP 3.5±0.05 1.75±0.1
8.0±0.3MCR18 EZP 3.5±0.05 1.75±0.1
φ1.5 +0.1
0
1.65 +0.2
−0.1 2.4 +0.2
−0.1
3.5 +0.15
−0.05
1.95 +0.1
−0.05
φ1.5 +0.1
0
φ1.5 +0.1
0
φ1.5 +0.1
0
φ1.5 +0.1
0
2.0±0.05 Max 0.5
2.0±0.05
2.0±0.05
2.0±0.05
2.0±0.05
Max 1.1
Max 1.1
Max 1.1
Max 1.1
D
0
Type CodePart No. P
0
P
1
P
2
T
2
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
MCR006 YZP 2.0±0.05
MCR01 MZP 2.0±0.05
MCR03 EZP 4.0±0.1
MCR10 EZP 4.0±0.1
MCR18 EZP
MZP
4.0±0.1
3.0±0.1 3.5±0.1
3.4±0.2 5.6±0.2
3.5±0.2 6.7±0.2
(Unit : mm
)
WType CodePart No. F E A
0
B
0
8.0±0.3MCR25 JZH 3.5±0.05 1.75±0.1
12±0.3MCR50 JZH 5.5±0.05 1.75±0.1
12±0.3MCR100 JZH 5.5±0.05 1.75±0.1
φ1.5 +0.1
0
φ1.5 +0.1
0
φ1.5 +0.1
0
2.0±0.05 Max 1.1
2.0±0.05
2.0±0.05
Max 1.1
Max 1.1
D
0
Type CodePart No. P
0
P
1
P
2
T
2
4.0±0.1
4.0±0.1
4.0±0.1
MCR25 JZH 4.0±0.1
MCR50 JZH 4.0±0.1
MCR100 JZH 4.0±0.1
P0
P2
E
FW
φD
0
A
0
B
0
B
ase paper
(Bottom tape)
Components Cavity
Top tape
P
1
T
2
1.1±0.1 1.9±0.1
(Unit : mm
)
WFEA
0
B
0
D
0
P
0
P
1
P
2
T
2
8.0±0.3
MCR03
3.5±0.05 1.75±0.1
2.0±0.05 Max 1.14.0±0.1 2.0±0.5
φ1.5 +0.1
0
Type CodePart No.
6/6
www.rohm.com
○
c 2012 ROHM Co., Ltd. All rights reserved. 2012.11 - Rev.D
Data Sheet MCR series < Automotive >
Reel Dimensions
0 2
0 4
0 6
0 8
0 2
0 4
0 6
0 8
C
ABD
Label
ACCORDING EIAJ ET-7200B
AType CodePart No. B C D
(Unit : mm
)
φ13±0.2
φ180 0
−1.5 φ60 +1.0
0
MCR006 YZP
MCR01 MZP
MCR03 EZP
MZP
MCR10 EZP
MCR18 EZP
MCR25 JZH
MCR50 JZH
MCR100 JZH
9 +1.0
0
13 +1.0
0
Bulk case Dimensions
110±0.7
12.0±0.1
(Unit : mm)
Slider
Shutter
EIAJ ET-7200B compliant
36 0
−0.2
MCR01PZPI
MCR03PZPI
R1120A
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
Notice
ROHM Customer Support System
http://www.rohm.com/contact/
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specied herein is subject to change for improvement without notice.
The content specied herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specied in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specied herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specied in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, ofce-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specied in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, re or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, re control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specied herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
