GT15 Thermal Conductivity Glassfiber Reinforcement Features Smooth surface & low thermal contact resistance Exceptional thermal performance at lower application pressures (20psi~400psi) Usable over a wide temperture range Electrically isolating Complies with UL standards Properties Property GT15 Unit Test Method Colour Yellow - Visual Reinforcement Fiberglass - - Thickness 0.23 (mm) - Op. Temp. Range -45 to 180 C - Density 2.35 g/cm Thermal Conductivity 1.5 W/mK ASTM D5470 Hardness 75 Shore A ASTM D2240 3 ASTM D792 Breakdown Voltage AC 4000 V ASTM D149 Breakdown Voltage DC 6000 V ASTM D149 Dielectric Constant 5.8 1000 Hz ASTM D150 Thermal Impedance t=0.23mm C in 2/W 20psi 0.70 psi ASTM D5470 t=0.23mm 50psi 0.61 psi ASTM D5470 t=0.23mm 100psi 0.49 psi ASTM D5470 t=0.23mm 200psi 0.43 psi ASTM D5470 t=0.23mm 400psi 0.40 psi ASTM D5470 TML 0.2 % % ASTM E595 Tensile Strength 200 psi ASTM D412 Elongation 60 % ASTM D412 UL Flammability V-0 - UL 94 Limited Warranty High Thermal Conductivity Glassfiber Reinforcement is guaranteed against detachment, under normal use, for 5 years from the purchase date. User shall be solely responsible for determining the suitability of TIM for the intended use, and the user assumes all risks and liabilities whatsoever in connection there with. Neither seller nor manufacturer shall be liable either in tort or in contract for any loss damage, including loss of profits or revenue arising out of the use or the inability to use a product. Tel: +44 20 8133 2062 Email: sales@tglobaltechnology.com Web: www.tglobaltechnology.com Skype: tglobal.technology