DISCRETE CERAMICS DATA SHEET NP0 and X7R size 0201 Surface mount ceramic multilayer capacitors Product specification Supersedes data of 5th June 2000 File under Discrete Ceramics, ACM2 2000 Jul 07 Philips Components Product specification Surface mount ceramic multilayer capacitors FEATURES NP0 and X7R size 0201 QUICK REFERENCE DATA * High capacitance per unit volume * Supplied in bulk case or in tape on reel. APPLICATIONS DESCRIPTION VALUE Rated voltage UR (DC): NP0 dielectric 50 V X7R dielectric 16 V, 25 V and 50 V Capacitance range (E12 series): * Mobile phones NP0 (CG) 0.47 pF to 22 pF * Digital cameras X7R (2R1) 39 pF to 3.3 nF * Camcorders Tolerance on capacitance at Tamb = 20 C: * Tuners. NP0 (CG): C < 5 pF 0.25 pF DESCRIPTION 5 pF C < 10 pF 0.50 pF, 0.25 pF The capacitor consists of a rectangular block of ceramic dielectric in which a number of interleaved precious metal electrodes are contained. This structure gives rise to a high capacitance per unit volume. C 10 pF 5%, 2% The inner electrodes are connected to the two terminations, silver dipped with a barrier layer of plated nickel and finally covered with a layer of plated tin (NiSn). A cross section of the structure is shown in Fig.1. 10%, 5% X7R (2R1) Test voltage (DC) for 1 minute 2.5 x UR Sectional specifications IEC 60384-10, second edition 1989-04; also based on CECC 32 100 Detailed specification based on CECC 32 101-801 Climatic category (IEC 60068) 55/125/56 terminations , , , electrodes MLB457 ceramic material Fig.1 Construction of a ceramic multilayer capacitor. 2000 Jul 07 2 Philips Components Product specification Surface mount ceramic multilayer capacitors NP0 and X7R size 0201 MECHANICAL DATA W T L4 L2 L3 MBB211 L1 For dimensions see Table 1. Fig.2 Component outline. Physical dimensions Table 1 Capacitor dimensions W T L2 and L3 L4 MIN. 0.6 0.03 0.3 0.03 0.3 0.03 0.15 0.05 0.20 0.024 0.001 0.012 0.001 0.012 0.001 0.006 0.002 0.008 CASE SIZE L1 Dimensions in millimetres 0201 Dimensions in inches 0201 2000 Jul 07 3 Philips Components Product specification Surface mount ceramic multilayer capacitors NP0 50 V size 0201 SELECTION CHART FOR NP0 50 V C (pF) LAST THREE DIGITS OF 12NC 0.47 477 0.56 567 0.68 687 0.82 827 1.0 108 1.2 128 1.5 158 1.8 188 2.2 228 2.7 278 3.3 338 3.9 398 4.7 478 5.6 568 6.8 688 8.2 NP0 50 V 0201 0.3 0.03 828 10 109 12 129 15 159 18 189 22 229 Thickness classification and packaging quantities THICKNESS CLASSIFICATION (mm) 0.3 0.03 2000 Jul 07 8 mm TAPE WIDTH AMOUNT PER REEL AMOUNT PER BULK CASE 180 mm; 7" 330 mm; 13" PAPER PAPER 0201 15000 t.b.d. t.b.d. 4 Philips Components Product specification Surface mount ceramic multilayer capacitors NP0 50 V size 0201 ORDERING INFORMATION FOR NP0 50 V Components may be ordered by using either a simple 15-digit clear text code or Philips unique 12NC. Clear text code EXAMPLE: 0201CG478J9B200 SIZE CODE 0201 TEMP. CHAR. CG = NP0 CAPACITANCE TOL. VOLTAGE TERMINATION 9 = 50 V B = NiSn PACKAGING 478 = 0.47 pF; G = 2% the third digit J = 5% 3 = 330 mm; 13" paper signifies the C = 0.25 pF P = bulk case multiplying factor: D = 0.5 pF 0=x1 2 = 180 mm; 7" paper MARKING 0 = no marking 9 = x 0.1 8 = x 0.01 Ordering code 12NC handbook, full pagewidth 2 2 X X 8 6 X X X X X X Capacitance value(1) Carrier type 38 paper 54 bulk Size - Termination 8 0201 NiSn Packaging 1 reel: 180 mm 7 reel: 330 mm 4 bulk case CCB808 (1) Refer to chapter "Selection chart for NP0 50 V". 2000 Jul 07 5 Tolerance 4 2% for C 10 pF 0.25 pF for C < 10 pF 5 5% for C 10 pF 0.5 pF for 5 pF < C < 10 pF 0.25 pF for C < 5 pF SERIES 0 = conv. ceramic Philips Components Product specification Surface mount ceramic multilayer capacitors NP0 50 V size 0201 ELECTRICAL CHARACTERISTICS Class 1 capacitors; NP0 dielectric; NiSn terminations Unless otherwise stated all electrical values apply at an ambient temperature of 20 1 C, an atmospheric pressure of 86 to 106 kPa, and a relative humidity of 63 to 67%. DESCRIPTION VALUE Capacitance range (E12 series) 0.47 pF to 22 pF Tolerance on capacitance at Tamb = 20 C: C < 5 pF 0.25 pF 5 pF C < 10 pF 0.50 pF, 0.25 pF C 10 pF 5%, 2% Tan : C < 10 pF -4 -4 3 10 ------ + 0.7 x 10 or 30 x 10 , whichever is smallest C C 10 pF 10 x 10-4 Insulation resistance after 1 minute at UR (DC) Rins > 100 G Temperature coefficient (0 30) x 10-6/K 2000 Jul 07 6 Philips Components Product specification Surface mount ceramic multilayer capacitors NP0 50 V size 0201 CCB107 10 CCB108 0.5 C C (%) C C (%) 5 0 0 -5 -10 -0.5 0 10 Fig.3 20 30 40 50 VDC (V) Typical capacitance change with respect to the capacitance at 1 V as a function of DC voltage. Fig.4 CCB109 5 tan (x 10-4) 4 3 2 1 0 -40 0 40 80 120 T (oC) Fig.5 Typical tan as a function of temperature. 2000 Jul 07 -40 7 0 40 80 120 T (oC) Typical capacitance change as a function of temperature. Philips Components Product specification Surface mount ceramic multilayer capacitors X7R 16 V and 25 V size 0201 SELECTION CHART FOR X7R 16/25 V C (pF) LAST TWO DIGITS OF 12NC 560 19 680 21 820 22 1000 23 1200 24 1500 25 1800 26 2200 27 2700 28 3300 29 X7R 25 V X7R 16 V 0201 0.3 0.03 0.3 0.03 Thickness classification and packaging quantities THICKNESS CLASSIFICATION (mm) 0.3 0.03 2000 Jul 07 8 mm TAPE WIDTH AMOUNT PER REEL AMOUNT PER BULK CASE 180 mm; 7" 330 mm; 13" PAPER PAPER 0201 15000 t.b.d. t.b.d. 8 Philips Components Product specification Surface mount ceramic multilayer capacitors X7R 16 V and 25 V size 0201 ORDERING INFORMATION FOR X7R 16/25 V Components may be ordered by using either a simple 15-digit clear text code or Philips unique 12NC. Clear text code EXAMPLE: 02012R102J7B200 SIZE CODE 0201 TEMP. CHAR. 2R = X7R CAPACITANCE TOL. VOLTAGE TERMINATION B = NiSn 102 = 1000 pF; J = 5% 7 = 16 V the third digit K = 10% 8 = 25 V PACKAGING 2 = 180 mm; 7" paper MARKING 0 = no marking 3 = 330 mm; 13" paper signifies the P = bulk case multiplying factor: 1 = x 10 2 = x 100 Ordering code 12NC handbook, full pagewidth 2 2 X X X X X X 5 X X X Capacitance value(1) Carrier type 38 paper 54 bulk Tolerance 5 5% 6 10% Rated voltage - Termination 78 16 V; NiSn 91 25 V; NiSn Size 8 0201 CCB809 (1) Refer to chapter "Selection chart for X7R 16/25 V". 2000 Jul 07 9 Packaging 1 reel: 180 mm; 7" 5 reel: 330 mm; 13" 4 bulk case SERIES 0 = conv. ceramic Philips Components Product specification Surface mount ceramic multilayer capacitors X7R 50 V size 0201 SELECTION CHART FOR X7R 50 V LAST TWO DIGITS OF 12NC C (pF) 39 04 47 05 56 06 68 07 82 08 100 09 120 11 150 12 180 13 220 14 270 15 330 16 390 17 470 18 X7R 50 V 0201 0.3 0.03 Thickness classification and packaging quantities THICKNESS CLASSIFICATION (mm) 0.3 0.03 2000 Jul 07 8 mm TAPE WIDTH AMOUNT PER REEL AMOUNT PER BULK CASE 180 mm; 7" 330 mm; 13" PAPER PAPER 0201 15000 t.b.d. t.b.d. 10 Philips Components Product specification Surface mount ceramic multilayer capacitors X7R 50 V size 0201 ORDERING INFORMATION FOR X7R 50 V Components may be ordered by using either a simple 15-digit clear text code or Philips unique 12NC. Clear text code EXAMPLE: 02012R101J9B200 SIZE CODE 0201 TEMP. CHAR. 2R = X7R CAPACITANCE TOL. 101 = 100 pF; J = 5% the third digit K = 10% VOLTAGE TERMINATION 9 = 50 V B = NiSn PACKAGING 2 = 180 mm; 7" paper MARKING 0 = no marking 3 = 330 mm; 13" paper signifies the P = bulk case multiplying factor: 0=x1 1 = x 10 Ordering code 12NC handbook, full pagewidth 2 2 X X 5 8 X Carrier type 38 paper 54 bulk Capacitance value(1) Size - Termination 8 0201 NiSn Tolerance 5 5% 6 10% Packaging 1 reel: 180 mm 5 reel: 330 mm 4 bulk case CCB807 (1) Refer to Chapter "Selection chart for X7R 50 V". 2000 Jul 07 X 5 X X X 11 SERIES 0 = conv. ceramic Philips Components Product specification Surface mount ceramic multilayer capacitors X7R 16 V, 25 V and 50 V size 0201 ELECTRICAL CHARACTERISTICS Class 2 capacitors; X7R dielectric; NiSn terminations Unless otherwise stated all electrical values apply at an ambient temperature of 20 1 C, an atmospheric pressure of 86 to 106 kPa, and a relative humidity of 63 to 67%. DESCRIPTION VALUE Capacitance range (E12 series) 39 pF to 3.3 nF Tolerance on capacitance after 1000 hours 20%, 5% Tan : 50 V and 25 V 250 x 10-4 16 V 350 x 10-4 Insulation resistance after 1 minute at UR (DC) Rins > 100 G Test voltage (DC) for 1 minute 2.5 x UR Ageing typical 1.5% 2000 Jul 07 12 Philips Components Product specification Surface mount ceramic multilayer capacitors X7R 16 V, 25 V and 50 V size 0201 CCC343 handboo, halfpage C C (%) CCA489 handbook, halfpage 600 15 tan (x 10-4) 10 400 5 1 0 1 2 2 -5 200 3 -10 -15 0 -50 0 50 100 150 T (C) Curve 1 = 16 V product. Curve 2 = 25 V and 50 V products. Fig.6 2 3 -20 -30 -40 0 10 20 30 40 50 VDC (V) Curve 1 = 16 V product. Curve 2 = 25 V product. Curve 3 = 50 V product. Fig.8 2000 Jul 07 40 80 120 T (C) Fig.7 Typical tan as a function of temperature. CCC344 0 C C (%) -10 -50 0 Curve 1 = 16 V product. Curve 2 = 25 V product. Curve 3 = 50 V product. Typical capacitance change as a function of temperature. 1 -40 Typical capacitance change with respect to the capacitance at 1 V as a function of DC voltage at 20 C. 13 Philips Components Product specification Surface mount ceramic multilayer capacitors NP0 and X7R size 0201 PACKAGING P0 handbook, full pagewidth D0 T P2 E F cover tape W B0 MBG251 A0 P1 For dimensions see Table 2. Fig.9 Paper tape. Table 2 Dimensions of paper tape for relevant product size; see Fig.9 PRODUCT SIZE CODE 0201 SYMBOL UNIT SIZE TOL. A0 0.37 0.03 mm B0 0.67 0.03 mm W 8.0 0.2 mm E 1.75 0.1 mm F 3.5 0.05 mm D0 1.5 +0.1/-0 mm P0; note 1 4 0.1 mm P1 2 0.05 mm P2 2 0.05 mm Tmax 0.37 0.02 mm Note 1. P0 pitch tolerance over any 10 pitches is 0.2 mm. 2000 Jul 07 14 Philips Components Product specification , ,, z y |, , y { ,, , |{ z Surface mount ceramic multilayer capacitors NP0 and X7R size 0201 DIMENSIONS OF SOLDER LANDS D E C B A F E = available track area under the CMC. G preferred direction during wave soldering solder land / solder paste pattern solder resist pattern | occupied area tracks CCA045 Fig.10 Recommended dimensions of solder lands. Table 3 Reflow soldering; for dimensions also see Fig.10 FOOTPRINT DIMENSIONS (mm) SIZE CODE 0201 A B C D E F G 0.65 0.23 0.21 0.30 N/A 0.90 0.60 2000 Jul 07 15 PROCESSING REMARKS PLACEMENT ACCURACY (mm) IR or hot plate soldering t.b.d.