303 3 2
Esp e r anza , Ra n c h o San t a M a r g a r i t a , Calif o r ni a
926 8 8
t e l 949-546-800 0 | f a x 949-546-80 0 1 | w w w . a b r a c on.c o m
Revised: 08.09.11
Visit
www.abracon.com
for Terms & Conditions of Sale
CERTIFIED
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
||||| | | | | | | | | | |
ASEMDHC
Pb
RoHS
Compliant
LOW JITTER PIN CONFIGURABLE DUAL HCSL OUTPUT
3.2 x 2.5 x 0.85 mm
ULTRA MINIATURE PURE SILICONTM CLOCK OSCILLATOR
Life S iz e
ASEMDHC
APPLICATIONS:
FEATURES:
STANDARD SPECIFICATIONS:
Pre-programmed Output Frequency Configuration
Key Electrical Specifications
.
Ordering Info Freq
(MHz)
Freq Select Bits [FS2, FS1, FS0] – Default is [111]
000 001 010 011 100 101 110 111
Frequency
Configuration 1
fOUT1 106.25 100 125 100 156.25 156.25 125 156.25
fOUT2 25 100 50 50 25 125 25 156.25
fOUT1 Contact Abracon for customized configurations
Frequency select bits [FS2, FS1, FS0] are weakly tied high so if left floated, the default setting will be [111] and the device will output the
associated frequency highlighted in Bold. If other frequency combinations are required, please contact Abracon for customized configuration.
Please see the configurable frequency range in the section 2.0
*1. Frequency stability includes frequency variations due to initial tolerance, temp. and power supply voltage
Configurable frequency range 10 ----- 460 MHz Commercial,
Industrial temp range
Overall Frequency Stability*1
Tri-state Function (Standby/Disable)
"1" (VIH≥0.75*Vdd) or Open: Oscillation
"0" (VIL<0.25*Vdd) : Hi Z
V
40kΩ pull-up resistor
embedded
Supply Current (Idd) ----- 60 ----- mA
F01=F02=156.25MHz
Output Offset Voltage
V RL=50 Ω
Peak to Peak Output Swing
20%/80%*VDD
• Consumer Electronics
• Storage Area Networks
• SATA, SAS, Fibre Channel
• Passive Optical Networks
• EPON, 10G-EPON, GPON, 10G-PON
• Ethernet
• 1G, 10GBASE-T/KR/LR/SR, and FCoE
• HD/SD/SDI Video & Surveillance
• PCI Express
• Ultra Miniature Pure Silicon
• Pin Configurable Dual HCSL output
• Low Jitter (Period Jitter RMS 3ps typical)
• Low Integrated Phase Jitter 2ps max
• Tight Stability +/-10ppm -40 to +85C
• Excellent Shock & Vibration Immunity
Low Jitter
Pin Configurable
Dual HCSL Output
3G MEMS
Moisture Sensitivity Level – MSL 1