MRLM124A-X-RH REV 2A0 MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS: POST RADIATION LIMITS +25 C (See NOTE 3)
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
Vio Input Offset
Voltage Vcc+ = 30V, Vcc- = Gnd, Vcm = -15V 3 -2.2 2.2 mV 1
Vcc+ = 2V, Vcc- = -28V, Vcm = -13V 3 -2.2 2.2 mV 1
Vcc+ = 5V, Vcc- = GND, Vcm = -1.4V 3 -2.2 2.2 mV 1
Vcc+ = 2.5V, Vcc- = -2.5, Vcm = -1.1V 3 -2.2 2.2 mV 1
Iio Input Offset
Current Vcc+ = 30V, Vcc- = GND, Vcm = -15V 3 -15 15 nA 1
Vcc+ = 2V, Vcc- = -28V, Vcm = 13V 3 -15 15 nA 1
Vcc+ = 5V, Vcc- = GND, Vcm = 1.4V 3 -15 15 nA 1
Vcc+ = 2.5V, Vcc- = -2.5V, Vcm = 1.1V 3 -15 15 nA 1
+Iib Input Bias
Current Vcc+ = 30V, Vcc- = GND, Vcm = -15V 3 -75 +0.1 nA 1
Vcc+ = 2V, Vcc- = -28V, Vcm = 13V 3 -75 +0.1 nA 1
Vcc+ = 5V, Vcc- = GND, Vcm = -1.4V 3 -75 +0.1 nA 1
Vcc+ = 2.5V, Vcc- = -2.5V, Vcm = -1.1V 3 -75 +0.1 nA 1
-Iib Input Bias
Current Vcc+ = 30V, Vcc- = GND, Vcm = -15V 3 -75 +0.1 nA 1
Vcc+ = 2V, Vcc- = -28V, Vcm = 13V 3 -75 +0.1 nA 1
Vcc+ = 5V, Vcc- = GND, Vcm = -1.4V 3 -75 +0.1 nA 1
Vcc+ = 2.5V, Vcc- = -2.5V, Vcm = 1.1V 3 -75 +0.1 nA 1
Avs+ Voltage Gain Vcc+ = 30V, Vcc- = GND, 1V < Vo < 26V,
Rl = 10K Ohms 3 40 V/mV 4
Vcc+ = 30V, Vcc- = GND, 5V < Vo < 20V,
Rl = 2K Ohms 3 40 V/mV 4
Note 1: Calculated parameters.
Note 2: Test on A360/J273 or bench test.
Note 3: Pre and post irradiation limits are identical to those listed under AC and DC
electrical characteristics except as listed in the Post Radiation Limits Table.
These parts may be dose rate sensitive in a space environment and demonstrate
enhanced low dose rate effect. Radiation end point limits for the noted parameters
are guaranteed only for the conditions as specified in MIL-STD-883, Method 1019.5
9