SPECIFICATION * Supplier : Samsung electro-mechanics (Reference sheet) CL32A106KOTLNNE * Samsung P/N : * Description : * Product : Multi-layer Ceramic Capacitor CAP, 10uF, 16V, 10%, X5R, 1210 A. Samsung Part Number CL Series Size Dielectric Capacitance Capacitance tolerance Rated Voltage Thickness 32 A 106 K O T L N N E Samsung Multi-layer Ceramic Capacitor 1210 (inch code) L : 3.20 0.30 W : 2.50 0.20 Low profile Thickness division Ni X5R Inner electrode Cu 10 uF Termination Sn 100% 10 % (Pb Free) Plating Normal Product 16 V Reserved for future use Special 1.60 0.10 Embossed Type, 7" reel Packaging B. Structure & Dimension Dimension() Samsung P/N CL32A106KOTLNNE L W T BW 3.20 0.30 2.50 0.20 1.60 0.10 0.60 0.30 C. Samsung Reliablility Test and Judgement Condition Judgement Capacitance Tan (DF) Insulation Resistance Appearance Withstanding Voltage Temperature Characteristics Adhesive Strength of Termination Bending Strength Solderability Within specified tolerance 0.1 max. Test condition 1 10% / 1.00.2Vrms *A capacitor prior to measuring the capacitance is heat treated at 150+0/-10 for 1hour and maintained in ambient air for 242 hours. 10,000Mohm or 100Mohmx Rated Voltage 60~120 sec. Whichever is smaller No abnormal exterior appearance Microscope (x10) 250% of the rated voltage No dielectric breakdown or mechanical breakdown X5R (From-55 to 85, Capacitance change should be within 15%) No peeling shall be occur on the 500g*f, for 101 sec. terminal electrode Capacitance change : within 12.5% Bending to the limit (1) More than 75% of terminal surface is to be soldered newly with 1.0mm/sec. SnAg3.0Cu0.5 solder 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : within 7.5% Solder pot : 2705, 101sec. Soldering Heat Vibration Test Tan , IR : initial spec. Capacitance change : Tan , IR : initial spec. within 5% Moisture Resistance Capacitance change : within 12.5% Tan : 0.125 max 500Mohm or 12.5Mohm x IR : Whichever is smaller Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours x 3 direction (x, y, z) With rated voltage 402, 90~95%RH, 500+12/-0hrs High Temperature Resistance Capacitance change : within 12.5% Tan : 0.125 max 1,000Mohm or 25Mohm x IR : Whichever is smaller With 150% of the rated voltage Max. operating temperature 1,000+48/-0hrs Temperature Cycling Capacitance change : Tan , IR : initial spec. 1 cycle condition Min. operating temperature Max. operating temperature within 7.5% 5 cycle test The reliability test condition can be replaced by the corresponding accelerated test condition. D. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 2605, 30sec. ) Product specifications included in the specifications are effective as of March 1, 2013. Please be advised that they are standard product specifications for reference only. We may change, modify or discontinue the product specifications without notice at any time. So, you need to approve the product specifications before placing an order. Should you have any question regarding the product specifications, please contact our sales personnel or application engineers. 25 25