4516B-026 - Agere Systems, Inc.

Wideband Photodiode Receivers

Data Sheet

June 2001

Features

■Wide-band analog signal reception

■Single-mode fiber pigtail

■High optical return loss

■Up to 20 GHz bandwidth

■1310 nm and 1550 nm sensitivity

Applications

■Antenna remoting

■Cellular and PCS networks

■Military triband communications

■TT and C

Description

The family of wideband photodiode receivers are ide-

ally suited for use in analog fiber-optic communica-

tions. With their wide bandwidth and flat response,

these devices are used in a wide array of applica-

tions, including antenna remoting, timing and refer-

ence signal distribution, measurement, delay lines,

and two-way communications.

Several packaging styles are available for these

wideband photodiodes. The most basic package, the

photodiode module, contains the photodiode chip ,

optical fiber pigtail, and impedance-matched electri-

cal connections in a hermetically sealed unit. Of par-

ticular note is the high optical return loss, which

enables high-quality noise performance for sensitive

optical links.

2Agere Systems Inc.

Data Sheet

Wideband Photodiode Receivers June 2001

Description (continued)

In most cases, the basic photodiode module is inte-

grated into a complete receiver, packaged either as a

flange-mount for e xtreme environments, or as a plug-in

f or integration with Agere Systems Inc.’s System 10000

rack -mountable chassis and power supplies. Electron-

ics within flange-mount and plug-in receivers provide a

rev erse bias for the photodiodes and monitor the dc

level of the optical input power, thus providing a fully

integrated wideband product.

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso-

lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess

of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended

periods can adversely affect device reliability.

Characteristics

1. Specified for <2 mW optical power, <50% modulation depth.

2. The photodiode RF current splits evenly between the internal matching resistor and the ex ternal load. (See Agere Systems’

System

Designer’s Guide to RF and Wideband Fiber Optic

s.)

3. Optical return loss specified for FC-APC connectors or fusion splices only. Other connection methods can degrade optical return loss.

SMF-28

is a trademark of Corning Incorporated.

Parameter Symbol Min Max Unit

Operating Temperature Range:

Modules and Flange-mount

Plug-ins

TOP –40

070

50 °C

°C

Storage Temperature Range:

Modules and Flange-mount

Plug-ins

Tstg –40

–20 85

65 °C

°C

Input Power:

2510A/B, 2515A.B, 1516A/B/C

2518A/B

PIN 2.0 (typ)

15 2.5

16 mW

Maximum Power for 60 s:

2510A/B, 2515A.B, 1516A/B/C

2518A/B

PMAX —

—4

16 mW

dc Current:

2510A/B, 2515A/B, 1516A/B/C

2518A/B

Idc —

—2

12 mA

Table 1. Optical Characteristics

Package Type Device Code

Module

Flange-Mount Receiver

Plug-in Receiver, for 19 in. rack system

2510A/B1

4510A/B1

10450A/B1

2515A/B1

4515A/B1

10455A/B1

2516A/B/C1

4516A/B/C1

10456A/B/C1

2518A/B

4518A/B

10458A/B

Parameters Specifications

dc Photodiode Responsivity

at 1310 nm, 25 °C >0.75 A/W >0.75 A/W >0.65 A/W >0.70 A/W

RF Receiver Efficiency (typ)

at 1 GHz 2>0.38 >0.38 >0.33 >0.35

Optical Return Loss3>45 dB

Pigtail Fiber Type (where applicable) >1 m, 9 µm/125 µm single-mode

SMF-28

4 or equivalent

Agere Systems Inc.

Data Sheet

June 2001 Wideband Photodiode Receivers

Characteristics (continued)

1. Relativ e to value at 1 GHz.

K-connector

is a trademark of Anr itsu Company. It is a high-speed and SMA-compatible connector.

1. For photodiode module CDC requirements, contact an Agere Systems’ account manager for OEM data sheet.

Table 2. RF Characteristics

Package Type Device Code

Module

Flange-Mount Receiver

Plug -in Rec eiv er (f or 19 in .

rack system)

2510A/B

4510A/B

10450A/B

2515A/B

4515A/B

10455A/B

2516A/B/C

4516A/B/C

10456A/B/C

2518A/B

4518A/B

10458A/B

Parameters Specifications

Maximum F requency:

A Version

B Version

C Version

3 GHz

6 GHz

—

10 GHz

12 GHz

—

20 GHz

18 GHz

15 GHZ

15 GHz

10 GHz

—

Minimum Frequency 0.1 GHz 0.1 GHz 1 GHz 0.5 GHz

Output Coup li ng dc ac ac ac

Amplitude Flatness1±2.0 dB ±2.0 dB ±2.0 dB ±2.0 dB

Output VSWR, Max

2.0:1

2.5:1 0.1—6 GHz

—0.1 GHz—10 GHz

10 GHz—12 GHz 1 GHz —18 GHz

18 GHz— 20 GHz 0.5 GHz—15 GHz

—

Output Impe dan ce 50 Ω

RF Connector for Module SMA (F) SMA (F)

K-connector

RF Connector for Flange-

Mount and Plug-in SMA (F)

Table 3. dc Power for Flange-mount and Plug-ins (45xx and 104xx Receivers)

Parameter Symbol Min Typ Max Unit

dc Power for Flange-mount and Plug-ins

(Models 45xx and 104xx)1: Pin 1 Pdc — 15 nominal

at 0.2 A max —V

4Agere Systems Inc.

Data Sheet

Wideband Photodiode Receivers June 2001

2510A/B, 2515A/B Wideband Photodiode Receivers

Outline Diagram

Dimensions are in inches and (millimeters).

FIBER PI GTAIL 1.33 (34)

0.49

(12) 0.66

(17)

OUTPUT

0.23

(6)

0.42

(11)

ACEH

BDF

7-PIN MINIATURE

RECTANGULAR 1-1192 (F)

Pin Information

Figure 1. 2510A/B Electrical Schematic

Figure 2. 2515A/B Electrical Schematic

Table 4. Seven-pin Connector

Pin No. Description

ANC

BNC

CNC

DNC

EBias

F Ground

HNC

PIN PHOTODIODE RF

OUT

Ω

HFEDCBA

1-1194 (F)

OUT

Ω

HFEDCBA

PHOTODIODE

Ω

130 pF

1-1194 (F)

Agere Systems Inc.

Data Sheet

June 2001 Wideband Photodiode Receivers

2516A/B, 2518A/B Wideband Photodiode Receivers

Outline Diagram

Dimensions are in inches and (millimeters).

0.15

(4)

0.10

(2.5)

0.04

(1) 0.174

(4.4)

0.41

(10)

Ø.094 (2.4)

0.26

(6.7)

1.24 (32)

0.84 (21)

0.10 (2.5)

0.20 (5)

0.78

(20)

0.58

(15)

0.39

(10)

0.20

(5)

K-CONNECTOR

PIN 1

1.04 (26)

Pin Information

Figure 3. 2516A/B, 2518A/B Electrical Schematic

Table 5. Six-pin Connector

Pin No. Description

1NC

2NC

3NC

4Bias

5NC

6 Ground

50 Ω

150 Ω

VBIAS

OUT

1-1195 (F)

1-1193 (F)

6Agere Systems Inc.

Data Sheet

Wideband Photodiode Receivers June 2001

45XX, 104xx Wideband Photodiode Receivers

45xx Outline Diagram (Dimensions are in inches and (millimeters).)

104xx Outline Diagram (Dimensions are in inches and (millimeters).)

OPTICAL

5.60 (142)

6.00 (152)

0.20 (5)

0.38

(10)

2.13

(54)

4.25

(108)

5.00

(127)

Ø.12 (3)

RF OU T

SMA (F) dc CONNECTOR

9-PIN D-SUB (M)

1.50

(38)

0.12 (3)

POWER

1-1191 (F)

POWER

OPTICAL

POWER

FIBER-OPTIC

RECEIVER

OPTICAL

RF OUT

dc CONNE CTOR

9-PIN D-SUB (M)

9.12 (232)

5.06

(129)

FRONT

PANEL

1.39

(35)

1-1189 (F)c

Pin Information

1. Open collector outputs.

Front Panel LEDs

■Power on

■Optical power received (plug-ins only)

dc Moni to r Voltages

■dc photocurrent (Pin 6): 1 V/mA

Alarm Circuits

The alarm is an open collector output capable of sink-

ing 20 mA when active and withstanding 15 V when off .

It can be used for remote drive of relays or LEDs.

Table 6. Nine-Pin D-sub Connector

Pin No. Descript ion

115 Vdc

2NC

3NC

4 Power Ground

5 Ref. Ground

6 Optical Current Monitor

7Low Optical Power Alarm

8NC

9NC

Agere Systems Inc.

Data Sheet

June 2001 Wideband Photodiode Receivers

Ordering Information

1. FC/SPC connectors are a higher grade version of FC/PC connectors and are compatible with them.

1. F or additional ordering inf ormation, please contact an account manager at OPT O W est, Agere Systems Inc., 1-800-362-3891 (for sa l e s s ta f f,

please press option 2).

Table 7. Wideband Photodiode Receiver Options

Option No. Connector/Pigtail Package Type

Module Flange Plug-in

-020 FC/APC Bulkhead Optical Connector — x x

-021 FC/SPC Bulkhead Optical Connector1—x x

-022 FC/APC Optical Connector/3 mm Fiber Cable Pigtail — x —

-023 FC/SPC Optical Connector/3 mm Fiber Cable Pigtail — x —

-026 FC/PC Bulkhead Optical Connector — x x

-028 FC/PC Optical Connector/3 mm Fiber Cable Pigtail — x —

-030 No Optical Connector/900 µm Buffered Fiber Pigtail x — —

-031 FC/PC Optical Connector/900 µm Buffered Fiber Pigtail x — —

-032 FC/APC Optical Connector/900 µm Buffered Fiber Pigtail x — —

Table 8. Ordering Inform ation 1

Device Code Description Package Type Comcode

2510A Wideband Photodiode Receiver Module TBD

2510B Module TBD

2515A Module TBD

2515B Module TBD

2516A Module TBD

2516B Module TBD

2516C Module TBD

2518A Module TBD

2518B Module TBD

4510A Flange-Mount TBD

4510B Flange-Mount TBD

4515A Flange-Mount TBD

4515B Flange-Mount TBD

4516A Flange-Mount TBD

4516B Flange-Mount TBD

4516C Flange-Mount TBD

4518A Flange-Mount TBD

4518B Flange-Mount TBD

10450A Plug-in, for 19 in. Rack System TBD

10450B Plug-in, for 19 in. Rack System TBD

10455A Plug-in, for 19 in. Rack System TBD

10455B Plug-in, for 19 in. Rack System TBD

10456A Plug-in, for 19 in. Rack System TBD

10456B Plug-in, for 19 in. Rack System TBD

10456C Plug-in, for 19 in. Rack System TBD

10458A Plug-in, for 19 in. Rack System TBD

10458B Plug-in, for 19 in. Rack System TBD

Data Sheet

Wideband Photodiode Receivers June 2001

For additional informatio n, co nta ct you r Agere Systems Account Manager or the follow ing:

INTERNET: http://www.agere.com

E-MAIL: docmaster@micro.lucent.com

N. AMERICA: Agere Systems Inc., 555 Union Boulevard, Room 30L-15P-BA, Allentown, PA 18109-3286

1-800-372-2447, FAX 610-71 2-41 06 (I n CANADA: 1-800-553-2448, FAX 610-712-4106)

ASIA PACIFIC: Agere Systems Singa pore Pte. Ltd., 77 Science Park Drive, #03-18 Cintech III, Singapore 118256

Tel. (65) 778 8833, FAX (65) 777 7495

CHINA: Agere Systems (Shanghai) Co., Ltd., 33/F Jin Mao Tower, 88 Century Boulevard Pudong, Shanghai 200121 PRC

Tel. (86) 21 50471212, FAX (86) 21 50472266

JAPAN: Agere Syste ms Japan Ltd., 7-18, Higashi-Go tan da 2-c home, Shinagawa-ku, Tokyo 141, Japan

Tel. (81) 3 5421 1600, FAX (81) 3 5421 1700

EUROPE: Data Requests: DATALINE: Tel. (44) 7000 582 368, FAX (44) 1189 328 148

Technical Inquiries: OPTOELECTRONICS MARKETING: (4 4) 13 44 865 900 (Ascot UK)

Agere Systems Inc. reserves the right to make changes to the product(s) or infor mation contained herein without notice. No liability is assumed as a result of their use or application.

June 2001

DS00-305OPTO-1 (Replaces DS00-305OPTO )