13
LED1
LED2
SCHEMATIC 6N1
RJ-5 R3
RJ-8
RJ-7
RJ-6
RXN
SHIELD
12
R4
RJ-4
RJ-3
RJ-2
RJ-1
RXP
TXN
TXP CMC1
SHIELD
14
TCT RCT RDN RDP
R9
R8
34
CMC2
T2
C2
56
C1
R5
See Table
R1 R7
T1
R6
1CT:1CT
R10
7
R2
TDP
12 11 TDN
10 9 8
Part TX Turns Ratio
Number (Chip:Cable) R5 R6 R7 R8 R9 R10
RJ612 1.41:1 51 100 100 56 22 22
RJ612-12 1.25:1 39 86 86 60 20 20
10/100 Part Nu mber Table
2200
1. R1-R 4 = 75 Ohms, 1/ 16 W, 5%
2. R5 - R10 - See table for resistance values ±1%
3. C1,C2 = 0.1uF, 50V
4. C3 is an optional 1000pF, 2KV de-coupling capacitor
which is included with the -C suffix.
Notes:
Note 4
General Features:
-Patented Product
-Single Port Surface Mount
-UL Recognized Component;
File # E203973
-Models to Support Most Popular
Phy Chips
-Meets IEEE 802.3 and ANSI X3.263
Requirements.
-Includes integrated LEDs. LED signal
leads are isolated from the Ethernet
signal leads to reduce EMI
and crosstalk.
-Signal routing is designed for NIC
applications. See datasheet
RJ6XX-Schematic 6H1 for Hub signal
routing.
-Other signal routing is available. Please
contact the factory at the numbers listed
below.
-Standard LEDs are green. For other
LED options, see the
RJ6xx - LED Options datasheet.
10/100 Magnetics, SMT Single Port RJ45 Package
RJ6xx Schematic 6N1, Rev. G 03 Oct 00
(xx equals one of the circuit numbers in the table below the schematic)
Other circuit schematics are available. Please contact us at (800) 511-7308 or visit
our web site at www.trans-power.com.
See RJ6xx Mechanical
datasheet for mechanical
specifications
80.1 MH z - 100.0 M Hz 1.1 12.0 38.0 42.0 33.0
60.1 MHz - 80.0 MHz 1.1 15.0 38.0 42.0 33.0
15.1 MHz - 60.0 MHz 0.6 18.0 43.0 46.0 35.0
1.0 MHz - 15.0 MHz 0.3 18.0 43.0 46.0 35.0
.100 MHz - .999 MHz 1.0 18.0 43.0 46.0 35.0
(dB MIN)
10/100 ETHERNET ELECTRICAL CHARACTERISTICS @ 25°C
Attenuation
Crosstalk
* Indicated In ser t ion Loss refers to magneti c circuit ry only.
Frequency Insertion Loss
(dB MAX) * Return Loss
(dB MIN)
Inductance:
Dielectric Isolation:
LED Forward Current:
Rise time (10 - 90%):
350uH Min with 8mA DC Bias, 0°C - 70°C
Circui ts without the 100 0pF capacitor is 1500 Vrms minimum
5 mA typical @ 3.3 VDC
2.5 n S ec ty pic al
RX CMRR
(dB MIN)
TX CMRR (dB MIN)
1800
Circui ts with the 1000pF cap acitor is 2250 VDC minimum
Transpower Technologies, Inc., Park Center West Building, 9805 Double R Blvd., Suite #100, Reno, NV 89511
(775) 852-0140 (800) 511-7308 FAX: (775) 852-0145
